drivers/i2c/busses/i2c-omap.c

   1 /*
   2  * TI OMAP I2C master mode driver
   3  *
   4  * Copyright (C) 2003 MontaVista Software, Inc.
   5  * Copyright (C) 2004 Texas Instruments.
   6  *
   7  * Updated to work with multiple I2C interfaces on 24xx by
   8  * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
   9  * Copyright (C) 2005 Nokia Corporation
  10  *
  11  * Cleaned up by Juha Yrjölä <juha.yrjola@nokia.com>
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License as published by
  15  * the Free Software Foundation; either version 2 of the License, or
  16  * (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  */
  27
  28 #include <linux/module.h>
  29 #include <linux/delay.h>
  30 #include <linux/i2c.h>
  31 #include <linux/err.h>
  32 #include <linux/interrupt.h>
  33 #include <linux/completion.h>
  34 #include <linux/platform_device.h>
  35 #include <linux/clk.h>
  36
  37 #include <asm/io.h>
  38
  39 /* timeout waiting for the controller to respond */
  40 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
  41
  42 #define OMAP_I2C_REV_REG                0x00
  43 #define OMAP_I2C_IE_REG                 0x04
  44 #define OMAP_I2C_STAT_REG               0x08
  45 #define OMAP_I2C_IV_REG                 0x0c
  46 #define OMAP_I2C_SYSS_REG               0x10
  47 #define OMAP_I2C_BUF_REG                0x14
  48 #define OMAP_I2C_CNT_REG                0x18
  49 #define OMAP_I2C_DATA_REG               0x1c
  50 #define OMAP_I2C_SYSC_REG               0x20
  51 #define OMAP_I2C_CON_REG                0x24
  52 #define OMAP_I2C_OA_REG                 0x28
  53 #define OMAP_I2C_SA_REG                 0x2c
  54 #define OMAP_I2C_PSC_REG                0x30
  55 #define OMAP_I2C_SCLL_REG               0x34
  56 #define OMAP_I2C_SCLH_REG               0x38
  57 #define OMAP_I2C_SYSTEST_REG            0x3c
  58
  59 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
  60 #define OMAP_I2C_IE_XRDY        (1 << 4)        /* TX data ready int enable */
  61 #define OMAP_I2C_IE_RRDY        (1 << 3)        /* RX data ready int enable */
  62 #define OMAP_I2C_IE_ARDY        (1 << 2)        /* Access ready int enable */
  63 #define OMAP_I2C_IE_NACK        (1 << 1)        /* No ack interrupt enable */
  64 #define OMAP_I2C_IE_AL          (1 << 0)        /* Arbitration lost int ena */
  65
  66 /* I2C Status Register (OMAP_I2C_STAT): */
  67 #define OMAP_I2C_STAT_SBD       (1 << 15)       /* Single byte data */
  68 #define OMAP_I2C_STAT_BB        (1 << 12)       /* Bus busy */
  69 #define OMAP_I2C_STAT_ROVR      (1 << 11)       /* Receive overrun */
  70 #define OMAP_I2C_STAT_XUDF      (1 << 10)       /* Transmit underflow */
  71 #define OMAP_I2C_STAT_AAS       (1 << 9)        /* Address as slave */
  72 #define OMAP_I2C_STAT_AD0       (1 << 8)        /* Address zero */
  73 #define OMAP_I2C_STAT_XRDY      (1 << 4)        /* Transmit data ready */
  74 #define OMAP_I2C_STAT_RRDY      (1 << 3)        /* Receive data ready */
  75 #define OMAP_I2C_STAT_ARDY      (1 << 2)        /* Register access ready */
  76 #define OMAP_I2C_STAT_NACK      (1 << 1)        /* No ack interrupt enable */
  77 #define OMAP_I2C_STAT_AL        (1 << 0)        /* Arbitration lost int ena */
  78
  79 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
  80 #define OMAP_I2C_BUF_RDMA_EN    (1 << 15)       /* RX DMA channel enable */
  81 #define OMAP_I2C_BUF_XDMA_EN    (1 << 7)        /* TX DMA channel enable */
  82
  83 /* I2C Configuration Register (OMAP_I2C_CON): */
  84 #define OMAP_I2C_CON_EN         (1 << 15)       /* I2C module enable */
  85 #define OMAP_I2C_CON_BE         (1 << 14)       /* Big endian mode */
  86 #define OMAP_I2C_CON_STB        (1 << 11)       /* Start byte mode (master) */
  87 #define OMAP_I2C_CON_MST        (1 << 10)       /* Master/slave mode */
  88 #define OMAP_I2C_CON_TRX        (1 << 9)        /* TX/RX mode (master only) */
  89 #define OMAP_I2C_CON_XA         (1 << 8)        /* Expand address */
  90 #define OMAP_I2C_CON_RM         (1 << 2)        /* Repeat mode (master only) */
  91 #define OMAP_I2C_CON_STP        (1 << 1)        /* Stop cond (master only) */
  92 #define OMAP_I2C_CON_STT        (1 << 0)        /* Start condition (master) */
  93
  94 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
  95 #ifdef DEBUG
  96 #define OMAP_I2C_SYSTEST_ST_EN          (1 << 15)       /* System test enable */
  97 #define OMAP_I2C_SYSTEST_FREE           (1 << 14)       /* Free running mode */
  98 #define OMAP_I2C_SYSTEST_TMODE_MASK     (3 << 12)       /* Test mode select */
  99 #define OMAP_I2C_SYSTEST_TMODE_SHIFT    (12)            /* Test mode select */
 100 #define OMAP_I2C_SYSTEST_SCL_I          (1 << 3)        /* SCL line sense in */
 101 #define OMAP_I2C_SYSTEST_SCL_O          (1 << 2)        /* SCL line drive out */
 102 #define OMAP_I2C_SYSTEST_SDA_I          (1 << 1)        /* SDA line sense in */
 103 #define OMAP_I2C_SYSTEST_SDA_O          (1 << 0)        /* SDA line drive out */
 104 #endif
 105
 106 /* I2C System Status register (OMAP_I2C_SYSS): */
 107 #define OMAP_I2C_SYSS_RDONE             (1 << 0)        /* Reset Done */
 108
 109 /* I2C System Configuration Register (OMAP_I2C_SYSC): */
 110 #define OMAP_I2C_SYSC_SRST              (1 << 1)        /* Soft Reset */
 111
 112 /* REVISIT: Use platform_data instead of module parameters */
 113 /* Fast Mode = 400 kHz, Standard = 100 kHz */
 114 static int clock = 100; /* Default: 100 kHz */
 115 module_param(clock, int, 0);
 116 MODULE_PARM_DESC(clock, "Set I2C clock in kHz: 400=fast mode (default == 100)");
 117
 118 struct omap_i2c_dev {
 119         struct device           *dev;
 120         void __iomem            *base;          /* virtual */
 121         int                     irq;
 122         struct clk              *iclk;          /* Interface clock */
 123         struct clk              *fclk;          /* Functional clock */
 124         struct completion       cmd_complete;
 125         struct resource         *ioarea;
 126         u16                     cmd_err;
 127         u8                      *buf;
 128         size_t                  buf_len;
 129         struct i2c_adapter      adapter;
 130         unsigned                rev1:1;
 131         unsigned                idle:1;
 132         u16                     iestate;        /* Saved interrupt register */
 133 };
 134
 135 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 136                                       int reg, u16 val)
 137 {
 138         __raw_writew(val, i2c_dev->base + reg);
 139 }
 140
 141 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 142 {
 143         return __raw_readw(i2c_dev->base + reg);
 144 }
 145
 146 static int omap_i2c_get_clocks(struct omap_i2c_dev *dev)
 147 {
 148         if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
 149                 dev->iclk = clk_get(dev->dev, "i2c_ick");
 150                 if (IS_ERR(dev->iclk)) {
 151                         dev->iclk = NULL;
 152                         return -ENODEV;
 153                 }
 154         }
 155
 156         dev->fclk = clk_get(dev->dev, "i2c_fck");
 157         if (IS_ERR(dev->fclk)) {
 158                 if (dev->iclk != NULL) {
 159                         clk_put(dev->iclk);
 160                         dev->iclk = NULL;
 161                 }
 162                 dev->fclk = NULL;
 163                 return -ENODEV;
 164         }
 165
 166         return 0;
 167 }
 168
 169 static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
 170 {
 171         clk_put(dev->fclk);
 172         dev->fclk = NULL;
 173         if (dev->iclk != NULL) {
 174                 clk_put(dev->iclk);
 175                 dev->iclk = NULL;
 176         }
 177 }
 178
 179 static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 180 {
 181         if (dev->iclk != NULL)
 182                 clk_enable(dev->iclk);
 183         clk_enable(dev->fclk);
 184         dev->idle = 0;
 185         if (dev->iestate)
 186                 omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
 187 }
 188
 189 static void omap_i2c_idle(struct omap_i2c_dev *dev)
 190 {
 191         u16 iv;
 192
 193         dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
 194         omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
 195         if (dev->rev1) {
 196                 iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);   /* Read clears */
 197         } else {
 198                 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
