Linus Torvalds [Thu, 23 Oct 2008 17:14:45 +0000 (10:14 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9p: fix sparse warnings
9p: rdma: RDMA Transport Support for 9P
9p: fix format warning
9p: fix debug build error
Linus Torvalds [Thu, 23 Oct 2008 17:14:23 +0000 (10:14 -0700)]
Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux:
nfsd: clean up expkey_parse error cases
nfsd: Drop reference in expkey_parse error cases
nfsd: Fix memory leak in nfsd_getxattr
NFSD: Fix BUG during NFSD shutdown processing
Linus Torvalds [Thu, 23 Oct 2008 17:10:25 +0000 (10:10 -0700)]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
i2c: Add info->archdata field
i2c: Inform about deprecated chips directory
i2c: Use pci_ioremap_bar()
Schedule removal of the legacy i2c device driver binding model
i2c: Clean up <linux/i2c.h>
i2c: Update and clean up writing-clients document
i2c: Drop 2-byte address block transfer defines
i2c: Delete legacy model documentation
i2c: Constify i2c_get_clientdata's parameter
i2c: Delete outdated client porting guide
i2c: Make clear what the class field of i2c_adapter is good for
i2c-algo-pcf: Fix typo in debugging log message
i2c-algo-pcf: Add adapter hooks around xfer begin and end
i2c-algo-pcf: Pass adapter data into ->waitforpin() method
i2c-i801: Add support for Intel Ibex Peak
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: don't rebind drivers after failed resume or reset
USB: fix memory leak in cdc-acm
USB: Unusual dev for Mio moov 330 gps
USB: cdc-wdm: make module autoload work
USB: Fix unneeded endpoint check in pxa27x_udc
usb/gadget: fix kernel-doc warning
USB: Speedtouch: add pre_reset and post_reset routines
USB: usbtest.c: length, sglen and vary are unsigned, so cannot be negative
USB: support Huawei data card product IDs
USB: add ZTE MF626 USB GSM modem entry
USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA bridge
USB: Fix debugfs_create_file's error checking method for usb/gadget/s3c2410_udc
USB: ohci: add support for tmio-ohci cell
Linus Torvalds [Thu, 23 Oct 2008 17:05:40 +0000 (10:05 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile: (21 commits)
OProfile: Fix buffer synchronization for IBS
oprofile: hotplug cpu fix
oprofile: fixing whitespaces in arch/x86/oprofile/*
oprofile: fixing whitespaces in arch/x86/oprofile/*
oprofile: fixing whitespaces in drivers/oprofile/*
x86/oprofile: add the logic for enabling additional IBS bits
x86/oprofile: reordering functions in nmi_int.c
x86/oprofile: removing unused function parameter in add_ibs_begin()
oprofile: more whitespace fixes
oprofile: whitespace fixes
OProfile: Rename IBS sysfs dir into "ibs_op"
OProfile: Rework string handling in setup_ibs_files()
OProfile: Rework oprofile_add_ibs_sample() function
oprofile: discover counters for op ppro too
oprofile: Implement Intel architectural perfmon support
oprofile: Don't report Nehalem as core_2
oprofile: drop const in num counters field
Revert "Oprofile Multiplexing Patch"
x86, oprofile: BUG: using smp_processor_id() in preemptible code
x86/oprofile: fix on_each_cpu build error
...
Manually fixed trivial conflicts in
drivers/oprofile/{cpu_buffer.c,event_buffer.h}
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
stop_machine: fix error code handling on multiple cpus
stop_machine: use workqueues instead of kernel threads
workqueue: introduce create_rt_workqueue
Call init_workqueues before pre smp initcalls.
Make panic= and panic_on_oops into core_params
Make initcall_debug a core_param
core_param() for genuinely core kernel parameters
param: Fix duplicate module prefixes
module: check kernel param length at compile time, not runtime
Remove stop_machine during module load v2
module: simplify load_module.
Linus Torvalds [Thu, 23 Oct 2008 16:59:29 +0000 (09:59 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (36 commits)
V4L/DVB (9336): cx88: always de-alloc frontends on fault condition
V4L/DVB (9335): videobuf: split unregister bus creating self-contained frontend de-allocator
V4L/DVB (9334): cx88: dvb_remove debug output
V4L/DVB (9333): cx88: Not all boards that requires cx88-mpeg has frontends
V4L/DVB (9332): cx88: initial fix for analogue only compilation
V4L/DVB (9331): Remove unused inode parameter from video_ioctl2
V4L/DVB (9330): Get rid of inode parameter at v4l_compat_translate_ioctl()
V4L/DVB (9328): ivtvfb: FB_BLANK_POWERDOWN turns off video output
V4L/DVB (9327): v4l: use video_device.num instead of minor in video%d
V4L/DVB (9326): ivtv: avoid green flashing when loading ivtv
V4L/DVB (9325): ivtv: switch to unlocked_ioctl.
