drivers/i2c/busses/i2c-omap.c

   1 /*
   2  * TI OMAP I2C master mode driver
   3  *
   4  * Copyright (C) 2003 MontaVista Software, Inc.
   5  * Copyright (C) 2005 Nokia Corporation
   6  * Copyright (C) 2004 - 2007 Texas Instruments.
   7  *
   8  * Originally written by MontaVista Software, Inc.
   9  * Additional contributions by:
  10  *      Tony Lindgren <tony@atomide.com>
  11  *      Imre Deak <imre.deak@nokia.com>
  12  *      Juha Yrjölä <juha.yrjola@solidboot.com>
  13  *      Syed Khasim <x0khasim@ti.com>
  14  *      Nishant Menon <nm@ti.com>
  15  *
  16  * This program is free software; you can redistribute it and/or modify
  17  * it under the terms of the GNU General Public License as published by
  18  * the Free Software Foundation; either version 2 of the License, or
  19  * (at your option) any later version.
  20  *
  21  * This program is distributed in the hope that it will be useful,
  22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  24  * GNU General Public License for more details.
  25  *
  26  * You should have received a copy of the GNU General Public License
  27  * along with this program; if not, write to the Free Software
  28  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  29  */
  30
  31 #include <linux/module.h>
  32 #include <linux/delay.h>
  33 #include <linux/i2c.h>
  34 #include <linux/err.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/completion.h>
  37 #include <linux/platform_device.h>
  38 #include <linux/clk.h>
  39 #include <linux/io.h>
  40
  41 /* I2C controller revisions */
  42 #define OMAP_I2C_REV_2                  0x20
  43
  44 /* I2C controller revisions present on specific hardware */
  45 #define OMAP_I2C_REV_ON_2430            0x36
  46 #define OMAP_I2C_REV_ON_3430            0x3C
  47
  48 /* timeout waiting for the controller to respond */
  49 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
  50
  51 #define OMAP_I2C_REV_REG                0x00
  52 #define OMAP_I2C_IE_REG                 0x04
  53 #define OMAP_I2C_STAT_REG               0x08
  54 #define OMAP_I2C_IV_REG                 0x0c
  55 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
  56 #define OMAP_I2C_WE_REG                 0x0c
  57 #define OMAP_I2C_SYSS_REG               0x10
  58 #define OMAP_I2C_BUF_REG                0x14
  59 #define OMAP_I2C_CNT_REG                0x18
  60 #define OMAP_I2C_DATA_REG               0x1c
  61 #define OMAP_I2C_SYSC_REG               0x20
  62 #define OMAP_I2C_CON_REG                0x24
  63 #define OMAP_I2C_OA_REG                 0x28
  64 #define OMAP_I2C_SA_REG                 0x2c
  65 #define OMAP_I2C_PSC_REG                0x30
  66 #define OMAP_I2C_SCLL_REG               0x34
  67 #define OMAP_I2C_SCLH_REG               0x38
  68 #define OMAP_I2C_SYSTEST_REG            0x3c
  69 #define OMAP_I2C_BUFSTAT_REG            0x40
  70
  71 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
  72 #define OMAP_I2C_IE_XDR         (1 << 14)       /* TX Buffer drain int enable */
  73 #define OMAP_I2C_IE_RDR         (1 << 13)       /* RX Buffer drain int enable */
  74 #define OMAP_I2C_IE_XRDY        (1 << 4)        /* TX data ready int enable */
  75 #define OMAP_I2C_IE_RRDY        (1 << 3)        /* RX data ready int enable */
  76 #define OMAP_I2C_IE_ARDY        (1 << 2)        /* Access ready int enable */
  77 #define OMAP_I2C_IE_NACK        (1 << 1)        /* No ack interrupt enable */
  78 #define OMAP_I2C_IE_AL          (1 << 0)        /* Arbitration lost int ena */
  79
  80 /* I2C Status Register (OMAP_I2C_STAT): */
  81 #define OMAP_I2C_STAT_XDR       (1 << 14)       /* TX Buffer draining */
  82 #define OMAP_I2C_STAT_RDR       (1 << 13)       /* RX Buffer draining */
  83 #define OMAP_I2C_STAT_BB        (1 << 12)       /* Bus busy */
  84 #define OMAP_I2C_STAT_ROVR      (1 << 11)       /* Receive overrun */
  85 #define OMAP_I2C_STAT_XUDF      (1 << 10)       /* Transmit underflow */
  86 #define OMAP_I2C_STAT_AAS       (1 << 9)        /* Address as slave */
  87 #define OMAP_I2C_STAT_AD0       (1 << 8)        /* Address zero */
  88 #define OMAP_I2C_STAT_XRDY      (1 << 4)        /* Transmit data ready */
  89 #define OMAP_I2C_STAT_RRDY      (1 << 3)        /* Receive data ready */
  90 #define OMAP_I2C_STAT_ARDY      (1 << 2)        /* Register access ready */
  91 #define OMAP_I2C_STAT_NACK      (1 << 1)        /* No ack interrupt enable */
  92 #define OMAP_I2C_STAT_AL        (1 << 0)        /* Arbitration lost int ena */
  93
  94 /* I2C WE wakeup enable register */
  95 #define OMAP_I2C_WE_XDR_WE      (1 << 14)       /* TX drain wakup */
  96 #define OMAP_I2C_WE_RDR_WE      (1 << 13)       /* RX drain wakeup */
  97 #define OMAP_I2C_WE_AAS_WE      (1 << 9)        /* Address as slave wakeup*/
  98 #define OMAP_I2C_WE_BF_WE       (1 << 8)        /* Bus free wakeup */
