]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - arch/arm/mach-omap2/clock.c
5170481afeab935764226735f6958204ffa5894e
[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap2 / clock.c
1 /*
2  *  linux/arch/arm/mach-omap2/clock.c
3  *
4  *  Copyright (C) 2005 Texas Instruments Inc.
5  *  Richard Woodruff <r-woodruff2@ti.com>
6  *  Created for OMAP2.
7  *
8  *  Cleaned up and modified to use omap shared clock framework by
9  *  Tony Lindgren <tony@atomide.com>
10  *
11  *  Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation
12  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
13  *
14  * This program is free software; you can redistribute it and/or modify
15  * it under the terms of the GNU General Public License version 2 as
16  * published by the Free Software Foundation.
17  */
18 #include <linux/module.h>
19 #include <linux/kernel.h>
20 #include <linux/device.h>
21 #include <linux/list.h>
22 #include <linux/errno.h>
23 #include <linux/delay.h>
24 #include <linux/clk.h>
25
26 #include <asm/io.h>
27
28 #include <asm/arch/clock.h>
29 #include <asm/arch/sram.h>
30 #include <asm/div64.h>
31
32 #include "prcm-regs.h"
33 #include "memory.h"
34 #include "clock.h"
35
36 #undef DEBUG
37
38 //#define DOWN_VARIABLE_DPLL 1                  /* Experimental */
39
40 static struct prcm_config *curr_prcm_set;
41 static u32 curr_perf_level = PRCM_FULL_SPEED;
42 static struct clk *vclk;
43 static struct clk *sclk;
44
45 /*-------------------------------------------------------------------------
46  * Omap2 specific clock functions
47  *-------------------------------------------------------------------------*/
48
49 /* Recalculate SYST_CLK */
50 static void omap2_sys_clk_recalc(struct clk * clk)
51 {
52         u32 div = PRCM_CLKSRC_CTRL;
53         div &= (1 << 7) | (1 << 6);     /* Test if ext clk divided by 1 or 2 */
54         div >>= clk->rate_offset;
55         clk->rate = (clk->parent->rate / div);
56         propagate_rate(clk);
57 }
58
59 static u32 omap2_get_dpll_rate(struct clk * tclk)
60 {
61         long long dpll_clk;
62         int dpll_mult, dpll_div, amult;
63
64         dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff;    /* 10 bits */
65         dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f;        /* 4 bits */
66         dpll_clk = (long long)tclk->parent->rate * dpll_mult;
67         do_div(dpll_clk, dpll_div + 1);
68         amult = CM_CLKSEL2_PLL & 0x3;
69         dpll_clk *= amult;
70
71         return dpll_clk;
72 }
73
74 static void omap2_followparent_recalc(struct clk *clk)
75 {
76         followparent_recalc(clk);
77 }
78
79 static void omap2_propagate_rate(struct clk * clk)
80 {
81         if (!(clk->flags & RATE_FIXED))
82                 clk->rate = clk->parent->rate;
83
84         propagate_rate(clk);
85 }
86
87 static void omap2_set_osc_ck(int enable)
88 {
89         if (enable)
90                 PRCM_CLKSRC_CTRL &= ~(0x3 << 3);
91         else
92                 PRCM_CLKSRC_CTRL |= 0x3 << 3;
93 }
94
95 /* Enable an APLL if off */
96 static void omap2_clk_fixed_enable(struct clk *clk)
97 {
98         u32 cval, i=0;
99
100         if (clk->enable_bit == 0xff)                    /* Parent will do it */
101                 return;
102
103         cval = CM_CLKEN_PLL;
104
105         if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit))
106                 return;
107
108         cval &= ~(0x3 << clk->enable_bit);
109         cval |= (0x3 << clk->enable_bit);
110         CM_CLKEN_PLL = cval;
111
112         if (clk == &apll96_ck)
113                 cval = (1 << 8);
114         else if (clk == &apll54_ck)
115                 cval = (1 << 6);
116
117         while (!(CM_IDLEST_CKGEN & cval)) {             /* Wait for lock */
118                 ++i;
119                 udelay(1);
120                 if (i == 100000) {
121                         printk(KERN_ERR "Clock %s didn't lock\n", clk->name);
122                         break;
123                 }
124         }
125 }
126
127 static void omap2_clk_wait_ready(struct clk *clk)
128 {
129         unsigned long reg, other_reg, st_reg;
130         u32 bit;
131         int i;
132
133         reg = (unsigned long) clk->enable_reg;
134         if (reg == (unsigned long) &CM_FCLKEN1_CORE ||
135             reg == (unsigned long) &CM_FCLKEN2_CORE)
136                 other_reg = (reg & ~0xf0) | 0x10;
137         else if (reg == (unsigned long) &CM_ICLKEN1_CORE ||
138                  reg == (unsigned long) &CM_ICLKEN2_CORE)
139                 other_reg = (reg & ~0xf0) | 0x00;
140         else
141                 return;
142
143         /* No check for DSS or cam clocks */
144         if ((reg & 0x0f) == 0) {
145                 if (clk->enable_bit <= 1 || clk->enable_bit == 31)
146                         return;
147         }
148
149         /* Check if both functional and interface clocks
150          * are running. */
151         bit = 1 << clk->enable_bit;
152         if (!(__raw_readl(other_reg) & bit))
153                 return;
154         st_reg = (other_reg & ~0xf0) | 0x20;
155         i = 0;
156         while (!(__raw_readl(st_reg) & bit)) {
157                 i++;
158                 if (i == 100000) {
159                         printk(KERN_ERR "Timeout enabling clock %s\n", clk->name);
160                         break;
161                 }
162         }
163         if (i)
164                 pr_debug("Clock %s stable after %d loops\n", clk->name, i);
165 }
166
167 /* Enables clock without considering parent dependencies or use count
168  * REVISIT: Maybe change this to use clk->enable like on omap1?
