arch/arm/plat-omap/include/mach/mux.h

   1 /*
   2  * arch/arm/plat-omap/include/mach/mux.h
   3  *
   4  * Table of the Omap register configurations for the FUNC_MUX and
   5  * PULL_DWN combinations.
   6  *
   7  * Copyright (C) 2004 - 2008 Texas Instruments Inc.
   8  * Copyright (C) 2003 - 2008 Nokia Corporation
   9  *
  10  * Written by Tony Lindgren
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License as published by
  14  * the Free Software Foundation; either version 2 of the License, or
  15  * (at your option) any later version.
  16  *
  17  * This program is distributed in the hope that it will be useful,
  18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  20  * GNU General Public License for more details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  25  *
  26  * NOTE: Please use the following naming style for new pin entries.
  27  *       For example, W8_1610_MMC2_DAT0, where:
  28  *       - W8        = ball
  29  *       - 1610      = 1510 or 1610, none if common for both 1510 and 1610
  30  *       - MMC2_DAT0 = function
  31  */
  32
  33 #ifndef __ASM_ARCH_MUX_H
  34 #define __ASM_ARCH_MUX_H
  35
  36 #define PU_PD_SEL_NA            0       /* No pu_pd reg available */
  37 #define PULL_DWN_CTRL_NA        0       /* No pull-down control needed */
  38
  39 #ifdef  CONFIG_OMAP_MUX_DEBUG
  40 #define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
  41                                         .mux_reg = FUNC_MUX_CTRL_##reg, \
  42                                         .mask_offset = mode_offset, \
  43                                         .mask = mode,
  44
  45 #define PULL_REG(reg, bit, status)      .pull_name = "PULL_DWN_CTRL_"#reg, \
  46                                         .pull_reg = PULL_DWN_CTRL_##reg, \
  47                                         .pull_bit = bit, \
  48                                         .pull_val = status,
  49
  50 #define PU_PD_REG(reg, status)          .pu_pd_name = "PU_PD_SEL_"#reg, \
  51                                         .pu_pd_reg = PU_PD_SEL_##reg, \
  52                                         .pu_pd_val = status,
  53
  54 #define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
  55                                         .mux_reg = OMAP730_IO_CONF_##reg, \
  56                                         .mask_offset = mode_offset, \
  57                                         .mask = mode,
  58
  59 #define PULL_REG_730(reg, bit, status)  .pull_name = "OMAP730_IO_CONF_"#reg, \
  60                                         .pull_reg = OMAP730_IO_CONF_##reg, \
  61                                         .pull_bit = bit, \
  62                                         .pull_val = status,
  63
  64 #else
  65
  66 #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
  67                                         .mask_offset = mode_offset, \
  68                                         .mask = mode,
  69
  70 #define PULL_REG(reg, bit, status)      .pull_reg = PULL_DWN_CTRL_##reg, \
  71                                         .pull_bit = bit, \
  72                                         .pull_val = status,
  73
  74 #define PU_PD_REG(reg, status)          .pu_pd_reg = PU_PD_SEL_##reg, \
  75                                         .pu_pd_val = status,
  76
  77 #define MUX_REG_730(reg, mode_offset, mode) \
  78                                         .mux_reg = OMAP730_IO_CONF_##reg, \
  79                                         .mask_offset = mode_offset, \
  80                                         .mask = mode,
  81
  82 #define PULL_REG_730(reg, bit, status)  .pull_reg = OMAP730_IO_CONF_##reg, \
  83                                         .pull_bit = bit, \
  84                                         .pull_val = status,
  85
  86 #endif /* CONFIG_OMAP_MUX_DEBUG */
  87
  88 #define MUX_CFG(desc, mux_reg, mode_offset, mode,       \
  89                 pull_reg, pull_bit, pull_status,        \
  90                 pu_pd_reg, pu_pd_status, debug_status)  \
  91 {                                                       \
  92         .name =  desc,                                  \
  93         .debug = debug_status,                          \
  94         MUX_REG(mux_reg, mode_offset, mode)             \
  95         PULL_REG(pull_reg, pull_bit, pull_status)       \
  96         PU_PD_REG(pu_pd_reg, pu_pd_status)              \
  97 },
  98
  99
 100 /*
 101  * OMAP730 has a slightly different config for the pin mux.