  99 #define OMAP_I2C_WE_STC_WE      (1 << 6)        /* Start condition wakeup */
 100 #define OMAP_I2C_WE_GC_WE       (1 << 5)        /* General call wakeup */
 101 #define OMAP_I2C_WE_DRDY_WE     (1 << 3)        /* TX/RX data ready wakeup */
 102 #define OMAP_I2C_WE_ARDY_WE     (1 << 2)        /* Reg access ready wakeup */
 103 #define OMAP_I2C_WE_NACK_WE     (1 << 1)        /* No acknowledgment wakeup */
 104 #define OMAP_I2C_WE_AL_WE       (1 << 0)        /* Arbitration lost wakeup */
 105
 106 #define OMAP_I2C_WE_ALL         (OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \
 107                                 OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \
 108                                 OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \
 109                                 OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \
 110                                 OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE)
 111
 112 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
 113 #define OMAP_I2C_BUF_RDMA_EN    (1 << 15)       /* RX DMA channel enable */
 114 #define OMAP_I2C_BUF_RXFIF_CLR  (1 << 14)       /* RX FIFO Clear */
 115 #define OMAP_I2C_BUF_XDMA_EN    (1 << 7)        /* TX DMA channel enable */
 116 #define OMAP_I2C_BUF_TXFIF_CLR  (1 << 6)        /* TX FIFO Clear */
 117
 118 /* I2C Configuration Register (OMAP_I2C_CON): */
 119 #define OMAP_I2C_CON_EN         (1 << 15)       /* I2C module enable */
 120 #define OMAP_I2C_CON_BE         (1 << 14)       /* Big endian mode */
 121 #define OMAP_I2C_CON_OPMODE_HS  (1 << 12)       /* High Speed support */
 122 #define OMAP_I2C_CON_STB        (1 << 11)       /* Start byte mode (master) */
 123 #define OMAP_I2C_CON_MST        (1 << 10)       /* Master/slave mode */
 124 #define OMAP_I2C_CON_TRX        (1 << 9)        /* TX/RX mode (master only) */
 125 #define OMAP_I2C_CON_XA         (1 << 8)        /* Expand address */
 126 #define OMAP_I2C_CON_RM         (1 << 2)        /* Repeat mode (master only) */
 127 #define OMAP_I2C_CON_STP        (1 << 1)        /* Stop cond (master only) */
 128 #define OMAP_I2C_CON_STT        (1 << 0)        /* Start condition (master) */
 129
 130 /* I2C SCL time value when Master */
 131 #define OMAP_I2C_SCLL_HSSCLL    8
 132 #define OMAP_I2C_SCLH_HSSCLH    8
 133
 134 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
 135 #ifdef DEBUG
 136 #define OMAP_I2C_SYSTEST_ST_EN          (1 << 15)       /* System test enable */
 137 #define OMAP_I2C_SYSTEST_FREE           (1 << 14)       /* Free running mode */
 138 #define OMAP_I2C_SYSTEST_TMODE_MASK     (3 << 12)       /* Test mode select */
 139 #define OMAP_I2C_SYSTEST_TMODE_SHIFT    (12)            /* Test mode select */
 140 #define OMAP_I2C_SYSTEST_SCL_I          (1 << 3)        /* SCL line sense in */
 141 #define OMAP_I2C_SYSTEST_SCL_O          (1 << 2)        /* SCL line drive out */
 142 #define OMAP_I2C_SYSTEST_SDA_I          (1 << 1)        /* SDA line sense in */
 143 #define OMAP_I2C_SYSTEST_SDA_O          (1 << 0)        /* SDA line drive out */
 144 #endif
 145
 146 /* OCP_SYSSTATUS bit definitions */
 147 #define SYSS_RESETDONE_MASK             (1 << 0)
 148
 149 /* OCP_SYSCONFIG bit definitions */
 150 #define SYSC_CLOCKACTIVITY_MASK         (0x3 << 8)
 151 #define SYSC_SIDLEMODE_MASK             (0x3 << 3)
 152 #define SYSC_ENAWAKEUP_MASK             (1 << 2)
 153 #define SYSC_SOFTRESET_MASK             (1 << 1)
 154 #define SYSC_AUTOIDLE_MASK              (1 << 0)
 155
 156 #define SYSC_IDLEMODE_SMART             0x2
 157 #define SYSC_CLOCKACTIVITY_FCLK         0x2
 158
 159
 160 struct omap_i2c_dev {
 161         struct device           *dev;
 162         void __iomem            *base;          /* virtual */
 163         int                     irq;
 164         struct clk              *iclk;          /* Interface clock */
 165         struct clk              *fclk;          /* Functional clock */
 166         struct completion       cmd_complete;
 167         struct resource         *ioarea;
 168         u32                     speed;          /* Speed of bus in Khz */
 169         u16                     cmd_err;
 170         u8                      *buf;
 171         size_t                  buf_len;
 172         struct i2c_adapter      adapter;
 173         u8                      fifo_size;      /* use as flag and value
 174                                                  * fifo_size==0 implies no fifo
 175                                                  * if set, should be trsh+1
 176                                                  */
 177         u8                      rev;
 178         unsigned                b_hw:1;         /* bad h/w fixes */
 179         unsigned                idle:1;
 180         u16                     iestate;        /* Saved interrupt register */