169  */
170 static int _omap2_clk_enable(struct clk * clk)
171 {
172         u32 regval32;
173
174         if (clk->flags & ALWAYS_ENABLED)
175                 return 0;
176
177         if (unlikely(clk == &osc_ck)) {
178                 omap2_set_osc_ck(1);
179                 return 0;
180         }
181
182         if (unlikely(clk->enable_reg == 0)) {
183                 printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
184                        clk->name);
185                 return 0;
186         }
187
188         if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
189                 omap2_clk_fixed_enable(clk);
190                 return 0;
191         }
192
193         regval32 = __raw_readl(clk->enable_reg);
194         regval32 |= (1 << clk->enable_bit);
195         __raw_writel(regval32, clk->enable_reg);
196         wmb();
197
198         omap2_clk_wait_ready(clk);
199
200         return 0;
201 }
202
203 /* Stop APLL */
204 static void omap2_clk_fixed_disable(struct clk *clk)
205 {
206         u32 cval;
207
208         if(clk->enable_bit == 0xff)             /* let parent off do it */
209                 return;
210
211         cval = CM_CLKEN_PLL;
212         cval &= ~(0x3 << clk->enable_bit);
213         CM_CLKEN_PLL = cval;
214 }
215
216 /* Disables clock without considering parent dependencies or use count */
217 static void _omap2_clk_disable(struct clk *clk)
218 {
219         u32 regval32;
220
221         if (unlikely(clk == &osc_ck)) {
222                 omap2_set_osc_ck(0);
223                 return;
224         }
225
226         if (clk->enable_reg == 0)
227                 return;
228
229         if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
230                 omap2_clk_fixed_disable(clk);
231                 return;
232         }
233
234         regval32 = __raw_readl(clk->enable_reg);
235         regval32 &= ~(1 << clk->enable_bit);
236         __raw_writel(regval32, clk->enable_reg);
237         wmb();
238 }
239
240 static int omap2_clk_enable(struct clk *clk)
241 {
242         int ret = 0;
243
244         if (clk->usecount++ == 0) {
245                 if (likely((u32)clk->parent))
246                         ret = omap2_clk_enable(clk->parent);
247
248                 if (unlikely(ret != 0)) {
249                         clk->usecount--;
250                         return ret;
251                 }
252
253                 ret = _omap2_clk_enable(clk);
254
255                 if (unlikely(ret != 0) && clk->parent) {
256                         omap2_clk_disable(clk->parent);
257                         clk->usecount--;
258                 }
259         }
260
261         return ret;
262 }
263
264 static void omap2_clk_disable(struct clk *clk)
265 {
266         if (clk->usecount > 0 && !(--clk->usecount)) {
267                 _omap2_clk_disable(clk);
268                 if (likely((u32)clk->parent))
269                         omap2_clk_disable(clk->parent);
270         }
271 }
272
273 /*
274  * Uses the current prcm set to tell if a rate is valid.
275  * You can go slower, but not faster within a given rate set.
276  */
277 static u32 omap2_dpll_round_rate(unsigned long target_rate)
278 {
279         u32 high, low;
280
281         if ((CM_CLKSEL2_PLL & 0x3) == 1) {      /* DPLL clockout */
282                 high = curr_prcm_set->dpll_speed * 2;
283                 low = curr_prcm_set->dpll_speed;
284         } else {                                /* DPLL clockout x 2 */
285                 high = curr_prcm_set->dpll_speed;
286                 low = curr_prcm_set->dpll_speed / 2;
287         }
288
289 #ifdef DOWN_VARIABLE_DPLL
290         if (target_rate > high)
291                 return high;
292         else
293                 return target_rate;
294 #else
295         if (target_rate > low)
296                 return high;
297         else
298                 return low;
299 #endif
300
301 }
302
303 /*
304  * Used for clocks that are part of CLKSEL_xyz governed clocks.