 102  * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
 103  *   not the FUNC_MUX_CTRL_x regs from hardware.h
 104  * - for pull-up/down, only has one enable bit which is is in the same register
 105  *   as mux config
 106  */
 107 #define MUX_CFG_730(desc, mux_reg, mode_offset, mode,   \
 108                    pull_bit, pull_status, debug_status)\
 109 {                                                       \
 110         .name =  desc,                                  \
 111         .debug = debug_status,                          \
 112         MUX_REG_730(mux_reg, mode_offset, mode)         \
 113         PULL_REG_730(mux_reg, pull_bit, pull_status)    \
 114         PU_PD_REG(NA, 0)                \
 115 },
 116
 117 #define MUX_CFG_24XX(desc, reg_offset, mode,                    \
 118                                 pull_en, pull_mode, dbg)        \
 119 {                                                               \
 120         .name           = desc,                                 \
 121         .debug          = dbg,                                  \
 122         .mux_reg        = reg_offset,                           \
 123         .mask           = mode,                                 \
 124         .pull_val       = pull_en,                              \
 125         .pu_pd_val      = pull_mode,                            \
 126 },
 127
 128 /* 24xx/34xx mux bit defines */
 129 #define OMAP2_PULL_ENA          (1 << 3)
 130 #define OMAP2_PULL_UP           (1 << 4)
 131 #define OMAP2_ALTELECTRICALSEL  (1 << 5)
 132
 133 /* 34xx specific mux bit defines */
 134 #define OMAP3_INPUT_EN          (1 << 8)
 135 #define OMAP3_OFF_EN            (1 << 9)
 136 #define OMAP3_OFFOUT_EN         (1 << 10)
 137 #define OMAP3_OFFOUT_VAL        (1 << 11)
 138 #define OMAP3_OFF_PULL_EN       (1 << 12)
 139 #define OMAP3_OFF_PULL_UP       (1 << 13)
 140 #define OMAP3_WAKEUP_EN         (1 << 14)
 141
 142 /* 34xx mux mode options for each pin. See TRM for options */
 143 #define OMAP34XX_MUX_MODE0      0
 144 #define OMAP34XX_MUX_MODE1      1
 145 #define OMAP34XX_MUX_MODE2      2
 146 #define OMAP34XX_MUX_MODE3      3
 147 #define OMAP34XX_MUX_MODE4      4
 148 #define OMAP34XX_MUX_MODE5      5
 149 #define OMAP34XX_MUX_MODE6      6
 150 #define OMAP34XX_MUX_MODE7      7
 151
 152 /* 34xx active pin states */
 153 #define OMAP34XX_PIN_OUTPUT             0
 154 #define OMAP34XX_PIN_INPUT              OMAP3_INPUT_EN
 155 #define OMAP34XX_PIN_INPUT_PULLUP       (OMAP2_PULL_ENA | OMAP3_INPUT_EN \
 156                                                 | OMAP2_PULL_UP)
 157 #define OMAP34XX_PIN_INPUT_PULLDOWN     (OMAP2_PULL_ENA | OMAP3_INPUT_EN)
 158
 159 /* 34xx off mode states */
 160 #define OMAP34XX_PIN_OFF_NONE           0
 161 #define OMAP34XX_PIN_OFF_OUTPUT_HIGH    (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
 162                                                 | OMAP3_OFFOUT_VAL)
 163 #define OMAP34XX_PIN_OFF_OUTPUT_LOW     (OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
 164 #define OMAP34XX_PIN_OFF_INPUT_PULLUP   (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
 165                                                 | OMAP3_OFF_PULL_UP)