 181 };
 182
 183 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 184                                       int reg, u16 val)
 185 {
 186         __raw_writew(val, i2c_dev->base + reg);
 187 }
 188
 189 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 190 {
 191         return __raw_readw(i2c_dev->base + reg);
 192 }
 193
 194 static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
 195 {
 196         if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 197                 dev->iclk = clk_get(dev->dev, "i2c_ick");
 198                 if (IS_ERR(dev->iclk)) {
 199                         dev->iclk = NULL;
 200                         return -ENODEV;
 201                 }
 202         }
 203
 204         dev->fclk = clk_get(dev->dev, "i2c_fck");
 205         if (IS_ERR(dev->fclk)) {
 206                 if (dev->iclk != NULL) {
 207                         clk_put(dev->iclk);
 208                         dev->iclk = NULL;
 209                 }
 210                 dev->fclk = NULL;
 211                 return -ENODEV;
 212         }
 213
 214         return 0;
 215 }
 216
 217 static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
 218 {
 219         clk_put(dev->fclk);
 220         dev->fclk = NULL;
 221         if (dev->iclk != NULL) {
 222                 clk_put(dev->iclk);
 223                 dev->iclk = NULL;
 224         }
 225 }
 226
 227 static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 228 {
 229         WARN_ON(!dev->idle);
 230
 231         if (dev->iclk != NULL)
 232                 clk_enable(dev->iclk);
 233         clk_enable(dev->fclk);
 234         dev->idle = 0;
 235         if (dev->iestate)
 236                 omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
 237 }
 238
 239 static void omap_i2c_idle(struct omap_i2c_dev *dev)
 240 {
 241         u16 iv;
 242
 243         WARN_ON(dev->idle);
 244
 245         dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
 246         omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
 247         if (dev->rev < OMAP_I2C_REV_2) {
 248                 iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
 249         } else {
 250                 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
 251
 252                 /* Flush posted write before the dev->idle store occurs */
 253                 omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
 254         }
 255         dev->idle = 1;
 256         clk_disable(dev->fclk);
 257         if (dev->iclk != NULL)
 258                 clk_disable(dev->iclk);
 259 }
 260
 261 static int omap_i2c_init(struct omap_i2c_dev *dev)
 262 {
 263         u16 psc = 0, scll = 0, sclh = 0;
 264         u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
 265         unsigned long fclk_rate = 12000000;
 266         unsigned long timeout;
 267         unsigned long internal_clk = 0;
 268
 269         if (dev->rev >= OMAP_I2C_REV_2) {
 270                 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK);
 271                 /* For some reason we need to set the EN bit before the
 272                  * reset done bit gets set. */
 273                 timeout = jiffies + OMAP_I2C_TIMEOUT;
 274                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 275                 while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) &
 276                          SYSS_RESETDONE_MASK)) {
 277                         if (time_after(jiffies, timeout)) {
 278                                 dev_warn(dev->dev, "timeout waiting "
 279                                                 "for controller reset\n");
 280                                 return -ETIMEDOUT;
 281                         }
 282                         msleep(1);
 283                 }
 284
 285                 /* SYSC register is cleared by the reset; rewrite it */
 286                 if (dev->rev == OMAP_I2C_REV_ON_2430) {
 287
 288                         omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
 289                                            SYSC_AUTOIDLE_MASK);
 290
 291                 } else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
 292                         u32 v;
 293
 294                         v = SYSC_AUTOIDLE_MASK;
 295                         v |= SYSC_ENAWAKEUP_MASK;
 296                         v |= (SYSC_IDLEMODE_SMART <<
 297                               __ffs(SYSC_SIDLEMODE_MASK));
 298                         v |= (SYSC_CLOCKACTIVITY_FCLK <<
 299                               __ffs(SYSC_CLOCKACTIVITY_MASK));
 300
 301                         omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, v);
 302                         /*
 303                          * Enabling all wakup sources to stop I2C freezing on
 304                          * WFI instruction.
