From: Mark Brown Date: Tue, 7 Apr 2009 22:37:37 +0000 (-0700) Subject: OMAP: Don't warn user about expected behaviour in mmc-twl4030 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?p=linux-2.6-omap-h63xx.git;a=commitdiff_plain;h=afe98e6d6d7396f1ebb421b7e2b0f11912e62733 OMAP: Don't warn user about expected behaviour in mmc-twl4030 The approach that's being taken by the mmc-twl4030 driver to disabling regulators is a normal and supported one so there is no need to print messages on the console warning about this - their system is functioning normally. Signed-off-by: Mark Brown Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index cb56fe270ab..46d6e9bcadf 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -136,14 +136,11 @@ static int twl_mmc_late_init(struct device *dev) * (which is safe for MMC, but not in general). */ if (regulator_is_enabled(hsmmc[i].vcc) > 0) { - dev_warn(dev, "APPLY REGULATOR HACK for vmmc\n"); regulator_enable(hsmmc[i].vcc); regulator_disable(hsmmc[i].vcc); } if (hsmmc[i].vcc_aux) { if (regulator_is_enabled(reg) > 0) { - dev_warn(dev, "APPLY REGULATOR HACK " - "for vmmc_aux\n"); regulator_enable(reg); regulator_disable(reg); }