 166 #define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
 167 #define OMAP34XX_PIN_OFF_WAKEUPENABLE   OMAP3_WAKEUP_EN
 168
 169 #define MUX_CFG_34XX(desc, reg_offset, mux_value) {             \
 170         .name           = desc,                                 \
 171         .debug          = 0,                                    \
 172         .mux_reg        = reg_offset,                           \
 173         .mux_val        = mux_value                             \
 174 },
 175
 176 struct pin_config {
 177         char                    *name;
 178         const unsigned int      mux_reg;
 179         unsigned char           debug;
 180
 181 #if     defined(CONFIG_ARCH_OMAP34XX)
 182         u16                     mux_val; /* Wake-up, off mode, pull, mux mode */
 183 #endif
 184
 185 #if     defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
 186         const unsigned char mask_offset;
 187         const unsigned char mask;
 188
 189         const char *pull_name;
 190         const unsigned int pull_reg;
 191         const unsigned char pull_val;
 192         const unsigned char pull_bit;
 193
 194         const char *pu_pd_name;
 195         const unsigned int pu_pd_reg;
 196         const unsigned char pu_pd_val;
 197 #endif
 198
 199 #if     defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
 200         const char *mux_reg_name;
 201 #endif
 202
 203 };
 204
 205 enum omap730_index {
 206         /* OMAP 730 keyboard */
 207         E2_730_KBR0,
 208         J7_730_KBR1,
 209         E1_730_KBR2,
 210         F3_730_KBR3,
 211         D2_730_KBR4,
 212         C2_730_KBC0,
 213         D3_730_KBC1,
 214         E4_730_KBC2,
 215         F4_730_KBC3,
 216         E3_730_KBC4,
 217
 218         /* USB */
 219         AA17_730_USB_DM,
 220         W16_730_USB_PU_EN,
 221         W17_730_USB_VBUSI,
 222 };
 223
 224 enum omap1xxx_index {
 225         /* UART1 (BT_UART_GATING)*/
 226         UART1_TX = 0,
 227         UART1_RTS,
 228
 229         /* UART2 (COM_UART_GATING)*/
 230         UART2_TX,
 231         UART2_RX,
 232         UART2_CTS,
 233         UART2_RTS,
 234
 235         /* UART3 (GIGA_UART_GATING) */
 236         UART3_TX,
 237         UART3_RX,
 238         UART3_CTS,
 239         UART3_RTS,
 240         UART3_CLKREQ,
 241         UART3_BCLK,     /* 12MHz clock out */
 242         Y15_1610_UART3_RTS,
 243
 244         /* PWT & PWL */
 245         PWT,
 246         PWL,
 247
 248         /* USB master generic */
 249         R18_USB_VBUS,
 250         R18_1510_USB_GPIO0,
 251         W4_USB_PUEN,
 252         W4_USB_CLKO,
 253         W4_USB_HIGHZ,
 254         W4_GPIO58,
 255
 256         /* USB1 master */
 257         USB1_SUSP,
 258         USB1_SEO,
 259         W13_1610_USB1_SE0,
 260         USB1_TXEN,
 261         USB1_TXD,
 262         USB1_VP,
 263         USB1_VM,
 264         USB1_RCV,
 265         USB1_SPEED,
 266         R13_1610_USB1_SPEED,
 267         R13_1710_USB1_SE0,
 268
 269         /* USB2 master */
 270         USB2_SUSP,
 271         USB2_VP,
 272         USB2_TXEN,
 273         USB2_VM,
 274         USB2_RCV,
 275         USB2_SEO,
 276         USB2_TXD,
 277
 278         /* OMAP-1510 GPIO */
 279         R18_1510_GPIO0,
