From: Johannes Berg Date: Mon, 17 Nov 2008 09:59:59 +0000 (+0100) Subject: mac80211: remove ieee80211_notify_mac X-Git-Tag: v2.6.28-rc6~8^2~4^2~1 X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?p=linux-2.6-omap-h63xx.git;a=commitdiff_plain;h=8e3bad65a59915f2ddc40f62a180ad81695d8440 mac80211: remove ieee80211_notify_mac Before ieee80211_notify_mac() was added, it was presented with the use case of using it to tell mac80211 that the association may have been lost because the firmware crashed/reset. Since then, it has also been used by iwlwifi to (slightly) speed up re-association after resume, a workaround around the fact that mac80211 has no suspend/resume handling yet. It is also not used by any other drivers, so clearly it cannot be necessary for "good enough" suspend/resume. Unfortunately, the callback suffers from a severe problem: It only works for station mode. If suspend/resume happens while in IBSS or any other mode (but station), then the callback is pointless. Recently, it has created a number of locking issues, first because it required rtnl locking rather than RCU due to calling sleeping functions within the critical section, and now because it's called by iwlwifi from the mac80211 workqueue that may not use the rtnl because it is flushed under rtnl. (cf. http://bugzilla.kernel.org/show_bug.cgi?id=12046) I think, therefore, that we should take a step back, remove it entirely for now and add the small feature it provided properly. For suspend and resume we will need to introduce new hooks, and for the case where the firmware was reset the driver will probably simply just pretend it has done a suspend/resume cycle to get mac80211 to reprogram the hardware completely, not just try to connect to the current AP again in station mode. When doing so, we will need to take into account locking issues and possibly defer to schedule_work from within mac80211 for the resume operation, while the suspend operation must be done directly. Proper suspend/resume should also not necessarily try to reconnect to the current AP, the time spent in suspend may have been short enough to not be disconnected from the AP, mac80211 will detect that the AP went out of range quickly if it did, and if the association is lost then the AP will disassoc as soon as a data frame is sent. We might also take into account WWOL then, and have mac80211 program the hardware into such a mode where it is available and requested. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 8d690a0eb1a..6751bb2b8ae 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2341,7 +2341,6 @@ static void iwl_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl_alive_start(priv); mutex_unlock(&priv->mutex); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl4965_bg_rf_kill(struct work_struct *work) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 285b53e7e26..45a6b0c3569 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6012,7 +6012,6 @@ static void iwl3945_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl3945_alive_start(priv); mutex_unlock(&priv->mutex); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl3945_bg_rf_kill(struct work_struct *work) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8856e2d60e9..73d81bc6aa7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -73,14 +73,6 @@ * not do so then mac80211 may add this under certain circumstances. */ -/** - * enum ieee80211_notification_type - Low level driver notification - * @IEEE80211_NOTIFY_RE_ASSOC: start the re-association sequence - */ -enum ieee80211_notification_types { - IEEE80211_NOTIFY_RE_ASSOC, -}; - /** * struct ieee80211_ht_bss_info - describing BSS's HT characteristics * @@ -1797,18 +1789,6 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid); void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, u16 tid); -/** - * ieee80211_notify_mac - low level driver notification - * @hw: pointer as obtained from ieee80211_alloc_hw(). - * @notif_type: enum ieee80211_notification_types - * - * This function must be called by low level driver to inform mac80211 of - * low level driver status change or force mac80211 to re-assoc for low - * level driver internal error that require re-assoc. - */ -void ieee80211_notify_mac(struct ieee80211_hw *hw, - enum ieee80211_notification_types notif_type); - /** * ieee80211_find_sta - find a station * diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 14d165f0df7..409bb771623 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2560,25 +2560,3 @@ void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) ieee80211_restart_sta_timer(sdata); rcu_read_unlock(); } - -/* driver notification call */ -void ieee80211_notify_mac(struct ieee80211_hw *hw, - enum ieee80211_notification_types notif_type) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct ieee80211_sub_if_data *sdata; - - switch (notif_type) { - case IEEE80211_NOTIFY_RE_ASSOC: - rtnl_lock(); - list_for_each_entry(sdata, &local->interfaces, list) { - if (sdata->vif.type != NL80211_IFTYPE_STATION) - continue; - - ieee80211_sta_req_auth(sdata, &sdata->u.sta); - } - rtnl_unlock(); - break; - } -} -EXPORT_SYMBOL(ieee80211_notify_mac);