2 # Multifunction miscellaneous devices
5 menu "Multifunction device drivers"
13 tristate "Support for Silicon Motion SM501"
15 This is the core driver for the Silicon Motion SM501 multimedia
16 companion chip. This device is a multifunction device which may
17 provide numerous interfaces including USB host controller, USB gadget,
18 asynchronous serial ports, audio functions, and a dual display video
19 interface. The device may be connected by PCI or local bus with
20 varying functions enabled.
23 bool "Export GPIO via GPIO layer"
24 depends on MFD_SM501 && GPIOLIB
26 This option uses the gpio library layer to export the 64 GPIO
27 lines on the SM501. The platform data is used to supply the
28 base number for the first GPIO line to register.
31 bool "Support for Compaq ASIC3"
32 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
34 This driver supports the ASIC3 multifunction chip found on many
35 PDAs (mainly iPAQ and HTC based ones)
37 config MFD_DM355EVM_MSP
38 bool "DaVinci DM355 EVM microcontroller"
39 depends on I2C && MACH_DAVINCI_DM355_EVM
41 This driver supports the MSP430 microcontroller used on these
42 boards. MSP430 firmware manages resets and power sequencing,
43 inputs from buttons and the IR remote, LEDs, an RTC, and more.
46 bool "HTC EGPIO support"
47 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
49 This driver supports the CPLD egpio chip present on
50 several HTC phones. It provides basic support for input
51 pins, output pins, and irqs.
54 tristate "HTC PASIC3 LED/DS1WM chip support"
57 This core driver provides register access for the LED/DS1WM
58 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
59 HTC Magician devices, respectively. Actual functionality is
60 handled by the leds-pasic3 and ds1wm drivers.
63 tristate "Philips UCB1400 Core driver"
67 This enables support for the Philips UCB1400 core functions.
68 The UCB1400 is an AC97 audio codec.
70 To compile this driver as a module, choose M here: the
71 module will be called ucb1400_core.
74 tristate "TPS6501x Power Management chips"
75 depends on I2C && GPIOLIB
76 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
78 If you say yes here you get support for the TPS6501x series of
79 Power Management chips. These include voltage regulators,
80 lithium ion/polymer battery charging, and other features that
81 are often used in portable devices like cell phones and cameras.
83 This driver can also be built as a module. If so, the module
84 will be called tps65010.
87 bool "Texas Instruments TWL92330/Menelaus PM chip"
88 depends on I2C=y && ARCH_OMAP24XX
90 If you say yes here you get support for the Texas Instruments
91 TWL92330/Menelaus Power Management chip. This include voltage
92 regulators, Dual slot memory card transceivers, real-time clock
93 and other features that are often used in portable devices like
97 bool "Texas Instruments TWL4030/TPS659x0 Support"
98 depends on I2C=y && GENERIC_HARDIRQS
100 Say yes here if you have TWL4030 family chip on your board.
101 This core driver provides register access and IRQ handling
102 facilities, and registers devices for the various functions
103 so that function-specific drivers can bind to them.
105 These multi-function chips are found on many OMAP2 and OMAP3
106 boards, providing power management, RTC, GPIO, keypad, a
107 high speed USB OTG transceiver, an audio codec (on most
108 versions) and many other features.
111 bool "Support power resources on TWL4030 family chips"
112 depends on TWL4030_CORE
114 Say yes here if you want to use the power resources on the
115 TWL4030 family chips. Most of these resources are regulators,
116 which have a separate driver; some are control signals, such
117 as clock request handshaking.
119 This driver uses board-specific data to initialize the resources
120 and load scripts controling which resources are switched off/on
121 or reset when a sleep, wakeup or warm reset event occurs.
128 bool "Support Toshiba T7L66XB"
129 depends on ARM && HAVE_CLK
133 Support for Toshiba Mobile IO Controller T7L66XB
136 bool "Support Toshiba TC6387XB"
137 depends on ARM && HAVE_CLK
141 Support for Toshiba Mobile IO Controller TC6387XB
144 bool "Support Toshiba TC6393XB"
145 depends on GPIOLIB && ARM
149 Support for Toshiba Mobile IO Controller TC6393XB
152 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
155 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
156 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
157 usually found on PXA processors-based platforms. This includes
158 the I2C driver and the core APIs _only_, you have to select
159 individual components like LCD backlight, voltage regulators,
160 LEDs and battery-charger under the corresponding menus.
163 tristate "Support Wolfson Microelectronics WM8400"
167 Support for the Wolfson Microelecronics WM8400 PMIC and audio
168 CODEC. This driver adds provides common support for accessing
169 the device, additional drivers must be enabled in order to use
170 the functionality of the device.
175 config MFD_WM8350_CONFIG_MODE_0
177 depends on MFD_WM8350
179 config MFD_WM8350_CONFIG_MODE_1
181 depends on MFD_WM8350
183 config MFD_WM8350_CONFIG_MODE_2
185 depends on MFD_WM8350
187 config MFD_WM8350_CONFIG_MODE_3
189 depends on MFD_WM8350
191 config MFD_WM8351_CONFIG_MODE_0
193 depends on MFD_WM8350
195 config MFD_WM8351_CONFIG_MODE_1
197 depends on MFD_WM8350
199 config MFD_WM8351_CONFIG_MODE_2
201 depends on MFD_WM8350
203 config MFD_WM8351_CONFIG_MODE_3
205 depends on MFD_WM8350
207 config MFD_WM8352_CONFIG_MODE_0
209 depends on MFD_WM8350
211 config MFD_WM8352_CONFIG_MODE_1
213 depends on MFD_WM8350
215 config MFD_WM8352_CONFIG_MODE_2
217 depends on MFD_WM8350
219 config MFD_WM8352_CONFIG_MODE_3
221 depends on MFD_WM8350
223 config MFD_WM8350_I2C
224 tristate "Support Wolfson Microelectronics WM8350 with I2C"
228 The WM8350 is an integrated audio and power management
229 subsystem with watchdog and RTC functionality for embedded
230 systems. This option enables core support for the WM8350 with
231 I2C as the control interface. Additional options must be
232 selected to enable support for the functionality of the chip.
235 tristate "Support for NXP PCF50633"
238 Say yes here if you have NXP PCF50633 chip on your board.
239 This core driver provides register access and IRQ handling
240 facilities, and registers devices for the various functions
241 so that function-specific drivers can bind to them.
244 tristate "Support for NXP PCF50633 ADC"
245 depends on MFD_PCF50633
247 Say yes here if you want to include support for ADC in the
251 tristate "Support for NXP PCF50633 GPIO"
252 depends on MFD_PCF50633
254 Say yes here if you want to include support GPIO for pins on
259 menu "Multimedia Capabilities Port drivers"
260 depends on ARCH_SA1100
267 tristate "Support SA11x0 MCP interface"
268 depends on ARCH_SA1100
273 tristate "Support for UCB1200 / UCB1300"
276 config MCP_UCB1200_TS
277 tristate "Touchscreen interface support"
278 depends on MCP_UCB1200 && INPUT