]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - arch/x86/kernel/vmi_32.c
8b6c393ab9fd14f06b86d9deb656b3643d9006f3
[linux-2.6-omap-h63xx.git] / arch / x86 / kernel / vmi_32.c
1 /*
2  * VMI specific paravirt-ops implementation
3  *
4  * Copyright (C) 2005, VMware, Inc.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful, but
12  * WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
14  * NON INFRINGEMENT.  See the GNU General Public License for more
15  * details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20  *
21  * Send feedback to zach@vmware.com
22  *
23  */
24
25 #include <linux/module.h>
26 #include <linux/cpu.h>
27 #include <linux/bootmem.h>
28 #include <linux/mm.h>
29 #include <linux/highmem.h>
30 #include <linux/sched.h>
31 #include <asm/vmi.h>
32 #include <asm/io.h>
33 #include <asm/fixmap.h>
34 #include <asm/apicdef.h>
35 #include <asm/apic.h>
36 #include <asm/processor.h>
37 #include <asm/timer.h>
38 #include <asm/vmi_time.h>
39 #include <asm/kmap_types.h>
40 #include <asm/setup.h>
41
42 /* Convenient for calling VMI functions indirectly in the ROM */
43 typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void);
44 typedef u64 __attribute__((regparm(2))) (VROMLONGFUNC)(int);
45
46 #define call_vrom_func(rom,func) \
47    (((VROMFUNC *)(rom->func))())
48
49 #define call_vrom_long_func(rom,func,arg) \
50    (((VROMLONGFUNC *)(rom->func)) (arg))
51
52 static struct vrom_header *vmi_rom;
53 static int disable_pge;
54 static int disable_pse;
55 static int disable_sep;
56 static int disable_tsc;
57 static int disable_mtrr;
58 static int disable_noidle;
59 static int disable_vmi_timer;
60
61 /* Cached VMI operations */
62 static struct {
63         void (*cpuid)(void /* non-c */);
64         void (*_set_ldt)(u32 selector);
65         void (*set_tr)(u32 selector);
66         void (*write_idt_entry)(struct desc_struct *, int, u32, u32);
67         void (*write_gdt_entry)(struct desc_struct *, int, u32, u32);
68         void (*write_ldt_entry)(struct desc_struct *, int, u32, u32);
69         void (*set_kernel_stack)(u32 selector, u32 sp0);
70         void (*allocate_page)(u32, u32, u32, u32, u32);
71         void (*release_page)(u32, u32);
72         void (*set_pte)(pte_t, pte_t *, unsigned);
73         void (*update_pte)(pte_t *, unsigned);
74         void (*set_linear_mapping)(int, void *, u32, u32);
75         void (*_flush_tlb)(int);
76         void (*set_initial_ap_state)(int, int);
77         void (*halt)(void);
78         void (*set_lazy_mode)(int mode);
79 } vmi_ops;
80
81 /* Cached VMI operations */
82 struct vmi_timer_ops vmi_timer_ops;
83
84 /*
85  * VMI patching routines.
86  */
87 #define MNEM_CALL 0xe8
88 #define MNEM_JMP  0xe9
89 #define MNEM_RET  0xc3
90
91 #define IRQ_PATCH_INT_MASK 0
92 #define IRQ_PATCH_DISABLE  5
93
94 static inline void patch_offset(void *insnbuf,
95                                 unsigned long ip, unsigned long dest)
96 {
97         *(unsigned long *)(insnbuf+1) = dest-ip-5;
98 }
99
100 static unsigned patch_internal(int call, unsigned len, void *insnbuf,
101                                unsigned long ip)
102 {
103         u64 reloc;
104         struct vmi_relocation_info *const rel = (struct vmi_relocation_info *)&reloc;
105         reloc = call_vrom_long_func(vmi_rom, get_reloc, call);
106         switch(rel->type) {
107                 case VMI_RELOCATION_CALL_REL:
108                         BUG_ON(len < 5);
109                         *(char *)insnbuf = MNEM_CALL;
110                         patch_offset(insnbuf, ip, (unsigned long)rel->eip);
111                         return 5;
112
113                 case VMI_RELOCATION_JUMP_REL:
114                         BUG_ON(len < 5);
115                         *(char *)insnbuf = MNEM_JMP;
116                         patch_offset(insnbuf, ip, (unsigned long)rel->eip);
117                         return 5;
118
119                 case VMI_RELOCATION_NOP:
120                         /* obliterate the whole thing */
121                         return 0;
122
123                 case VMI_RELOCATION_NONE:
124                         /* leave native code in place */
125                         break;
126
127                 default:
128                         BUG();
129         }
130         return len;
131 }
132
133 /*
134  * Apply patch if appropriate, return length of new instruction
135  * sequence.  The callee does nop padding for us.
136  */
137 static unsigned vmi_patch(u8 type, u16 clobbers, void *insns,
138                           unsigned long ip, unsigned len)
139 {
140         switch (type) {
141                 case PARAVIRT_PATCH(pv_irq_ops.irq_disable):
142                         return patch_internal(VMI_CALL_DisableInterrupts, len,
143                                               insns, ip);
144                 case PARAVIRT_PATCH(pv_irq_ops.irq_enable):
145                         return patch_internal(VMI_CALL_EnableInterrupts, len,
146                                               insns, ip);
147                 case PARAVIRT_PATCH(pv_irq_ops.restore_fl):
148                         return patch_internal(VMI_CALL_SetInterruptMask, len,
149                                               insns, ip);
150                 case PARAVIRT_PATCH(pv_irq_ops.save_fl):
151                         return patch_internal(VMI_CALL_GetInterruptMask, len,
152                                               insns, ip);
153                 case PARAVIRT_PATCH(pv_cpu_ops.iret):
154                         return patch_internal(VMI_CALL_IRET, len, insns, ip);
155                 case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit):
156                         return patch_internal(VMI_CALL_SYSEXIT, len, insns, ip);
157                 default:
158                         break;
159         }
160         return len;
161 }
162
163 /* CPUID has non-C semantics, and paravirt-ops API doesn't match hardware ISA */
164 static void vmi_cpuid(unsigned int *ax, unsigned int *bx,
165                                unsigned int *cx, unsigned int *dx)
166 {
167         int override = 0;
168         if (*ax == 1)
169                 override = 1;
170         asm volatile ("call *%6"
171                       : "=a" (*ax),
172                         "=b" (*bx),
173                         "=c" (*cx),
174                         "=d" (*dx)
175                       : "0" (*ax), "2" (*cx), "r" (vmi_ops.cpuid));
176         if (override) {
177                 if (disable_pse)
178                         *dx &= ~X86_FEATURE_PSE;
179                 if (disable_pge)
180                         *dx &= ~X86_FEATURE_PGE;
181                 if (disable_sep)
182                         *dx &= ~X86_FEATURE_SEP;
183                 if (disable_tsc)
184                         *dx &= ~X86_FEATURE_TSC;
185                 if (disable_mtrr)
186                         *dx &= ~X86_FEATURE_MTRR;
187         }
188 }
189
190 static inline void vmi_maybe_load_tls(struct desc_struct *gdt, int nr, struct desc_struct *new)
191 {
192         if (gdt[nr].a != new->a || gdt[nr].b != new->b)
193                 write_gdt_entry(gdt, nr, new, 0);
194 }
195
196 static void vmi_load_tls(struct thread_struct *t, unsigned int cpu)
197 {
198         struct desc_struct *gdt = get_cpu_gdt_table(cpu);
199         vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 0, &t->tls_array[0]);
200         vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 1, &t->tls_array[1]);
201         vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 2, &t->tls_array[2]);
202 }
203
204 static void vmi_set_ldt(const void *addr, unsigned entries)
205 {
206         unsigned cpu = smp_processor_id();
207         struct desc_struct desc;
208
209         pack_descriptor(&desc, (unsigned long)addr,
210                         entries * sizeof(struct desc_struct) - 1,
211                         DESC_LDT, 0);
212         write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, &desc, DESC_LDT);
213         vmi_ops._set_ldt(entries ? GDT_ENTRY_LDT*sizeof(struct desc_struct) : 0);
214 }
215
216 static void vmi_set_tr(void)
217 {
218         vmi_ops.set_tr(GDT_ENTRY_TSS*sizeof(struct desc_struct));
219 }
220
221 static void vmi_write_idt_entry(gate_desc *dt, int entry, const gate_desc *g)
222 {
223         u32 *idt_entry = (u32 *)g;
224         vmi_ops.write_idt_entry(dt, entry, idt_entry[0], idt_entry[1]);
225 }
226
227 static void vmi_write_gdt_entry(struct desc_struct *dt, int entry,
228                                 const void *desc, int type)
229 {
230         u32 *gdt_entry = (u32 *)desc;
231         vmi_ops.write_gdt_entry(dt, entry, gdt_entry[0], gdt_entry[1]);
232 }
233
234 static void vmi_write_ldt_entry(struct desc_struct *dt, int entry,
235                                 const void *desc)
236 {
237         u32 *ldt_entry = (u32 *)desc;
238         vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
239 }
240
241 static void vmi_load_sp0(struct tss_struct *tss,
242                                    struct thread_struct *thread)
243 {
244         tss->x86_tss.sp0 = thread->sp0;
245
246         /* This can only happen when SEP is enabled, no need to test "SEP"arately */
247         if (unlikely(tss->x86_tss.ss1 != thread->sysenter_cs)) {
248                 tss->x86_tss.ss1 = thread->sysenter_cs;
249                 wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0);
250         }
251         vmi_ops.set_kernel_stack(__KERNEL_DS, tss->x86_tss.sp0);
252 }
253
254 static void vmi_flush_tlb_user(void)
255 {
256         vmi_ops._flush_tlb(VMI_FLUSH_TLB);
257 }
258
259 static void vmi_flush_tlb_kernel(void)
260 {
261         vmi_ops._flush_tlb(VMI_FLUSH_TLB | VMI_FLUSH_GLOBAL);
262 }
263
264 /* Stub to do nothing at all; used for delays and unimplemented calls */
265 static void vmi_nop(void)
266 {
267 }
268
269 #ifdef CONFIG_DEBUG_PAGE_TYPE
270
271 #ifdef CONFIG_X86_PAE
272 #define MAX_BOOT_PTS (2048+4+1)
273 #else
274 #define MAX_BOOT_PTS (1024+1)
275 #endif
276
277 /*
278  * During boot, mem_map is not yet available in paging_init, so stash
279  * all the boot page allocations here.
280  */
281 static struct {
282         u32 pfn;
283         int type;
284 } boot_page_allocations[MAX_BOOT_PTS];
285 static int num_boot_page_allocations;
286 static int boot_allocations_applied;
287
288 void vmi_apply_boot_page_allocations(void)
289 {
290         int i;
291         BUG_ON(!mem_map);
292         for (i = 0; i < num_boot_page_allocations; i++) {
293                 struct page *page = pfn_to_page(boot_page_allocations[i].pfn);
294                 page->type = boot_page_allocations[i].type;
295                 page->type = boot_page_allocations[i].type &
296                                 ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE);
297         }
298         boot_allocations_applied = 1;
299 }
300
301 static void record_page_type(u32 pfn, int type)
302 {
303         BUG_ON(num_boot_page_allocations >= MAX_BOOT_PTS);
304         boot_page_allocations[num_boot_page_allocations].pfn = pfn;
305         boot_page_allocations[num_boot_page_allocations].type = type;
306         num_boot_page_allocations++;
307 }
308
309 static void check_zeroed_page(u32 pfn, int type, struct page *page)
310 {
311         u32 *ptr;
312         int i;
313         int limit = PAGE_SIZE / sizeof(int);
314
315         if (page_address(page))
316                 ptr = (u32 *)page_address(page);
317         else
318                 ptr = (u32 *)__va(pfn << PAGE_SHIFT);
319         /*
320          * When cloning the root in non-PAE mode, only the userspace
321          * pdes need to be zeroed.
322          */
323         if (type & VMI_PAGE_CLONE)
324                 limit = KERNEL_PGD_BOUNDARY;
325         for (i = 0; i < limit; i++)
326                 BUG_ON(ptr[i]);
327 }
328
329 /*
330  * We stash the page type into struct page so we can verify the page
331  * types are used properly.
332  */
333 static void vmi_set_page_type(u32 pfn, int type)
334 {
335         /* PAE can have multiple roots per page - don't track */
336         if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP))
337                 return;
338
339         if (boot_allocations_applied) {
340                 struct page *page = pfn_to_page(pfn);
341                 if (type != VMI_PAGE_NORMAL)
342                         BUG_ON(page->type);
343                 else
344                         BUG_ON(page->type == VMI_PAGE_NORMAL);
345                 page->type = type & ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE);
346                 if (type & VMI_PAGE_ZEROED)
347                         check_zeroed_page(pfn, type, page);
348         } else {
349                 record_page_type(pfn, type);
350         }
351 }
352
353 static void vmi_check_page_type(u32 pfn, int type)
354 {
355         /* PAE can have multiple roots per page - skip checks */
356         if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP))
357                 return;
358
359         type &= ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE);
360         if (boot_allocations_applied) {
361                 struct page *page = pfn_to_page(pfn);
362                 BUG_ON((page->type ^ type) & VMI_PAGE_PAE);
363                 BUG_ON(type == VMI_PAGE_NORMAL && page->type);
364                 BUG_ON((type & page->type) == 0);
365         }
366 }
367 #else
368 #define vmi_set_page_type(p,t) do { } while (0)
369 #define vmi_check_page_type(p,t) do { } while (0)
370 #endif
371
372 #ifdef CONFIG_HIGHPTE
373 static void *vmi_kmap_atomic_pte(struct page *page, enum km_type type)
374 {
375         void *va = kmap_atomic(page, type);
376
377         /*
378          * Internally, the VMI ROM must map virtual addresses to physical
379          * addresses for processing MMU updates.  By the time MMU updates
380          * are issued, this information is typically already lost.
381          * Fortunately, the VMI provides a cache of mapping slots for active
382          * page tables.
383          *
384          * We use slot zero for the linear mapping of physical memory, and
385          * in HIGHPTE kernels, slot 1 and 2 for KM_PTE0 and KM_PTE1.
386          *
387          *  args:                 SLOT                 VA    COUNT PFN
388          */
389         BUG_ON(type != KM_PTE0 && type != KM_PTE1);
390         vmi_ops.set_linear_mapping((type - KM_PTE0)+1, va, 1, page_to_pfn(page));
391
392         return va;
393 }
394 #endif
395
396 static void vmi_allocate_pte(struct mm_struct *mm, unsigned long pfn)
397 {
398         vmi_set_page_type(pfn, VMI_PAGE_L1);
399         vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0);
400 }
401
402 static void vmi_allocate_pmd(struct mm_struct *mm, unsigned long pfn)
403 {
404         /*
405          * This call comes in very early, before mem_map is setup.
406          * It is called only for swapper_pg_dir, which already has
407          * data on it.