 280         R19_1510_GPIO1,
 281         M14_1510_GPIO2,
 282
 283         /* OMAP1610 GPIO */
 284         P18_1610_GPIO3,
 285         Y15_1610_GPIO17,
 286
 287         /* OMAP-1710 GPIO */
 288         R18_1710_GPIO0,
 289         V2_1710_GPIO10,
 290         N21_1710_GPIO14,
 291         W15_1710_GPIO40,
 292
 293         /* MPUIO */
 294         MPUIO2,
 295         N15_1610_MPUIO2,
 296         MPUIO4,
 297         MPUIO5,
 298         T20_1610_MPUIO5,
 299         W11_1610_MPUIO6,
 300         V10_1610_MPUIO7,
 301         W11_1610_MPUIO9,
 302         V10_1610_MPUIO10,
 303         W10_1610_MPUIO11,
 304         E20_1610_MPUIO13,
 305         U20_1610_MPUIO14,
 306         E19_1610_MPUIO15,
 307
 308         /* MCBSP2 */
 309         MCBSP2_CLKR,
 310         MCBSP2_CLKX,
 311         MCBSP2_DR,
 312         MCBSP2_DX,
 313         MCBSP2_FSR,
 314         MCBSP2_FSX,
 315
 316         /* MCBSP3 */
 317         MCBSP3_CLKX,
 318
 319         /* Misc ballouts */
 320         BALLOUT_V8_ARMIO3,
 321         N20_HDQ,
 322
 323         /* OMAP-1610 MMC2 */
 324         W8_1610_MMC2_DAT0,
 325         V8_1610_MMC2_DAT1,
 326         W15_1610_MMC2_DAT2,
 327         R10_1610_MMC2_DAT3,
 328         Y10_1610_MMC2_CLK,
 329         Y8_1610_MMC2_CMD,
 330         V9_1610_MMC2_CMDDIR,
 331         V5_1610_MMC2_DATDIR0,
 332         W19_1610_MMC2_DATDIR1,
 333         R18_1610_MMC2_CLKIN,
 334
 335         /* OMAP-1610 External Trace Interface */
 336         M19_1610_ETM_PSTAT0,
 337         L15_1610_ETM_PSTAT1,
 338         L18_1610_ETM_PSTAT2,
 339         L19_1610_ETM_D0,
 340         J19_1610_ETM_D6,
 341         J18_1610_ETM_D7,
 342
 343         /* OMAP16XX GPIO */
 344         P20_1610_GPIO4,
 345         V9_1610_GPIO7,
 346         W8_1610_GPIO9,
 347         N20_1610_GPIO11,
 348         N19_1610_GPIO13,
 349         P10_1610_GPIO22,
 350         V5_1610_GPIO24,
 351         AA20_1610_GPIO_41,
 352         W19_1610_GPIO48,
 353         M7_1610_GPIO62,
 354         V14_16XX_GPIO37,
 355         R9_16XX_GPIO18,
 356         L14_16XX_GPIO49,
 357
 358         /* OMAP-1610 uWire */
 359         V19_1610_UWIRE_SCLK,
 360         U18_1610_UWIRE_SDI,
 361         W21_1610_UWIRE_SDO,
 362         N14_1610_UWIRE_CS0,
 363         P15_1610_UWIRE_CS3,
 364         N15_1610_UWIRE_CS1,
 365
 366         /* OMAP-1610 SPI */
 367         U19_1610_SPIF_SCK,
 368         U18_1610_SPIF_DIN,
 369         P20_1610_SPIF_DIN,
 370         W21_1610_SPIF_DOUT,
 371         R18_1610_SPIF_DOUT,
 372         N14_1610_SPIF_CS0,
 373         N15_1610_SPIF_CS1,
 374         T19_1610_SPIF_CS2,
 375         P15_1610_SPIF_CS3,
 376
 377         /* OMAP-1610 Flash */
 378         L3_1610_FLASH_CS2B_OE,
 379         M8_1610_FLASH_CS2B_WE,
 380
 381         /* First MMC */
 382         MMC_CMD,
 383         MMC_DAT1,
 384         MMC_DAT2,
 385         MMC_DAT0,
 386         MMC_CLK,
 387         MMC_DAT3,
 388
 389         /* OMAP-1710 MMC CMDDIR and DATDIR0 */
 390         M15_1710_MMC_CLKI,
 391         P19_1710_MMC_CMDDIR,
 392         P20_1710_MMC_DATDIR0,
 393
 394         /* OMAP-1610 USB0 alternate pin configuration */
 395         W9_USB0_TXEN,
 396         AA9_USB0_VP,
 397         Y5_USB0_RCV,