V4L/DVB (9324): v4l2: add video_ioctl2_unlocked for unlocked_ioctl support.
V4L/DVB (9323): v4l2-int-if: Add enum_framesizes and enum_frameintervals ioctls.
V4L/DVB (9322): v4l2-int-if: Export more interfaces to modules
V4L/DVB (9321): v4l2-int-if: Define new power state changes
V4L/DVB (9320): v4l2: Add 10-bit RAW Bayer formats
V4L/DVB (9319): v4l2-int-if: Add cropcap, g_crop and s_crop commands.
V4L/DVB (9318): v4l2-int-if: Add command to get slave private data.
V4L/DVB (9316): s5h1411: Power down s5h1411 when not in use
V4L/DVB (9315): s5h1411: Skip reconfiguring demod modulation if already at the desired modulation
...
Linus Torvalds [Thu, 23 Oct 2008 16:53:14 +0000 (09:53 -0700)]
Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
Admit to maintaining VT-d, for my sins.
dmar: fix uninitialised 'ret' variable in dmar_parse_dev()
intel-iommu: use coherent_dma_mask in alloc_coherent
amd_iommu: fix nasty bug that caused ILLEGAL_DEVICE_TABLE_ENTRY errors
intel-iommu: IA64 support
dmar: remove the quirk which disables dma-remapping when intr-remapping enabled
dmar: Use queued invalidation interface for IOTLB and context invalidation
dmar: context cache and IOTLB invalidation using queued invalidation
dmar: use spin_lock_irqsave() in qi_submit_sync()
Linus Torvalds [Thu, 23 Oct 2008 16:37:16 +0000 (09:37 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: disable the hrtick for now
sched: revert back to per-rq vruntime
sched: fair scheduler should not resched rt tasks
sched: optimize group load balancer
sched: minor fast-path overhead reduction
sched: fix the wrong mask_len, cleanup
sched: kill unused scheduler decl.
sched: fix the wrong mask_len
sched: only update rq->clock while holding rq->lock
Linus Torvalds [Thu, 23 Oct 2008 16:36:55 +0000 (09:36 -0700)]
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: NULL struct irq_desc's member 'name' in dynamic_irq_cleanup()
genirq: fix off by one and coding style
genirq: fix set_irq_type() when recording trigger type
Lee Howard [Tue, 21 Oct 2008 12:50:14 +0000 (13:50 +0100)]
8250: Add more OxSemi devices
These have the Mainpine PCI identifier on however
Additional paranoia check for Tornado versions added by Alan Cox
(and this time I remembered to do an stg refresh so that the corrections ended
up in these patches not randomly attached to another diff -- Alan)
Signed-off-by: Lee Howard <lee.howard@mainpine.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lee Howard [Tue, 21 Oct 2008 12:48:58 +0000 (13:48 +0100)]
8250: Oxford Semiconductor Devices
Add support for the OxSemi 'Tornado' devices.
Reformatted and reworked a bit by Alan Cox
Signed-off-by: Lee Howard <lee.howard@mainpine.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Tue, 21 Oct 2008 12:47:44 +0000 (13:47 +0100)]
tty: Fix tty_port kref screwup
Pass the brown paper bags please. I changed the semantics of this so the
function was supposed to do the extra kref itself then forgot to do the
change.. duh....
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Tue, 21 Oct 2008 12:44:58 +0000 (13:44 +0100)]
watchdog: Fix warning
This seems to have popped up after the recent merges:
drivers/watchdog/w83697ug_wdt.c: In function ‘w83697ug_select_wd_register’:
drivers/watchdog/w83697ug_wdt.c:105: warning: ‘return’ with a value, in function returning void
Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin [Tue, 21 Oct 2008 08:59:15 +0000 (10:59 +0200)]
mutex: speed up generic mutex implementations
- atomic operations which both modify the variable and return something imply
full smp memory barriers before and after the memory operations involved
(failing atomic_cmpxchg, atomic_add_unless, etc don't imply a barrier because
they don't modify the target). See Documentation/atomic_ops.txt.
So remove extra barriers and branches.
- All architectures support atomic_cmpxchg. This has no relation to
__HAVE_ARCH_CMPXCHG. We can just take the atomic_cmpxchg path unconditionally
This reduces a simple single threaded fastpath lock+unlock test from 590 cycles
to 203 cycles on a ppc970 system.
Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
xtensa: Add config files for Diamond 232L - Rev B processor variant
xtensa: Fix io regions
xtensa: Add support for the Sonic Ethernet device for the XT2000 board.
xtensa: replace remaining __FUNCTION__ occurrences
xtensa: use newer __SPIN_LOCK_UNLOCKED macro
XTENSA: warn about including <asm/rwsem.h> directly.
page_cgroup_init() is called from mem_cgroup_init(). But at this
point, we cannot call alloc_bootmem().
(and this caused panic at boot.)
This patch moves page_cgroup_init() to init/main.c.
Time table is following:
==
parse_args(). # we can trust mem_cgroup_subsys.disabled bit after this.
....
cgroup_init_early() # "early" init of cgroup.
....
setup_arch() # memmap is allocated.
...
page_cgroup_init();
mem_init(); # we cannot call alloc_bootmem after this.
....
cgroup_init() # mem_cgroup is initialized.
==
Before page_cgroup_init(), mem_map must be initialized. So,
I added page_cgroup_init() to init/main.c directly.
(*) maybe this is not very clean but
- cgroup_init_early() is too early
- in cgroup_init(), we have to use vmalloc instead of alloc_bootmem().
use of vmalloc area in x86-32 is important and we should avoid very large
vmalloc() in x86-32. So, we want to use alloc_bootmem() and added page_cgroup_init()
directly to init/main.c
Duane Griffin [Wed, 22 Oct 2008 21:15:03 +0000 (14:15 -0700)]
jbd: abort instead of waiting for nonexistent transactions
The __log_wait_for_space function sits in a loop checkpointing
transactions until there is sufficient space free in the journal.
However, if there are no transactions to be processed (e.g. because the
free space calculation is wrong due to a corrupted filesystem) it will
never progress.
Check for space being required when no transactions are outstanding and
abort the journal instead of endlessly looping.
This patch fixes the bug reported by Sami Liedes at:
http://bugzilla.kernel.org/show_bug.cgi?id=10976
Signed-off-by: Duane Griffin <duaneg@dghda.com> Tested-by: Sami Liedes <sliedes@cc.hut.fi> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hidehiro Kawai [Wed, 22 Oct 2008 21:15:02 +0000 (14:15 -0700)]
jbd: test BH_Write_EIO to detect errors on metadata buffers
__try_to_free_cp_buf(), __process_buffer(), and __wait_cp_io() test
BH_Uptodate flag to detect write I/O errors on metadata buffers. But by
commit 95450f5a7e53d5752ce1a0d0b8282e10fe745ae0 "ext3: don't read inode
block if the buffer has a write error"(*), BH_Uptodate flag can be set to
inode buffers with BH_Write_EIO in order to avoid reading old inode data.
So now, we have to test BH_Write_EIO flag of checkpointing inode buffers
instead of BH_Uptodate. This patch does it.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hidehiro Kawai [Wed, 22 Oct 2008 21:15:01 +0000 (14:15 -0700)]
ext3: add checks for errors from jbd
If the journal has aborted due to a checkpointing failure, we have to
keep the contents of the journal space. Otherwise, the filesystem will
lose uncheckpointed metadata completely and become inconsistent. To
avoid this, we need to keep needs_recovery flag if checkpoint has
failed.
With this patch, ext3_put_super() detects a checkpointing failure from
the return value of journal_destroy(), then it invokes ext3_abort() to
make the filesystem read only and keep needs_recovery flag. Errors
from journal_flush() are also handled by this patch in some places.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Jan Kara <jack@ucw.cz> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hidehiro Kawai [Wed, 22 Oct 2008 21:15:00 +0000 (14:15 -0700)]
jbd: fix error handling for checkpoint io
When a checkpointing IO fails, current JBD code doesn't check the error
and continue journaling. This means latest metadata can be lost from both
the journal and filesystem.
