Martin Devera [Mon, 27 Feb 2006 22:11:45 +0000 (23:11 +0100)]
[PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 support
Add Broadcom HT-1000 south bridge's PCI ID to i2c-piix driver. Note
that at least on Supermicro H8SSL it uses non-standard SMBHSTCFG = 3
and standard values like 0 or 9 causes hangup.
Signed-off-by: Martin Devera <devik@cdi.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sun, 5 Feb 2006 22:26:51 +0000 (23:26 +0100)]
[PATCH] w83781d: Don't reset the chip by default
Stop resetting the chip on load by default, so as to preserve the BIOS
initializations. Same was done in the w83627hf driver some times ago
for the same reasons.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sun, 5 Feb 2006 22:25:25 +0000 (23:25 +0100)]
[PATCH] w83781d: Document the alarm and beep bits
Document the individual alarm and beep bits of the w83781d driver.
Ideally we would offer a chip-independant interface for them, but
until it's done, it's only fair that we document the current
interface.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Wed, 18 Jan 2006 22:22:12 +0000 (23:22 +0100)]
[PATCH] hwmon: Add support for the Winbond W83687THF
Add support for the Winbond W83687THF chip to the w83627hf hardware
monitoring driver. This new chip is almost similar to the already
supported W83627THF chip, except for VID and a few other minor
changes.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jim Cromie [Wed, 18 Jan 2006 22:10:49 +0000 (23:10 +0100)]
[PATCH] hwmon: Refactor SENSOR_DEVICE_ATTR_2
This patch refactors SENSOR_DEVICE_ATTR_2 macro, following pattern set by
SENSOR_ATTR. First it creates a new macro SENSOR_ATTR_2() which expands
to an initialization expression, then it uses that in SENSOR_DEVICE_ATTR_2,
which declares and initializes a struct sensor_device_attribute_2.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sun, 22 Jan 2006 11:28:57 +0000 (12:28 +0100)]
[PATCH] I2C: fix sx200_acb build on other arches
scx200_acb is only useful on a few Geode-based systems, and won't
compile on non-x86 systems due to the lack of asm/msr.h, as reported
by Andrew Morton. Thus, we should make that driver depend on X86.
Convert the f71805f driver to use arrays of attributes. This shrinks the
compiled module from 12.0 kB to 9.6 kB. We certainly should do the same
for as many hardware monitoring drivers as possible.
This, together with a nice chip design by Fintek, makes this driver
very small, both in terms of number of lines of code and memory
consumption.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jim Cromie [Mon, 9 Jan 2006 22:22:24 +0000 (23:22 +0100)]
[PATCH] hwmon: Allow sensor attributes arrays
This patch refactors SENSOR_DEVICE_ATTR macro. First it creates a new
macro SENSOR_ATTR() which expands to an initialization expression, then
it uses that in SENSOR_DEVICE_ATTR, which declares and initializes a
struct sensor_device_attribute.
IOW, SENSOR_ATTR() imitates __ATTR() in include/linux/device.h.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Benjamin LaHaise [Thu, 23 Mar 2006 11:01:08 +0000 (03:01 -0800)]
[PATCH] reduce size of bio mempools
The biovec default mempool limit of 256 entries results in over 3MB of RAM
being permanently pinned, even on systems with only 128MB of RAM. Since
mempool tries to allocate from the system pool first, it makes sense to
reduce the size of the mempool fallbacks to a more reasonable limit of 1-5
entries -- enough for the system to be able to make progress even under
load.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Acked-by: Jens Axboe <axboe@suse.de> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Dumazet [Thu, 23 Mar 2006 11:01:07 +0000 (03:01 -0800)]
[PATCH] __GENERIC_PER_CPU changes
Now CONFIG_DEBUG_INITDATA is in, initial percpu data
[__per_cpu_start,__per_cpu_end] can be declared as a redzone, and invalid
accesses after boot can be detected, at least for i386.
We can let non possible cpus percpu data point to this 'redzone' instead of
NULL .
NULL was not a good choice because part of [0..32768] memory may be
readable and invalid accesses may happen unnoticed.
If CONFIG_DEBUG_INITDATA is not defined, each non possible cpu points to
the initial percpu data (__per_cpu_offset[cpu] == 0), thus invalid accesses
wont be detected/crash.
This patch also moves __per_cpu_offset[] to read_mostly area to avoid false
sharing.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Thu, 23 Mar 2006 11:01:05 +0000 (03:01 -0800)]
[PATCH] more for_each_cpu() conversions
When we stop allocating percpu memory for not-possible CPUs we must not touch
the percpu data for not-possible CPUs at all. The correct way of doing this
is to test cpu_possible() or to use for_each_cpu().
This patch is a kernel-wide sweep of all instances of NR_CPUS. I found very
few instances of this bug, if any. But the patch converts lots of open-coded
test to use the preferred helper macros.
Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Acked-by: Kyle McMartin <kyle@parisc-linux.org> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Andi Kleen <ak@muc.de> Cc: Christian Zankel <chris@zankel.net> Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: Nathan Scott <nathans@sgi.com> Cc: Jens Axboe <axboe@suse.de> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eliminate a handful of cache references by keeping current in a register
instead of reloading (helps x86) and avoiding the overhead of a function
call. Inlining eventpoll_init_file() saves 24 bytes. Also reorder file
initialization to make writes occur more sequentially.
Signed-off-by: Benjamin LaHaise <bcrl@linux.intel.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Thu, 23 Mar 2006 11:00:57 +0000 (03:00 -0800)]
[PATCH] pause_on_oops command line option
Attempt to fix the problem wherein people's oops reports scroll off the screen
due to repeated oopsing or to oopses on other CPUs.
If this happens the user can reboot with the `pause_on_oops=<seconds>' option.
It will allow the first oopsing CPU to print an oops record just a single
time. Second oopsing attempts, or oopses on other CPUs will cause those CPUs
to enter a tight loop until the specified number of seconds have elapsed.
The patch implements the infrastructure generically in the expectation that
architectures other than x86 will find it useful.
Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arjan van de Ven [Thu, 23 Mar 2006 11:00:48 +0000 (03:00 -0800)]
[PATCH] fat_lock is used as a mutex, convert it to using the new mutex primitive
The fat code uses the fat_lock always in a mutex way (taking and releasing
the lock in the same function), the patch below converts it into the new
mutex primitive. Please consider this patch for the code.
Signed-off-by: Arjan van de Ven <arjan@infradead.org> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arjan van de Ven [Thu, 23 Mar 2006 11:00:35 +0000 (03:00 -0800)]
[PATCH] sem2mutex: jbd, j_checkpoint_mutex
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arjan van de Ven [Thu, 23 Mar 2006 11:00:33 +0000 (03:00 -0800)]
[PATCH] sem2mutex: vfs_rename_mutex
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ingo Molnar [Thu, 23 Mar 2006 11:00:31 +0000 (03:00 -0800)]
[PATCH] sem2mutex: tty
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ingo Molnar [Thu, 23 Mar 2006 11:00:30 +0000 (03:00 -0800)]
[PATCH] sem2mutex: inotify
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: John McCutchan <ttb@tentacle.dhs.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Robert Love <rml@novell.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arjan van de Ven [Thu, 23 Mar 2006 11:00:24 +0000 (03:00 -0800)]
[PATCH] sem2mutex: kernel/
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jan Kara [Thu, 23 Mar 2006 11:00:17 +0000 (03:00 -0800)]
[PATCH] Fix oops in invalidate_dquots()
When quota is being turned off we assumed that all the references to dquots
were already dropped. That need not be true as inodes being deleted are
not on superblock's inodes list and hence we need not reach it when
removing quota references from inodes. So invalidate_dquots() has to wait
for all the users of dquots (as quota is already marked as turned off, no
new references can be acquired and so this is bound to happen rather
early). When we do this, we can also remove the iprune_sem locking as it
was protecting us against exactly the same problem when freeing inodes
icache memory.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kyle McMartin [Thu, 23 Mar 2006 11:00:16 +0000 (03:00 -0800)]
[PATCH] Move read_mostly definition to asm/cache.h
Seems like needless clutter having a bunch of #if defined(CONFIG_$ARCH) in
include/linux/cache.h. Move the per architecture section definition to
asm/cache.h, and keep the if-not-defined dummy case in linux/cache.h to
catch architectures which don't implement the section.
Verified that symbols still go in .data.read_mostly on parisc,
and the compile doesn't break.
Since early 2.4.x all cdrom drivers implement the block_device methods
themselves, so they can handle additional ioctls directly instead of going
through the cdrom layer.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Avoid taking global tasklist_lock for single threadedprocess at getrusage()
Avoid taking the global tasklist_lock when possible, if a process is single
threaded during getrusage(). Any avoidance of tasklist_lock is good for
NUMA boxes (and possibly for large SMPs). Thanks to Oleg Nesterov for
review and suggestions.
Eric Dumazet [Thu, 23 Mar 2006 11:00:12 +0000 (03:00 -0800)]
[PATCH] Shrinks sizeof(files_struct) and better layout
1) Reduce the size of (struct fdtable) to exactly 64 bytes on 32bits
platforms, lowering kmalloc() allocated space by 50%.
2) Reduce the size of (files_struct), using a special 32 bits (or
64bits) embedded_fd_set, instead of a 1024 bits fd_set for the
close_on_exec_init and open_fds_init fields. This save some ram (248
bytes per task) as most tasks dont open more than 32 files. D-Cache
footprint for such tasks is also reduced to the minimum.
3) Reduce size of allocated fdset. Currently two full pages are
allocated, that is 32768 bits on x86 for example, and way too much. The
minimum is now L1_CACHE_BYTES.
UP and SMP should benefit from this patch, because most tasks will touch
only one cache line when open()/close() stdin/stdout/stderr (0/1/2),
(next_fd, close_on_exec_init, open_fds_init, fd_array[0 .. 2] being in the
same cache line)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Thu, 23 Mar 2006 11:00:11 +0000 (03:00 -0800)]
[PATCH] ext3_readdir: use generic readahead
Linus points out that ext3_readdir's readahead only cuts in when
ext3_readdir() is operating at the very start of the directory. So for large
directories we end up performing no readahead at all and we suck.
So take it all out and use the core VM's page_cache_readahead(). This means
that ext3 directory reads will use all of readahead's dynamic sizing goop.
Note that we're using the directory's filp->f_ra to hold the readahead state,
but readahead is actually being performed against the underlying blockdev's
address_space. Fortunately the readahead code is all set up to handle this.
Tested with printk. It works. I was struggling to find a real workload which
actually cared.
(The patch also exports page_cache_readahead() to GPL modules)
Cc: "Stephen C. Tweedie" <sct@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-2.6-omap-h63xx.git / log