From d1500f9c75d18d59fef1d084b962057a2e09c4be Mon Sep 17 00:00:00 2001 From: Komal Shah Date: Wed, 22 Mar 2006 07:12:26 -0800 Subject: [PATCH] ARM: OMAP: Documentation/arm/OMAP/README update Attached patch removes bk references and few changes to directory paths for because of mach-omap2. Signed-off-by: Komal Shah Signed-off-by: Tony Lindgren --- Documentation/arm/OMAP/README | 63 ++++++++++++----------------------- 1 file changed, 21 insertions(+), 42 deletions(-) diff --git a/Documentation/arm/OMAP/README b/Documentation/arm/OMAP/README index e002e324483..f8ffb68e858 100644 --- a/Documentation/arm/OMAP/README +++ b/Documentation/arm/OMAP/README @@ -44,7 +44,7 @@ time. The first step is to get a bootloader for your board, u-boot is the recommended one: -http://sourceforge.net/projects/uboot/ +http://www.denx.de/en/Software/GIT Then you need to compile it with the same cross compiler as you would use for the Linux kernel. Then you need to flash it to the board either via the @@ -52,40 +52,16 @@ serial port, or by using a JTAG. Once you have the bootloader running, you can compile the kernel. -You can get the OMAP sources either from the BitKeeper tree, or by -applying patches. The BitKeeper tree has the most up to date sources +You can get the OMAP sources either from the OMAP GIT tree, or by +applying patches. The OMAP GIT tree has the most up to date sources and is the recommended one. -- Using BitKeeper: - -You need to download the bk tool from: - -http://www.bitmover.com/ - -Download the dynamic one (x86-glibc22-linux) instead of the static -(x86-static-linux). Some users reported problems with the static version. - -After bk tool is installed, to learn more about bitkeeper you can follow the -tutorial at: - -http://www.bitkeeper.com/UG/ - -Then you can clone OMAP Linux by: +- Using GIT and cloning OMAP GIT tree please follow the README at: -bk clone http://linux-omap.bkbits.net/main - -Now, you have a copy (clone) of the reprository. To work with it and to -compile the kernel you have to check out the files from your local -repository by: - -bk -r get (or: bk -r edit) - -For kernel related BitKeeper information see also kernel documentation in: - -Documentation/BK-usage/bk-kernel-howto.txt +http://www.muru.com/linux/omap/README_OMAP_GIT Hint: If you are sitting behind a firewall and have to use a proxy for -internet access, you can access BitKeeper by http by setting the +internet access, you can access GIT by http by setting the http_proxy envirionment variable: http_proxy=http://proxy_username:proxy_password@proxy_name:proxy_port/ @@ -104,7 +80,7 @@ abc.host.com: The name of your proxy you use for internet access - Using Patches: -If you don't want to use BitKeeper, then you can do the same thing with patch. +If you don't want to use GIT, then you can do the same thing with patch. Download the latest OMAP Linux patch from: @@ -125,8 +101,8 @@ $ cat ../Linux-2.6.4-omap1 | patch -p1 Note: If OMAP patch from muru.com is against a kernel release candidate, marked by -rcX, then kernel can be found on kernel.org under v2.6/testing/ -Now, if you have a local kernel tree, either by BitKeeper or by patch, you -should look into arch/arm/config/ to see which of the various omap_xxx +Now, if you have a local kernel tree, either by GIT or by patch, you +should look into arch/arm/configs/ to see which of the various omap_xxx configurations there you want to use. For example, if you have a OMAP1510 based Innovator board, you select omap_innovator_1510_defconfig by @@ -206,10 +182,13 @@ time of writing this document in March 2004 four boards are supported: Innovator1510 (OMAP1510 processor), Innovator1610 (OMAP1610 processor), Perseus2 (OMAP730 processor) and H2 (OMAP1610 processor). +Please refer http://www.muru.com/linux/omap/ to get latest information on the +list of boards supported. + /* Discussion needed: How to handle the tons of compatible processors? E.g. what to do if OMAP16xx is mainly identical with OMAP16yy? */ -2. Start with arch/arm/mach-omap/Kconfig and add a new processor or board +2. Start with arch/arm/mach-omap[1/2]/Kconfig and add a new processor or board option. To add a new processor add a new config option to the "OMAP Core Type" choice. @@ -241,7 +220,7 @@ arch/arm/mm/Kconfig. E.g. ARCH_OMAP730 in CPU_ARM926T configuration. 3b. Only for new boards: Register the board within ARM Linux machine registration system from RMK. For the CONFIG_ section use the same name like -in arch/arm/mach-omap/Kconfig. E.g. MACH_OMAP_yyyy. For MACH_TYPE_ section use +in arch/arm/mach-omap[1/2]/Kconfig. E.g. MACH_OMAP_yyyy. For MACH_TYPE_ section use OMAP_yyyy where yyyy is the board name like above. Note: The elements of RMKs machine registration are used in @@ -262,14 +241,14 @@ Use board-yyyy.h with yyyy board name or omapxxxx.h with xxxx processor number. 5. Add a processor or board specific section into include/asm-arm/arch-omap/ hardware.h. Use examples for syntax and use CONFIG_ names as defined in -arch/arm/mach-omap/Kconfig. +arch/arm/mach-omap[1/2]/Kconfig. 6. Add processor or board specific macros to board-yyyy.h or omapxxxx.h. The macros to these specific files have to be named OMAPxxxx_ with xxxx processor number to make them unique. 7a. Only for new boards: Add a file board-yyyy.c with yyyy board name to -arch/arm/mach-omap/. Put board specific initialization code and resource +arch/arm/mach-omap[1/2]/. Put board specific initialization code and resource description into this file. The first element of MACHINE_START must be equal to MACH_TYPE_ section of machine registration (see arch/arm/tools/mach-types after machine registration at RMKs registration system). @@ -278,13 +257,13 @@ Put only code into this file that is board specific and not common. See other board files for examples. 7b. Only for new processors: Add processor specific IO description and -iotable_init() to arch/arm/mach-omap/common.c. See examples for the syntax. +iotable_init() to arch/arm/mach-omap[1/2]/io.c. See examples for the syntax. If you have introduced new clock definition in 2., add support for this new -clock in include/asm-arm/arch-omap/clocks.h and arch/arm/mach-omap/clocks.c. +clock in include/asm-arm/arch-omap/clocks.h and arch/arm/mach-omap[1/2]/clocks.c. 8. Only for new boards: Add "obj-$(CONFIG_MACH_OMAP_yyyy) += board-yyyy.o" with -yyyy board name to arch/arm/mach-omap/Makefile. This is used to compile your new +yyyy board name to arch/arm/mach-omap[1/2]/Makefile. This is used to compile your new board specific initialization code from 7a. 9. Check if other of the existing files have to be adjusted for the new @@ -292,7 +271,7 @@ processor or board. Things to check: - Pin multiplexing - GPIO configuration -- Powermanagement +- Power Management - Clocking - Interrupt controller and interrupt configuration - Additional board specific things (e.g. FPGAs) @@ -431,6 +410,6 @@ add a linux-c-mode to emacs. ------------------------------------------------------------------ -Last modified 13. June 2004 +Last modified 15. March 2006 The OMAP Linux Kernel Team Dirk Behme -- 2.41.0