408          */
409         vmi_set_page_type(pfn, VMI_PAGE_L2);
410         vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0);
411 }
412
413 static void vmi_allocate_pmd_clone(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count)
414 {
415         vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE);
416         vmi_check_page_type(clonepfn, VMI_PAGE_L2);
417         vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count);
418 }
419
420 static void vmi_release_pte(unsigned long pfn)
421 {
422         vmi_ops.release_page(pfn, VMI_PAGE_L1);
423         vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
424 }
425
426 static void vmi_release_pmd(unsigned long pfn)
427 {
428         vmi_ops.release_page(pfn, VMI_PAGE_L2);
429         vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
430 }
431
432 /*
433  * Helper macros for MMU update flags.  We can defer updates until a flush
434  * or page invalidation only if the update is to the current address space
435  * (otherwise, there is no flush).  We must check against init_mm, since
436  * this could be a kernel update, which usually passes init_mm, although
437  * sometimes this check can be skipped if we know the particular function
438  * is only called on user mode PTEs.  We could change the kernel to pass
439  * current->active_mm here, but in particular, I was unsure if changing
440  * mm/highmem.c to do this would still be correct on other architectures.
441  */
442 #define is_current_as(mm, mustbeuser) ((mm) == current->active_mm ||    \
443                                        (!mustbeuser && (mm) == &init_mm))
444 #define vmi_flags_addr(mm, addr, level, user)                           \
445         ((level) | (is_current_as(mm, user) ?                           \
446                 (VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0))
447 #define vmi_flags_addr_defer(mm, addr, level, user)                     \
448         ((level) | (is_current_as(mm, user) ?                           \
449                 (VMI_PAGE_DEFER | VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0))
450
451 static void vmi_update_pte(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
452 {
453         vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
454         vmi_ops.update_pte(ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
455 }
456
457 static void vmi_update_pte_defer(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
458 {
459         vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
460         vmi_ops.update_pte(ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 0));
461 }
462
463 static void vmi_set_pte(pte_t *ptep, pte_t pte)
464 {
465         /* XXX because of set_pmd_pte, this can be called on PT or PD layers */
466         vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE | VMI_PAGE_PD);
467         vmi_ops.set_pte(pte, ptep, VMI_PAGE_PT);
468 }
469
470 static void vmi_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
471 {
472         vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
473         vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
474 }
475
476 static void vmi_set_pmd(pmd_t *pmdp, pmd_t pmdval)
477 {
478 #ifdef CONFIG_X86_PAE
479         const pte_t pte = { .pte = pmdval.pmd };
480         vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PMD);
481 #else
482         const pte_t pte = { pmdval.pud.pgd.pgd };
483         vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PGD);
484 #endif
485         vmi_ops.set_pte(pte, (pte_t *)pmdp, VMI_PAGE_PD);
486 }
487
488 #ifdef CONFIG_X86_PAE
489
490 static void vmi_set_pte_atomic(pte_t *ptep, pte_t pteval)
491 {
492         /*
493          * XXX This is called from set_pmd_pte, but at both PT
494          * and PD layers so the VMI_PAGE_PT flag is wrong.  But
495          * it is only called for large page mapping changes,
496          * the Xen backend, doesn't support large pages, and the
497          * ESX backend doesn't depend on the flag.
498          */
499         set_64bit((unsigned long long *)ptep,pte_val(pteval));
500         vmi_ops.update_pte(ptep, VMI_PAGE_PT);
501 }
502
503 static void vmi_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
504 {
505         vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
506         vmi_ops.set_pte(pte, ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 1));
507 }
508
509 static void vmi_set_pud(pud_t *pudp, pud_t pudval)
510 {
511         /* Um, eww */
512         const pte_t pte = { .pte = pudval.pgd.pgd };
513         vmi_check_page_type(__pa(pudp) >> PAGE_SHIFT, VMI_PAGE_PGD);
514         vmi_ops.set_pte(pte, (pte_t *)pudp, VMI_PAGE_PDP);
515 }
516
517 static void vmi_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
518 {
519         const pte_t pte = { .pte = 0 };
520         vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
521         vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
522 }
523
524 static void vmi_pmd_clear(pmd_t *pmd)
525 {
526         const pte_t pte = { .pte = 0 };
527         vmi_check_page_type(__pa(pmd) >> PAGE_SHIFT, VMI_PAGE_PMD);
528         vmi_ops.set_pte(pte, (pte_t *)pmd, VMI_PAGE_PD);
529 }
530 #endif
531
532 #ifdef CONFIG_SMP
533 static void __devinit
534 vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip,
535                      unsigned long start_esp)
536 {
537         struct vmi_ap_state ap;
538
539         /* Default everything to zero.  This is fine for most GPRs. */
540         memset(&ap, 0, sizeof(struct vmi_ap_state));
541
542         ap.gdtr_limit = GDT_SIZE - 1;
543         ap.gdtr_base = (unsigned long) get_cpu_gdt_table(phys_apicid);
544
