--- /dev/null
+/*
+ * linux/drivers/i2c/chips/twl4030-power.c
+ *
+ * Handle TWL4030 Power initialization
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2006 Texas Instruments, Inc
+ *
+ * Written by Kalle Jokiniemi
+ * Peter De Schrijver <peter.de-schrijver@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+static u8 triton_next_free_address = 0x2b;
+
+#define PWR_P1_SW_EVENTS 0x10
+#define PWR_DEVOFF (1<<0)
+
+#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
+#define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b)
+
+#define NUM_OF_RESOURCES 28
+
+/* resource - hfclk */
+#define R_HFCLKOUT_DEV_GRP PHY_TO_OFF_PM_RECEIVER(0xe6)
+
+/* PM events */
+#define R_P1_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x46)
+#define R_P2_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x47)
+#define R_P3_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x48)
+#define R_CFG_P1_TRANSITION PHY_TO_OFF_PM_MASTER(0x36)
+#define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37)
+#define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38)
+
+#define LVL_WAKEUP 0x08
+
+#define ENABLE_WARMRESET (1<<4)
+
+#define END_OF_SCRIPT 0x3f
+
+#define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55)
+#define R_SEQ_ADD_SA12 PHY_TO_OFF_PM_MASTER(0x56)
+#define R_SEQ_ADD_S2A3 PHY_TO_OFF_PM_MASTER(0x57)
+#define R_SEQ_ADD_WARM PHY_TO_OFF_PM_MASTER(0x58)
+#define R_MEMORY_ADDRESS PHY_TO_OFF_PM_MASTER(0x59)
+#define R_MEMORY_DATA PHY_TO_OFF_PM_MASTER(0x5a)
+
+#define R_PROTECT_KEY 0x0E
+#define KEY_1 0xC0
+#define KEY_2 0x0C
+
+/* resource configuration registers */
+
+#define DEVGROUP_OFFSET 0
+#define TYPE_OFFSET 1
+
+static u8 res_config_addrs[] = {
+ [RES_VAUX1] = 0x17,
+ [RES_VAUX2] = 0x1b,
+ [RES_VAUX3] = 0x1f,
+ [RES_VAUX4] = 0x23,
+ [RES_VMMC1] = 0x27,
+ [RES_VMMC2] = 0x2b,
+ [RES_VPLL1] = 0x2f,
+ [RES_VPLL2] = 0x33,
+ [RES_VSIM] = 0x37,
+ [RES_VDAC] = 0x3b,
+ [RES_VINTANA1] = 0x3f,
+ [RES_VINTANA2] = 0x43,
+ [RES_VINTDIG] = 0x47,
+ [RES_VIO] = 0x4b,
+ [RES_VDD1] = 0x55,
+ [RES_VDD2] = 0x63,
+ [RES_VUSB_1V5] = 0x71,
+ [RES_VUSB_1V8] = 0x74,
+ [RES_VUSB_3V1] = 0x77,
+ [RES_VUSBCP] = 0x7a,
+ [RES_REGEN] = 0x7f,
+ [RES_NRES_PWRON] = 0x82,
+ [RES_CLKEN] = 0x85,
+ [RES_SYSEN] = 0x88,
+ [RES_HFCLKOUT] = 0x8b,
+ [RES_32KCLKOUT] = 0x8e,
+ [RES_RESET] = 0x91,
+ [RES_Main_Ref] = 0x94,
+};
+
+static int __init twl4030_write_script_byte(u8 address, u8 byte)
+{
+ int err;
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_MEMORY_ADDRESS);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte,
+ R_MEMORY_DATA);
+
+ return err;
+}
+
+static int __init twl4030_write_script_ins(u8 address, u16 pmb_message,
+ u8 delay, u8 next)
+{
+ int err = 0;
+
+ address *= 4;
+ err |= twl4030_write_script_byte(address++, pmb_message >> 8);
+ err |= twl4030_write_script_byte(address++, pmb_message & 0xff);
+ err |= twl4030_write_script_byte(address++, delay);
+ err |= twl4030_write_script_byte(address++, next);
+
+ return err;
+}
+
+static int __init twl4030_write_script(u8 address, struct twl4030_ins *script,
+ int len)
+{
+ int err = 0;
+
+ for (; len; len--, address++, script++) {
+ if (len == 1)
+ err |= twl4030_write_script_ins(address,
+ script->pmb_message,
+ script->delay,
+ END_OF_SCRIPT);
+ else
+ err |= twl4030_write_script_ins(address,
+ script->pmb_message,
+ script->delay,
+ address + 1);
+ }
+
+ return err;
+}
+
+static int __init config_wakeup3_sequence(u8 address)
+{
+
+ int err = 0;
+
+ /* Set SLEEP to ACTIVE SEQ address for P3 */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_S2A3);
+
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
+ R_P3_SW_EVENTS);
+ if (err)
+ printk(KERN_ERR "TWL4030 wakeup sequence for P3" \
+ "config error\n");
+
+ return err;
+}
+
+static int __init config_wakeup12_sequence(u8 address)
+{
+ int err = 0;
+
+ /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_SA12);
+
+ /* P1/P2/P3 LVL_WAKEUP should be on LEVEL */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
+ R_P1_SW_EVENTS);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
+ R_P2_SW_EVENTS);
+
+ if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) {
+ u8 data;
+ /* Disabling AC charger effect on sleep-active transitions */
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+ R_CFG_P1_TRANSITION);
+ data &= ~(1<<1);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data ,
+ R_CFG_P1_TRANSITION);
+ }
+
+ if (err)
+ printk(KERN_ERR "TWL4030 wakeup sequence for P1 and P2" \
+ "config error\n");
+
+ return err;
+}
+
+static int __init config_sleep_sequence(u8 address)
+{
+ int err = 0;
+
+ /*
+ * CLKREQ is pulled high on the 2430SDP, therefore, we need to take
+ * it out of the HFCLKOUT DEV_GRP for P1 else HFCLKOUT can't be stopped.