This patch leaves the failed metadata blocks in the journal space and
aborts journaling in the case of log_do_checkpoint(). To achieve this, we
need to do:
1. don't remove the failed buffer from the checkpoint list where in
the case of __try_to_free_cp_buf() because it may be released or
overwritten by a later transaction
2. log_do_checkpoint() is the last chance, remove the failed buffer
from the checkpoint list and abort the journal
3. when checkpointing fails, don't update the journal super block to
prevent the journaled contents from being cleaned. For safety,
don't update j_tail and j_tail_sequence either
4. when checkpointing fails, notify this error to the ext3 layer so
that ext3 don't clear the needs_recovery flag, otherwise the
journaled contents are ignored and cleaned in the recovery phase
5. if the recovery fails, keep the needs_recovery flag
6. prevent cleanup_journal_tail() from being called between
__journal_drop_transaction() and journal_abort() (a race issue
between journal_flush() and __log_wait_for_space()
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Mundt [Wed, 22 Oct 2008 21:14:58 +0000 (14:14 -0700)]
mm: page_cgroup needs linux/vmalloc.h for vmalloc_node()/vfree().
mm/page_cgroup.c: In function 'init_section_page_cgroup':
mm/page_cgroup.c:111: error: implicit declaration of function 'vmalloc_node'
mm/page_cgroup.c:111: warning: assignment makes pointer from integer without a cast
mm/page_cgroup.c: In function '__free_page_cgroup':
mm/page_cgroup.c:140: error: implicit declaration of function 'vfree'
Signed-off-by: Paul Mundt <lethal@linux-sh.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (53 commits)
powerpc: Support for relocatable kdump kernel
powerpc: Don't use a 16G page if beyond mem= limits
powerpc: Add del_node() for early boot code to prune inapplicable devices.
powerpc: Further compile fixup for STRICT_MM_TYPECHECKS
powerpc: Remove empty #else from signal_64.c
powerpc: Move memory size print into common show_cpuinfo for 32-bit
hvc_console: Remove __devexit annotation of hvc_remove()
hvc_console: Add support for tty window resizing
hvc_console: Fix loop if put_char() returns 0
hvc_console: Add tty driver flag TTY_DRIVER_RESET_TERMIOS
hvc_console: Add a hangup notifier for backends
powerpc/83xx: Add DS1339 RTC support for MPC8349E-mITX boards .dts
powerpc/83xx: Add support for MCU microcontroller in .dts files
powerpc/85xx: Move mpc8572ds.dts to address-cells/size-cells = <2>
of/spi: Support specifying chip select as active high via device tree
powerpc: Remove device_type = "board_control" properties in .dts files
i2c-cpm: Suppress autoprobing for devices
powerpc/85xx: Fix mpc8536ds dma interrupt numbers
powerpc/85xx: Enable enhanced functions for 8536 TSEC
powerpc: Delete unused prom_strtoul and prom_memparse
...
Linus Torvalds [Thu, 23 Oct 2008 15:20:34 +0000 (08:20 -0700)]
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (47 commits)
uwb: wrong sizeof argument in mac address compare
uwb: don't use printk_ratelimit() so often
uwb: use kcalloc where appropriate
uwb: use time_after() when purging stale beacons
uwb: add credits for the original developers of the UWB/WUSB/WLP subsystems
uwb: add entries in the MAINTAINERS file
uwb: depend on EXPERIMENTAL
wusb: wusb-cbaf (CBA driver) sysfs ABI simplification
uwb: document UWB and WUSB sysfs files
uwb: add symlinks in sysfs between radio controllers and PALs
uwb: dont tranmit identification IEs
uwb: i1480/GUWA100U: fix firmware download issues
uwb: i1480: remove MAC/PHY information checking function
uwb: add Intel i1480 HWA to the UWB RC quirk table
uwb: disable command/event filtering for D-Link DUB-1210
uwb: initialize the debug sub-system
uwb: Fix handling IEs with empty IE data in uwb_est_get_size()
wusb: fix bmRequestType for Abort RPipe request
wusb: fix error path for wusb_set_dev_addr()
wusb: add HWA host controller driver
...