 305                          * REVISIT: Some wkup sources might not be needed.
 306                          */
 307                         omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
 308                                                         OMAP_I2C_WE_ALL);
 309
 310                 }
 311         }
 312         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 313
 314         if (cpu_class_is_omap1()) {
 315                 struct clk *armxor_ck;
 316
 317                 armxor_ck = clk_get(NULL, "armxor_ck");
 318                 if (IS_ERR(armxor_ck))
 319                         dev_warn(dev->dev, "Could not get armxor_ck\n");
 320                 else {
 321                         fclk_rate = clk_get_rate(armxor_ck);
 322                         clk_put(armxor_ck);
 323                 }
 324                 /* TRM for 5912 says the I2C clock must be prescaled to be
 325                  * between 7 - 12 MHz. The XOR input clock is typically
 326                  * 12, 13 or 19.2 MHz. So we should have code that produces:
 327                  *
 328                  * XOR MHz      Divider         Prescaler
 329                  * 12           1               0
 330                  * 13           2               1
 331                  * 19.2         2               1
 332                  */
 333                 if (fclk_rate > 12000000)
 334                         psc = fclk_rate / 12000000;
 335         }
 336
 337         if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 338
 339                 /* HSI2C controller internal clk rate should be 19.2 Mhz */
 340                 if (dev->speed > 400)
 341                         internal_clk = 19200;
 342                 else if (dev->speed > 100)
 343                         internal_clk = 9600;
 344                 else
 345                         internal_clk = 4000;
 346
 347                 fclk_rate = clk_get_rate(dev->fclk) / 1000;
 348
 349                 /* Compute prescaler divisor */
 350                 psc = fclk_rate / internal_clk;
 351                 psc = psc - 1;
 352
 353                 /* If configured for High Speed */
 354                 if (dev->speed > 400) {
 355                         /* For first phase of HS mode */
 356                         fsscll = internal_clk / (400 * 2) - 6;
 357                         fssclh = internal_clk / (400 * 2) - 6;
 358
 359                         /* For second phase of HS mode */
 360                         hsscll = fclk_rate / (dev->speed * 2) - 6;
 361                         hssclh = fclk_rate / (dev->speed * 2) - 6;
 362                 } else {
 363                         /* To handle F/S modes */
 364                         fsscll = internal_clk / (dev->speed * 2) - 3;
 365                         fssclh = internal_clk / (dev->speed * 2) - 9;
 366                 }
 367                 scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
 368                 sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
 369         } else {
 370                 /* Program desired operating rate */
 371                 fclk_rate /= (psc + 1) * 1000;
 372                 if (psc > 2)
 373                         psc = 2;
 374                 scll = fclk_rate / (dev->speed * 2) - 7 + psc;
 375                 sclh = fclk_rate / (dev->speed * 2) - 7 + psc;
 376         }
 377
 378         /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
 379         omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc);
 380
 381         /* SCL low and high time values */
 382         omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll);
 383         omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh);
 384
 385         if (dev->fifo_size)
 386                 /* Note: setup required fifo size - 1 */
 387                 omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG,
 388                                         (dev->fifo_size - 1) << 8 | /* RTRSH */
 389                                         OMAP_I2C_BUF_RXFIF_CLR |
 390                                         (dev->fifo_size - 1) | /* XTRSH */
 391                                         OMAP_I2C_BUF_TXFIF_CLR);
 392
 393         /* Take the I2C module out of reset: */
 394         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 395
 396         /* Enable interrupts */
 397         omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
 398                         (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
 399                         OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
 400                         OMAP_I2C_IE_AL)  | ((dev->fifo_size) ?
 401                                 (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0));
 402         return 0;
 403 }
 404
 405 /*
 406  * Waiting on Bus Busy
 407  */
 408 static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev)
 409 {
 410         unsigned long timeout;
 411
 412         timeout = jiffies + OMAP_I2C_TIMEOUT;
 413         while (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
 414                 if (time_after(jiffies, timeout)) {
 415                         dev_warn(dev->dev, "timeout waiting for bus ready\n");
 416                         return -ETIMEDOUT;
 417                 }
 418                 msleep(1);
 419         }
 420
 421         return 0;
 422 }
 423
 424 /*
 425  * Low level master read/write transaction.
 426  */
 427 static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 428                              struct i2c_msg *msg, int stop)
 429 {
 430         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
 431         int r;
 432         u16 w;
 433
 434         dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
 435                 msg->addr, msg->len, msg->flags, stop);
 436
 437         if (msg->len == 0)
 438                 return -EINVAL;
 439
 440         omap_i2c_write_reg(dev, OMAP_I2C_SA_REG, msg->addr);
 441
 442         /* REVISIT: Could the STB bit of I2C_CON be used with probing? */
 443         dev->buf = msg->buf;
 444         dev->buf_len = msg->len;
 445
 446         omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
 447
 448         /* Clear the FIFO Buffers */
 449         w = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG);
 450         w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
 451         omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w);
 452
 453         init_completion(&dev->cmd_complete);
 454         dev->cmd_err = 0;
 455
 456         w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
 457
 458         /* High speed configuration */
 459         if (dev->speed > 400)
 460                 w |= OMAP_I2C_CON_OPMODE_HS;
 461
 462         if (msg->flags & I2C_M_TEN)
 463                 w |= OMAP_I2C_CON_XA;
 464         if (!(msg->flags & I2C_M_RD))
 465                 w |= OMAP_I2C_CON_TRX;
 466
 467         if (!dev->b_hw && stop)
 468                 w |= OMAP_I2C_CON_STP;
 469
 470         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 471
 472         /*
 473          * Don't write stt and stp together on some hardware.
 474          */
 475         if (dev->b_hw && stop) {
 476                 unsigned long delay = jiffies + OMAP_I2C_TIMEOUT;
 477                 u16 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
 478                 while (con & OMAP_I2C_CON_STT) {
 479                         con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
 480
 481                         /* Let the user know if i2c is in a bad state */
 482                         if (time_after(jiffies, delay)) {
 483                                 dev_err(dev->dev, "controller timed out "
 484                                 "waiting for start condition to finish\n");
 485                                 return -ETIMEDOUT;
 486                         }
 487                         cpu_relax();
 488                 }
 489
 490                 w |= OMAP_I2C_CON_STP;
 491                 w &= ~OMAP_I2C_CON_STT;
 492                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 493         }
 494
 495         /*
 496          * REVISIT: We should abort the transfer on signals, but the bus goes
 497          * into arbitration and we're currently unable to recover from it.
 498          */
 499         r = wait_for_completion_timeout(&dev->cmd_complete,
 500                                         OMAP_I2C_TIMEOUT);
 501         dev->buf_len = 0;
 502         if (r < 0)
 503                 return r;
 504         if (r == 0) {
 505                 dev_err(dev->dev, "controller timed out\n");
 506                 omap_i2c_init(dev);
 507                 return -ETIMEDOUT;
 508         }
 509
 510         if (likely(!dev->cmd_err))
 511                 return 0;
 512
 513         /* We have an error */
 514         if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
 515                             OMAP_I2C_STAT_XUDF)) {
 516                 omap_i2c_init(dev);
 517                 return -EIO;
 518         }
 519
 520         if (dev->cmd_err & OMAP_I2C_STAT_NACK) {
 521                 if (msg->flags & I2C_M_IGNORE_NAK)
 522                         return 0;
 523                 if (stop) {
 524                         w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
 525                         w |= OMAP_I2C_CON_STP;
 526                         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 527                 }
 528                 return -EREMOTEIO;
 529         }
 530         return -EIO;
 531 }
 532
 533
 534 /*
 535  * Prepare controller for a transaction and call omap_i2c_xfer_msg
 536  * to do the work during IRQ processing.
