drivers/i2c/busses/i2c-omap.c

   1 /*
   2  * TI OMAP I2C master mode driver
   3  *
   4  * Copyright (C) 2003 MontaVista Software, Inc.
   5  * Copyright (C) 2004 Texas Instruments.
   6  *
   7  * Updated to work with multiple I2C interfaces on 24xx by
   8  * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
   9  * Copyright (C) 2005 Nokia Corporation
  10  *
  11  * Cleaned up by Juha Yrjölä <juha.yrjola@nokia.com>
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License as published by
  15  * the Free Software Foundation; either version 2 of the License, or
  16  * (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  */
  27
  28 #include <linux/module.h>
  29 #include <linux/delay.h>
  30 #include <linux/i2c.h>
  31 #include <linux/err.h>
  32 #include <linux/interrupt.h>
  33 #include <linux/completion.h>
  34 #include <linux/platform_device.h>
  35 #include <linux/clk.h>
  36
  37 #include <asm/io.h>
  38
  39 /* timeout waiting for the controller to respond */
  40 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
  41
  42 #define OMAP_I2C_REV_REG                0x00
  43 #define OMAP_I2C_IE_REG                 0x04
  44 #define OMAP_I2C_STAT_REG               0x08
  45 #define OMAP_I2C_IV_REG                 0x0c
  46 #define OMAP_I2C_SYSS_REG               0x10
  47 #define OMAP_I2C_BUF_REG                0x14
  48 #define OMAP_I2C_CNT_REG                0x18
  49 #define OMAP_I2C_DATA_REG               0x1c
  50 #define OMAP_I2C_SYSC_REG               0x20
  51 #define OMAP_I2C_CON_REG                0x24
  52 #define OMAP_I2C_OA_REG                 0x28
  53 #define OMAP_I2C_SA_REG                 0x2c
  54 #define OMAP_I2C_PSC_REG                0x30
  55 #define OMAP_I2C_SCLL_REG               0x34
  56 #define OMAP_I2C_SCLH_REG               0x38
  57 #define OMAP_I2C_SYSTEST_REG            0x3c
  58 #define OMAP_I2C_BUFSTAT_REG            0x40
  59
  60 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
  61 #define OMAP_I2C_IE_XDR         (1 << 14)       /* TX Buffer drain int enable */
  62 #define OMAP_I2C_IE_RDR         (1 << 13)       /* RX Buffer drain int enable */
  63 #define OMAP_I2C_IE_XRDY        (1 << 4)        /* TX data ready int enable */
  64 #define OMAP_I2C_IE_RRDY        (1 << 3)        /* RX data ready int enable */
  65 #define OMAP_I2C_IE_ARDY        (1 << 2)        /* Access ready int enable */
  66 #define OMAP_I2C_IE_NACK        (1 << 1)        /* No ack interrupt enable */
  67 #define OMAP_I2C_IE_AL          (1 << 0)        /* Arbitration lost int ena */
  68
  69 /* I2C Status Register (OMAP_I2C_STAT): */
  70 #define OMAP_I2C_STAT_XDR       (1 << 14)       /* TX Buffer draining */
  71 #define OMAP_I2C_STAT_RDR       (1 << 13)       /* RX Buffer draining */
  72 #define OMAP_I2C_STAT_BB        (1 << 12)       /* Bus busy */
  73 #define OMAP_I2C_STAT_ROVR      (1 << 11)       /* Receive overrun */
  74 #define OMAP_I2C_STAT_XUDF      (1 << 10)       /* Transmit underflow */
  75 #define OMAP_I2C_STAT_AAS       (1 << 9)        /* Address as slave */
  76 #define OMAP_I2C_STAT_AD0       (1 << 8)        /* Address zero */
  77 #define OMAP_I2C_STAT_XRDY      (1 << 4)        /* Transmit data ready */
  78 #define OMAP_I2C_STAT_RRDY      (1 << 3)        /* Receive data ready */
  79 #define OMAP_I2C_STAT_ARDY      (1 << 2)        /* Register access ready */
  80 #define OMAP_I2C_STAT_NACK      (1 << 1)        /* No ack interrupt enable */
  81 #define OMAP_I2C_STAT_AL        (1 << 0)        /* Arbitration lost int ena */
  82
  83 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
  84 #define OMAP_I2C_BUF_RDMA_EN    (1 << 15)       /* RX DMA channel enable */
  85 #define OMAP_I2C_BUF_RXFIF_CLR  (1 << 14)       /* RX FIFO Clear */
  86 #define OMAP_I2C_BUF_XDMA_EN    (1 << 7)        /* TX DMA channel enable */
  87 #define OMAP_I2C_BUF_TXFIF_CLR  (1 << 6)        /* TX FIFO Clear */
  88
  89 /* I2C Configuration Register (OMAP_I2C_CON): */
  90 #define OMAP_I2C_CON_EN         (1 << 15)       /* I2C module enable */
  91 #define OMAP_I2C_CON_BE         (1 << 14)       /* Big endian mode */
  92 #define OMAP_I2C_CON_OPMODE_HS  (1 << 12)       /* High Speed support */
  93 #define OMAP_I2C_CON_STB        (1 << 11)       /* Start byte mode (master) */
  94 #define OMAP_I2C_CON_MST        (1 << 10)       /* Master/slave mode */