 398         R9_USB0_VM,
 399         V6_USB0_TXD,
 400         W5_USB0_SE0,
 401         V9_USB0_SPEED,
 402         V9_USB0_SUSP,
 403
 404         /* USB2 */
 405         W9_USB2_TXEN,
 406         AA9_USB2_VP,
 407         Y5_USB2_RCV,
 408         R9_USB2_VM,
 409         V6_USB2_TXD,
 410         W5_USB2_SE0,
 411
 412         /* 16XX UART */
 413         R13_1610_UART1_TX,
 414         V14_16XX_UART1_RX,
 415         R14_1610_UART1_CTS,
 416         AA15_1610_UART1_RTS,
 417         R9_16XX_UART2_RX,
 418         L14_16XX_UART3_RX,
 419
 420         /* I2C OMAP-1610 */
 421         I2C_SCL,
 422         I2C_SDA,
 423
 424         /* Keypad */
 425         F18_1610_KBC0,
 426         D20_1610_KBC1,
 427         D19_1610_KBC2,
 428         E18_1610_KBC3,
 429         C21_1610_KBC4,
 430         G18_1610_KBR0,
 431         F19_1610_KBR1,
 432         H14_1610_KBR2,
 433         E20_1610_KBR3,
 434         E19_1610_KBR4,
 435         N19_1610_KBR5,
 436
 437         /* Power management */
 438         T20_1610_LOW_PWR,
 439
 440         /* MCLK Settings */
 441         V5_1710_MCLK_ON,
 442         V5_1710_MCLK_OFF,
 443         R10_1610_MCLK_ON,
 444         R10_1610_MCLK_OFF,
 445
 446         /* CompactFlash controller */
 447         P11_1610_CF_CD2,
 448         R11_1610_CF_IOIS16,
 449         V10_1610_CF_IREQ,
 450         W10_1610_CF_RESET,
 451         W11_1610_CF_CD1,
 452
 453         /* parallel camera */
 454         J15_1610_CAM_LCLK,
 455         J18_1610_CAM_D7,
 456         J19_1610_CAM_D6,
 457         J14_1610_CAM_D5,
 458         K18_1610_CAM_D4,
 459         K19_1610_CAM_D3,
 460         K15_1610_CAM_D2,
 461         K14_1610_CAM_D1,
 462         L19_1610_CAM_D0,
 463         L18_1610_CAM_VS,
 464         L15_1610_CAM_HS,
 465         M19_1610_CAM_RSTZ,
 466         Y15_1610_CAM_OUTCLK,
 467
 468         /* serial camera */
 469         H19_1610_CAM_EXCLK,
 470         Y12_1610_CCP_CLKP,
 471         W13_1610_CCP_CLKM,
 472         W14_1610_CCP_DATAP,
 473         Y14_1610_CCP_DATAM,
 474
 475 };
 476
 477 enum omap24xx_index {
 478         /* 24xx I2C */
 479         M19_24XX_I2C1_SCL,
 480         L15_24XX_I2C1_SDA,
 481         J15_24XX_I2C2_SCL,
 482         H19_24XX_I2C2_SDA,
 483
 484         /* 24xx Menelaus interrupt */
 485         W19_24XX_SYS_NIRQ,
 486
 487         /* 24xx clock */
 488         W14_24XX_SYS_CLKOUT,
 489
 490         /* 24xx GPMC chipselects, wait pin monitoring */
 491         E2_GPMC_NCS2,
 492         L2_GPMC_NCS7,
 493         L3_GPMC_WAIT0,
 494         N7_GPMC_WAIT1,
 495         M1_GPMC_WAIT2,
 496         P1_GPMC_WAIT3,
 497
 498         /* 242X McBSP */
 499         Y15_24XX_MCBSP2_CLKX,
 500         R14_24XX_MCBSP2_FSX,
 501         W15_24XX_MCBSP2_DR,
 502         V15_24XX_MCBSP2_DX,
 503
 504         /* 24xx GPIO */
 505         M21_242X_GPIO11,
 506         P21_242X_GPIO12,
 507         AA10_242X_GPIO13,
 508         AA6_242X_GPIO14,
 509         AA4_242X_GPIO15,
 510         Y11_242X_GPIO16,
 511         AA12_242X_GPIO17,
 512         AA8_242X_GPIO58,
 513         Y20_24XX_GPIO60,
 514         W4__24XX_GPIO74,
 515         N15_24XX_GPIO85,
 516         M15_24XX_GPIO92,
 517         P20_24XX_GPIO93,
 518         P18_24XX_GPIO95,
