* TI OMAP I2C master mode driver
*
* Copyright (C) 2003 MontaVista Software, Inc.
- * Copyright (C) 2004 Texas Instruments.
- *
- * Updated to work with multiple I2C interfaces on 24xx by
- * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
* Copyright (C) 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2007 Texas Instruments.
*
- * Cleaned up by Juha Yrjölä <juha.yrjola@nokia.com>
+ * Originally written by MontaVista Software, Inc.
+ * Additional contributions by:
+ * Tony Lindgren <tony@atomide.com>
+ * Imre Deak <imre.deak@nokia.com>
+ * Juha Yrjölä <juha.yrjola@solidboot.com>
+ * Syed Khasim <x0khasim@ti.com>
+ * Nishant Menon <nm@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/completion.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
/* timeout waiting for the controller to respond */
#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
+ WARN_ON(!dev->idle);
+
if (dev->iclk != NULL)
clk_enable(dev->iclk);
clk_enable(dev->fclk);
{
u16 iv;
+ WARN_ON(dev->idle);
+
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
if (dev->rev1) {
- iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
+ iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
} else {
omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
/* Enable interrupts */
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
- (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
- OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
- OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
+ (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
+ OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
+ OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0));
return 0;
}
w |= OMAP_I2C_CON_XA;
if (!(msg->flags & I2C_M_RD))
w |= OMAP_I2C_CON_TRX;
+
if (!dev->b_hw && stop)
w |= OMAP_I2C_CON_STP;
+
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
/*
omap_i2c_unidle(dev);
- if ((r = omap_i2c_wait_for_bb(dev)) < 0)
+ r = omap_i2c_wait_for_bb(dev);
+ if (r < 0)
goto out;
for (i = 0; i < num; i++) {
omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
}
+/* rev1 devices are apparently only on some 15xx */
+#ifdef CONFIG_ARCH_OMAP15XX
+
static irqreturn_t
omap_i2c_rev1_isr(int this_irq, void *dev_id)
{
return IRQ_HANDLED;
}
+#else
+#define omap_i2c_rev1_isr NULL
+#endif
static irqreturn_t
omap_i2c_isr(int this_irq, void *dev_id)
speed = 100; /* Defualt speed */
dev->speed = speed;
+ dev->idle = 1;
dev->dev = &pdev->dev;
dev->irq = irq->start;
dev->base = ioremap(mem->start, mem->end - mem->start + 1);
dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
pdev->id, r >> 4, r & 0xf, dev->speed);
+ omap_i2c_idle(dev);
+
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
goto err_free_irq;
}
- omap_i2c_idle(dev);
-
return 0;
err_free_irq: