From: Andrea Paterniani <a.paterniani@swapp-eng.it>
Date: Wed, 19 Nov 2008 23:36:26 +0000 (-0800)
Subject: spi_imx: full duplex dma corruption bugfix
X-Git-Tag: v2.6.28-rc6~35
X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?p=linux-2.6-omap-h63xx.git;a=commitdiff_plain;h=3b45d6380c392e402adc460e4ccf7d41e0caf82a

spi_imx: full duplex dma corruption bugfix

Fix unsafe order in dma mapping operation: always flush data from the
cache *BEFORE* invalidating it, to allow full duplex transfers where the
same buffer may be used for both writes and reads.

Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---

diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 61ba147e384..0b4db0ce78d 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -506,20 +506,6 @@ static int map_dma_buffers(struct driver_data *drv_data)
 	if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
 		return -1;
 
-	/* NULL rx means write-only transfer and no map needed
-	   since rx DMA will not be used */
-	if (drv_data->rx) {
-		buf = drv_data->rx;
-		drv_data->rx_dma = dma_map_single(
-					dev,
-					buf,
-					drv_data->len,
-					DMA_FROM_DEVICE);
-		if (dma_mapping_error(dev, drv_data->rx_dma))
-			return -1;
-		drv_data->rx_dma_needs_unmap = 1;
-	}
-
 	if (drv_data->tx == NULL) {
 		/* Read only message --> use drv_data->dummy_dma_buf for dummy
 		   writes to achive reads */
@@ -533,18 +519,31 @@ static int map_dma_buffers(struct driver_data *drv_data)
 					buf,
 					drv_data->tx_map_len,
 					DMA_TO_DEVICE);
-	if (dma_mapping_error(dev, drv_data->tx_dma)) {
-		if (drv_data->rx_dma) {
-			dma_unmap_single(dev,
-					drv_data->rx_dma,
-					drv_data->len,
-					DMA_FROM_DEVICE);
-			drv_data->rx_dma_needs_unmap = 0;
-		}
+	if (dma_mapping_error(dev, drv_data->tx_dma))
 		return -1;
-	}
 	drv_data->tx_dma_needs_unmap = 1;
 
+	/* NULL rx means write-only transfer and no map needed
+	 * since rx DMA will not be used */
+	if (drv_data->rx) {
+		buf = drv_data->rx;
+		drv_data->rx_dma = dma_map_single(dev,
+						buf,
+						drv_data->len,
+						DMA_FROM_DEVICE);
+		if (dma_mapping_error(dev, drv_data->rx_dma)) {
+			if (drv_data->tx_dma) {
+				dma_unmap_single(dev,
+						drv_data->tx_dma,
+						drv_data->tx_map_len,
+						DMA_TO_DEVICE);
+				drv_data->tx_dma_needs_unmap = 0;
+			}
+			return -1;
+		}
+		drv_data->rx_dma_needs_unmap = 1;
+	}
+
 	return 0;
 }