 519         M18_24XX_GPIO96,
 520         L14_24XX_GPIO97,
 521         J15_24XX_GPIO99,
 522         V14_24XX_GPIO117,
 523         P14_24XX_GPIO125,
 524
 525         /* 242x DBG GPIO */
 526         V4_242X_GPIO49,
 527         W2_242X_GPIO50,
 528         U4_242X_GPIO51,
 529         V3_242X_GPIO52,
 530         V2_242X_GPIO53,
 531         V6_242X_GPIO53,
 532         T4_242X_GPIO54,
 533         Y4_242X_GPIO54,
 534         T3_242X_GPIO55,
 535         U2_242X_GPIO56,
 536
 537         /* 24xx external DMA requests */
 538         AA10_242X_DMAREQ0,
 539         AA6_242X_DMAREQ1,
 540         E4_242X_DMAREQ2,
 541         G4_242X_DMAREQ3,
 542         D3_242X_DMAREQ4,
 543         E3_242X_DMAREQ5,
 544
 545         /* UART3 */
 546         K15_24XX_UART3_TX,
 547         K14_24XX_UART3_RX,
 548
 549         /* MMC/SDIO */
 550         G19_24XX_MMC_CLKO,
 551         H18_24XX_MMC_CMD,
 552         F20_24XX_MMC_DAT0,
 553         H14_24XX_MMC_DAT1,
 554         E19_24XX_MMC_DAT2,
 555         D19_24XX_MMC_DAT3,
 556         F19_24XX_MMC_DAT_DIR0,
 557         E20_24XX_MMC_DAT_DIR1,
 558         F18_24XX_MMC_DAT_DIR2,
 559         E18_24XX_MMC_DAT_DIR3,
 560         G18_24XX_MMC_CMD_DIR,
 561         H15_24XX_MMC_CLKI,
 562
 563         /* Full speed USB */
 564         J20_24XX_USB0_PUEN,
 565         J19_24XX_USB0_VP,
 566         K20_24XX_USB0_VM,
 567         J18_24XX_USB0_RCV,
 568         K19_24XX_USB0_TXEN,
 569         J14_24XX_USB0_SE0,
 570         K18_24XX_USB0_DAT,
 571
 572         N14_24XX_USB1_SE0,
 573         W12_24XX_USB1_SE0,
 574         P15_24XX_USB1_DAT,
 575         R13_24XX_USB1_DAT,
 576         W20_24XX_USB1_TXEN,
 577         P13_24XX_USB1_TXEN,
 578         V19_24XX_USB1_RCV,
 579         V12_24XX_USB1_RCV,
 580
 581         AA10_24XX_USB2_SE0,
 582         Y11_24XX_USB2_DAT,
 583         AA12_24XX_USB2_TXEN,
 584         AA6_24XX_USB2_RCV,
 585         AA4_24XX_USB2_TLLSE0,
 586
 587         /* Keypad GPIO*/
 588         T19_24XX_KBR0,
 589         R19_24XX_KBR1,
 590         V18_24XX_KBR2,
 591         M21_24XX_KBR3,
 592         E5__24XX_KBR4,
 593         M18_24XX_KBR5,
 594         R20_24XX_KBC0,
 595         M14_24XX_KBC1,
 596         H19_24XX_KBC2,
 597         V17_24XX_KBC3,
 598         P21_24XX_KBC4,
 599         L14_24XX_KBC5,
 600         N19_24XX_KBC6,
 601
 602         /* 24xx Menelaus Keypad GPIO */
 603         B3__24XX_KBR5,
 604         AA4_24XX_KBC2,
 605         B13_24XX_KBC6,
 606
 607         /* 2430 USB */
 608         AD9_2430_USB0_PUEN,
 609         Y11_2430_USB0_VP,
 610         AD7_2430_USB0_VM,
 611         AE7_2430_USB0_RCV,
 612         AD4_2430_USB0_TXEN,
 613         AF9_2430_USB0_SE0,
 614         AE6_2430_USB0_DAT,
 615         AD24_2430_USB1_SE0,
 616         AB24_2430_USB1_RCV,
 617         Y25_2430_USB1_TXEN,
 618         AA26_2430_USB1_DAT,
 619
 620         /* 2430 HS-USB */
 621         AD9_2430_USB0HS_DATA3,
 622         Y11_2430_USB0HS_DATA4,
 623         AD7_2430_USB0HS_DATA5,
 624         AE7_2430_USB0HS_DATA6,
 625         AD4_2430_USB0HS_DATA2,
 626         AF9_2430_USB0HS_DATA0,
 627         AE6_2430_USB0HS_DATA1,
 628         AE8_2430_USB0HS_CLK,
 629         AD8_2430_USB0HS_DIR,
 630         AE5_2430_USB0HS_STP,
