--- /dev/null
+/*
+ * TSC2301 driver
+ *
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tsc2301.h>
+
+u16 tsc2301_read_reg(struct tsc2301 *tsc, int reg)
+{
+ struct spi_transfer t[2];
+ struct spi_message m;
+ u16 data = 0, cmd;
+
+ cmd = reg;
+ cmd |= 0x8000;
+
+ memset(t, 0, sizeof(t));
+ spi_message_init(&m);
+ m.spi = tsc->spi;
+
+ t[0].tx_buf = &cmd;
+ t[0].rx_buf = NULL;
+ t[0].len = 2;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = NULL;
+ t[1].rx_buf = &data;
+ t[1].len = 2;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(m.spi, &m);
+
+ return data;
+}
+
+void tsc2301_write_reg(struct tsc2301 *tsc, int reg, u16 val)
+{
+ struct spi_transfer t;
+ struct spi_message m;
+ u16 data[2];
+
+ /* Now we prepare the command for transferring */
+ data[0] = reg;
+ data[1] = val;
+
+ spi_message_init(&m);
+ m.spi = tsc->spi;
+
+ memset(&t, 0, sizeof(t));
+ t.tx_buf = data;
+ t.rx_buf = NULL;
+ t.len = 4;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(m.spi, &m);
+}
+
+void tsc2301_write_kbc(struct tsc2301 *tsc, int val)
+{
+ u16 w;
+
+ w = tsc->config2_shadow;
+ w &= ~(0x03 << 14);
+ w |= (val & 0x03) << 14;
+ tsc2301_write_reg(tsc, TSC2301_REG_CONFIG2, w);
+ tsc->config2_shadow = w;
+}
+
+void tsc2301_write_pll(struct tsc2301 *tsc,
+ int pll_n, int pll_a, int pll_pdc, int pct_e, int pll_o)
+{
+ u16 w;
+
+ w = tsc->config2_shadow;
+ w &= ~0x3fff;
+ w |= (pll_n & 0x0f) | ((pll_a & 0x0f) << 4) | ((pll_pdc & 0x0f) << 8);
+ w |= pct_e ? (1 << 12) : 0;
+ w |= pll_o ? (1 << 13) : 0;
+ tsc2301_write_reg(tsc, TSC2301_REG_CONFIG2, w);
+ tsc->config2_shadow = w;
+}
+
+void tsc2301_read_buf(struct tsc2301 *tsc, int reg, u16 *rx_buf, int len)
+{
+ struct spi_transfer t[2];
+ struct spi_message m;
+ u16 cmd, i;
+
+ cmd = reg;
+ cmd |= 0x8000;
+
+ spi_message_init(&m);
+ m.spi = tsc->spi;
+
+ memset(t, 0, sizeof(t));
+ t[0].tx_buf = &cmd;
+ t[0].rx_buf = NULL;
+ t[0].len = 2;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = NULL;
+ t[1].rx_buf = rx_buf;
+ t[1].len = 2 * len;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(m.spi, &m);
+
+ for (i = 0; i < len; i++)
+ printk(KERN_DEBUG "rx_buf[%d]: %04x\n", i, rx_buf[i]);
+}
+
+static int __devinit tsc2301_probe(struct spi_device *spi)
+{
+ struct tsc2301 *tsc;
+ struct tsc2301_platform_data *pdata = spi->dev.platform_data;
+ int r;
+ u16 w;
+
+ if (!pdata) {
+ dev_dbg(&spi->dev, "no platform data?\n");
+ return -ENODEV;
+ }
+
+ tsc = kzalloc(sizeof(*tsc), GFP_KERNEL);
+ if (tsc == NULL)
+ return -ENOMEM;
+
+ dev_set_drvdata(&spi->dev, tsc);
+ tsc->spi = spi;
+
+ tsc->enable_clock = pdata->enable_clock;
+ tsc->disable_clock = pdata->disable_clock;
+
+ if (pdata->reset_gpio >= 0) {
+ tsc->reset_gpio = pdata->reset_gpio;
+ r = gpio_request(tsc->reset_gpio, "TSC2301 reset");