305  * REVISIT: Maybe change to use clk->enable() functions like on omap1?
306  */
307 static void omap2_clksel_recalc(struct clk * clk)
308 {
309         u32 fixed = 0, div = 0;
310
311         if (clk == &dpll_ck) {
312                 clk->rate = omap2_get_dpll_rate(clk);
313                 fixed = 1;
314                 div = 0;
315         }
316
317         if (clk == &iva1_mpu_int_ifck) {
318                 div = 2;
319                 fixed = 1;
320         }
321
322         if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) {
323                 clk->rate = sys_ck.rate;
324                 return;
325         }
326
327         if (!fixed) {
328                 div = omap2_clksel_get_divisor(clk);
329                 if (div == 0)
330                         return;
331         }
332
333         if (div != 0) {
334                 if (unlikely(clk->rate == clk->parent->rate / div))
335                         return;
336                 clk->rate = clk->parent->rate / div;
337         }
338
339         if (unlikely(clk->flags & RATE_PROPAGATES))
340                 propagate_rate(clk);
341 }
342
343 /*
344  * Finds best divider value in an array based on the source and target
345  * rates. The divider array must be sorted with smallest divider first.
346  */
347 static inline u32 omap2_divider_from_table(u32 size, u32 *div_array,
348                                            u32 src_rate, u32 tgt_rate)
349 {
350         int i, test_rate;
351
352         if (div_array == NULL)
353                 return ~1;
354
355         for (i=0; i < size; i++) {
356                 test_rate = src_rate / *div_array;
357                 if (test_rate <= tgt_rate)
358                         return *div_array;
359                 ++div_array;
360         }
361
362         return ~0;      /* No acceptable divider */
363 }
364
365 /*
366  * Find divisor for the given clock and target rate.
367  *
368  * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
369  * they are only settable as part of virtual_prcm set.
370  */
371 static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate,
372         u32 *new_div)
373 {
374         u32 gfx_div[] = {2, 3, 4};
375         u32 sysclkout_div[] = {1, 2, 4, 8, 16};
376         u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16};
377         u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18};
378         u32 best_div = ~0, asize = 0;
379         u32 *div_array = NULL;
380
381         switch (tclk->flags & SRC_RATE_SEL_MASK) {
382         case CM_GFX_SEL1:
383                 asize = 3;
384                 div_array = gfx_div;
385                 break;
386         case CM_PLL_SEL1:
387                 return omap2_dpll_round_rate(target_rate);
388         case CM_SYSCLKOUT_SEL1:
389                 asize = 5;
390                 div_array = sysclkout_div;
391                 break;
392         case CM_CORE_SEL1:
393                 if(tclk == &dss1_fck){
394                         if(tclk->parent == &core_ck){
395                                 asize = 10;
396                                 div_array = dss1_div;
397                         } else {
398                                 *new_div = 0; /* fixed clk */
399                                 return(tclk->parent->rate);
400                         }
401                 } else if((tclk == &vlynq_fck) && cpu_is_omap2420()){
402                         if(tclk->parent == &core_ck){
403                                 asize = 10;
404                                 div_array = vylnq_div;
405                         } else {
406                                 *new_div = 0; /* fixed clk */
407                                 return(tclk->parent->rate);
408                         }
409                 }
410                 break;
411         }
412
413         best_div = omap2_divider_from_table(asize, div_array,
414          tclk->parent->rate, target_rate);
415         if (best_div == ~0){
416                 *new_div = 1;
417                 return best_div; /* signal error */
418         }
419
420         *new_div = best_div;
421         return (tclk->parent->rate / best_div);
422 }
423
424 /* Given a clock and a rate apply a clock specific rounding function */
425 static long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
426 {
427         u32 new_div = 0;
428         int valid_rate;
429
430         if (clk->flags & RATE_FIXED)
431                 return clk->rate;
432
433         if (clk->flags & RATE_CKCTL) {
434                 valid_rate = omap2_clksel_round_rate(clk, rate, &new_div);
435                 return valid_rate;
436         }
437
438         if (clk->round_rate != 0)
439                 return clk->round_rate(clk, rate);
440
441         return clk->rate;
442 }
443
444 /*
445  * Check the DLL lock state, and return tue if running in unlock mode.
446  * This is needed to compenste for the shifted DLL value in unlock mode.