  95 #define OMAP_I2C_CON_TRX        (1 << 9)        /* TX/RX mode (master only) */
  96 #define OMAP_I2C_CON_XA         (1 << 8)        /* Expand address */
  97 #define OMAP_I2C_CON_RM         (1 << 2)        /* Repeat mode (master only) */
  98 #define OMAP_I2C_CON_STP        (1 << 1)        /* Stop cond (master only) */
  99 #define OMAP_I2C_CON_STT        (1 << 0)        /* Start condition (master) */
 100
 101 /* I2C SCL time value when Master */
 102 #define OMAP_I2C_SCLL_HSSCLL    8
 103 #define OMAP_I2C_SCLH_HSSCLH    8
 104
 105 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
 106 #ifdef DEBUG
 107 #define OMAP_I2C_SYSTEST_ST_EN          (1 << 15)       /* System test enable */
 108 #define OMAP_I2C_SYSTEST_FREE           (1 << 14)       /* Free running mode */
 109 #define OMAP_I2C_SYSTEST_TMODE_MASK     (3 << 12)       /* Test mode select */
 110 #define OMAP_I2C_SYSTEST_TMODE_SHIFT    (12)            /* Test mode select */
 111 #define OMAP_I2C_SYSTEST_SCL_I          (1 << 3)        /* SCL line sense in */
 112 #define OMAP_I2C_SYSTEST_SCL_O          (1 << 2)        /* SCL line drive out */
 113 #define OMAP_I2C_SYSTEST_SDA_I          (1 << 1)        /* SDA line sense in */
 114 #define OMAP_I2C_SYSTEST_SDA_O          (1 << 0)        /* SDA line drive out */
 115 #endif
 116
 117 /* I2C System Status register (OMAP_I2C_SYSS): */
 118 #define OMAP_I2C_SYSS_RDONE             (1 << 0)        /* Reset Done */
 119
 120 /* I2C System Configuration Register (OMAP_I2C_SYSC): */
 121 #define OMAP_I2C_SYSC_SRST              (1 << 1)        /* Soft Reset */
 122
 123 struct omap_i2c_dev {
 124         struct device           *dev;
 125         void __iomem            *base;          /* virtual */
 126         int                     irq;
 127         struct clk              *iclk;          /* Interface clock */
 128         struct clk              *fclk;          /* Functional clock */
 129         struct completion       cmd_complete;
 130         struct resource         *ioarea;
 131         u32                     speed;          /* Speed of bus in Khz */
 132         u16                     cmd_err;
 133         u8                      *buf;
 134         size_t                  buf_len;
 135         struct i2c_adapter      adapter;
 136         u8                      fifo_size;      /* use as flag and value
 137                                                  * fifo_size==0 implies no fifo
 138                                                  * if set, should be trsh+1
 139                                                  */
 140         unsigned                rev1:1;
 141         unsigned                b_hw:1;         /* bad h/w fixes */
 142         unsigned                idle:1;
 143         u16                     iestate;        /* Saved interrupt register */
 144 };
 145
 146 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 147                                       int reg, u16 val)
 148 {
 149         __raw_writew(val, i2c_dev->base + reg);
 150 }
 151
 152 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 153 {
 154         return __raw_readw(i2c_dev->base + reg);
 155 }
 156
 157 static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
 158 {
 159         if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 160                 dev->iclk = clk_get(dev->dev, "i2c_ick");
 161                 if (IS_ERR(dev->iclk)) {
 162                         dev->iclk = NULL;
 163                         return -ENODEV;
 164                 }
 165         }
 166
 167         dev->fclk = clk_get(dev->dev, "i2c_fck");
 168         if (IS_ERR(dev->fclk)) {
 169                 if (dev->iclk != NULL) {
 170                         clk_put(dev->iclk);
 171                         dev->iclk = NULL;
 172                 }
 173                 dev->fclk = NULL;
 174                 return -ENODEV;
 175         }
 176
 177         return 0;
 178 }
 179
 180 static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
 181 {
 182         clk_put(dev->fclk);
 183         dev->fclk = NULL;
 184         if (dev->iclk != NULL) {
 185                 clk_put(dev->iclk);
 186                 dev->iclk = NULL;
 187         }
 188 }
 189
 190 static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 191 {
 192         if (dev->iclk != NULL)
 193                 clk_enable(dev->iclk);
 194         clk_enable(dev->fclk);