 537  */
 538 static int
 539 omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 540 {
 541         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
 542         int i;
 543         int r;
 544
 545         omap_i2c_unidle(dev);
 546
 547         r = omap_i2c_wait_for_bb(dev);
 548         if (r < 0)
 549                 goto out;
 550
 551         for (i = 0; i < num; i++) {
 552                 r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
 553                 if (r != 0)
 554                         break;
 555         }
 556
 557         if (r == 0)
 558                 r = num;
 559 out:
 560         omap_i2c_idle(dev);
 561         return r;
 562 }
 563
 564 static u32
 565 omap_i2c_func(struct i2c_adapter *adap)
 566 {
 567         return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
 568 }
 569
 570 static inline void
 571 omap_i2c_complete_cmd(struct omap_i2c_dev *dev, u16 err)
 572 {
 573         dev->cmd_err |= err;
 574         complete(&dev->cmd_complete);
 575 }
 576
 577 static inline void
 578 omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
 579 {
 580         omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 581 }
 582
 583 /* rev1 devices are apparently only on some 15xx */
 584 #ifdef CONFIG_ARCH_OMAP15XX
 585
 586 static irqreturn_t
 587 omap_i2c_rev1_isr(int this_irq, void *dev_id)
 588 {
 589         struct omap_i2c_dev *dev = dev_id;
 590         u16 iv, w;
 591
 592         if (dev->idle)
 593                 return IRQ_NONE;
 594
 595         iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
 596         switch (iv) {
 597         case 0x00:      /* None */
 598                 break;
 599         case 0x01:      /* Arbitration lost */
 600                 dev_err(dev->dev, "Arbitration lost\n");
 601                 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
 602                 break;
 603         case 0x02:      /* No acknowledgement */
 604                 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
 605                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP);
 606                 break;
 607         case 0x03:      /* Register access ready */
 608                 omap_i2c_complete_cmd(dev, 0);
 609                 break;
 610         case 0x04:      /* Receive data ready */
 611                 if (dev->buf_len) {
 612                         w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
 613                         *dev->buf++ = w;
 614                         dev->buf_len--;
 615                         if (dev->buf_len) {
 616                                 *dev->buf++ = w >> 8;
 617                                 dev->buf_len--;
 618                         }
 619                 } else
 620                         dev_err(dev->dev, "RRDY IRQ while no data requested\n");
 621                 break;
 622         case 0x05:      /* Transmit data ready */
 623                 if (dev->buf_len) {
 624                         w = *dev->buf++;
 625                         dev->buf_len--;
 626                         if (dev->buf_len) {
 627                                 w |= *dev->buf++ << 8;
 628                                 dev->buf_len--;
 629                         }
 630                         omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 631                 } else
 632                         dev_err(dev->dev, "XRDY IRQ while no data to send\n");
 633                 break;
 634         default:
 635                 return IRQ_NONE;
 636         }
 637
 638         return IRQ_HANDLED;
 639 }
 640 #else
 641 #define omap_i2c_rev1_isr               NULL
 642 #endif
 643
 644 static irqreturn_t
 645 omap_i2c_isr(int this_irq, void *dev_id)
 646 {
 647         struct omap_i2c_dev *dev = dev_id;
 648         u16 bits;
 649         u16 stat, w;
 650         int err, count = 0;
 651
 652         if (dev->idle)
 653                 return IRQ_NONE;
 654
 655         bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
 656         while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
 657                 dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
 658                 if (count++ == 100) {
 659                         dev_warn(dev->dev, "Too much work in one IRQ\n");
 660                         break;
 661                 }
 662
 663                 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 664
 665                 err = 0;
 666                 if (stat & OMAP_I2C_STAT_NACK) {
 667                         err |= OMAP_I2C_STAT_NACK;
 668                         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
 669                                            OMAP_I2C_CON_STP);
 670                 }
 671                 if (stat & OMAP_I2C_STAT_AL) {
 672                         dev_err(dev->dev, "Arbitration lost\n");
 673                         err |= OMAP_I2C_STAT_AL;
 674                 }
 675                 if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
 676                                         OMAP_I2C_STAT_AL))
 677                         omap_i2c_complete_cmd(dev, err);
 678                 if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
 679                         u8 num_bytes = 1;
 680                         if (dev->fifo_size) {
 681                                 if (stat & OMAP_I2C_STAT_RRDY)
 682                                         num_bytes = dev->fifo_size;
 683                                 else
 684                                         num_bytes = (omap_i2c_read_reg(dev,
 685                                                         OMAP_I2C_BUFSTAT_REG)
 686                                                         >> 8) & 0x3F;
 687                         }
 688                         while (num_bytes) {
 689                                 num_bytes--;
 690                                 w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
 691                                 if (dev->buf_len) {
 692                                         *dev->buf++ = w;
 693                                         dev->buf_len--;
 694                                         /* Data reg from 2430 is 8 bit wide */
 695                                         if (!cpu_is_omap2430() &&
 696                                                         !cpu_is_omap34xx()) {
 697                                                 if (dev->buf_len) {
 698                                                         *dev->buf++ = w >> 8;
 699                                                         dev->buf_len--;
 700                                                 }
 701                                         }
 702                                 } else {
