h63xx: tsc2101 alsa sound support

[linux-2.6-omap-h63xx.git] / sound / oss / Kconfig

diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 953e5f3ea03d6bb990584f58bed059b6f8420c25..74cbb833a0c39cd4ca4cc63360780337ad068578 100644 (file)
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -4,9 +4,53 @@
 # More hacking for modularisation.
 #
 # Prompt user for primary drivers.
+
+config SOUND_OMAP
+       tristate "OMAP Sound Driver"
+       depends on SOUND_PRIME!=n && SOUND && ARCH_OMAP
+       ---help---
+         OMAP Audio driver
+
+config SOUND_OMAP_TSC2101
+       tristate "TSC2101 Stereo Codec"
+       depends on SOUND_OMAP && ( MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4 || MACH_OMAP_APOLLON || MACH_OMAP_H6300)
+       select OMAP_TSC2101 if ( MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H6300 )
+       select OMAP_UWIRE if ARCH_OMAP1
+       ---help---
+         Tsc2101 Audio Codec Driver for OMAP will be enabled.
+         Will also Enable the following:
+         case OMAP1:
+         1. uWire Driver based on Platform
+         2. TSC2101 Glue driver
+         case OMAP2:
+         1. McSPI Driver based on Platform
+         2. TSC2101 Glue driver
+
+config SOUND_OMAP_AIC23
+       tristate "AIC23 Stereo Codec"
+       depends on SOUND_OMAP && ( MACH_OMAP_INNOVATOR || MACH_OMAP_OSK )
+       select SENSORS_TLV320AIC23 if ARCH_OMAP
+       ---help---
+         AIC23 Audio Codec Driver for OMAP will be enabled.
+         Additionally, AIC23 I2C support is enabled.
+
+config OBSOLETE_OSS_DRIVER
+       bool "Obsolete OSS drivers"
+       depends on SOUND_PRIME
+       help
+         This option enables support for obsolete OSS drivers that
+         are scheduled for removal in the near future since there
+         are ALSA drivers for the same hardware.
+
+         Please contact Adrian Bunk <bunk@stusta.de> if you had to
+         say Y here because your soundcard is not properly supported
+         by ALSA.
+
+         If unsure, say N.
+
 config SOUND_BT878
        tristate "BT878 audio dma"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        ---help---
          Audio DMA support for bt878 based grabber boards.  As you might have
          already noticed, bt878 is listed with two functions in /proc/pci.
@@ -22,7 +66,7 @@ config SOUND_BT878
 
 config SOUND_CMPCI
        tristate "C-Media PCI (CMI8338/8738)"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        help
          Say Y or M if you have a PCI sound card using the CMI8338
          or the CMI8738 chipset.  Data on these chips are available at
@@ -61,7 +105,7 @@ config SOUND_CMPCI_JOYSTICK
 
 config SOUND_EMU10K1
        tristate "Creative SBLive! (EMU10K1)"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        ---help---
          Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
          such as the Creative SBLive!, SB PCI512 or Emu-APS.
@@ -95,7 +139,7 @@ config SOUND_FUSION
 
 config SOUND_CS4281
        tristate "Crystal Sound CS4281"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        help
          Picture and feature list at
          <http://www.pcbroker.com/crystal4281.html>.
@@ -112,7 +156,7 @@ config SOUND_BCM_CS4297A
 
 config SOUND_ES1370
        tristate "Ensoniq AudioPCI (ES1370)"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        help
          Say Y or M if you have a PCI sound card utilizing the Ensoniq
          ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
@@ -125,7 +169,7 @@ config SOUND_ES1370
 
 config SOUND_ES1371
        tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        help
          Say Y or M if you have a PCI sound card utilizing the Ensoniq
          ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
@@ -138,7 +182,7 @@ config SOUND_ES1371
 
 config SOUND_ESSSOLO1
        tristate "ESS Technology Solo1" 
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        help
          Say Y or M if you have a PCI sound card utilizing the ESS Technology
          Solo1 chip. To find out if your sound card uses a
@@ -149,7 +193,7 @@ config SOUND_ESSSOLO1
 
 config SOUND_MAESTRO
        tristate "ESS Maestro, Maestro2, Maestro2E driver"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        help
          Say Y or M if you have a sound system driven by ESS's Maestro line
          of PCI sound chips.  These include the Maestro 1, Maestro 2, and
@@ -158,7 +202,7 @@ config SOUND_MAESTRO
 
 config SOUND_MAESTRO3
        tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
-       depends on SOUND_PRIME && PCI && EXPERIMENTAL
+       depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER
        help
          Say Y or M if you have a sound system driven by ESS's Maestro 3
          PCI sound chip.
@@ -172,14 +216,14 @@ config SOUND_ICH
 
 config SOUND_HARMONY
        tristate "PA Harmony audio driver"
-       depends on GSC_LASI && SOUND_PRIME
+       depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER
        help
          Say 'Y' or 'M' to include support for Harmony soundchip
          on HP 712, 715/new and many other GSC based machines.
 
