From ad264679a1d13d5180aa19753708d8e588fee949 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 30 Sep 2008 21:46:59 +0300 Subject: [PATCH] omap: get rid of a useless cast That cast was annyoing for quite a while. Now omap_ctrl_base_get() returns void __iomem * and __raw_read/write friends uses void __iomem * so there's no need for casting. Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-3430sdp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 56f28ae94d6..416d2887ad7 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -128,7 +128,8 @@ static int __init msecure_init(void) /* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */ if (omap_type() == OMAP2_DEVICE_TYPE_GP && system_rev < OMAP3430_REV_ES2_0) { - u32 msecure_pad_config_reg = omap_ctrl_base_get() + 0xA3C; + void __iomem *msecure_pad_config_reg = omap_ctrl_base_get() + + 0xA3C; int mux_mask = 0x04; u16 tmp; @@ -143,10 +144,10 @@ static int __init msecure_init(void) * is low. Make msecure line high in order to change the * TWL4030 RTC time and calender registers. */ - tmp = omap_readw(msecure_pad_config_reg); + tmp = __raw_readw(msecure_pad_config_reg); tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */ tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */ - omap_writew(tmp, msecure_pad_config_reg); + __raw_writew(tmp, msecure_pad_config_reg); gpio_direction_output(TWL4030_MSECURE_GPIO, 1); } -- 2.41.0