--- /dev/null
+/*
+ * LCD panel support for the TI OMAP P2 board
+ *
+ * Authors:
+ * jekyll <jekyll@mail.jekyll.idv.tw>
+ * B Jp <lastjp_fr@yahoo.fr>
+ * Brian Swetland <swetland@android.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/omapfb.h>
+
+/*
+ * File: epson-md-tft.h
+ *
+ * This file contains definitions for Epsons MD-TF LCD Module
+ *
+ * Copyright (C) 2004 MPC-Data Limited (http://www.mpc-data.co.uk)
+ * Author: Dave Peverley <dpeverley at mpc-data.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Please report all bugs and problems to the author.
+ *
+ */
+
+/* LCD uWire commands & params
+ * All values from Epson
+ */
+#define LCD_DISON 0xAF
+#define LCD_DISOFF 0xAE
+#define LCD_DISNOR 0xA6
+#define LCD_DISINV 0xA7
+#define LCD_DISCTL 0xCA
+#define LCD_GCP64 0xCB
+#define LCD_GCP16 0xCC
+#define LCD_GSSET 0xCD
+#define LCD_SLPIN 0x95
+#define LCD_SLPOUT 0x94
+#define LCD_SD_PSET 0x75
+#define LCD_MD_PSET 0x76
+#define LCD_SD_CSET 0x15
+#define LCD_MD_CSET 0x16
+#define LCD_DATCTL 0xBC
+#define LCD_RAMWR 0x5C
+#define LCD_RAMRD 0x5D
+#define LCD_PTLIN 0xA8
+#define LCD_PTLOUT 0xA9
+#define LCD_ASCSET 0xAA
+#define LCD_SCSTART 0xAB
+#define LCD_VOLCTL 0xC6
+#define LCD_NOP 0x25
+#define LCD_OSCISEL 0x7
+#define LCD_3500KSET 0xD1
+#define LCD_3500KEND 0xD2
+#define LCD_14MSET 0xD3
+#define LCD_14MEND 0xD4
+
+#define INIT_3500KSET 0x45
+#define INIT_14MSET 0x4B
+#define INIT_DATCTL 0x08 /* 6.6.6 bits for D-Sample */
+
+#define INIT_OSCISEL 0x05
+
+#define INIT_VOLCTL 0x77 /* Nominel "volume" */
+
+#define INIT_VOLCTL_Ton 0x98 /* Activate power-IC timer */
+#define INIT_GSSET 0x00
+
+const unsigned short INIT_DISCTL[11] =
+{
+ 0xDE, 0x01, 0x64, 0x00, 0x1B, 0xF4, 0x00, 0xDC, 0x00, 0x02, 0x00
+};
+
+const unsigned short INIT_GCP64[126] =
+{
+ 0x3B,0x00,0x42,0x00,0x4A,0x00,0x51,0x00,
+ 0x58,0x00,0x5F,0x00,0x66,0x00,0x6E,0x00,
+ 0x75,0x00,0x7C,0x00,0x83,0x00,0x8A,0x00,
+ 0x92,0x00,0x99,0x00,0xA0,0x00,0xA7,0x00,
+ 0xAE,0x00,0xB6,0x00,0xBD,0x00,0xC4,0x00,
+ 0xCB,0x00,0xD2,0x00,0xDA,0x00,0xE1,0x00,
+ 0xE8,0x00,0xEF,0x00,0xF6,0x00,0xFE,0x00,
+ 0x05,0x01,0x0C,0x01,0x13,0x01,0x1A,0x01,
+ 0x22,0x01,0x29,0x01,0x30,0x01,0x37,0x01,
+ 0x3E,0x01,0x46,0x01,0x4D,0x01,0x54,0x01,
+ 0x5B,0x01,0x62,0x01,0x6A,0x01,0x71,0x01,
+ 0x78,0x01,0x7F,0x01,0x86,0x01,0x8E,0x01,
+ 0x95,0x01,0x9C,0x01,0xA3,0x01,0xAA,0x01,
+ 0xB2,0x01,0xB9,0x01,0xC0,0x01,0xC7,0x01,
+ 0xCE,0x01,0xD6,0x01,0xDD,0x01,0xE4,0x01,
+ 0xEB,0x01,0xF2,0x01,0xFA,0x01
+};
+
+const unsigned short INIT_GCP16[15] =
+{
+ 0x1A,0x31,0x48,0x54,0x5F,0x67,0x70,0x76,0x7C,0x80,0x83,0x84,0x85,0x87,0x96
+};
+
+const unsigned short INIT_MD_PSET[4] = { 0, 0, 219, 0 };
+const unsigned short INIT_MD_CSET[4] = { 2, 0, 177, 0 };
+
+const unsigned short INIT_SD_PSET[4] = { 0x00, 0x01, 0x00, 0x01 };
+const unsigned short INIT_SD_CSET[4] = { 0x00, 0x02, 0x00, 0x02 };
+
+const unsigned short INIT_ASCSET[7] = { 0x00, 0x00, 0xDB, 0x00, 0xDC, 0x00, 0x01 };
+const unsigned short INIT_SCSTART[2] = { 0x00, 0x00 };
