X-Git-Url: http://www.pilppa.org/gitweb/gitweb.cgi?p=linux-2.6-omap-h63xx.git;a=blobdiff_plain;f=drivers%2Fbluetooth%2Fhci_h4p%2Fuart.c;fp=drivers%2Fbluetooth%2Fhci_h4p%2Fuart.c;h=1b75a4204dd60a1a1649b4f4b6e465ec9e2023e3;hp=0000000000000000000000000000000000000000;hb=0d5f2216edfeb9904e0d6512f803b0f93871baaf;hpb=14fc69723d3442ef46f8f82b3f481e82f06a346d

diff --git a/drivers/bluetooth/hci_h4p/uart.c b/drivers/bluetooth/hci_h4p/uart.c
new file mode 100644
index 00000000000..1b75a4204dd
--- /dev/null
+++ b/drivers/bluetooth/hci_h4p/uart.c
@@ -0,0 +1,164 @@
+/*
+ * This file is part of hci_h4p bluetooth driver
+ *
+ * Copyright (C) 2005, 2006 Nokia Corporation.
+ *
+ * Contact: Ville Tervo <ville.tervo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+
+#include "hci_h4p.h"
+
+inline void hci_h4p_outb(struct hci_h4p_info *info, unsigned int offset, u8 val)
+{
+	outb(val, info->uart_base + (offset << 2));
+}
+
+inline u8 hci_h4p_inb(struct hci_h4p_info *info, unsigned int offset)
+{
+	return inb(info->uart_base + (offset << 2));
+}
+
+void hci_h4p_set_rts(struct hci_h4p_info *info, int active)
+{
+	u8 b;
+
+	b = hci_h4p_inb(info, UART_MCR);
+	if (active)
+		b |= UART_MCR_RTS;
+	else
+		b &= ~UART_MCR_RTS;
+	hci_h4p_outb(info, UART_MCR, b);
+}
+
+int hci_h4p_wait_for_cts(struct hci_h4p_info *info, int active,
+			 int timeout_ms)
+{
+	int okay;
+	unsigned long timeout;
+
+	okay = 0;
+	timeout = jiffies + msecs_to_jiffies(timeout_ms);
+	for (;;) {
+		int state;
+
+		state = hci_h4p_inb(info, UART_MSR) & UART_MSR_CTS;
+		if (active) {
+			if (state)
+				return 0;
+		} else {
+			if (!state)
+				return 0;
+		}
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+	}
+}
+
+void __hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which)
+{
+	u8 lcr, b;
+
+	lcr = hci_h4p_inb(info, UART_LCR);
+	hci_h4p_outb(info, UART_LCR, 0xbf);
+	b = hci_h4p_inb(info, UART_EFR);
+	if (on)
+		b |= which;
+	else
+		b &= ~which;
+	hci_h4p_outb(info, UART_EFR, b);
+	hci_h4p_outb(info, UART_LCR, lcr);
+}
+
+void hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock, flags);
+	__hci_h4p_set_auto_ctsrts(info, on, which);
+	spin_unlock_irqrestore(&info->lock, flags);
+}
+
+void hci_h4p_change_speed(struct hci_h4p_info *info, unsigned long speed)
+{
+	unsigned int divisor;
+	u8 lcr, mdr1;
+
+	NBT_DBG("Setting speed %lu\n", speed);
+
+	if (speed >= 460800) {
+		divisor = UART_CLOCK / 13 / speed;
+		mdr1 = 3;
+	} else {
+		divisor = UART_CLOCK / 16 / speed;
+		mdr1 = 0;
+	}
+
+	hci_h4p_outb(info, UART_OMAP_MDR1, 7); /* Make sure UART mode is disabled */
+	lcr = hci_h4p_inb(info, UART_LCR);
+	hci_h4p_outb(info, UART_LCR, UART_LCR_DLAB);     /* Set DLAB */
+	hci_h4p_outb(info, UART_DLL, divisor & 0xff);    /* Set speed */
+	hci_h4p_outb(info, UART_DLM, divisor >> 8);
+	hci_h4p_outb(info, UART_LCR, lcr);
+	hci_h4p_outb(info, UART_OMAP_MDR1, mdr1); /* Make sure UART mode is enabled */
+}
+
+int hci_h4p_reset_uart(struct hci_h4p_info *info)
+{
+	int count = 0;
+
+	/* Reset the  UART */
+	hci_h4p_outb(info, UART_OMAP_SYSC, UART_SYSC_OMAP_RESET);
+	while (!(hci_h4p_inb(info, UART_OMAP_SYSS) & UART_SYSS_RESETDONE)) {
+		if (count++ > 100) {
+			dev_err(info->dev, "hci_h4p: UART reset timeout\n");
+			return -ENODEV;
+		}
+		udelay(1);
+	}
+
+	return 0;
+}
+
+int hci_h4p_init_uart(struct hci_h4p_info *info)
+{
+	int err;
+
+	err = hci_h4p_reset_uart(info);
+	if (err < 0)
+		return err;
+
+	/* Enable and setup FIFO */
+	hci_h4p_outb(info, UART_LCR, UART_LCR_WLEN8);
+	hci_h4p_outb(info, UART_OMAP_MDR1, 0x00); /* Make sure UART mode is enabled */
+	hci_h4p_outb(info, UART_OMAP_SCR, 0x80);
+	hci_h4p_outb(info, UART_EFR, UART_EFR_ECB);
+	hci_h4p_outb(info, UART_MCR, UART_MCR_TCRTLR);
+	hci_h4p_outb(info, UART_TI752_TLR, 0x1f);
+	hci_h4p_outb(info, UART_TI752_TCR, 0xef);
+	hci_h4p_outb(info, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+		     UART_FCR_CLEAR_XMIT | UART_FCR_R_TRIG_00);
+	hci_h4p_outb(info, UART_IER, UART_IER_RDI);
+
+	return 0;
+}