 703                                         if (stat & OMAP_I2C_STAT_RRDY)
 704                                                 dev_err(dev->dev,
 705                                                         "RRDY IRQ while no data"
 706                                                                 " requested\n");
 707                                         if (stat & OMAP_I2C_STAT_RDR)
 708                                                 dev_err(dev->dev,
 709                                                         "RDR IRQ while no data"
 710                                                                 " requested\n");
 711                                         break;
 712                                 }
 713                         }
 714                         omap_i2c_ack_stat(dev,
 715                                 stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR));
 716                         continue;
 717                 }
 718                 if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) {
 719                         u8 num_bytes = 1;
 720                         if (dev->fifo_size) {
 721                                 if (stat & OMAP_I2C_STAT_XRDY)
 722                                         num_bytes = dev->fifo_size;
 723                                 else
 724                                         num_bytes = (omap_i2c_read_reg(dev,
 725                                                         OMAP_I2C_BUFSTAT_REG))
 726                                                         & 0x3F;
 727                         }
 728                         while (num_bytes) {
 729                                 num_bytes--;
 730                                 w = 0;
 731                                 if (dev->buf_len) {
 732                                         w = *dev->buf++;
 733                                         dev->buf_len--;
 734                                         /* Data reg from  2430 is 8 bit wide */
 735                                         if (!cpu_is_omap2430() &&
 736                                                         !cpu_is_omap34xx()) {
 737                                                 if (dev->buf_len) {
 738                                                         w |= *dev->buf++ << 8;
 739                                                         dev->buf_len--;
 740                                                 }
 741                                         }
 742                                 } else {
 743                                         if (stat & OMAP_I2C_STAT_XRDY)
 744                                                 dev_err(dev->dev,
 745                                                         "XRDY IRQ while no "
 746                                                         "data to send\n");
 747                                         if (stat & OMAP_I2C_STAT_XDR)
 748                                                 dev_err(dev->dev,
 749                                                         "XDR IRQ while no "
 750                                                         "data to send\n");
 751                                         break;
 752                                 }
 753                                 omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 754                         }
 755                         omap_i2c_ack_stat(dev,
 756                                 stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
 757                         continue;
 758                 }
 759                 if (stat & OMAP_I2C_STAT_ROVR) {
 760                         dev_err(dev->dev, "Receive overrun\n");
 761                         dev->cmd_err |= OMAP_I2C_STAT_ROVR;
 762                 }
 763                 if (stat & OMAP_I2C_STAT_XUDF) {
 764                         dev_err(dev->dev, "Transmit underflow\n");
 765                         dev->cmd_err |= OMAP_I2C_STAT_XUDF;
 766                 }
 767         }
 768
 769         return count ? IRQ_HANDLED : IRQ_NONE;
 770 }
 771
 772 static const struct i2c_algorithm omap_i2c_algo = {
 773         .master_xfer    = omap_i2c_xfer,
 774         .functionality  = omap_i2c_func,
 775 };
 776
 777 static int __init
 778 omap_i2c_probe(struct platform_device *pdev)
 779 {
 780         struct omap_i2c_dev     *dev;
 781         struct i2c_adapter      *adap;
 782         struct resource         *mem, *irq, *ioarea;
 783         void *isr;
 784         int r;
 785         u32 speed = 0;
 786
 787         /* NOTE: driver uses the static register mapping */
 788         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 789         if (!mem) {
 790                 dev_err(&pdev->dev, "no mem resource?\n");
 791                 return -ENODEV;
 792         }
 793         irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 794         if (!irq) {
 795                 dev_err(&pdev->dev, "no irq resource?\n");
 796                 return -ENODEV;
 797         }
 798
 799         ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
 800                         pdev->name);
 801         if (!ioarea) {
 802                 dev_err(&pdev->dev, "I2C region already claimed\n");
 803                 return -EBUSY;
 804         }
 805
 806         dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL);
 807         if (!dev) {
 808                 r = -ENOMEM;
 809                 goto err_release_region;
 810         }
 811
 812         if (pdev->dev.platform_data != NULL)
 813                 speed = *(u32 *)pdev->dev.platform_data;
 814         else
 815                 speed = 100;    /* Defualt speed */
 816
 817         dev->speed = speed;
 818         dev->idle = 1;
 819         dev->dev = &pdev->dev;
 820         dev->irq = irq->start;
 821         dev->base = ioremap(mem->start, mem->end - mem->start + 1);
 822         if (!dev->base) {
 823                 r = -ENOMEM;
 824                 goto err_free_mem;
 825         }
 826
 827         platform_set_drvdata(pdev, dev);
 828
 829         if ((r = omap_i2c_get_clocks(dev)) != 0)
 830                 goto err_iounmap;
 831
 832         omap_i2c_unidle(dev);
 833
 834         dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 835
 836         if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 837                 u16 s;
 838
 839                 /* Set up the fifo size - Get total size */
 840                 s = (omap_i2c_read_reg(dev, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3;
 841                 dev->fifo_size = 0x8 << s;
 842
 843                 /*
 844                  * Set up notification threshold as half the total available
 845                  * size. This is to ensure that we can handle the status on int
 846                  * call back latencies.