545         ap.idtr_limit = IDT_ENTRIES * 8 - 1;
546         ap.idtr_base = (unsigned long) idt_table;
547
548         ap.ldtr = 0;
549
550         ap.cs = __KERNEL_CS;
551         ap.eip = (unsigned long) start_eip;
552         ap.ss = __KERNEL_DS;
553         ap.esp = (unsigned long) start_esp;
554
555         ap.ds = __USER_DS;
556         ap.es = __USER_DS;
557         ap.fs = __KERNEL_PERCPU;
558         ap.gs = 0;
559
560         ap.eflags = 0;
561
562 #ifdef CONFIG_X86_PAE
563         /* efer should match BSP efer. */
564         if (cpu_has_nx) {
565                 unsigned l, h;
566                 rdmsr(MSR_EFER, l, h);
567                 ap.efer = (unsigned long long) h << 32 | l;
568         }
569 #endif
570
571         ap.cr3 = __pa(swapper_pg_dir);
572         /* Protected mode, paging, AM, WP, NE, MP. */
573         ap.cr0 = 0x80050023;
574         ap.cr4 = mmu_cr4_features;
575         vmi_ops.set_initial_ap_state((u32)&ap, phys_apicid);
576 }
577 #endif
578
579 static void vmi_enter_lazy_cpu(void)
580 {
581         paravirt_enter_lazy_cpu();
582         vmi_ops.set_lazy_mode(2);
583 }
584
585 static void vmi_enter_lazy_mmu(void)
586 {
587         paravirt_enter_lazy_mmu();
588         vmi_ops.set_lazy_mode(1);
589 }
590
591 static void vmi_leave_lazy(void)
592 {
593         paravirt_leave_lazy(paravirt_get_lazy_mode());
594         vmi_ops.set_lazy_mode(0);
595 }
596
597 static inline int __init check_vmi_rom(struct vrom_header *rom)
598 {
599         struct pci_header *pci;
600         struct pnp_header *pnp;
601         const char *manufacturer = "UNKNOWN";
602         const char *product = "UNKNOWN";
603         const char *license = "unspecified";
604
605         if (rom->rom_signature != 0xaa55)
606                 return 0;
607         if (rom->vrom_signature != VMI_SIGNATURE)
608                 return 0;
609         if (rom->api_version_maj != VMI_API_REV_MAJOR ||
610             rom->api_version_min+1 < VMI_API_REV_MINOR+1) {
611                 printk(KERN_WARNING "VMI: Found mismatched rom version %d.%d\n",
612                                 rom->api_version_maj,
613                                 rom->api_version_min);
614                 return 0;
615         }
616
617         /*
618          * Relying on the VMI_SIGNATURE field is not 100% safe, so check
619          * the PCI header and device type to make sure this is really a
620          * VMI device.
621          */
622         if (!rom->pci_header_offs) {
623                 printk(KERN_WARNING "VMI: ROM does not contain PCI header.\n");
624                 return 0;
625         }
626
627         pci = (struct pci_header *)((char *)rom+rom->pci_header_offs);
628         if (pci->vendorID != PCI_VENDOR_ID_VMWARE ||
629             pci->deviceID != PCI_DEVICE_ID_VMWARE_VMI) {
630                 /* Allow it to run... anyways, but warn */
631                 printk(KERN_WARNING "VMI: ROM from unknown manufacturer\n");
632         }
633
634         if (rom->pnp_header_offs) {
635                 pnp = (struct pnp_header *)((char *)rom+rom->pnp_header_offs);
636                 if (pnp->manufacturer_offset)
637                         manufacturer = (const char *)rom+pnp->manufacturer_offset;
638                 if (pnp->product_offset)
639                         product = (const char *)rom+pnp->product_offset;
640         }
641
642         if (rom->license_offs)
643                 license = (char *)rom+rom->license_offs;
644
645         printk(KERN_INFO "VMI: Found %s %s, API version %d.%d, ROM version %d.%d\n",
646                 manufacturer, product,
647                 rom->api_version_maj, rom->api_version_min,
648                 pci->rom_version_maj, pci->rom_version_min);
649
650         /* Don't allow BSD/MIT here for now because we don't want to end up
651            with any binary only shim layers */
652         if (strcmp(license, "GPL") && strcmp(license, "GPL v2")) {
653                 printk(KERN_WARNING "VMI: Non GPL license `%s' found for ROM. Not used.\n",
654                         license);
655                 return 0;
656         }
657
658         return 1;
659 }
660
661 /*
662  * Probe for the VMI option ROM
663  */
664 static inline int __init probe_vmi_rom(void)
665 {
666         unsigned long base;
667
668         /* VMI ROM is in option ROM area, check signature */
669         for (base = 0xC0000; base < 0xE0000; base += 2048) {
670                 struct vrom_header *romstart;
671                 romstart = (struct vrom_header *)isa_bus_to_virt(base);
672                 if (check_vmi_rom(romstart)) {
673                         vmi_rom = romstart;
674                         return 1;
675                 }
676         }
677         return 0;
678 }
679
680 /*
681  * VMI setup common to all processors
682  */
683 void vmi_bringup(void)
684 {
685         /* We must establish the lowmem mapping for MMU ops to work */
686         if (vmi_ops.set_linear_mapping)
687                 vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, MAXMEM_PFN, 0);
688 }
689
690 /*
691  * Return a pointer to a VMI function or NULL if unimplemented
692  */
693 static void *vmi_get_function(int vmicall)
694 {
695         u64 reloc;
696         const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc;
697         reloc = call_vrom_long_func(vmi_rom, get_reloc, vmicall);
698         BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL);
699         if (rel->type == VMI_RELOCATION_CALL_REL)
700                 return (void *)rel->eip;
701         else
702                 return NULL;
703 }
704
705 /*
706  * Helper macro for making the VMI paravirt-ops fill code readable.