447  */
448 static u32 omap2_dll_force_needed(void)
449 {
450         u32 dll_state = SDRC_DLLA_CTRL;         /* dlla and dllb are a set */
451
452         if ((dll_state & (1 << 2)) == (1 << 2))
453                 return 1;
454         else
455                 return 0;
456 }
457
458 static u32 omap2_reprogram_sdrc(u32 level, u32 force)
459 {
460         u32 slow_dll_ctrl, fast_dll_ctrl, m_type;
461         u32 prev = curr_perf_level, flags;
462
463         if ((curr_perf_level == level) && !force)
464                 return prev;
465
466         m_type = omap2_memory_get_type();
467         slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl();
468         fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl();
469
470         if (level == PRCM_HALF_SPEED) {
471                 local_irq_save(flags);
472                 PRCM_VOLTSETUP = 0xffff;
473                 omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
474                                           slow_dll_ctrl, m_type);
475                 curr_perf_level = PRCM_HALF_SPEED;
476                 local_irq_restore(flags);
477         }
478         if (level == PRCM_FULL_SPEED) {
479                 local_irq_save(flags);
480                 PRCM_VOLTSETUP = 0xffff;
481                 omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
482                                           fast_dll_ctrl, m_type);
483                 curr_perf_level = PRCM_FULL_SPEED;
484                 local_irq_restore(flags);
485         }
486
487         return prev;
488 }
489
490 static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate)
491 {
492         u32 flags, cur_rate, low, mult, div, valid_rate, done_rate;
493         u32 bypass = 0;
494         struct prcm_config tmpset;
495         int ret = -EINVAL;
496
497         local_irq_save(flags);
498         cur_rate = omap2_get_dpll_rate(&dpll_ck);
499         mult = CM_CLKSEL2_PLL & 0x3;
500
501         if ((rate == (cur_rate / 2)) && (mult == 2)) {
502                 omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
503         } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
504                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
505         } else if (rate != cur_rate) {
506                 valid_rate = omap2_dpll_round_rate(rate);
507                 if (valid_rate != rate)
508                         goto dpll_exit;
509
510                 if ((CM_CLKSEL2_PLL & 0x3) == 1)
511                         low = curr_prcm_set->dpll_speed;
512                 else
513                         low = curr_prcm_set->dpll_speed / 2;
514
515                 tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL;
516                 tmpset.cm_clksel1_pll &= ~(0x3FFF << 8);
517                 div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
518                 tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL;
519                 tmpset.cm_clksel2_pll &= ~0x3;
520                 if (rate > low) {
521                         tmpset.cm_clksel2_pll |= 0x2;
522                         mult = ((rate / 2) / 1000000);
523                         done_rate = PRCM_FULL_SPEED;
524                 } else {
525                         tmpset.cm_clksel2_pll |= 0x1;
526                         mult = (rate / 1000000);
527                         done_rate = PRCM_HALF_SPEED;
528                 }
529                 tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12));
530
531                 /* Worst case */
532                 tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS;
533
534                 if (rate == curr_prcm_set->xtal_speed)  /* If asking for 1-1 */
535                         bypass = 1;
536
537                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */
538
539                 /* Force dll lock mode */
540                 omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
541                                bypass);
542
543                 /* Errata: ret dll entry state */
544                 omap2_init_memory_params(omap2_dll_force_needed());
545                 omap2_reprogram_sdrc(done_rate, 0);
546         }
547         omap2_clksel_recalc(&dpll_ck);
548         ret = 0;
549
550 dpll_exit:
551         local_irq_restore(flags);
552         return(ret);
553 }
554
555 /* Just return the MPU speed */
556 static void omap2_mpu_recalc(struct clk * clk)
557 {
558         clk->rate = curr_prcm_set->mpu_speed;
559 }
560
561 /*
562  * Look for a rate equal or less than the target rate given a configuration set.
563  *
564  * What's not entirely clear is "which" field represents the key field.
565  * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
566  * just uses the ARM rates.