+
+/* ----- end of epson_md_tft.h ----- */
+
+
+#include "../drivers/ssi/omap-uwire.h"
+
+#define LCD_UWIRE_CS 0
+
+static int p2_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
+{
+ return 0;
+}
+
+static void p2_panel_cleanup(struct lcd_panel *panel)
+{
+}
+
+static int p2_panel_enable(struct lcd_panel *panel)
+{
+ int i;
+ unsigned long value;
+
+ /* thwack the reset line */
+ gpio_direction_output(19, 0);
+ mdelay(2);
+ gpio_set_value(19, 1);
+
+ /* bits 31:28 -> 0 LCD_PXL_15 .. 12 */
+ value = omap_readl(OMAP730_IO_CONF_3) & 0x0FFFFFFF;
+ omap_writel(value, OMAP730_IO_CONF_3);
+
+ /* bits 19:0 -> 0 LCD_VSYNC, AC, PXL_0, PCLK, HSYNC,
+ ** PXL_9..1, PXL_10, PXL_11
+ */
+ value = omap_readl(OMAP730_IO_CONF_4) & 0xFFF00000;
+ omap_writel(value, OMAP730_IO_CONF_4);
+
+ omap_uwire_configure_mode(0,16);
+
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_DISOFF, 9, 0,NULL,1);
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_SLPIN, 9, 0,NULL,1);
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_DISNOR, 9, 0,NULL,1);
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_GSSET, 9, 0,NULL,1);
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_GSSET | 0x100), 9, 0,NULL,1);
+
+ /* DISCTL */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_DISCTL, 9, 0,NULL,1);
+ for (i = 0; i < (sizeof(INIT_DISCTL)/sizeof(unsigned short)); i++)
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_DISCTL[i] | 0x100), 9, 0,NULL,1);
+
+ /* GCP64 */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_GCP64, 9, 0,NULL,1);
+ for (i = 0; i < (sizeof(INIT_GCP64)/sizeof(unsigned short)); i++)
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_GCP64[i] | 0x100), 9, 0,NULL,1);
+
+ /* GCP16 */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_GCP16, 9, 0,NULL,1);
+ for (i = 0; i < (sizeof(INIT_GCP16)/sizeof(unsigned short)); i++)
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_GCP16[i] | 0x100), 9, 0,NULL,1);
+
+ /* MD_CSET */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_MD_CSET, 9, 0,NULL,1);
+ for (i = 0; i < (sizeof(INIT_MD_CSET)/sizeof(unsigned short)); i++)
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_MD_CSET[i] | 0x100), 9, 0,NULL,1);
+
+ /* MD_PSET */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_MD_PSET, 9, 0,NULL,1);
+ for (i = 0; i < (sizeof(INIT_MD_PSET)/sizeof(unsigned short)); i++)
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_MD_PSET[i] | 0x100), 9, 0,NULL,1);
+
+ /* SD_CSET */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_SD_CSET, 9, 0,NULL,1);
+ for (i = 0; i < (sizeof(INIT_SD_CSET)/sizeof(unsigned short)); i++)
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_SD_CSET[i] | 0x100), 9, 0,NULL,1);
+
+ /* SD_PSET */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_SD_PSET, 9, 0,NULL,1);
+ for (i = 0; i < (sizeof(INIT_SD_PSET)/sizeof(unsigned short)); i++)
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_SD_PSET[i] | 0x100), 9, 0,NULL,1);