707  * For unimplemented operations, fall back to default, unless nop
708  * is returned by the ROM.
709  */
710 #define para_fill(opname, vmicall)                              \
711 do {                                                            \
712         reloc = call_vrom_long_func(vmi_rom, get_reloc,         \
713                                     VMI_CALL_##vmicall);        \
714         if (rel->type == VMI_RELOCATION_CALL_REL)               \
715                 opname = (void *)rel->eip;                      \
716         else if (rel->type == VMI_RELOCATION_NOP)               \
717                 opname = (void *)vmi_nop;                       \
718         else if (rel->type != VMI_RELOCATION_NONE)              \
719                 printk(KERN_WARNING "VMI: Unknown relocation "  \
720                                     "type %d for " #vmicall"\n",\
721                                         rel->type);             \
722 } while (0)
723
724 /*
725  * Helper macro for making the VMI paravirt-ops fill code readable.
726  * For cached operations which do not match the VMI ROM ABI and must
727  * go through a tranlation stub.  Ignore NOPs, since it is not clear
728  * a NOP * VMI function corresponds to a NOP paravirt-op when the
729  * functions are not in 1-1 correspondence.
730  */
731 #define para_wrap(opname, wrapper, cache, vmicall)              \
732 do {                                                            \
733         reloc = call_vrom_long_func(vmi_rom, get_reloc,         \
734                                     VMI_CALL_##vmicall);        \
735         BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL);           \
736         if (rel->type == VMI_RELOCATION_CALL_REL) {             \
737                 opname = wrapper;                               \
738                 vmi_ops.cache = (void *)rel->eip;               \
739         }                                                       \
740 } while (0)
741
742 /*
743  * Activate the VMI interface and switch into paravirtualized mode
744  */
745 static inline int __init activate_vmi(void)
746 {
747         short kernel_cs;
748         u64 reloc;
749         const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc;
750
751         if (call_vrom_func(vmi_rom, vmi_init) != 0) {
752                 printk(KERN_ERR "VMI ROM failed to initialize!");
753                 return 0;
754         }
755         savesegment(cs, kernel_cs);
756
757         pv_info.paravirt_enabled = 1;
758         pv_info.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK;
759         pv_info.name = "vmi";
760
761         pv_init_ops.patch = vmi_patch;
762
763         /*
764          * Many of these operations are ABI compatible with VMI.
765          * This means we can fill in the paravirt-ops with direct
766          * pointers into the VMI ROM.  If the calling convention for
767          * these operations changes, this code needs to be updated.
768          *
769          * Exceptions
770          *  CPUID paravirt-op uses pointers, not the native ISA
771          *  halt has no VMI equivalent; all VMI halts are "safe"
772          *  no MSR support yet - just trap and emulate.  VMI uses the
773          *    same ABI as the native ISA, but Linux wants exceptions
774          *    from bogus MSR read / write handled
775          *  rdpmc is not yet used in Linux
776          */
777
778         /* CPUID is special, so very special it gets wrapped like a present */
779         para_wrap(pv_cpu_ops.cpuid, vmi_cpuid, cpuid, CPUID);
780
781         para_fill(pv_cpu_ops.clts, CLTS);
782         para_fill(pv_cpu_ops.get_debugreg, GetDR);
783         para_fill(pv_cpu_ops.set_debugreg, SetDR);
784         para_fill(pv_cpu_ops.read_cr0, GetCR0);
785         para_fill(pv_mmu_ops.read_cr2, GetCR2);
786         para_fill(pv_mmu_ops.read_cr3, GetCR3);
787         para_fill(pv_cpu_ops.read_cr4, GetCR4);
788         para_fill(pv_cpu_ops.write_cr0, SetCR0);
789         para_fill(pv_mmu_ops.write_cr2, SetCR2);
790         para_fill(pv_mmu_ops.write_cr3, SetCR3);
791         para_fill(pv_cpu_ops.write_cr4, SetCR4);
792         para_fill(pv_irq_ops.save_fl, GetInterruptMask);
793         para_fill(pv_irq_ops.restore_fl, SetInterruptMask);
794         para_fill(pv_irq_ops.irq_disable, DisableInterrupts);
795         para_fill(pv_irq_ops.irq_enable, EnableInterrupts);
796
797         para_fill(pv_cpu_ops.wbinvd, WBINVD);
798         para_fill(pv_cpu_ops.read_tsc, RDTSC);
799
800         /* The following we emulate with trap and emulate for now */
801         /* paravirt_ops.read_msr = vmi_rdmsr */