567  */
568 static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
569 {
570         struct prcm_config * ptr;
571         long highest_rate;
572
573         if (clk != &virt_prcm_set)
574                 return -EINVAL;
575
576         highest_rate = -EINVAL;
577
578         for (ptr = rate_table; ptr->mpu_speed; ptr++) {
579                 if (ptr->xtal_speed != sys_ck.rate)
580                         continue;
581
582                 highest_rate = ptr->mpu_speed;
583
584                 /* Can check only after xtal frequency check */
585                 if (ptr->mpu_speed <= rate)
586                         break;
587         }
588         return highest_rate;
589 }
590
591 /*
592  * omap2_convert_field_to_div() - turn field value into integer divider
593  */
594 static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val)
595 {
596         u32 i;
597         u32 clkout_array[] = {1, 2, 4, 8, 16};
598
599         if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) {
600                 for (i = 0; i < 5; i++) {
601                         if (field_val == i)
602                                 return clkout_array[i];
603                 }
604                 return ~0;
605         } else
606                 return field_val;
607 }
608
609 /*
610  * Returns the CLKSEL divider register value
611  * REVISIT: This should be cleaned up to work nicely with void __iomem *
612  */
613 static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
614                             struct clk *clk)
615 {
616         int ret = ~0;
617         u32 reg_val, div_off;
618         u32 div_addr = 0;
619         u32 mask = ~0;
620
621         div_off = clk->rate_offset;
622
623         switch ((*div_sel & SRC_RATE_SEL_MASK)) {
624         case CM_MPU_SEL1:
625                 div_addr = (u32)&CM_CLKSEL_MPU;
626                 mask = 0x1f;
627                 break;
628         case CM_DSP_SEL1:
629                 div_addr = (u32)&CM_CLKSEL_DSP;
630                 if (cpu_is_omap2420()) {
631                         if ((div_off == 0) || (div_off == 8))
632                                 mask = 0x1f;
633                         else if (div_off == 5)
634                                 mask = 0x3;
635                 } else if (cpu_is_omap2430()) {
636                         if (div_off == 0)
637                                 mask = 0x1f;
638                         else if (div_off == 5)
639                                 mask = 0x3;
640                 }
641                 break;
642         case CM_GFX_SEL1:
643                 div_addr = (u32)&CM_CLKSEL_GFX;
644                 if (div_off == 0)
645                         mask = 0x7;
646                 break;
647         case CM_MODEM_SEL1:
648                 div_addr = (u32)&CM_CLKSEL_MDM;
649                 if (div_off == 0)
650                         mask = 0xf;
651                 break;
652         case CM_SYSCLKOUT_SEL1:
653                 div_addr = (u32)&PRCM_CLKOUT_CTRL;
654                 if ((div_off == 3) || (div_off = 11))
655                         mask= 0x3;
656                 break;
657         case CM_CORE_SEL1:
658                 div_addr = (u32)&CM_CLKSEL1_CORE;
659                 switch (div_off) {
660                 case 0:                                 /* l3 */
661                 case 8:                                 /* dss1 */
662                 case 15:                                /* vylnc-2420 */
663                 case 20:                                /* ssi */
664                         mask = 0x1f; break;
665                 case 5:                                 /* l4 */
666                         mask = 0x3; break;
667                 case 13:                                /* dss2 */
668                         mask = 0x1; break;
669                 case 25:                                /* usb */
670                         mask = 0x7; break;
671                 }
672         }
673
674         *field_mask = mask;
675
676         if (unlikely(mask == ~0))
677                 div_addr = 0;
678
679         *div_sel = div_addr;
680
681         if (unlikely(div_addr == 0))
682                 return ret;
683
684         /* Isolate field */
685         reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off);
686
687         /* Normalize back to divider value */
688         reg_val >>= div_off;
689
690         return reg_val;
691 }
692
693 /*
694  * Return divider to be applied to parent clock.
695  * Return 0 on error.
696  */
697 static u32 omap2_clksel_get_divisor(struct clk *clk)
698 {
699         int ret = 0;
700         u32 div, div_sel, div_off, field_mask, field_val;
701
702         /* isolate control register */
703         div_sel = (SRC_RATE_SEL_MASK & clk->flags);
704
705         div_off = clk->rate_offset;
706         field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
707         if (div_sel == 0)
708                 return ret;
709
710         div_sel = (SRC_RATE_SEL_MASK & clk->flags);
711         div = omap2_clksel_to_divisor(div_sel, field_val);
712
713         return div;
714 }
715
716 /* Set the clock rate for a clock source */
717 static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
718
719 {
720         int ret = -EINVAL;
721         void __iomem * reg;
722         u32 div_sel, div_off, field_mask, field_val, reg_val, validrate;
723         u32 new_div = 0;
724
725         if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) {
726                 if (clk == &dpll_ck)
727                         return omap2_reprogram_dpll(clk, rate);
728
729                 /* Isolate control register */
730                 div_sel = (SRC_RATE_SEL_MASK & clk->flags);
731                 div_off = clk->rate_offset;
732
733                 validrate = omap2_clksel_round_rate(clk, rate, &new_div);
734                 if (validrate != rate)
735                         return(ret);
736
737                 field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
738                 if (div_sel == 0)
739                         return ret;
740
741                 if (clk->flags & CM_SYSCLKOUT_SEL1) {
742                         switch (new_div) {
743                         case 16:
744                                 field_val = 4;
745                                 break;
746                         case 8:
747                                 field_val = 3;
748                                 break;
749                         case 4:
750                                 field_val = 2;
751                                 break;
752                         case 2:
753                                 field_val = 1;
754                                 break;
755                         case 1:
756                                 field_val = 0;
757                                 break;
758                         }
759                 } else
760                         field_val = new_div;
761
762                 reg = (void __iomem *)div_sel;
763
764                 reg_val = __raw_readl(reg);
765                 reg_val &= ~(field_mask << div_off);
766                 reg_val |= (field_val << div_off);
767                 __raw_writel(reg_val, reg);
768                 wmb();
769                 clk->rate = clk->parent->rate / field_val;
770
771                 if (clk->flags & DELAYED_APP) {
772                         __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
773                         wmb();
774                 }
775                 ret = 0;
776         } else if (clk->set_rate != 0)
777                 ret = clk->set_rate(clk, rate);
778
779         if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
780                 propagate_rate(clk);
781
782         return ret;
783 }
784
785 /* Converts encoded control register address into a full address */
786 static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
787                                struct clk *src_clk, u32 *field_mask)
788 {
789         u32 val = ~0, src_reg_addr = 0, mask = 0;
790
791         /* Find target control register.*/
792         switch ((*type_to_addr & SRC_RATE_SEL_MASK)) {
793         case CM_CORE_SEL1:
794                 src_reg_addr = (u32)&CM_CLKSEL1_CORE;
795                 if (reg_offset == 13) {                 /* DSS2_fclk */
796                         mask = 0x1;
797                         if (src_clk == &sys_ck)
798                                 val = 0;
799                         if (src_clk == &func_48m_ck)
800                                 val = 1;
801                 } else if (reg_offset == 8) {           /* DSS1_fclk */
802                         mask = 0x1f;
803                         if (src_clk == &sys_ck)
804                                 val = 0;
805                         else if (src_clk == &core_ck)   /* divided clock */
806                                 val = 0x10;             /* rate needs fixing */
807                 } else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/
808                         mask = 0x1F;
809                         if(src_clk == &func_96m_ck)
810                                 val = 0;
811                         else if (src_clk == &core_ck)
812                                 val = 0x10;
813                 }
814                 break;
815         case CM_CORE_SEL2:
816                 src_reg_addr = (u32)&CM_CLKSEL2_CORE;
817                 mask = 0x3;
818                 if (src_clk == &func_32k_ck)
819                         val = 0x0;
820                 if (src_clk == &sys_ck)
821                         val = 0x1;
822                 if (src_clk == &alt_ck)
823                         val = 0x2;
824                 break;
825         case CM_WKUP_SEL1:
826                 src_reg_addr = (u32)&CM_CLKSEL_WKUP;
827                 mask = 0x3;
828                 if (src_clk == &func_32k_ck)
829                         val = 0x0;
830                 if (src_clk == &sys_ck)
831                         val = 0x1;
832                 if (src_clk == &alt_ck)
833                         val = 0x2;
834                 break;
835         case CM_PLL_SEL1:
836                 src_reg_addr = (u32)&CM_CLKSEL1_PLL;
837                 mask = 0x1;
838                 if (reg_offset == 0x3) {
839                         if (src_clk == &apll96_ck)
840                                 val = 0;
841                         if (src_clk == &alt_ck)
842                                 val = 1;
843                 }
844                 else if (reg_offset == 0x5) {
845                         if (src_clk == &apll54_ck)
846                                 val = 0;
847                         if (src_clk == &alt_ck)
848                                 val = 1;
849                 }
850                 break;
851         case CM_PLL_SEL2:
852                 src_reg_addr = (u32)&CM_CLKSEL2_PLL;
853                 mask = 0x3;
854                 if (src_clk == &func_32k_ck)
855                         val = 0x0;
856                 if (src_clk == &dpll_ck)
857                         val = 0x2;
858                 break;
859         case CM_SYSCLKOUT_SEL1:
860                 src_reg_addr = (u32)&PRCM_CLKOUT_CTRL;
861                 mask = 0x3;
862                 if (src_clk == &dpll_ck)
863                         val = 0;
864                 if (src_clk == &sys_ck)
865                         val = 1;
866                 if (src_clk == &func_96m_ck)
867                         val = 2;
868                 if (src_clk == &func_54m_ck)
869                         val = 3;
870                 break;
871         }
872
873         if (val == ~0)                  /* Catch errors in offset */
874                 *type_to_addr = 0;
875         else
876                 *type_to_addr = src_reg_addr;
877         *field_mask = mask;
878
879         return val;
880 }
881
882 static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
883 {
884         void __iomem * reg;
885         u32 src_sel, src_off, field_val, field_mask, reg_val, rate;
886         int ret = -EINVAL;
887
888         if (unlikely(clk->flags & CONFIG_PARTICIPANT))
889                 return ret;
890
891         if (clk->flags & SRC_SEL_MASK) {        /* On-chip SEL collection */
892                 src_sel = (SRC_RATE_SEL_MASK & clk->flags);
893                 src_off = clk->src_offset;
894
895                 if (src_sel == 0)
896                         goto set_parent_error;
897
898                 field_val = omap2_get_src_field(&src_sel, src_off, new_parent,
899                                                 &field_mask);
900
901                 reg = (void __iomem *)src_sel;
902
903                 if (clk->usecount > 0)