+ if (r < 0)
+ goto err1;
+ gpio_direction_output(tsc->reset_gpio, 1);
+ mdelay(1);
+ gpio_set_value(tsc->reset_gpio, 0);
+ } else
+ tsc->reset_gpio = -1;
+
+ spi->mode = SPI_MODE_1;
+ spi->bits_per_word = 16;
+ /* The max speed might've been defined by the board-specific
+ * struct */
+ if (!spi->max_speed_hz)
+ spi->max_speed_hz = TSC2301_HZ;
+ spi_setup(spi);
+
+ /* Soft reset */
+ tsc2301_write_reg(tsc, TSC2301_REG_RESET, 0xbb00);
+ msleep(1);
+
+ w = tsc2301_read_reg(tsc, TSC2301_REG_ADC);
+ if (!(w & (1 << 14))) {
+ dev_err(&spi->dev, "invalid ADC reg value: %04x\n", w);
+ r = -ENODEV;
+ goto err1;
+ }
+
+ w = tsc2301_read_reg(tsc, TSC2301_REG_DAC);
+ if (!(w & (1 << 15))) {
+ dev_err(&spi->dev, "invalid DAC reg value: %04x\n", w);
+ r = -ENODEV;
+ goto err1;
+ }
+
+ /* Stop keypad scanning */
+ tsc2301_write_reg(tsc, TSC2301_REG_KEY, 0x4000);
+
+ /* We have to cache this for read-modify-write, since we can't
+ * read back BIT15 */
+ w = tsc2301_read_reg(tsc, TSC2301_REG_CONFIG2);
+ /* By default BIT15 is set */
+ w |= 1 << 15;
+ tsc->config2_shadow = w;
+
+ r = tsc2301_kp_init(tsc, pdata);
+ if (r)
+ goto err1;
+ r = tsc2301_ts_init(tsc, pdata);
+ if (r)
+ goto err2;
+ return 0;
+
+ tsc2301_ts_exit(tsc);
+err2:
+ tsc2301_kp_exit(tsc);
+err1:
+ kfree(tsc);
+ return r;
+}
+
+static int __devexit tsc2301_remove(struct spi_device *spi)
+{
+ struct tsc2301 *tsc = dev_get_drvdata(&spi->dev);
+
+ tsc2301_ts_exit(tsc);
+ tsc2301_kp_exit(tsc);
+ if (tsc->reset_gpio >= 0)
+ gpio_free(tsc->reset_gpio);
+ kfree(tsc);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tsc2301_suspend(struct spi_device *spi, pm_message_t mesg)
+{
+ struct tsc2301 *tsc = dev_get_drvdata(&spi->dev);
+ int r;
+
+ if ((r = tsc2301_kp_suspend(tsc)) < 0)
+ return r;
+ if ((r = tsc2301_ts_suspend(tsc)) < 0) {
+ tsc2301_kp_resume(tsc);
+ return r;
+ }
+
+ return 0;
+}
+
+static int tsc2301_resume(struct spi_device *spi)
+{
+ struct tsc2301 *tsc = dev_get_drvdata(&spi->dev);
+
+ tsc2301_ts_resume(tsc);
+ tsc2301_kp_resume(tsc);
+
+ return 0;
+}
+#endif
+
+static struct spi_driver tsc2301_driver = {
+ .driver = {
+ .name = "tsc2301",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+#ifdef CONFIG_PM
+ .suspend = tsc2301_suspend,
+ .resume = tsc2301_resume,
+#endif
+ .probe = tsc2301_probe,
+ .remove = __devexit_p(tsc2301_remove),
+};
+
+static int __init tsc2301_init(void)
+{
+ printk("TSC2301 driver initializing\n");
+
+ return spi_register_driver(&tsc2301_driver);
+}
+module_init(tsc2301_init);
+
+static void __exit tsc2301_exit(void)
+{
+ spi_unregister_driver(&tsc2301_driver);
+}
+module_exit(tsc2301_exit);
+
+MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>");
+MODULE_LICENSE("GPL");
projects / linux-2.6-omap-h63xx.git / blobdiff