 195         dev->idle = 0;
 196         if (dev->iestate)
 197                 omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
 198 }
 199
 200 static void omap_i2c_idle(struct omap_i2c_dev *dev)
 201 {
 202         u16 iv;
 203
 204         dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
 205         omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
 206         if (dev->rev1) {
 207                 iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);   /* Read clears */
 208         } else {
 209                 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
 210
 211                 /* Flush posted write before the dev->idle store occurs */
 212                 omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
 213         }
 214         dev->idle = 1;
 215         clk_disable(dev->fclk);
 216         if (dev->iclk != NULL)
 217                 clk_disable(dev->iclk);
 218 }
 219
 220 static int omap_i2c_init(struct omap_i2c_dev *dev)
 221 {
 222         u16 psc = 0, scll = 0, sclh = 0;
 223         u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
 224         unsigned long fclk_rate = 12000000;
 225         unsigned long timeout;
 226         unsigned long internal_clk = 0;
 227
 228         if (!dev->rev1) {
 229                 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST);
 230                 /* For some reason we need to set the EN bit before the
 231                  * reset done bit gets set. */
 232                 timeout = jiffies + OMAP_I2C_TIMEOUT;
 233                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 234                 while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) &
 235                          OMAP_I2C_SYSS_RDONE)) {
 236                         if (time_after(jiffies, timeout)) {
 237                                 dev_warn(dev->dev, "timeout waiting "
 238                                                 "for controller reset\n");
 239                                 return -ETIMEDOUT;
 240                         }
 241                         msleep(1);
 242                 }
 243         }
 244         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 245
 246         if (cpu_class_is_omap1()) {
 247                 struct clk *armxor_ck;
 248
 249                 armxor_ck = clk_get(NULL, "armxor_ck");
 250                 if (IS_ERR(armxor_ck))
 251                         dev_warn(dev->dev, "Could not get armxor_ck\n");
 252                 else {
 253                         fclk_rate = clk_get_rate(armxor_ck);
 254                         clk_put(armxor_ck);
 255                 }
 256                 /* TRM for 5912 says the I2C clock must be prescaled to be
 257                  * between 7 - 12 MHz. The XOR input clock is typically
 258                  * 12, 13 or 19.2 MHz. So we should have code that produces:
 259                  *
 260                  * XOR MHz      Divider         Prescaler
 261                  * 12           1               0
 262                  * 13           2               1
 263                  * 19.2         2               1
 264                  */
 265                 if (fclk_rate > 12000000)
 266                         psc = fclk_rate / 12000000;
 267         }
 268
 269         if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 270
 271                 /* HSI2C controller internal clk rate should be 19.2 Mhz */
 272                 internal_clk = 19200;
 273                 fclk_rate = clk_get_rate(dev->fclk) / 1000;
 274
 275                 /* Compute prescaler divisor */
 276                 psc = fclk_rate / internal_clk;
 277                 psc = psc - 1;
 278
 279                 /* If configured for High Speed */
 280                 if (dev->speed > 400) {
 281                         /* For first phase of HS mode */
 282                         fsscll = internal_clk / (400 * 2) - 6;
 283                         fssclh = internal_clk / (400 * 2) - 6;
 284
 285                         /* For second phase of HS mode */
 286                         hsscll = fclk_rate / (dev->speed * 2) - 6;
 287                         hssclh = fclk_rate / (dev->speed * 2) - 6;
 288                 } else {
 289                         /* To handle F/S modes */
 290                         fsscll = internal_clk / (dev->speed * 2) - 6;
 291                         fssclh = internal_clk / (dev->speed * 2) - 6;
 292                 }
 293                 scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
 294                 sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
 295         } else {
 296                 /* Program desired operating rate */
 297                 fclk_rate /= (psc + 1) * 1000;
 298                 if (psc > 2)
 299                         psc = 2;
 300                 scll = fclk_rate / (dev->speed * 2) - 7 + psc;
 301                 sclh = fclk_rate / (dev->speed * 2) - 7 + psc;
 302         }
 303
 304         /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
 305         omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc);
 306
 307         /* SCL low and high time values */
 308         omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll);
 309         omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh);
 310
 311         if (dev->fifo_size)
 312                 /* Note: setup required fifo size - 1 */
 313                 omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG,
 314                                         (dev->fifo_size - 1) << 8 | /* RTRSH */
 315                                         OMAP_I2C_BUF_RXFIF_CLR |
 316                                         (dev->fifo_size - 1) | /* XTRSH */
 317                                         OMAP_I2C_BUF_TXFIF_CLR);
 318
 319         /* Take the I2C module out of reset: */
 320         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 321
 322         /* Enable interrupts */
 323         omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
 324                            (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
 325                             OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
 326                             OMAP_I2C_IE_AL)  | ((dev->fifo_size) ?
 327                                 (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0));
 328         return 0;
 329 }
 330
 331 /*
 332  * Waiting on Bus Busy
 333  */
 334 static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev)
 335 {
 336         unsigned long timeout;
 337
 338         timeout = jiffies + OMAP_I2C_TIMEOUT;
 339         while (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
 340                 if (time_after(jiffies, timeout)) {
 341                         dev_warn(dev->dev, "timeout waiting for bus ready\n");
 342                         return -ETIMEDOUT;
 343                 }
 344                 msleep(1);
 345         }
 346
 347         return 0;
 348 }
 349
 350 /*
 351  * Low level master read/write transaction.
 352  */
 353 static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 354                              struct i2c_msg *msg, int stop)
 355 {
 356         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
 357         int r;
 358         u16 w;
 359
 360         dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
 361                 msg->addr, msg->len, msg->flags, stop);
 362
 363         if (msg->len == 0)
 364                 return -EINVAL;
 365
 366         omap_i2c_write_reg(dev, OMAP_I2C_SA_REG, msg->addr);
 367
 368         /* REVISIT: Could the STB bit of I2C_CON be used with probing? */
 369         dev->buf = msg->buf;
 370         dev->buf_len = msg->len;
 371
 372         omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
 373
 374         /* Clear the FIFO Buffers */
 375         w = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG);
 376         w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
 377         omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w);
 378
 379         init_completion(&dev->cmd_complete);
 380         dev->cmd_err = 0;
 381
 382         w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
 383
 384         /* High speed configuration */
 385         if (dev->speed > 400)
 386                 w |= OMAP_I2C_CON_OPMODE_HS;
 387
 388         if (msg->flags & I2C_M_TEN)
 389                 w |= OMAP_I2C_CON_XA;
 390         if (!(msg->flags & I2C_M_RD))
 391                 w |= OMAP_I2C_CON_TRX;
 392         if (!dev->b_hw && stop)
 393                 w |= OMAP_I2C_CON_STP;
 394         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 395
 396         /*
 397          * Don't write stt and stp together on some hardware.
 398          */
 399         if (dev->b_hw && stop) {
 400                 unsigned long delay = jiffies + OMAP_I2C_TIMEOUT;
 401                 u16 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
 402                 while (con & OMAP_I2C_CON_STT) {
 403                         con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
 404
 405                         /* Let the user know if i2c is in a bad state */
 406                         if (time_after(jiffies, delay)) {
 407                                 dev_err(dev->dev, "controller timed out "
 408                                 "waiting for start condition to finish\n");
 409                                 return -ETIMEDOUT;
 410                         }
 411                         cpu_relax();
 412                 }
 413
 414                 w |= OMAP_I2C_CON_STP;
 415                 w &= ~OMAP_I2C_CON_STT;
 416                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 417         }
 418
 419         /*
 420          * REVISIT: We should abort the transfer on signals, but the bus goes
 421          * into arbitration and we're currently unable to recover from it.
 422          */
 423         r = wait_for_completion_timeout(&dev->cmd_complete,
 424                                         OMAP_I2C_TIMEOUT);
 425         dev->buf_len = 0;
 426         if (r < 0)
 427                 return r;
 428         if (r == 0) {
 429                 dev_err(dev->dev, "controller timed out\n");
 430                 omap_i2c_init(dev);
 431                 return -ETIMEDOUT;
 432         }
 433
 434         if (likely(!dev->cmd_err))
 435                 return 0;
 436
 437         /* We have an error */
 438         if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
 439                             OMAP_I2C_STAT_XUDF)) {
 440                 omap_i2c_init(dev);
 441                 return -EIO;
 442         }
 443
 444         if (dev->cmd_err & OMAP_I2C_STAT_NACK) {
 445                 if (msg->flags & I2C_M_IGNORE_NAK)
 446                         return 0;
 447                 if (stop) {
 448                         w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
 449                         w |= OMAP_I2C_CON_STP;
 450                         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 451                 }
 452                 return -EREMOTEIO;
 453         }
 454         return -EIO;
 455 }
 456
 457
 458 /*
 459  * Prepare controller for a transaction and call omap_i2c_xfer_msg
 460  * to do the work during IRQ processing.
 461  */
 462 static int
 463 omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 464 {
 465         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
 466         int i;
 467         int r;
 468
 469         omap_i2c_unidle(dev);
 470
 471         if ((r = omap_i2c_wait_for_bb(dev)) < 0)
 472                 goto out;
 473
 474         for (i = 0; i < num; i++) {
 475                 r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
 476                 if (r != 0)
 477                         break;
 478         }
 479
 480         if (r == 0)
 481                 r = num;
 482 out:
 483         omap_i2c_idle(dev);
 484         return r;
 485 }
 486
 487 static u32
 488 omap_i2c_func(struct i2c_adapter *adap)
 489 {
 490         return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
 491 }
 492
 493 static inline void
 494 omap_i2c_complete_cmd(struct omap_i2c_dev *dev, u16 err)
 495 {
 496         dev->cmd_err |= err;
 497         complete(&dev->cmd_complete);
 498 }
 499
 500 static inline void
 501 omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
 502 {
 503         omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 504 }
 505
 506 static irqreturn_t
 507 omap_i2c_rev1_isr(int this_irq, void *dev_id)
 508 {
 509         struct omap_i2c_dev *dev = dev_id;
 510         u16 iv, w;
 511
 512         if (dev->idle)
 513                 return IRQ_NONE;
 514
 515         iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
 516         switch (iv) {
 517         case 0x00:      /* None */
 518                 break;
 519         case 0x01:      /* Arbitration lost */
 520                 dev_err(dev->dev, "Arbitration lost\n");
 521                 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
 522                 break;
 523         case 0x02:      /* No acknowledgement */
 524                 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
 525                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP);
 526                 break;
 527         case 0x03:      /* Register access ready */
 528                 omap_i2c_complete_cmd(dev, 0);
 529                 break;
 530         case 0x04:      /* Receive data ready */
 531                 if (dev->buf_len) {
 532                         w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
 533                         *dev->buf++ = w;
 534                         dev->buf_len--;
 535                         if (dev->buf_len) {
 536                                 *dev->buf++ = w >> 8;
 537                                 dev->buf_len--;
 538                         }
 539                 } else
 540                         dev_err(dev->dev, "RRDY IRQ while no data requested\n");
 541                 break;
 542         case 0x05:      /* Transmit data ready */
 543                 if (dev->buf_len) {
 544                         w = *dev->buf++;
 545                         dev->buf_len--;
 546                         if (dev->buf_len) {
 547                                 w |= *dev->buf++ << 8;
 548                                 dev->buf_len--;
 549                         }
 550                         omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 551                 } else
 552                         dev_err(dev->dev, "XRDY IRQ while no data to send\n");
 553                 break;
 554         default:
 555                 return IRQ_NONE;
 556         }
 557
 558         return IRQ_HANDLED;
 559 }
 560
 561 static irqreturn_t
 562 omap_i2c_isr(int this_irq, void *dev_id)
 563 {
 564         struct omap_i2c_dev *dev = dev_id;
 565         u16 bits;
 566         u16 stat, w;
 567         int err, count = 0;
 568
 569         if (dev->idle)
 570                 return IRQ_NONE;
 571
 572         bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
 573         while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
 574                 dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
 575                 if (count++ == 100) {
 576                         dev_warn(dev->dev, "Too much work in one IRQ\n");
 577                         break;
 578                 }
 579
 580                 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 581
 582                 err = 0;
 583                 if (stat & OMAP_I2C_STAT_NACK) {
 584                         err |= OMAP_I2C_STAT_NACK;
 585                         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
 586                                            OMAP_I2C_CON_STP);
 587                 }
 588                 if (stat & OMAP_I2C_STAT_AL) {
 589                         dev_err(dev->dev, "Arbitration lost\n");
 590                         err |= OMAP_I2C_STAT_AL;
 591                 }
 592                 if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
 593                                         OMAP_I2C_STAT_AL))
 594                         omap_i2c_complete_cmd(dev, err);
 595                 if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
 596                         u8 num_bytes = 1;
 597                         if (dev->fifo_size) {
 598                                 if (stat & OMAP_I2C_STAT_RRDY)
 599                                         num_bytes = dev->fifo_size;
 600                                 else
 601                                         num_bytes = omap_i2c_read_reg(dev,
 602                                                         OMAP_I2C_BUFSTAT_REG);
 603                         }
 604                         while (num_bytes) {
 605                                 num_bytes--;
 606                                 w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
 607                                 if (dev->buf_len) {
 608                                         *dev->buf++ = w;
 609                                         dev->buf_len--;
 610                                         /* Data reg from 2430 is 8 bit wide */
 611                                         if (!cpu_is_omap2430() &&
 612                                                         !cpu_is_omap34xx()) {
 613                                                 if (dev->buf_len) {
 614                                                         *dev->buf++ = w >> 8;
 615                                                         dev->buf_len--;
 616                                                 }
 617                                         }
 618                                 } else {
 619                                         if (stat & OMAP_I2C_STAT_RRDY)
 620                                                 dev_err(dev->dev,
 621                                                         "RRDY IRQ while no data"
 622                                                                 " requested\n");
 623                                         if (stat & OMAP_I2C_STAT_RDR)
 624                                                 dev_err(dev->dev,
 625                                                         "RDR IRQ while no data"
 626                                                                 " requested\n");
 627                                         break;
 628                                 }
 629                         }
 630                         omap_i2c_ack_stat(dev,
 631                                 stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR));
 632                         continue;
 633                 }
 634                 if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) {
 635                         u8 num_bytes = 1;
 636                         if (dev->fifo_size) {
 637                                 if (stat & OMAP_I2C_STAT_XRDY)
 638                                         num_bytes = dev->fifo_size;
 639                                 else
 640                                         num_bytes = omap_i2c_read_reg(dev,
 641                                                         OMAP_I2C_BUFSTAT_REG);