904                         _omap2_clk_disable(clk);
905
906                 /* Set new source value (previous dividers if any in effect) */
907                 reg_val = __raw_readl(reg) & ~(field_mask << src_off);
908                 reg_val |= (field_val << src_off);
909                 __raw_writel(reg_val, reg);
910                 wmb();
911
912                 if (clk->flags & DELAYED_APP) {
913                         __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
914                         wmb();
915                 }
916                 if (clk->usecount > 0)
917                         _omap2_clk_enable(clk);
918
919                 clk->parent = new_parent;
920
921                 /* SRC_RATE_SEL_MASK clocks follow their parents rates.*/
922                 if ((new_parent == &core_ck) && (clk == &dss1_fck))
923                         clk->rate = new_parent->rate / 0x10;
924                 else
925                         clk->rate = new_parent->rate;
926
927                 if (unlikely(clk->flags & RATE_PROPAGATES))
928                         propagate_rate(clk);
929
930                 return 0;
931         } else {
932                 clk->parent = new_parent;
933                 rate = new_parent->rate;
934                 omap2_clk_set_rate(clk, rate);
935                 ret = 0;
936         }
937
938  set_parent_error:
939         return ret;
940 }
941
942 /* Sets basic clocks based on the specified rate */
943 static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
944 {
945         u32 flags, cur_rate, done_rate, bypass = 0;
946         u8 cpu_mask = 0;
947         struct prcm_config *prcm;
948         unsigned long found_speed = 0;
949
950         if (clk != &virt_prcm_set)
951                 return -EINVAL;
952
953         /* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */
954         if (cpu_is_omap2420())
955                 cpu_mask = RATE_IN_242X;
956         else if (cpu_is_omap2430())
957                 cpu_mask = RATE_IN_243X;
958
959         for (prcm = rate_table; prcm->mpu_speed; prcm++) {
960                 if (!(prcm->flags & cpu_mask))
961                         continue;
962
963                 if (prcm->xtal_speed != sys_ck.rate)
964                         continue;
965
966                 if (prcm->mpu_speed <= rate) {
967                         found_speed = prcm->mpu_speed;
968                         break;
969                 }
970         }
971
972         if (!found_speed) {
973                 printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
974          rate / 1000000);
975                 return -EINVAL;
976         }
977
978         curr_prcm_set = prcm;
979         cur_rate = omap2_get_dpll_rate(&dpll_ck);
980
981         if (prcm->dpll_speed == cur_rate / 2) {
982                 omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
983         } else if (prcm->dpll_speed == cur_rate * 2) {
984                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
985         } else if (prcm->dpll_speed != cur_rate) {
986                 local_irq_save(flags);
987
988                 if (prcm->dpll_speed == prcm->xtal_speed)
989                         bypass = 1;
990
991                 if ((prcm->cm_clksel2_pll & 0x3) == 2)
992                         done_rate = PRCM_FULL_SPEED;
993                 else
994                         done_rate = PRCM_HALF_SPEED;
995
996                 /* MPU divider */
997                 CM_CLKSEL_MPU = prcm->cm_clksel_mpu;
998
999                 /* dsp + iva1 div(2420), iva2.1(2430) */
1000                 CM_CLKSEL_DSP = prcm->cm_clksel_dsp;
1001
1002                 CM_CLKSEL_GFX = prcm->cm_clksel_gfx;
1003
1004                 /* Major subsystem dividers */
1005                 CM_CLKSEL1_CORE = prcm->cm_clksel1_core;
1006                 if (cpu_is_omap2430())
1007                         CM_CLKSEL_MDM = prcm->cm_clksel_mdm;
1008
1009                 /* x2 to enter init_mem */
1010                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
1011
1012                 omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
1013                                bypass);
1014
1015                 omap2_init_memory_params(omap2_dll_force_needed());
1016                 omap2_reprogram_sdrc(done_rate, 0);
1017
1018                 local_irq_restore(flags);
1019         }
1020         omap2_clksel_recalc(&dpll_ck);
1021
1022         return 0;
1023 }
1024
1025 /*-------------------------------------------------------------------------
1026  * Omap2 clock reset and init functions
1027  *-------------------------------------------------------------------------*/
1028
1029 #ifdef CONFIG_OMAP_RESET_CLOCKS
1030 static void __init omap2_clk_disable_unused(struct clk *clk)
1031 {
1032         u32 regval32;
1033
1034         regval32 = __raw_readl(clk->enable_reg);
1035         if ((regval32 & (1 << clk->enable_bit)) == 0)
1036                 return;
1037
1038         printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
1039         _omap2_clk_disable(clk);
1040 }
1041 #else
1042 #define omap2_clk_disable_unused        NULL
1043 #endif
1044
1045 static struct clk_functions omap2_clk_functions = {
1046         .clk_enable             = omap2_clk_enable,
1047         .clk_disable            = omap2_clk_disable,
1048         .clk_round_rate         = omap2_clk_round_rate,
1049         .clk_set_rate           = omap2_clk_set_rate,
1050         .clk_set_parent         = omap2_clk_set_parent,
1051         .clk_disable_unused     = omap2_clk_disable_unused,
1052 };
1053
1054 static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
1055 {
1056         u32 div, aplls, sclk = 13000000;
1057
1058         aplls = CM_CLKSEL1_PLL;
1059         aplls &= ((1 << 23) | (1 << 24) | (1 << 25));
1060         aplls >>= 23;                   /* Isolate field, 0,2,3 */
1061
1062         if (aplls == 0)
1063                 sclk = 19200000;
1064         else if (aplls == 2)
1065                 sclk = 13000000;
1066         else if (aplls == 3)
1067                 sclk = 12000000;
1068
1069         div = PRCM_CLKSRC_CTRL;
1070         div &= ((1 << 7) | (1 << 6));
1071         div >>= sys->rate_offset;
1072
1073         osc->rate = sclk * div;
1074         sys->rate = sclk;
1075 }
1076
1077 /*
1078  * Set clocks for bypass mode for reboot to work.
