From 69e656cc16511719a89d83373c48172d3f39bc5f Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Wed, 7 Jan 2009 00:00:59 +0100 Subject: [PATCH] mISDN: Cleanup hfc multiport driver Remove references to external zaptel modules and some cosmetic cleanups. Signed-off-by: Karsten Keil --- drivers/isdn/hardware/mISDN/hfc_multi.h | 4 - drivers/isdn/hardware/mISDN/hfcmulti.c | 109 ++++++------------------ 2 files changed, 24 insertions(+), 89 deletions(-) diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h index 7bbf7300593..6d74951a179 100644 --- a/drivers/isdn/hardware/mISDN/hfc_multi.h +++ b/drivers/isdn/hardware/mISDN/hfc_multi.h @@ -2,10 +2,6 @@ * see notice in hfc_multi.c */ -extern void ztdummy_extern_interrupt(void); -extern void ztdummy_register_interrupt(void); -extern int ztdummy_unregister_interrupt(void); - #define DEBUG_HFCMULTI_FIFO 0x00010000 #define DEBUG_HFCMULTI_CRC 0x00020000 #define DEBUG_HFCMULTI_INIT 0x00040000 diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index c63e2f49da8..ff5ec3cbeb7 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -140,7 +140,7 @@ * #define HFC_REGISTER_DEBUG */ -static const char *hfcmulti_revision = "2.02"; +#define HFC_MULTI_VERSION "2.03" #include #include @@ -165,10 +165,6 @@ static LIST_HEAD(HFClist); static spinlock_t HFClock; /* global hfc list lock */ static void ph_state_change(struct dchannel *); -static void (*hfc_interrupt)(void); -static void (*register_interrupt)(void); -static int (*unregister_interrupt)(void); -static int interrupt_registered; static struct hfc_multi *syncmaster; static int plxsd_master; /* if we have a master card (yet) */ @@ -209,6 +205,7 @@ static int HFC_cnt, Port_cnt, PCM_cnt = 99; MODULE_AUTHOR("Andreas Eversberg"); MODULE_LICENSE("GPL"); +MODULE_VERSION(HFC_MULTI_VERSION); module_param(debug, uint, S_IRUGO | S_IWUSR); module_param(poll, uint, S_IRUGO | S_IWUSR); module_param(timer, uint, S_IRUGO | S_IWUSR); @@ -1419,19 +1416,6 @@ controller_fail: HFC_outb(hc, R_TI_WD, poll_timer); hc->hw.r_irqmsk_misc |= V_TI_IRQMSK; - /* - * set up 125us interrupt, only if function pointer is available - * and module parameter timer is set - */ - if (timer && hfc_interrupt && register_interrupt) { - /* only one chip should use this interrupt */ - timer = 0; - interrupt_registered = 1; - hc->hw.r_irqmsk_misc |= V_PROC_IRQMSK; - /* deactivate other interrupts in ztdummy */ - register_interrupt(); - } - /* set E1 state machine IRQ */ if (hc->type == 1) hc->hw.r_irqmsk_misc |= V_STA_IRQMSK; @@ -2583,7 +2567,6 @@ hfcmulti_interrupt(int intno, void *dev_id) static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0, iq5 = 0, iq6 = 0, iqcnt = 0; #endif - static int count; struct hfc_multi *hc = dev_id; struct dchannel *dch; u_char r_irq_statech, status, r_irq_misc, r_irq_oview; @@ -2698,16 +2681,11 @@ hfcmulti_interrupt(int intno, void *dev_id) /* -> DTMF IRQ */ hfcmulti_dtmf(hc); } - /* TODO: REPLACE !!!! 125 us Interrupts are not acceptable */ if (r_irq_misc & V_IRQ_PROC) { - /* IRQ every 125us */ - count++; - /* generate 1kHz signal */ - if (count == 8) { - if (hfc_interrupt) - hfc_interrupt(); - count = 0; - } + static int irq_proc_cnt; + if (!irq_proc_cnt++) + printk(KERN_WARNING "%s: got V_IRQ_PROC -" + " this should not happen\n", __func__); } } @@ -4945,9 +4923,7 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent) switch (m->dip_type) { case DIP_4S: /* - * get DIP Setting for beroNet 1S/2S/4S cards - * check if Port Jumper config matches - * module param 'protocol' + * Get DIP setting for beroNet 1S/2S/4S cards * DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) + * GPI 19/23 (R_GPI_IN2)) */ @@ -4966,9 +4942,8 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent) break; case DIP_8S: /* - * get DIP Setting for beroNet 