 642                         }
 643                         while (num_bytes) {
 644                                 num_bytes--;
 645                                 w = 0;
 646                                 if (dev->buf_len) {
 647                                         w = *dev->buf++;
 648                                         dev->buf_len--;
 649                                         /* Data reg from  2430 is 8 bit wide */
 650                                         if (!cpu_is_omap2430() &&
 651                                                         !cpu_is_omap34xx()) {
 652                                                 if (dev->buf_len) {
 653                                                         w |= *dev->buf++ << 8;
 654                                                         dev->buf_len--;
 655                                                 }
 656                                         }
 657                                 } else {
 658                                         if (stat & OMAP_I2C_STAT_XRDY)
 659                                                 dev_err(dev->dev,
 660                                                         "XRDY IRQ while no "
 661                                                         "data to send\n");
 662                                         if (stat & OMAP_I2C_STAT_XDR)
 663                                                 dev_err(dev->dev,
 664                                                         "XDR IRQ while no "
 665                                                         "data to send\n");
 666                                         break;
 667                                 }
 668                                 omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 669                         }
 670                         omap_i2c_ack_stat(dev,
 671                                 stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
 672                         continue;
 673                 }
 674                 if (stat & OMAP_I2C_STAT_ROVR) {
 675                         dev_err(dev->dev, "Receive overrun\n");
 676                         dev->cmd_err |= OMAP_I2C_STAT_ROVR;
 677                 }
 678                 if (stat & OMAP_I2C_STAT_XUDF) {
 679                         dev_err(dev->dev, "Transmit underflow\n");
 680                         dev->cmd_err |= OMAP_I2C_STAT_XUDF;
 681                 }
 682         }
 683
 684         return count ? IRQ_HANDLED : IRQ_NONE;
 685 }
 686
 687 static const struct i2c_algorithm omap_i2c_algo = {
 688         .master_xfer    = omap_i2c_xfer,
 689         .functionality  = omap_i2c_func,
 690 };
 691
 692 static int __init
 693 omap_i2c_probe(struct platform_device *pdev)
 694 {
 695         struct omap_i2c_dev     *dev;
 696         struct i2c_adapter      *adap;
 697         struct resource         *mem, *irq, *ioarea;
 698         int r;
 699         u32 speed = 0;
 700
 701         /* NOTE: driver uses the static register mapping */
 702         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 703         if (!mem) {
 704                 dev_err(&pdev->dev, "no mem resource?\n");
 705                 return -ENODEV;
 706         }
 707         irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 708         if (!irq) {
 709                 dev_err(&pdev->dev, "no irq resource?\n");
 710                 return -ENODEV;
 711         }
 712
 713         ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
 714                         pdev->name);
 715         if (!ioarea) {
 716                 dev_err(&pdev->dev, "I2C region already claimed\n");
 717                 return -EBUSY;
 718         }
 719
 720         dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL);
 721         if (!dev) {
 722                 r = -ENOMEM;
 723                 goto err_release_region;
 724         }
 725
 726         if (pdev->dev.platform_data != NULL)
 727                 speed = *(u32 *)pdev->dev.platform_data;
 728         else
 729                 speed = 100;    /* Defualt speed */
 730
 731         dev->speed = speed;
 732         dev->dev = &pdev->dev;
 733         dev->irq = irq->start;
 734         dev->base = ioremap(mem->start, mem->end - mem->start + 1);
 735         if (!dev->base) {
 736                 r = -ENOMEM;
 737                 goto err_free_mem;
 738         }
 739
 740         platform_set_drvdata(pdev, dev);
 741
 742         if ((r = omap_i2c_get_clocks(dev)) != 0)
 743                 goto err_iounmap;
 744
 745         omap_i2c_unidle(dev);
 746
 747         if (cpu_is_omap15xx())
 748                 dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
 749
 750         if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 751                 u16 s;
 752
 753                 /* Set up the fifo size - Get total size */
 754                 s = (omap_i2c_read_reg(dev, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3;
 755                 dev->fifo_size = 0x8 << s;
 756
 757                 /*
 758                  * Set up notification threshold as half the total available
 759                  * size. This is to ensure that we can handle the status on int
 760                  * call back latencies.