Linus Torvalds [Thu, 23 Oct 2008 15:16:03 +0000 (08:16 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/ehca: Reject dynamic memory add/remove when ehca adapter is present
IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter
IPoIB: Set netdev offload features properly for child (VLAN) interfaces
IPoIB: Clean up ethtool support
mlx4_core: Add Ethernet PCI device IDs
mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC
mlx4_core: Multiple port type support
mlx4_core: Ethernet MAC/VLAN management
mlx4_core: Get ethernet MTU and default address from firmware
mlx4_core: Support multiple pre-reserved QP regions
Update NetEffect maintainer emails to Intel emails
RDMA/cxgb3: Remove cmid reference on tid allocation failures
IB/mad: Use krealloc() to resize snoop table
IPoIB: Always initialize poll_timer to avoid crash on unload
IB/ehca: Don't allow creating UC QP with SRQ
mlx4_core: Add QP range reservation support
RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()
Linus Torvalds [Thu, 23 Oct 2008 15:15:29 +0000 (08:15 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
sata_via: load DEVICE register when CTL changes
libata: set device class to NONE if phys_offline
libata-eh: fix slave link EH action mask handling
libata: transfer EHI control flags to slave ehc.i
libata-sff: fix ata_sff_post_internal_cmd()
libata: initialize port_task when !CONFIG_ATA_SFF
Linus Torvalds [Thu, 23 Oct 2008 15:07:35 +0000 (08:07 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (41 commits)
[IA64] Fix annoying IA64_TR_ALLOC_MAX message.
[IA64] kill sys32_pipe
[IA64] remove sys32_pause
[IA64] Add Variable Page Size and IA64 Support in Intel IOMMU
ia64/pv_ops: paravirtualized instruction checker.
ia64/xen: a recipe for using xen/ia64 with pv_ops.
ia64/pv_ops: update Kconfig for paravirtualized guest and xen.
ia64/xen: preliminary support for save/restore.
ia64/xen: define xen machine vector for domU.
ia64/pv_ops/xen: implement xen pv_time_ops.
ia64/pv_ops/xen: implement xen pv_irq_ops.
ia64/pv_ops/xen: define the nubmer of irqs which xen needs.
ia64/pv_ops/xen: implement xen pv_iosapic_ops.
ia64/pv_ops/xen: paravirtualize entry.S for ia64/xen.
ia64/pv_ops/xen: paravirtualize ivt.S for xen.
ia64/pv_ops/xen: paravirtualize DO_SAVE_MIN for xen.
ia64/pv_ops/xen: define xen paravirtualized instructions for hand written assembly code
ia64/pv_ops/xen: define xen pv_cpu_ops.
ia64/pv_ops/xen: define xen pv_init_ops for various xen initialization.
ia64/pv_ops/xen: elf note based xen startup.
...
Tejun Heo [Tue, 21 Oct 2008 15:31:34 +0000 (00:31 +0900)]
libata: set device class to NONE if phys_offline
Reset methods don't have access to phys link status for slave links
and may incorrectly indicate device presence causing unnecessary probe
failures for unoccupied links. This patch clears device class to NONE
during post-reset processing if phys link is offline.
As on/offlineness semantics is strictly defined and used in multiple
places by the core layer, this won't change behavior for drivers which
don't use slave links.
Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Tue, 21 Oct 2008 11:37:21 +0000 (20:37 +0900)]
libata-eh: fix slave link EH action mask handling
Slave link action mask is transferred to master link and all the EH
actions are taken by the master link. ata_eh_about_to_do() and
ata_eh_done() are called with ATA_EH_ALL_ACTIONS to clear the slave
link actions during transfer. This always sets ATA_PFLAG_RECOVERED
flag causing spurious "EH complete" messages.
Don't set ATA_PFLAG_RECOVERED for slave link actions.
Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Tue, 21 Oct 2008 05:26:39 +0000 (14:26 +0900)]
libata: transfer EHI control flags to slave ehc.i
ATA_EHI_NO_AUTOPSY and ATA_EHI_QUIET are used to control the behavior
of EH. As only the master link is visible outside EH, these flags are
set only for the master link although they should also apply to the
slave link, which causes spurious EH messages during probe and
suspend/resume.
This patch transfers those two flags to slave ehc.i before performing
slave autopsy and reporting.
Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Fixes build problem with 9p when building with debug disabled.
Also contains some fixes for warnings which pop up when
CONFIG_NET_9P_DEBUG is disabled.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Julia Lawall [Wed, 22 Oct 2008 23:44:00 +0000 (16:44 -0700)]
PCI hotplug: fix logic in Compaq hotplug controller bus speed setup
The pattern !E && !E->fld is nonsensical. The patch below updates this
according to the assumption that && should be ||. But perhaps another
solution was intended.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
commit 3d137310245e4cdc3e8c8ba1bea2e145a87ae8e3 ("PCI: allow quirks to be
compiled out") introduced CONFIG_PCI_QUIRKS, which now shows up in each
and every .config. Fix this by making it depend on PCI.