802         /* paravirt_ops.write_msr = vmi_wrmsr */
803         /* paravirt_ops.rdpmc = vmi_rdpmc */
804
805         /* TR interface doesn't pass TR value, wrap */
806         para_wrap(pv_cpu_ops.load_tr_desc, vmi_set_tr, set_tr, SetTR);
807
808         /* LDT is special, too */
809         para_wrap(pv_cpu_ops.set_ldt, vmi_set_ldt, _set_ldt, SetLDT);
810
811         para_fill(pv_cpu_ops.load_gdt, SetGDT);
812         para_fill(pv_cpu_ops.load_idt, SetIDT);
813         para_fill(pv_cpu_ops.store_gdt, GetGDT);
814         para_fill(pv_cpu_ops.store_idt, GetIDT);
815         para_fill(pv_cpu_ops.store_tr, GetTR);
816         pv_cpu_ops.load_tls = vmi_load_tls;
817         para_wrap(pv_cpu_ops.write_ldt_entry, vmi_write_ldt_entry,
818                   write_ldt_entry, WriteLDTEntry);
819         para_wrap(pv_cpu_ops.write_gdt_entry, vmi_write_gdt_entry,
820                   write_gdt_entry, WriteGDTEntry);
821         para_wrap(pv_cpu_ops.write_idt_entry, vmi_write_idt_entry,
822                   write_idt_entry, WriteIDTEntry);
823         para_wrap(pv_cpu_ops.load_sp0, vmi_load_sp0, set_kernel_stack, UpdateKernelStack);
824         para_fill(pv_cpu_ops.set_iopl_mask, SetIOPLMask);
825         para_fill(pv_cpu_ops.io_delay, IODelay);
826
827         para_wrap(pv_cpu_ops.lazy_mode.enter, vmi_enter_lazy_cpu,
828                   set_lazy_mode, SetLazyMode);
829         para_wrap(pv_cpu_ops.lazy_mode.leave, vmi_leave_lazy,
830                   set_lazy_mode, SetLazyMode);
831
832         para_wrap(pv_mmu_ops.lazy_mode.enter, vmi_enter_lazy_mmu,
833                   set_lazy_mode, SetLazyMode);
834         para_wrap(pv_mmu_ops.lazy_mode.leave, vmi_leave_lazy,
835                   set_lazy_mode, SetLazyMode);
836
837         /* user and kernel flush are just handled with different flags to FlushTLB */
838         para_wrap(pv_mmu_ops.flush_tlb_user, vmi_flush_tlb_user, _flush_tlb, FlushTLB);
839         para_wrap(pv_mmu_ops.flush_tlb_kernel, vmi_flush_tlb_kernel, _flush_tlb, FlushTLB);
840         para_fill(pv_mmu_ops.flush_tlb_single, InvalPage);
841
842         /*
843          * Until a standard flag format can be agreed on, we need to
844          * implement these as wrappers in Linux.  Get the VMI ROM
845          * function pointers for the two backend calls.
846          */
847 #ifdef CONFIG_X86_PAE
848         vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxELong);
849         vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxELong);
850 #else
851         vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxE);
852         vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxE);
853 #endif
854
855         if (vmi_ops.set_pte) {
856                 pv_mmu_ops.set_pte = vmi_set_pte;
857                 pv_mmu_ops.set_pte_at = vmi_set_pte_at;
858                 pv_mmu_ops.set_pmd = vmi_set_pmd;
859 #ifdef CONFIG_X86_PAE
860                 pv_mmu_ops.set_pte_atomic = vmi_set_pte_atomic;
861                 pv_mmu_ops.set_pte_present = vmi_set_pte_present;
862                 pv_mmu_ops.set_pud = vmi_set_pud;
863                 pv_mmu_ops.pte_clear = vmi_pte_clear;
864                 pv_mmu_ops.pmd_clear = vmi_pmd_clear;
865 #endif
866         }
867
868         if (vmi_ops.update_pte) {
869                 pv_mmu_ops.pte_update = vmi_update_pte;
870                 pv_mmu_ops.pte_update_defer = vmi_update_pte_defer;
871         }
872
873         vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage);
874         if (vmi_ops.allocate_page) {
875                 pv_mmu_ops.alloc_pte = vmi_allocate_pte;
876                 pv_mmu_ops.alloc_pmd = vmi_allocate_pmd;
877                 pv_mmu_ops.alloc_pmd_clone = vmi_allocate_pmd_clone;
878         }
879
880         vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage);
881         if (vmi_ops.release_page) {
882                 pv_mmu_ops.release_pte = vmi_release_pte;
883                 pv_mmu_ops.release_pmd = vmi_release_pmd;
884         }
885
886         /* Set linear is needed in all cases */
887         vmi_ops.set_linear_mapping = vmi_get_function(VMI_CALL_SetLinearMapping);
888 #ifdef CONFIG_HIGHPTE
889         if (vmi_ops.set_linear_mapping)
890                 pv_mmu_ops.kmap_atomic_pte = vmi_kmap_atomic_pte;
891 #endif
892
893         /*
894          * These MUST always be patched.  Don't support indirect jumps
895          * through these operations, as the VMI interface may use either
896          * a jump or a call to get to these operations, depending on
897          * the backend.  They are performance critical anyway, so requiring
898          * a patch is not a big problem.