 config SOUND_SONICVIBES
        tristate "S3 SonicVibes"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        help
          Say Y or M if you have a PCI sound card utilizing the S3
          SonicVibes chipset. To find out if your sound card uses a
@@ -218,7 +262,7 @@ config SOUND_VRC5477
 
 config SOUND_AU1000
        tristate "Au1000 Sound"
-       depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500)
+       depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER
 
 config SOUND_AU1550_AC97
        tristate "Au1550 AC97 Sound"
@@ -492,7 +536,7 @@ config MSND_FIFOSIZE
 
 config SOUND_VIA82CXXX
        tristate "VIA 82C686 Audio Codec"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        help
          Say Y here to include support for the audio codec found on VIA
          82Cxxx-based chips. Typically these are built into a motherboard.
@@ -563,7 +607,7 @@ config SOUND_AD1889
 
 config SOUND_SGALAXY
        tristate "Aztech Sound Galaxy (non-PnP) cards"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
        help
          This module initializes the older non Plug and Play sound galaxy
          cards from Aztech. It supports the Waverider Pro 32 - 3D and the
@@ -599,7 +643,7 @@ config SOUND_ACI_MIXER
 
 config SOUND_CS4232
        tristate "Crystal CS4232 based (PnP) cards"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
        help
          Say Y here if you have a card based on the Crystal CS4232 chip set,
          which uses its own Plug and Play protocol.
@@ -613,7 +657,7 @@ config SOUND_CS4232
 
 config SOUND_SSCAPE
        tristate "Ensoniq SoundScape support"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
        help
          Answer Y if you have a sound card based on the Ensoniq SoundScape
          chipset. Such cards are being manufactured at least by Ensoniq, Spea
@@ -625,7 +669,7 @@ config SOUND_SSCAPE
 
 config SOUND_GUS
        tristate "Gravis Ultrasound support"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
        help
          Say Y here for any type of Gravis Ultrasound card, including the GUS
          or GUS MAX.  See also <file:Documentation/sound/oss/ultrasound> for more
@@ -727,7 +771,7 @@ config SOUND_MPU401
 
 config SOUND_NM256
        tristate "NM256AV/NM256ZX audio support"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
        help
          Say M here to include audio support for the NeoMagic 256AV/256ZX
          chipsets. These are the audio chipsets found in the Sony
@@ -739,7 +783,7 @@ config SOUND_NM256
 
 config SOUND_MAD16
        tristate "OPTi MAD16 and/or Mozart based cards"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
        ---help---
          Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
          82C928 or 82C929 or 82C931) audio interface chip. These chips are
@@ -860,7 +904,7 @@ config SOUND_SB
 
 config SOUND_AWE32_SYNTH
        tristate "AWE32 synth"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
        help
          Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
          similar sound card. See <file:Documentation/sound/oss/README.awe>,
@@ -870,7 +914,7 @@ config SOUND_AWE32_SYNTH
 
 config SOUND_WAVEFRONT
        tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
-       depends on SOUND_OSS && m
+       depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER
        help
          Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
          and read the files <file:Documentation/sound/oss/Wavefront> and
@@ -878,7 +922,7 @@ config SOUND_WAVEFRONT
 
 config SOUND_MAUI
        tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
        help
          Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
          sound card.
@@ -904,7 +948,7 @@ config MAUI_BOOT_FILE
 
 config SOUND_YM3812
        tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
        ---help---
          Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
          Answering Y is usually a safe and recommended choice, however some
@@ -920,7 +964,7 @@ config SOUND_YM3812
 
 config SOUND_OPL3SA1
        tristate "Yamaha OPL3-SA1 audio controller"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
        help
          Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
          usually built into motherboards. Read
@@ -946,7 +990,7 @@ config SOUND_OPL3SA2
 
 config SOUND_YMFPCI
        tristate "Yamaha YMF7xx PCI audio (native mode)"
-       depends on SOUND_OSS && PCI
+       depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER
        help
          Support for Yamaha cards including the YMF711, YMF715, YMF718,
          YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
@@ -1088,11 +1132,11 @@ config SOUND_KAHLUA
 
 config SOUND_ALI5455
        tristate "ALi5455 audio support"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
 
 config SOUND_FORTE
        tristate "ForteMedia FM801 driver"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        help
          Say Y or M if you want driver support for the ForteMedia FM801 PCI
          audio controller (Abit AU10, Genius Sound Maker, HP Workstation
@@ -1100,7 +1144,7 @@ config SOUND_FORTE
 
 config SOUND_RME96XX
        tristate "RME Hammerfall (RME96XX) support"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
        help
          Say Y or M if you have a Hammerfall or Hammerfall light
          multichannel card from RME. If you want to access advanced
@@ -1108,7 +1152,7 @@ config SOUND_RME96XX
 
 config SOUND_AD1980
        tristate "AD1980 front/back switch plugin"
-       depends on SOUND_PRIME
+       depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER
 
 config SOUND_SH_DAC_AUDIO
        tristate "SuperH DAC audio support"