Kenji Kaneshige [Wed, 22 Oct 2008 05:31:44 +0000 (14:31 +0900)]
PCI hotplug: pciehp: poll data link layer link active
This patch adds polling mechanism for Data Link Layer Link Active bit
after turning power on, instead of waiting for 1000 msec. This reduces
reduce the unnecessary long wait.
Some firmware fail to properly configure P2P bridges, leaving them
with invalid bus numbers. In some cases, this happens on some embedded
4xx boards as the result of the kernel allocating different bus space
than the firmware does to host bridges while not setting
pcibios_assign_all_busses() for various reasons. In other cases, it can
just be bogus firmware.
This adds some sanity checking to the PCI probing code. If a bridge is
found whose primary bus number doesn't match the bus it's sitting on,
or whose secondary bus number not strictly above it's primary bus
number, then the bridge bus numbers are deconfigured in the first pass
of pci_scan_bridge() to be re-assigned in the second pass.
Alex Chiang [Mon, 20 Oct 2008 23:42:03 +0000 (17:42 -0600)]
PCI Hotplug: fakephp: add duplicate slot name debugging
The PCI core now manages slot names on behalf of slot detection
and slot hotplug drivers, including the handling of duplicate
slot names.
We can use the fakephp driver to help test the new functionality.
Add a 'dup_slots' module param to force fakephp to create multiple
slots with the same name. We can then verify that the PCI core
correctly renamed the slots.
Alex Chiang [Mon, 20 Oct 2008 23:41:58 +0000 (17:41 -0600)]
PCI: Hotplug core: remove 'name'
Now that the PCI core manages the 'name' for each individual
hotplug driver, and all drivers (except rpaphp) have been converted
to use hotplug_slot_name(), there is no need for the PCI hotplug
core to drag around its own copy of name either.
We no longer need to manage our version of hotplug_slot->name
since the PCI and hotplug core manage it on our behalf.
Update the sn_hp_slot_private_alloc() interface to fill in
the correct name for us, as that function already has all
the parameters needed to determine the name.
Alex Chiang [Mon, 20 Oct 2008 23:41:43 +0000 (17:41 -0600)]
PCI: rpaphp: kmalloc/kfree slot->name directly
rpaphp tends to use slot->name directly everywhere, and doesn't
ever need slot->hotplug_slot->name.
struct hotplug_slot->name is going away, so convert rpaphp directly
manipulate its own slot->name everywhere, and don't bother touching
slot->hotplug_slot->name.
Alex Chiang [Mon, 20 Oct 2008 23:41:07 +0000 (17:41 -0600)]
PCI, PCI Hotplug: introduce slot_name helpers
In preparation for cleaning up the various hotplug drivers
such that they don't have to manage their own 'name' parameters
anymore, we provide the following convenience functions:
pci_slot_name()
hotplug_slot_name()
These helpers will be used by individual hotplug drivers.
Alex Chiang [Mon, 20 Oct 2008 23:41:02 +0000 (17:41 -0600)]
PCI: prevent duplicate slot names
Prevent callers of pci_create_slot() from registering slots with
duplicate names. This condition occurs most often when PCI hotplug
drivers are loaded on platforms with broken firmware that assigns
identical names to multiple slots.
We now rename these duplicate slots on behalf of the user.
If firmware assigns the name N to multiple slots, then:
The first registered slot is assigned N
The second registered slot is assigned N-1
The third registered slot is assigned N-2
etc.
This is the permanent fix mentioned in earlier commits d6a9e9b4 and 167e782e (shpchp/pciehp: Rename duplicate slot name...).
We take advantage of the new 'hotplug' parameter in pci_create_slot()
to prevent a slot create/rename race between hotplug drivers and
detection drivers.
The hotplug driver creates the slot with its desired name, and then
releases the semaphore. Now, the detection driver tries to create
the same slot, but it already exists. We don't care about renaming,
so return the existing slot.
The detection driver creates the slot with name "X". Then the hotplug
driver tries to create the same slot, but wants the name "Y" instead.
We detect that we're trying to create the same slot and that we also
want a rename, so rename the slot to "Y" and return.
Two separate hotplug drivers are attempting to claim the slot and
are passing valid hotplug_slot args to pci_create_slot(). We detect
that the slot already has a ->hotplug callback, prevent a rename,
and return -EBUSY.