 631         AE9_2430_USB0HS_NXT,
 632         AC7_2430_USB0HS_DATA7,
 633
 634         /* 2430 McBSP */
 635         AD6_2430_MCBSP_CLKS,
 636
 637         AB2_2430_MCBSP1_CLKR,
 638         AD5_2430_MCBSP1_FSR,
 639         AA1_2430_MCBSP1_DX,
 640         AF3_2430_MCBSP1_DR,
 641         AB3_2430_MCBSP1_FSX,
 642         Y9_2430_MCBSP1_CLKX,
 643
 644         AC10_2430_MCBSP2_FSX,
 645         AD16_2430_MCBSP2_CLX,
 646         AE13_2430_MCBSP2_DX,
 647         AD13_2430_MCBSP2_DR,
 648         AC10_2430_MCBSP2_FSX_OFF,
 649         AD16_2430_MCBSP2_CLX_OFF,
 650         AE13_2430_MCBSP2_DX_OFF,
 651         AD13_2430_MCBSP2_DR_OFF,
 652
 653         AC9_2430_MCBSP3_CLKX,
 654         AE4_2430_MCBSP3_FSX,
 655         AE2_2430_MCBSP3_DR,
 656         AF4_2430_MCBSP3_DX,
 657
 658         N3_2430_MCBSP4_CLKX,
 659         AD23_2430_MCBSP4_DR,
 660         AB25_2430_MCBSP4_DX,
 661         AC25_2430_MCBSP4_FSX,
 662
 663         AE16_2430_MCBSP5_CLKX,
 664         AF12_2430_MCBSP5_FSX,
 665         K7_2430_MCBSP5_DX,
 666         M1_2430_MCBSP5_DR,
 667
 668         /* 2430 McSPI*/
 669         Y18_2430_MCSPI1_CLK,
 670         AD15_2430_MCSPI1_SIMO,
 671         AE17_2430_MCSPI1_SOMI,
 672         U1_2430_MCSPI1_CS0,
 673
 674         /* Touchscreen GPIO */
 675         AF19_2430_GPIO_85,
 676
 677 };
 678
 679 enum omap34xx_index {
 680         /* 34xx I2C */
 681         K21_34XX_I2C1_SCL,
 682         J21_34XX_I2C1_SDA,
 683         AF15_34XX_I2C2_SCL,
 684         AE15_34XX_I2C2_SDA,
 685         AF14_34XX_I2C3_SCL,
 686         AG14_34XX_I2C3_SDA,
 687         AD26_34XX_I2C4_SCL,
 688         AE26_34XX_I2C4_SDA,
 689
 690         /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
 691         Y8_3430_USB1HS_PHY_CLK,
 692         Y9_3430_USB1HS_PHY_STP,
 693         AA14_3430_USB1HS_PHY_DIR,
 694         AA11_3430_USB1HS_PHY_NXT,
 695         W13_3430_USB1HS_PHY_DATA0,
 696         W12_3430_USB1HS_PHY_DATA1,
 697         W11_3430_USB1HS_PHY_DATA2,
 698         Y11_3430_USB1HS_PHY_DATA3,
 699         W9_3430_USB1HS_PHY_DATA4,
 700         Y12_3430_USB1HS_PHY_DATA5,
 701         W8_3430_USB1HS_PHY_DATA6,
 702         Y13_3430_USB1HS_PHY_DATA7,
 703
 704         /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
 705         AA8_3430_USB2HS_PHY_CLK,
 706         AA10_3430_USB2HS_PHY_STP,
 707         AA9_3430_USB2HS_PHY_DIR,
 708         AB11_3430_USB2HS_PHY_NXT,
 709         AB10_3430_USB2HS_PHY_DATA0,
 710         AB9_3430_USB2HS_PHY_DATA1,
 711         W3_3430_USB2HS_PHY_DATA2,
 712         T4_3430_USB2HS_PHY_DATA3,
 713         T3_3430_USB2HS_PHY_DATA4,
 714         R3_3430_USB2HS_PHY_DATA5,
 715         R4_3430_USB2HS_PHY_DATA6,
 716         T2_3430_USB2HS_PHY_DATA7,
 717
 718
 719         /* TLL - HSUSB: 12-pin TLL Port 1*/
 720         Y8_3430_USB1HS_TLL_CLK,
 721         Y9_3430_USB1HS_TLL_STP,
 722         AA14_3430_USB1HS_TLL_DIR,
 723         AA11_3430_USB1HS_TLL_NXT,
 724         W13_3430_USB1HS_TLL_DATA0,
 725         W12_3430_USB1HS_TLL_DATA1,
 726         W11_3430_USB1HS_TLL_DATA2,
 727         Y11_3430_USB1HS_TLL_DATA3,
 728         W9_3430_USB1HS_TLL_DATA4,
 729         Y12_3430_USB1HS_TLL_DATA5,
 730         W8_3430_USB1HS_TLL_DATA6,