1079  */
1080 void omap2_clk_prepare_for_reboot(void)
1081 {
1082         u32 rate;
1083
1084         if (vclk == NULL || sclk == NULL)
1085                 return;
1086
1087         rate = clk_get_rate(sclk);
1088         clk_set_rate(vclk, rate);
1089 }
1090
1091 /*
1092  * Switch the MPU rate if specified on cmdline.
1093  * We cannot do this early until cmdline is parsed.
1094  */
1095 static int __init omap2_clk_arch_init(void)
1096 {
1097         if (!mpurate)
1098                 return -EINVAL;
1099
1100         if (omap2_select_table_rate(&virt_prcm_set, mpurate))
1101                 printk(KERN_ERR "Could not find matching MPU rate\n");
1102
1103         propagate_rate(&osc_ck);                /* update main root fast */
1104         propagate_rate(&func_32k_ck);           /* update main root slow */
1105
1106         printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
1107                "%ld.%01ld/%ld/%ld MHz\n",
1108                (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
1109                (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
1110
1111         return 0;
1112 }
1113 arch_initcall(omap2_clk_arch_init);
1114
1115 int __init omap2_clk_init(void)
1116 {
1117         struct prcm_config *prcm;
1118         struct clk ** clkp;
1119         u32 clkrate;
1120
1121         clk_init(&omap2_clk_functions);
1122         omap2_get_crystal_rate(&osc_ck, &sys_ck);
1123
1124         for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
1125              clkp++) {
1126
1127                 if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
1128                         clk_register(*clkp);
1129                         continue;
1130                 }
1131
1132                 if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
1133                         clk_register(*clkp);
1134                         continue;
1135                 }
1136         }
1137
1138         /* Check the MPU rate set by bootloader */
1139         clkrate = omap2_get_dpll_rate(&dpll_ck);
1140         for (prcm = rate_table; prcm->mpu_speed; prcm++) {
1141                 if (prcm->xtal_speed != sys_ck.rate)
1142                         continue;
1143                 if (prcm->dpll_speed <= clkrate)
1144                          break;
1145         }
1146         curr_prcm_set = prcm;
1147
1148         propagate_rate(&osc_ck);                /* update main root fast */
1149         propagate_rate(&func_32k_ck);           /* update main root slow */
1150
1151         printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
1152                "%ld.%01ld/%ld/%ld MHz\n",
1153                (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
1154                (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
1155
1156         /*
1157          * Only enable those clocks we will need, let the drivers
1158          * enable other clocks as necessary
1159          */
1160         clk_enable(&sync_32k_ick);
1161         clk_enable(&omapctrl_ick);
1162
1163         /* Force the APLLs active during bootup to avoid disabling and
1164          * enabling them unnecessarily. */
1165         clk_enable(&apll96_ck);
1166         clk_enable(&apll54_ck);
1167
1168         if (cpu_is_omap2430())
1169                 clk_enable(&sdrc_ick);
1170
1171         /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
1172         vclk = clk_get(NULL, "virt_prcm_set");
1173         sclk = clk_get(NULL, "sys_ck");
1174
1175         return 0;
1176 }
1177
1178 static int __init omap2_disable_aplls(void)
1179 {
1180         clk_disable(&apll96_ck);
1181         clk_disable(&apll54_ck);
1182
1183         return 0;
1184 }
1185 late_initcall(omap2_disable_aplls);