 199
 200                 /* Flush posted write before the dev->idle store occurs */
 201                 omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
 202         }
 203         dev->idle = 1;
 204         clk_disable(dev->fclk);
 205         if (dev->iclk != NULL)
 206                 clk_disable(dev->iclk);
 207 }
 208
 209 static int omap_i2c_init(struct omap_i2c_dev *dev)
 210 {
 211         u16 psc = 0;
 212         unsigned long fclk_rate = 12000000;
 213         unsigned long timeout;
 214
 215         if (!dev->rev1) {
 216                 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST);
 217                 /* For some reason we need to set the EN bit before the
 218                  * reset done bit gets set. */
 219                 timeout = jiffies + OMAP_I2C_TIMEOUT;
 220                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 221                 while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) &
 222                          OMAP_I2C_SYSS_RDONE)) {
 223                         if (time_after(jiffies, timeout)) {
 224                                 dev_warn(dev->dev, "timeout waiting "
 225                                                 "for controller reset\n");
 226                                 return -ETIMEDOUT;
 227                         }
 228                         msleep(1);
 229                 }
 230         }
 231         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 232
 233         if (cpu_class_is_omap1()) {
 234                 struct clk *armxor_ck;
 235
 236                 armxor_ck = clk_get(NULL, "armxor_ck");
 237                 if (IS_ERR(armxor_ck))
 238                         dev_warn(dev->dev, "Could not get armxor_ck\n");
 239                 else {
 240                         fclk_rate = clk_get_rate(armxor_ck);
 241                         clk_put(armxor_ck);
 242                 }
 243                 /* TRM for 5912 says the I2C clock must be prescaled to be
 244                  * between 7 - 12 MHz. The XOR input clock is typically
 245                  * 12, 13 or 19.2 MHz. So we should have code that produces:
 246                  *
 247                  * XOR MHz      Divider         Prescaler
 248                  * 12           1               0
 249                  * 13           2               1
 250                  * 19.2         2               1
 251                  */
 252                 if (fclk_rate > 12000000)
 253                         psc = fclk_rate / 12000000;
 254         }
 255
 256         /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
 257         omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc);
 258
 259         /* Program desired operating rate */
 260         fclk_rate /= (psc + 1) * 1000;
 261         if (psc > 2)
 262                 psc = 2;
 263
 264         omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG,
 265                            fclk_rate / (clock * 2) - 7 + psc);
 266         omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG,
 267                            fclk_rate / (clock * 2) - 7 + psc);
 268
 269         /* Take the I2C module out of reset: */
 270         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 271
 272         /* Enable interrupts */
 273         omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
 274                            (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
 275                             OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
 276                             OMAP_I2C_IE_AL));
 277         return 0;
 278 }
 279
 280 /*
 281  * Waiting on Bus Busy
 282  */
 283 static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev)
 284 {
 285         unsigned long timeout;
 286
 287         timeout = jiffies + OMAP_I2C_TIMEOUT;
 288         while (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
 289                 if (time_after(jiffies, timeout)) {
 290                         dev_warn(dev->dev, "timeout waiting for bus ready\n");
 291                         return -ETIMEDOUT;
 292                 }
 293                 msleep(1);
 294         }
 295
 296         return 0;
 297 }
 298
 299 /*
 300  * Low level master read/write transaction.