899          */
900         pv_cpu_ops.irq_enable_sysexit = (void *)0xfeedbab0;
901         pv_cpu_ops.iret = (void *)0xbadbab0;
902
903 #ifdef CONFIG_SMP
904         para_wrap(pv_apic_ops.startup_ipi_hook, vmi_startup_ipi_hook, set_initial_ap_state, SetInitialAPState);
905 #endif
906
907 #ifdef CONFIG_X86_LOCAL_APIC
908        para_fill(apic_ops->read, APICRead);
909        para_fill(apic_ops->write, APICWrite);
910 #endif
911
912         /*
913          * Check for VMI timer functionality by probing for a cycle frequency method
914          */
915         reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_GetCycleFrequency);
916         if (!disable_vmi_timer && rel->type != VMI_RELOCATION_NONE) {
917                 vmi_timer_ops.get_cycle_frequency = (void *)rel->eip;
918                 vmi_timer_ops.get_cycle_counter =
919                         vmi_get_function(VMI_CALL_GetCycleCounter);
920                 vmi_timer_ops.get_wallclock =
921                         vmi_get_function(VMI_CALL_GetWallclockTime);
922                 vmi_timer_ops.wallclock_updated =
923                         vmi_get_function(VMI_CALL_WallclockUpdated);
924                 vmi_timer_ops.set_alarm = vmi_get_function(VMI_CALL_SetAlarm);
925                 vmi_timer_ops.cancel_alarm =
926                          vmi_get_function(VMI_CALL_CancelAlarm);
927                 pv_time_ops.time_init = vmi_time_init;
928                 pv_time_ops.get_wallclock = vmi_get_wallclock;
929                 pv_time_ops.set_wallclock = vmi_set_wallclock;
930 #ifdef CONFIG_X86_LOCAL_APIC
931                 pv_apic_ops.setup_boot_clock = vmi_time_bsp_init;
932                 pv_apic_ops.setup_secondary_clock = vmi_time_ap_init;
933 #endif
934                 pv_time_ops.sched_clock = vmi_sched_clock;
935                 pv_time_ops.get_tsc_khz = vmi_tsc_khz;
936
937                 /* We have true wallclock functions; disable CMOS clock sync */
938                 no_sync_cmos_clock = 1;
939         } else {
940                 disable_noidle = 1;
941                 disable_vmi_timer = 1;
942         }
943
944         para_fill(pv_irq_ops.safe_halt, Halt);
945
946         /*
947          * Alternative instruction rewriting doesn't happen soon enough
948          * to convert VMI_IRET to a call instead of a jump; so we have
949          * to do this before IRQs get reenabled.  Fortunately, it is
950          * idempotent.
951          */
952         apply_paravirt(__parainstructions, __parainstructions_end);
953
954         vmi_bringup();
955
956         return 1;
957 }
958
959 #undef para_fill
960
961 void __init vmi_init(void)
962 {
963         unsigned long flags;
964
965         if (!vmi_rom)
966                 probe_vmi_rom();
967         else
968                 check_vmi_rom(vmi_rom);
969
970         /* In case probing for or validating the ROM failed, basil */
971         if (!vmi_rom)
972                 return;
973
974         reserve_top_address(-vmi_rom->virtual_top);
975
976         local_irq_save(flags);
977         activate_vmi();
978
979 #ifdef CONFIG_X86_IO_APIC
980         /* This is virtual hardware; timer routing is wired correctly */
981         no_timer_check = 1;
982 #endif
983         local_irq_restore(flags & X86_EFLAGS_IF);
984 }
985
986 static int __init parse_vmi(char *arg)
987 {
988         if (!arg)
989                 return -EINVAL;
990
991         if (!strcmp(arg, "disable_pge")) {
992                 clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
993                 disable_pge = 1;
994         } else if (!strcmp(arg, "disable_pse")) {
995                 clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PSE);
996                 disable_pse = 1;
997         } else if (!strcmp(arg, "disable_sep")) {
998                 clear_cpu_cap(&boot_cpu_data, X86_FEATURE_SEP);
999                 disable_sep = 1;
1000         } else if (!strcmp(arg, "disable_tsc")) {
1001                 clear_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC);
1002                 disable_tsc = 1;
1003         } else if (!strcmp(arg, "disable_mtrr")) {
1004                 clear_cpu_cap(&boot_cpu_data, X86_FEATURE_MTRR);
1005                 disable_mtrr = 1;
1006         } else if (!strcmp(arg, "disable_timer")) {
1007                 disable_vmi_timer = 1;
1008                 disable_noidle = 1;
1009         } else if (!strcmp(arg, "disable_noidle"))
1010                 disable_noidle = 1;
1011         return 0;
1012 }
1013
1014 early_param("vmi", parse_vmi);