8S0+ cards - * - * enable PCI auxbridge function + * Get DIP Setting for beroNet 8S0+ cards + * Enable PCI auxbridge function */ HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK); /* prepare access to auxport */ @@ -5137,8 +5112,7 @@ static struct pci_device_id hfmultipci_ids[] __devinitdata = { { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */ { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, - PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)}, - /* IOB8ST Recording */ + PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)}, /* IOB8ST Recording */ { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST */ { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, @@ -5188,18 +5162,16 @@ hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct hm_map *m = (struct hm_map *)ent->driver_data; int ret; - if (m == NULL) { - if (ent->vendor == PCI_VENDOR_ID_CCD) - if (ent->device == PCI_DEVICE_ID_CCD_HFC4S || - ent->device == PCI_DEVICE_ID_CCD_HFC8S || - ent->device == PCI_DEVICE_ID_CCD_HFCE1) - printk(KERN_ERR - "unknown HFC multiport controller " - "(vendor:%x device:%x subvendor:%x " - "subdevice:%x) Please contact the " - "driver maintainer for support.\n", - ent->vendor, ent->device, - ent->subvendor, ent->subdevice); + if (m == NULL && ent->vendor == PCI_VENDOR_ID_CCD && ( + ent->device == PCI_DEVICE_ID_CCD_HFC4S || + ent->device == PCI_DEVICE_ID_CCD_HFC8S || + ent->device == PCI_DEVICE_ID_CCD_HFCE1)) { + printk(KERN_ERR + "Unknown HFC multiport controller (vendor:%x device:%x " + "subvendor:%x subdevice:%x)\n", ent->vendor, ent->device, + ent->subvendor, ent->subdevice); + printk(KERN_ERR + "Please contact the driver maintainer for support.\n"); return -ENODEV; } ret = hfcmulti_init(pdev, ent); @@ -5222,22 +5194,9 @@ HFCmulti_cleanup(void) { struct hfc_multi *card, *next; - /* unload interrupt function symbol */ - if (hfc_interrupt) - symbol_put(ztdummy_extern_interrupt); - if (register_interrupt) - symbol_put(ztdummy_register_interrupt); - if (unregister_interrupt) { - if (interrupt_registered) { - interrupt_registered = 0; - unregister_interrupt(); - } - symbol_put(ztdummy_unregister_interrupt); - } - + /* get rid of all devices of this driver */ list_for_each_entry_safe(card, next, &HFClist, list) release_card(card); - /* get rid of all devices of this driver */ pci_unregister_driver(&hfcmultipci_driver); } @@ -5246,8 +5205,10 @@ HFCmulti_init(void) { int err; + printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION); + #ifdef IRQ_DEBUG - printk(KERN_ERR "%s: IRQ_DEBUG IS ENABLED!\n", __func__); + printk(KERN_DEBUG "%s: IRQ_DEBUG IS ENABLED!\n", __func__); #endif spin_lock_init(&HFClock); @@ -5256,22 +5217,11 @@ HFCmulti_init(void) if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG "%s: init entered\n", __func__); - hfc_interrupt = symbol_get(ztdummy_extern_interrupt); - register_interrupt = symbol_get(ztdummy_register_interrupt); - unregister_interrupt = symbol_get(ztdummy_unregister_interrupt); - printk(KERN_INFO "mISDN: HFC-multi driver %s\n", - hfcmulti_revision); - switch (poll) { case 0: poll_timer = 6; poll = 128; break; - /* - * wenn dieses break nochmal verschwindet, - * gibt es heisse ohren :-) - * "without the break you will get hot ears ???" - */ case 8: poll_timer = 2; break; @@ -5301,17 +5251,6 @@ HFCmulti_init(void) err = pci_register_driver(&hfcmultipci_driver); if (err < 0) { printk(KERN_ERR "error registering pci driver: %x\n", err); - if (hfc_interrupt) - symbol_put(ztdummy_extern_interrupt); - if (register_interrupt) - symbol_put(ztdummy_register_interrupt); - if (unregister_interrupt) { - if (interrupt_registered) { - interrupt_registered = 0; - unregister_interrupt(); - } - symbol_put(ztdummy_unregister_interrupt); - } return err; } return 0; -- 2.41.0