 301  */
 302 static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 303                              struct i2c_msg *msg, int stop)
 304 {
 305         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
 306         int r;
 307         u16 w;
 308
 309         dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
 310                 msg->addr, msg->len, msg->flags, stop);
 311
 312         if (msg->len == 0)
 313                 return -EINVAL;
 314
 315         omap_i2c_write_reg(dev, OMAP_I2C_SA_REG, msg->addr);
 316
 317         /* REVISIT: Could the STB bit of I2C_CON be used with probing? */
 318         dev->buf = msg->buf;
 319         dev->buf_len = msg->len;
 320
 321         omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
 322
 323         init_completion(&dev->cmd_complete);
 324         dev->cmd_err = 0;
 325
 326         w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
 327         if (msg->flags & I2C_M_TEN)
 328                 w |= OMAP_I2C_CON_XA;
 329         if (!(msg->flags & I2C_M_RD))
 330                 w |= OMAP_I2C_CON_TRX;
 331         if (stop)
 332                 w |= OMAP_I2C_CON_STP;
 333         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 334
 335         /*
 336          * REVISIT: We should abort the transfer on signals, but the bus goes
 337          * into arbitration and we're currently unable to recover from it.
 338          */
 339         r = wait_for_completion_timeout(&dev->cmd_complete,
 340                                         OMAP_I2C_TIMEOUT);
 341         dev->buf_len = 0;
 342         if (r < 0)
 343                 return r;
 344         if (r == 0) {
 345                 dev_err(dev->dev, "controller timed out\n");
 346                 omap_i2c_init(dev);
 347                 return -ETIMEDOUT;
 348         }
 349
 350         if (likely(!dev->cmd_err))
 351                 return 0;
 352
 353         /* We have an error */
 354         if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
 355                             OMAP_I2C_STAT_XUDF)) {
 356                 omap_i2c_init(dev);
 357                 return -EIO;
 358         }
 359
 360         if (dev->cmd_err & OMAP_I2C_STAT_NACK) {
 361                 if (msg->flags & I2C_M_IGNORE_NAK)
 362                         return 0;
 363                 if (stop) {
 364                         w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
 365                         w |= OMAP_I2C_CON_STP;
 366                         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 367                 }
 368                 return -EREMOTEIO;
 369         }
 370         return -EIO;
 371 }
 372
 373
 374 /*
 375  * Prepare controller for a transaction and call omap_i2c_xfer_msg
 376  * to do the work during IRQ processing.
 377  */
 378 static int
 379 omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 380 {
 381         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
 382         int i;
 383         int r;
 384
 385         omap_i2c_unidle(dev);
 386
 387         if ((r = omap_i2c_wait_for_bb(dev)) < 0)
 388                 goto out;
 389
 390         for (i = 0; i < num; i++) {
 391                 r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
 392                 if (r != 0)
 393                         break;
 394         }
 395
 396         if (r == 0)
 397                 r = num;
 398 out:
 399         omap_i2c_idle(dev);
 400         return r;
 401 }
 402
 403 static u32
 404 omap_i2c_func(struct i2c_adapter *adap)
 405 {
 406         return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
 407 }
 408
 409 static inline void
 410 omap_i2c_complete_cmd(struct omap_i2c_dev *dev, u16 err)
 411 {
 412         dev->cmd_err |= err;
 413         complete(&dev->cmd_complete);
 414 }
 415
 416 static inline void
 417 omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
 418 {
 419         omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 420 }
 421
 422 static irqreturn_t
 423 omap_i2c_rev1_isr(int this_irq, void *dev_id)
 424 {
 425         struct omap_i2c_dev *dev = dev_id;
 426         u16 iv, w;
 427
 428         if (dev->idle)
 429                 return IRQ_NONE;
 430
 431         iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
 432         switch (iv) {
 433         case 0x00:      /* None */
 434                 break;
 435         case 0x01:      /* Arbitration lost */
 436                 dev_err(dev->dev, "Arbitration lost\n");
 437                 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
 438                 break;
 439         case 0x02:      /* No acknowledgement */
 440                 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
 441                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP);
 442                 break;
 443         case 0x03:      /* Register access ready */
 444                 omap_i2c_complete_cmd(dev, 0);
 445                 break;
 446         case 0x04:      /* Receive data ready */
 447                 if (dev->buf_len) {
 448                         w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