 761                  */
 762                 dev->fifo_size = (dev->fifo_size / 2);
 763                 dev->b_hw = 1; /* Enable hardware fixes */
 764         }
 765
 766         /* reset ASAP, clearing any IRQs */
 767         omap_i2c_init(dev);
 768
 769         r = request_irq(dev->irq, dev->rev1 ? omap_i2c_rev1_isr : omap_i2c_isr,
 770                         0, pdev->name, dev);
 771
 772         if (r) {
 773                 dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
 774                 goto err_unuse_clocks;
 775         }
 776         r = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 777         dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
 778                  pdev->id, r >> 4, r & 0xf, dev->speed);
 779
 780         adap = &dev->adapter;
 781         i2c_set_adapdata(adap, dev);
 782         adap->owner = THIS_MODULE;
 783         adap->class = I2C_CLASS_HWMON;
 784         strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
 785         adap->algo = &omap_i2c_algo;
 786         adap->dev.parent = &pdev->dev;
 787
 788         /* i2c device drivers may be active on return from add_adapter() */
 789         adap->nr = pdev->id;
 790         r = i2c_add_numbered_adapter(adap);
 791         if (r) {
 792                 dev_err(dev->dev, "failure adding adapter\n");
 793                 goto err_free_irq;
 794         }
 795
 796         omap_i2c_idle(dev);
 797
 798         return 0;
 799
 800 err_free_irq:
 801         free_irq(dev->irq, dev);
 802 err_unuse_clocks:
 803         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 804         omap_i2c_idle(dev);
 805         omap_i2c_put_clocks(dev);
 806 err_iounmap:
 807         iounmap(dev->base);
 808 err_free_mem:
 809         platform_set_drvdata(pdev, NULL);
 810         kfree(dev);
 811 err_release_region:
 812         release_mem_region(mem->start, (mem->end - mem->start) + 1);
 813
 814         return r;
 815 }
 816
 817 static int
 818 omap_i2c_remove(struct platform_device *pdev)
 819 {
 820         struct omap_i2c_dev     *dev = platform_get_drvdata(pdev);
 821         struct resource         *mem;
 822
 823         platform_set_drvdata(pdev, NULL);
 824
 825         free_irq(dev->irq, dev);
 826         i2c_del_adapter(&dev->adapter);
 827         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 828         omap_i2c_put_clocks(dev);
 829         iounmap(dev->base);
 830         kfree(dev);
 831         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 832         release_mem_region(mem->start, (mem->end - mem->start) + 1);
 833         return 0;
 834 }
 835
 836 static struct platform_driver omap_i2c_driver = {
 837         .probe          = omap_i2c_probe,
 838         .remove         = omap_i2c_remove,
 839         .driver         = {
 840                 .name   = "i2c_omap",
 841                 .owner  = THIS_MODULE,
 842         },
 843 };
 844
 845 /* I2C may be needed to bring up other drivers */
 846 static int __init
 847 omap_i2c_init_driver(void)
 848 {
 849         return platform_driver_register(&omap_i2c_driver);
 850 }
 851 subsys_initcall(omap_i2c_init_driver);
 852
 853 static void __exit omap_i2c_exit_driver(void)
 854 {
 855         platform_driver_unregister(&omap_i2c_driver);
 856 }
 857 module_exit(omap_i2c_exit_driver);
 858
 859 MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
 860 MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
 861 MODULE_LICENSE("GPL");
 862 MODULE_ALIAS("platform:i2c_omap");