 847                  */
 848                 dev->fifo_size = (dev->fifo_size / 2);
 849                 dev->b_hw = 1; /* Enable hardware fixes */
 850         }
 851
 852         /* reset ASAP, clearing any IRQs */
 853         omap_i2c_init(dev);
 854
 855         isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr;
 856         r = request_irq(dev->irq, isr, 0, pdev->name, dev);
 857
 858         if (r) {
 859                 dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
 860                 goto err_unuse_clocks;
 861         }
 862
 863         dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
 864                  pdev->id, dev->rev >> 4, dev->rev & 0xf, dev->speed);
 865
 866         omap_i2c_idle(dev);
 867
 868         adap = &dev->adapter;
 869         i2c_set_adapdata(adap, dev);
 870         adap->owner = THIS_MODULE;
 871         adap->class = I2C_CLASS_HWMON;
 872         strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
 873         adap->algo = &omap_i2c_algo;
 874         adap->dev.parent = &pdev->dev;
 875
 876         /* i2c device drivers may be active on return from add_adapter() */
 877         adap->nr = pdev->id;
 878         r = i2c_add_numbered_adapter(adap);
 879         if (r) {
 880                 dev_err(dev->dev, "failure adding adapter\n");
 881                 goto err_free_irq;
 882         }
 883
 884         return 0;
 885
 886 err_free_irq:
 887         free_irq(dev->irq, dev);
 888 err_unuse_clocks:
 889         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 890         omap_i2c_idle(dev);
 891         omap_i2c_put_clocks(dev);
 892 err_iounmap:
 893         iounmap(dev->base);
 894 err_free_mem:
 895         platform_set_drvdata(pdev, NULL);
 896         kfree(dev);
 897 err_release_region:
 898         release_mem_region(mem->start, (mem->end - mem->start) + 1);
 899
 900         return r;
 901 }
 902
 903 static int
 904 omap_i2c_remove(struct platform_device *pdev)
 905 {
 906         struct omap_i2c_dev     *dev = platform_get_drvdata(pdev);
 907         struct resource         *mem;
 908
 909         platform_set_drvdata(pdev, NULL);
 910
 911         free_irq(dev->irq, dev);
 912         i2c_del_adapter(&dev->adapter);
 913         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 914         omap_i2c_put_clocks(dev);
 915         iounmap(dev->base);
 916         kfree(dev);
 917         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 918         release_mem_region(mem->start, (mem->end - mem->start) + 1);
 919         return 0;
 920 }
 921
 922 static struct platform_driver omap_i2c_driver = {
 923         .probe          = omap_i2c_probe,
 924         .remove         = omap_i2c_remove,
 925         .driver         = {
 926                 .name   = "i2c_omap",
 927                 .owner  = THIS_MODULE,
 928         },
 929 };
 930
 931 /* I2C may be needed to bring up other drivers */
 932 static int __init
 933 omap_i2c_init_driver(void)
 934 {
 935         return platform_driver_register(&omap_i2c_driver);
 936 }
 937 subsys_initcall(omap_i2c_init_driver);
 938
 939 static void __exit omap_i2c_exit_driver(void)
 940 {
 941         platform_driver_unregister(&omap_i2c_driver);
 942 }
 943 module_exit(omap_i2c_exit_driver);
 944
 945 MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
 946 MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
 947 MODULE_LICENSE("GPL");
 948 MODULE_ALIAS("platform:i2c_omap");