 449                         *dev->buf++ = w;
 450                         dev->buf_len--;
 451                         if (dev->buf_len) {
 452                                 *dev->buf++ = w >> 8;
 453                                 dev->buf_len--;
 454                         }
 455                 } else
 456                         dev_err(dev->dev, "RRDY IRQ while no data requested\n");
 457                 break;
 458         case 0x05:      /* Transmit data ready */
 459                 if (dev->buf_len) {
 460                         w = *dev->buf++;
 461                         dev->buf_len--;
 462                         if (dev->buf_len) {
 463                                 w |= *dev->buf++ << 8;
 464                                 dev->buf_len--;
 465                         }
 466                         omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 467                 } else
 468                         dev_err(dev->dev, "XRDY IRQ while no data to send\n");
 469                 break;
 470         default:
 471                 return IRQ_NONE;
 472         }
 473
 474         return IRQ_HANDLED;
 475 }
 476
 477 static irqreturn_t
 478 omap_i2c_isr(int this_irq, void *dev_id)
 479 {
 480         struct omap_i2c_dev *dev = dev_id;
 481         u16 bits;
 482         u16 stat, w;
 483         int count = 0;
 484
 485         if (dev->idle)
 486                 return IRQ_NONE;
 487
 488         bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
 489         while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
 490                 dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
 491                 if (count++ == 100) {
 492                         dev_warn(dev->dev, "Too much work in one IRQ\n");
 493                         break;
 494                 }
 495
 496                 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 497
 498                 if (stat & OMAP_I2C_STAT_ARDY) {
 499                         omap_i2c_complete_cmd(dev, 0);
 500                         continue;
 501                 }
 502                 if (stat & OMAP_I2C_STAT_RRDY) {
 503                         w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
 504                         if (dev->buf_len) {
 505                                 *dev->buf++ = w;
 506                                 dev->buf_len--;
 507                                 if (dev->buf_len) {
 508                                         *dev->buf++ = w >> 8;
 509                                         dev->buf_len--;
 510                                 }
 511                         } else
 512                                 dev_err(dev->dev, "RRDY IRQ while no data "
 513                                                 "requested\n");
 514                         omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY);
 515                         continue;
 516                 }
 517                 if (stat & OMAP_I2C_STAT_XRDY) {
 518                         w = 0;
 519                         if (dev->buf_len) {
 520                                 w = *dev->buf++;
 521                                 dev->buf_len--;
 522                                 if (dev->buf_len) {
 523                                         w |= *dev->buf++ << 8;
 524                                         dev->buf_len--;
 525                                 }
 526                         } else
 527                                 dev_err(dev->dev, "XRDY IRQ while no "
 528                                         "data to send\n");
 529                         omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 530                         omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY);
 531                         continue;
 532                 }
 533                 if (stat & OMAP_I2C_STAT_ROVR) {
 534                         dev_err(dev->dev, "Receive overrun\n");
 535                         dev->cmd_err |= OMAP_I2C_STAT_ROVR;
 536                 }
 537                 if (stat & OMAP_I2C_STAT_XUDF) {
 538                         dev_err(dev->dev, "Transmit overflow\n");
 539                         dev->cmd_err |= OMAP_I2C_STAT_XUDF;
 540                 }
 541                 if (stat & OMAP_I2C_STAT_NACK) {
 542                         omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
 543                         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
 544                                            OMAP_I2C_CON_STP);
 545                 }
 546                 if (stat & OMAP_I2C_STAT_AL) {
 547                         dev_err(dev->dev, "Arbitration lost\n");
 548                         omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
 549                 }
 550         }
 551
 552         return count ? IRQ_HANDLED : IRQ_NONE;
 553 }
 554
 555 static const struct i2c_algorithm omap_i2c_algo = {
 556         .master_xfer    = omap_i2c_xfer,
 557         .functionality  = omap_i2c_func,
 558 };
 559
 560 static int
 561 omap_i2c_probe(struct platform_device *pdev)
 562 {
 563         struct omap_i2c_dev     *dev;