Alex Chiang [Mon, 20 Oct 2008 23:40:52 +0000 (17:40 -0600)]
PCI: update pci_create_slot() to take a 'hotplug' param
Slot detection drivers can co-exist with hotplug drivers. The names
of the detected/claimed slots may be different depending on module
load order.
For legacy reasons, we need to allow hotplug drivers to override
the slot name if a detection driver is loaded first (and they find
the same slots).
Creating and overriding slot names should be an atomic operation,
otherwise you get a locking nightmare as various drivers race to
call pci_create_slot().
pci_create_slot() is already serialized by grabbing the pci_bus_sem.
We update the API and add a 'hotplug' param, which is:
set if the caller is a hotplug driver
NULL if the caller is a detection driver
pci_create_slot() does not actually use the 'hotplug' parameter in this
patch. A later patch will add the logic that uses it.
Update pci_hp_register() to take a const char *name parameter.
The motivation for this is to clean up the individual hotplug
drivers so that each one does not have to manage its own name.
The PCI core should be the place where we manage the name.
We update the interface and all callsites first, in a
"no functional change" manner, and clean up the drivers later.
Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Jesse Barnes [Tue, 21 Oct 2008 19:01:27 +0000 (12:01 -0700)]
Remove PCI hotplug core MAINTAINERS entry
Per discussion w/Kristen at the LPC PCI BoF, the core hotplug code doesn't
really need a separate maintainer, so remove the entry (but leave the driver
specific ones).
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Jesse Barnes [Tue, 21 Oct 2008 17:09:05 +0000 (10:09 -0700)]
PCI: include io.h in pci.h so that ioremap_nocache is defined
Ingo pointed out that the m32r build was broken by pci_ioremap. It looks like
some files include pci.h w/o including io.h. The latter defines ioremap_* if
present, so it makes sense to include it in pci.h now that we have pci_ioremap
there.
Sheng Yang [Tue, 21 Oct 2008 09:38:25 +0000 (17:38 +0800)]
PCI: add support for function level reset
Sometimes, it's necessary to enable software's ability to quiesce and
reset endpoint hardware with function-level granularity, so provide
support for it.
The patch implement Function Level Reset(FLR) feature following PCI-e
spec. And this is the first step. We would add more generic method, like
D0/D3, to allow more devices support this function.
The patch contains two functions. pcie_reset_function() is the new
driver API, and, contains some action to quiesce a device. The other
function is a helper: pcie_execute_reset_function() just executes the
reset for a particular device function.
Current the usage model is in KVM. Function reset is necessary for
assigning device to a guest, or moving it between partitions.
For Function Level Reset(FLR), please refer to PCI Express spec chapter
6.6.2.
Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Matthew Wilcox [Tue, 21 Oct 2008 01:13:08 +0000 (19:13 -0600)]
PCI: Fix reference counting bug
pci_get_subsys() will decrement the reference count of the device that
it starts searching from. Unfortunately, the pci_find_device() interface
will already have decremented the reference count of the device earlier,
so the device will end up losing all reference counts and be freed.
We can fix this by incrementing the reference count of the device to
start searching from before calling pci_get_subsys().
Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Taku Izumi [Fri, 17 Oct 2008 04:51:53 +0000 (13:51 +0900)]
ACPI/PCI: Fix return value of acpi_cuery_osc()
If acpi_query_osc() returns other than AE_OK, __pci_osc_support_set()
stops scanning ACPI objects to evaluate _OSC. This prevents subsequent
_OSCs from being evaluated if some of root bridge doesn't have _OSC, for
example. So acpi_query_osc() should return always AE_OK to evaluate all
_OSC.
Taku Izumi [Fri, 17 Oct 2008 04:51:00 +0000 (13:51 +0900)]
ACPI/PCI: Always query _OSC control field in pci_osc_control_set()
In current pci_osc_control_set() implementation, once the _OSC control
field is queried, it is never queried again. But the query result can
change depending on the _OSC support field. For example, if PCI Express
Native Hot Plug control depends on ASPM support on a certain platform, a
PCI Express Native Hot Plug Control query would fail before the ASPM
driver was loaded, but it would succeed if the ASPM driver was loaded
first. Therefore, pci_osc_control_set() should query the _OSC control
field every time.
Taku Izumi [Fri, 17 Oct 2008 04:49:46 +0000 (13:49 +0900)]
ACPI/PCI: Change pci_osc_control_set() to query control bits first
Current pci_osc_control_set() evaluates _OSC without query for control
bits, unless __pci_osc_support_set() is called beforehand. But as
strongly recommended in PCI firmware specification, it should query
control bits first.