 731         Y13_3430_USB1HS_TLL_DATA7,
 732
 733         /* TLL - HSUSB: 12-pin TLL Port 2*/
 734         AA8_3430_USB2HS_TLL_CLK,
 735         AA10_3430_USB2HS_TLL_STP,
 736         AA9_3430_USB2HS_TLL_DIR,
 737         AB11_3430_USB2HS_TLL_NXT,
 738         AB10_3430_USB2HS_TLL_DATA0,
 739         AB9_3430_USB2HS_TLL_DATA1,
 740         W3_3430_USB2HS_TLL_DATA2,
 741         T4_3430_USB2HS_TLL_DATA3,
 742         T3_3430_USB2HS_TLL_DATA4,
 743         R3_3430_USB2HS_TLL_DATA5,
 744         R4_3430_USB2HS_TLL_DATA6,
 745         T2_3430_USB2HS_TLL_DATA7,
 746
 747         /* TLL - HSUSB: 12-pin TLL Port 3*/
 748         AA6_3430_USB3HS_TLL_CLK,
 749         AB3_3430_USB3HS_TLL_STP,
 750         AA3_3430_USB3HS_TLL_DIR,
 751         Y3_3430_USB3HS_TLL_NXT,
 752         AA5_3430_USB3HS_TLL_DATA0,
 753         Y4_3430_USB3HS_TLL_DATA1,
 754         Y5_3430_USB3HS_TLL_DATA2,
 755         W5_3430_USB3HS_TLL_DATA3,
 756         AB12_3430_USB3HS_TLL_DATA4,
 757         AB13_3430_USB3HS_TLL_DATA5,
 758         AA13_3430_USB3HS_TLL_DATA6,
 759         AA12_3430_USB3HS_TLL_DATA7,
 760
 761         /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
 762         AF10_3430_USB1FS_PHY_MM1_RXDP,
 763         AG9_3430_USB1FS_PHY_MM1_RXDM,
 764         W13_3430_USB1FS_PHY_MM1_RXRCV,
 765         W12_3430_USB1FS_PHY_MM1_TXSE0,
 766         W11_3430_USB1FS_PHY_MM1_TXDAT,
 767         Y11_3430_USB1FS_PHY_MM1_TXEN_N,
 768
 769         /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
 770         AF7_3430_USB2FS_PHY_MM2_RXDP,
 771         AH7_3430_USB2FS_PHY_MM2_RXDM,
 772         AB10_3430_USB2FS_PHY_MM2_RXRCV,
 773         AB9_3430_USB2FS_PHY_MM2_TXSE0,
 774         W3_3430_USB2FS_PHY_MM2_TXDAT,
 775         T4_3430_USB2FS_PHY_MM2_TXEN_N,
 776
 777         /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
 778         AH3_3430_USB3FS_PHY_MM3_RXDP,
 779         AE3_3430_USB3FS_PHY_MM3_RXDM,
 780         AD1_3430_USB3FS_PHY_MM3_RXRCV,
 781         AE1_3430_USB3FS_PHY_MM3_TXSE0,
 782         AD2_3430_USB3FS_PHY_MM3_TXDAT,
 783         AC1_3430_USB3FS_PHY_MM3_TXEN_N,
 784
 785         /* 34xx GPIO
 786          *  - normally these are bidirectional, no internal pullup/pulldown
 787          *  - "_UP" suffix (GPIO3_UP) if internal pullup is configured
 788          *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
 789          *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
 790          */
 791         AH8_34XX_GPIO29,
 792         J25_34XX_GPIO170,
 793 };
 794
 795 struct omap_mux_cfg {
 796         struct pin_config       *pins;
 797         unsigned long           size;
 798         int                     (*cfg_reg)(const struct pin_config *cfg);
 799 };
 800
 801 #ifdef  CONFIG_OMAP_MUX
 802 /* setup pin muxing in Linux */
 803 extern int omap1_mux_init(void);
 804 extern int omap2_mux_init(void);
 805 extern int omap_mux_register(struct omap_mux_cfg *);
 806 extern int omap_cfg_reg(unsigned long reg_cfg);
 807 #else
 808 /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
 809 static inline int omap1_mux_init(void) { return 0; }
 810 static inline int omap2_mux_init(void) { return 0; }
 811 static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
 812 #endif
 813
 814 #endif