+ */
+
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ 0x20, R_HFCLKOUT_DEV_GRP);
+
+ /* Set ACTIVE to SLEEP SEQ address in T2 memory*/
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_A2S);
+
+ if (err)
+ printk(KERN_ERR "TWL4030 sleep sequence config error\n");
+
+ return err;
+}
+
+static int __init config_warmreset_sequence(u8 address)
+{
+
+ int err = 0;
+ u8 rd_data;
+
+ /* Set WARM RESET SEQ address for P1 */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_WARM);
+
+ /* P1/P2/P3 enable WARMRESET */
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P1_SW_EVENTS);
+ rd_data |= ENABLE_WARMRESET;
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P1_SW_EVENTS);
+
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P2_SW_EVENTS);
+ rd_data |= ENABLE_WARMRESET;
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P2_SW_EVENTS);
+
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P3_SW_EVENTS);
+ rd_data |= ENABLE_WARMRESET;
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P3_SW_EVENTS);
+
+ if (err)
+ printk(KERN_ERR
+ "TWL4030 warmreset seq config error\n");
+ return err;
+}
+
+void twl4030_configure_resource(struct twl4030_resconfig *rconfig)
+{
+ int rconfig_addr;
+ u8 type;
+
+ if (rconfig->resource > NUM_OF_RESOURCES) {
+ printk(KERN_ERR
+ "TWL4030 Resource %d does not exist\n",
+ rconfig->resource);
+ return;
+ }
+
+ rconfig_addr = res_config_addrs[rconfig->resource];
+
+ /* Set resource group */
+
+ if (rconfig->devgroup >= 0)
+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ rconfig->devgroup << 5,
+ rconfig_addr + DEVGROUP_OFFSET);
+
+ /* Set resource types */
+
+ if (twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER,
+ &type,
+ rconfig_addr + TYPE_OFFSET) < 0) {
+ printk(KERN_ERR
+ "TWL4030 Resource %d type could not read\n",
+ rconfig->resource);
+ return;
+ }
+
+ if (rconfig->type >= 0) {
+ type &= ~7;
+ type |= rconfig->type;
+ }
+
+ if (rconfig->type2 >= 0) {
+ type &= ~(3 << 3);
+ type |= rconfig->type2 << 3;
+ }
+
+ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ type, rconfig_addr + TYPE_OFFSET);
+
+}
+
+static int __init load_triton_script(struct twl4030_script *tscript)
+{
+ u8 address = triton_next_free_address;
+ int err;
+
+ err = twl4030_write_script(address, tscript->script, tscript->size);
+ if (err)
+ return err;
+
+ triton_next_free_address += tscript->size;
+
+ if (tscript->flags & TRITON_WRST_SCRIPT)
+ err |= config_warmreset_sequence(address);
+
+ if (tscript->flags & TRITON_WAKEUP12_SCRIPT)
+ err |= config_wakeup12_sequence(address);
+
+ if (tscript->flags & TRITON_WAKEUP3_SCRIPT)
+ err |= config_wakeup3_sequence(address);
+
+ if (tscript->flags & TRITON_SLEEP_SCRIPT)
+ err |= config_sleep_sequence(address);
+
+ return err;
+}
+
+void __init twl4030_power_init(struct twl4030_power_data *triton2_scripts)
+{
+ int err = 0;
+ int i;
+ struct twl4030_resconfig *resconfig;
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_1,
+ R_PROTECT_KEY);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_2,
+ R_PROTECT_KEY);
+ if (err)
+ printk(KERN_ERR
+ "TWL4030 Unable to unlock registers\n");
+
+ for (i = 0; i < triton2_scripts->size; i++) {
+ err = load_triton_script(triton2_scripts->scripts[i]);
+ if (err)
+ break;
+ }
+
+ resconfig = triton2_scripts->resource_config;
+ if (resconfig) {
+ while (resconfig->resource) {
+ twl4030_configure_resource(resconfig);
+ resconfig++;
+ }
+ }
+
+ if (twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY))
+ printk(KERN_ERR
+ "TWL4030 Unable to relock registers\n");
+}
projects / linux-2.6-omap-h63xx.git / blobdiff