This patch changes pci_osc_control_set() to query control bits first
even if __pci_osc_support_set() is not called beforehand.
Stefan Roscher [Wed, 22 Oct 2008 22:54:38 +0000 (15:54 -0700)]
IB/ehca: Reject dynamic memory add/remove when ehca adapter is present
Since the ehca device driver does not support dynamic memory add and
remove operations, the driver must explicitly reject such requests in
order to prevent unpredictable behaviors related to existing memory
regions that cover all of memory being used by InfiniBand protocols in
the kernel.
The solution (for now at least) is to add a memory notifier to the
ehca device driver and if a request for dynamic memory add or remove
comes in, ehca will always reject it. The user can add or remove
memory by hot-removing the ehca adapter, performing the memory
operation, and then hot-adding the ehca adapter back.
Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Stefan Roscher [Wed, 22 Oct 2008 22:52:31 +0000 (15:52 -0700)]
IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter
Because ehca adapters can differ in the maximum number of QPs and CQs
we have to save the maximum number of these ressources per adapter and
not globally per ehca driver. This fix introduces 2 new members to the
shca structure to store the maximum value for QPs and CQs per adapter.
The module parameters are now used as initial values for those
variables. If a user selects an invalid number of CQs or QPs we don't
print an error any longer, instead we will inform the user with a
warning and set the values to the respective maximum supported by the
HW.
Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Or Gerlitz [Wed, 22 Oct 2008 22:49:49 +0000 (15:49 -0700)]
IPoIB: Set netdev offload features properly for child (VLAN) interfaces
Child devices were created without any offload features set, fix this by
moving the code that computes the features into generic function which is
now called through non-child and child device creation.
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
-- v1 has a bug where the 'result' flag in ipoib_vlan_add may be used uninitialized Signed-off-by: Roland Dreier <rolandd@cisco.com>
Yevgeny Petrilin [Wed, 22 Oct 2008 22:47:49 +0000 (15:47 -0700)]
mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC
The Mellanox ConnectX can operate as an InfiniBand adapter, as an
Ethernet NIC, or as a Fibre Channel (FC) HBA. The kernel has a
low-level driver, mlx4_core, which handles multiplexing access to the
device, and there is also already an InfiniBad driver, mlx4_ib.
This patch adds a new driver, mlx4_en, which implements a standard
Ethernet NIC driver.
Yevgeny Petrilin [Wed, 22 Oct 2008 22:38:42 +0000 (15:38 -0700)]
mlx4_core: Multiple port type support
Multi-protocol adapters support different port types. Each consumer
of mlx4_core queries for supported port types; in particular mlx4_ib
can no longer assume that all physical ports belong to it. Port type
is configured through a sysfs interface. When the type of a port is
changed, all mlx4 interfaces are unregistered, and then registered
again with the new port types.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Arjan van de Ven [Wed, 22 Oct 2008 18:21:32 +0000 (20:21 +0200)]
i2c: Use pci_ioremap_bar()
Use the newly introduced pci_ioremap_bar() function in drivers/i2c.
pci_ioremap_bar() just takes a pci device and a bar number, with the goal
of making it really hard to get wrong, while also having a central place
to stick sanity checks.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Wed, 22 Oct 2008 18:21:32 +0000 (20:21 +0200)]
i2c: Clean up <linux/i2c.h>
Fix most checkpatch.pl errors and warnings. This includes replacing
spaces with tabs in many places, adding and removing spaces, and
folding long lines.
Also complete a couple prototypes to make it clearer what the
parameters represent.
Jean Delvare [Wed, 22 Oct 2008 18:21:32 +0000 (20:21 +0200)]
i2c: Update and clean up writing-clients document
* Strip trailing white space.
* Remove out-of-date or irrelevant parts.
* Insist on the fact that command is deprecated.
* Fix spelling mistakes and typos.
* Reformat code examples and function prototypes to comply with the
kernel coding style.
Jean Delvare [Wed, 22 Oct 2008 18:21:30 +0000 (20:21 +0200)]
i2c: Delete outdated client porting guide
The document describing how to port i2c chip drivers from Linux 2.4 to
Linux 2.6 is outdated. As I suspect that most drivers that had to be
ported have already been by now, I do not want to spend time updating
it. Let's just delete it instead.
projects / linux-2.6-omap-h63xx.git / log