 564         struct i2c_adapter      *adap;
 565         struct resource         *mem, *irq, *ioarea;
 566         int r;
 567
 568         /* NOTE: driver uses the static register mapping */
 569         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 570         if (!mem) {
 571                 dev_err(&pdev->dev, "no mem resource?\n");
 572                 return -ENODEV;
 573         }
 574         irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 575         if (!irq) {
 576                 dev_err(&pdev->dev, "no irq resource?\n");
 577                 return -ENODEV;
 578         }
 579
 580         ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
 581                         pdev->name);
 582         if (!ioarea) {
 583                 dev_err(&pdev->dev, "I2C region already claimed\n");
 584                 return -EBUSY;
 585         }
 586
 587         if (clock > 200)
 588                 clock = 400;    /* Fast mode */
 589         else
 590                 clock = 100;    /* Standard mode */
 591
 592         dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL);
 593         if (!dev) {
 594                 r = -ENOMEM;
 595                 goto err_release_region;
 596         }
 597
 598         dev->dev = &pdev->dev;
 599         dev->irq = irq->start;
 600         dev->base = ioremap(mem->start, mem->end - mem->start + 1);
 601         if (!dev->base) {
 602                 r = -ENOMEM;
 603                 goto err_free_mem;
 604         }
 605
 606         platform_set_drvdata(pdev, dev);
 607
 608         if ((r = omap_i2c_get_clocks(dev)) != 0)
 609                 goto err_iounmap;
 610
 611         omap_i2c_unidle(dev);
 612
 613         if (cpu_is_omap15xx())
 614                 dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
 615
 616         /* reset ASAP, clearing any IRQs */
 617         omap_i2c_init(dev);
 618
 619         r = request_irq(dev->irq, dev->rev1 ? omap_i2c_rev1_isr : omap_i2c_isr,
 620                         0, pdev->name, dev);
 621
 622         if (r) {
 623                 dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
 624                 goto err_unuse_clocks;
 625         }
 626         r = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 627         dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
 628                  pdev->id, r >> 4, r & 0xf, clock);
 629
 630         adap = &dev->adapter;
 631         i2c_set_adapdata(adap, dev);
 632         adap->owner = THIS_MODULE;
 633         adap->class = I2C_CLASS_HWMON;
 634         strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
 635         adap->algo = &omap_i2c_algo;
 636         adap->dev.parent = &pdev->dev;
 637
 638         /* i2c device drivers may be active on return from add_adapter() */
 639         adap->nr = pdev->id;
 640         r = i2c_add_numbered_adapter(adap);
 641         if (r) {
 642                 dev_err(dev->dev, "failure adding adapter\n");
 643                 goto err_free_irq;
 644         }
 645
 646         omap_i2c_idle(dev);
 647
 648         return 0;
 649
 650 err_free_irq:
 651         free_irq(dev->irq, dev);
 652 err_unuse_clocks:
 653         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 654         omap_i2c_idle(dev);
 655         omap_i2c_put_clocks(dev);
 656 err_iounmap:
 657         iounmap(dev->base);
 658 err_free_mem:
 659         platform_set_drvdata(pdev, NULL);
 660         kfree(dev);
 661 err_release_region:
 662         release_mem_region(mem->start, (mem->end - mem->start) + 1);
 663
 664         return r;
 665 }
 666
 667 static int
 668 omap_i2c_remove(struct platform_device *pdev)
 669 {
 670         struct omap_i2c_dev     *dev = platform_get_drvdata(pdev);
 671         struct resource         *mem;
 672
 673         platform_set_drvdata(pdev, NULL);
 674
 675         free_irq(dev->irq, dev);
 676         i2c_del_adapter(&dev->adapter);
 677         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 678         omap_i2c_put_clocks(dev);
 679         iounmap(dev->base);
 680         kfree(dev);
 681         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 682         release_mem_region(mem->start, (mem->end - mem->start) + 1);
 683         return 0;
 684 }
 685
 686 static struct platform_driver omap_i2c_driver = {
 687         .probe          = omap_i2c_probe,
 688         .remove         = omap_i2c_remove,
 689         .driver         = {
 690                 .name   = "i2c_omap",
 691                 .owner  = THIS_MODULE,
 692         },
 693 };
 694
 695 /* I2C may be needed to bring up other drivers */
 696 static int __init
 697 omap_i2c_init_driver(void)
 698 {
 699         return platform_driver_register(&omap_i2c_driver);
 700 }
 701 subsys_initcall(omap_i2c_init_driver);
 702
 703 static void __exit omap_i2c_exit_driver(void)
 704 {
 705         platform_driver_unregister(&omap_i2c_driver);
 706 }
 707 module_exit(omap_i2c_exit_driver);
 708
 709 MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
 710 MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
 711 MODULE_LICENSE("GPL");
 712 MODULE_ALIAS("platform:i2c_omap");