+
+ /* DATCTL */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_DATCTL, 9, 0,NULL,1);
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_DATCTL | 0x100), 9, 0,NULL,1);
+
+ /* OSSISEL = d'5 */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_OSCISEL, 9, 0,NULL,1);
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_OSCISEL | 0x100), 9, 0,NULL,1);
+
+ /* 14MSET = d'74 */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_14MSET, 9, 0,NULL,1);
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_14MSET | 0x100), 9, 0,NULL,1);
+
+ /* 14MEND */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_14MEND, 9, 0,NULL,1);
+
+ /* 3500KSET = d'69 */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_3500KSET, 9, 0,NULL,1);
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_3500KSET | 0x100), 9, 0,NULL,1);
+
+ /* 3500KEND */
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_3500KEND, 9, 0,NULL,1);
+
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_SLPOUT, 9, 0,NULL,1);
+
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_VOLCTL, 9, 0,NULL,1);
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_VOLCTL_Ton | 0x100), 9, 0,NULL,1);
+
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_VOLCTL, 9, 0,NULL,1);
+
+ omap_uwire_data_transfer(LCD_UWIRE_CS, (INIT_VOLCTL | 0x100), 9, 0,NULL,1);
+
+ omap_uwire_data_transfer(LCD_UWIRE_CS, LCD_DISON, 9, 0,NULL,1);
+
+ /* enable backlight */
+ gpio_direction_output(134, 1);
+
+ return 0;
+}
+
+static void p2_panel_disable(struct lcd_panel *panel)
+{
+}
+
+static unsigned long p2_panel_get_caps(struct lcd_panel *panel)
+{
+ return 0;
+}
+
+struct lcd_panel p2_panel = {
+ .name = "p2",
+ .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_PIX_CLOCK,
+
+ .bpp = 16,
+ .data_lines = 16,
+ .x_res = 176,
+ .y_res = 220,
+ .pixel_clock = 12500,
+ .hsw = 5,
+ .hfp = 1,
+ .hbp = 1,
+ .vsw = 2,
+ .vfp = 12,
+ .vbp = 1,
+
+ .init = p2_panel_init,
+ .cleanup = p2_panel_cleanup,
+ .enable = p2_panel_enable,
+ .disable = p2_panel_disable,
+ .get_caps = p2_panel_get_caps,
+};
+
+static int p2_panel_probe(struct platform_device *pdev)
+{
+ omapfb_register_panel(&p2_panel);
+ return 0;
+}
+
+static int p2_panel_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int p2_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ return 0;
+}
+
+static int p2_panel_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+struct platform_driver p2_panel_driver = {
+ .probe = p2_panel_probe,
+ .remove = p2_panel_remove,
+ .suspend = p2_panel_suspend,
+ .resume = p2_panel_resume,
+ .driver = {
+ .name = "lcd_p2",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int p2_panel_drv_init(void)
+{
+ return platform_driver_register(&p2_panel_driver);
+}
+
+static void p2_panel_drv_cleanup(void)
+{
+ platform_driver_unregister(&p2_panel_driver);
+}
+
+module_init(p2_panel_drv_init);
+module_exit(p2_panel_drv_cleanup);
+
projects / linux-2.6-omap-h63xx.git / blobdiff