Merge branch 'omap-pool'

[linux-2.6-omap-h63xx.git] / drivers / leds / Kconfig

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 5c34aef3e9a2f029ce13fb1c6699c2489c023b36..788f48cf921a6c2cb319bdffd3ac4a5dae629e03 100644 (file)
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -31,6 +31,13 @@ config LEDS_LOCOMO
          This option enables support for the LEDs on Sharp Locomo.
          Zaurus models SL-5500 and SL-5600.
 
+config LEDS_MIKROTIK_RB532
+       tristate "LED Support for Mikrotik Routerboard 532"
+       depends on LEDS_CLASS && MIKROTIK_RB532
+       help
+         This option enables support for the so called "User LED" of
+         Mikrotik's Routerboard 532.
+
 config LEDS_S3C24XX
        tristate "LED Support for Samsung S3C24XX GPIO LEDs"
        depends on LEDS_CLASS && ARCH_S3C2410
@@ -115,7 +122,7 @@ config LEDS_HP6XX
        tristate "LED Support for the HP Jornada 6xx"
        depends on LEDS_CLASS && SH_HP6XX
        help
-         This option enables led support for the handheld
+         This option enables LED support for the handheld
          HP Jornada 620/660/680/690.
 
 config LEDS_PCA9532
@@ -123,7 +130,7 @@ config LEDS_PCA9532
        depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
        help
          This option enables support for NXP pca9532
-         led controller. It is generally only usefull
+         LED controller. It is generally only useful
          as a platform driver
 
 config LEDS_GPIO
@@ -132,7 +139,36 @@ config LEDS_GPIO
        help
          This option enables support for the LEDs connected to GPIO
          outputs. To be useful the particular board must have LEDs
-         and they must be connected to the GPIO lines.
+         and they must be connected to the GPIO lines.  The LEDs must be
+         defined as platform devices and/or OpenFirmware platform devices.
+         The code to use these bindings can be selected below.
+
+config LEDS_GPIO_PLATFORM
+       bool "Platform device bindings for GPIO LEDs"
+       depends on LEDS_GPIO
+       default y
+       help
+         Let the leds-gpio driver drive LEDs which have been defined as
+         platform devices.  If you don't know what this means, say yes.
+
+config LEDS_GPIO_OF
+       bool "OpenFirmware platform device bindings for GPIO LEDs"
+       depends on LEDS_GPIO && OF_DEVICE
+       default y
+       help
+         Let the leds-gpio driver drive LEDs which have been defined as
+         of_platform devices.  For instance, LEDs which are listed in a "dts"
+         file.
+
+config LEDS_LP5521
+       tristate "LED Support for the LP5521 LEDs"
+       depends on LEDS_CLASS && I2C
+       help
+         If you say 'Y' here you get support for the National Semiconductor
+         LP5521 LED driver used in n8x0 boards.
+
+         This driver can be built as a module by choosing 'M'. The module
+         will be called leds-lp5521.
 
 config LEDS_LP5521
        tristate "LED Support for the LP5521 LEDs"
@@ -145,8 +181,8 @@ config LEDS_LP5521
          will be called leds-lp5521.
 
 config LEDS_CLEVO_MAIL
-       tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
-       depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
+       tristate "Mail LED on Clevo notebook"
+       depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
        help
          This driver makes the mail LED accessible from userspace
          programs through the leds subsystem. This LED have three
@@ -169,7 +205,7 @@ config LEDS_CLEVO_MAIL
                Positivo Mobile (Clevo M5x0V)
 
          If your model is not listed here you can try the "nodetect"
-         module paramter.
+         module parameter.
 
          To compile this driver as a module, choose M here: the
          module will be called leds-clevo-mail.
@@ -189,6 +225,26 @@ config LEDS_DA903X
          This option enables support for on-chip LED drivers found
          on Dialog Semiconductor DA9030/DA9034 PMICs.
 
+config LEDS_DAC124S085
+       tristate "LED Support for DAC124S085 SPI DAC"
+       depends on LEDS_CLASS && SPI
+       help
+         This option enables support for DAC124S085 SPI DAC from NatSemi,
+         which can be used to control up to four LEDs.
+
+config LEDS_PWM
+       tristate "PWM driven LED Support"
+       depends on LEDS_CLASS && HAVE_PWM
+       help
+         This option enables support for pwm driven LEDs
+
+config LEDS_BD2802
+       tristate "LED driver for BD2802 RGB LED"
+       depends on LEDS_CLASS && I2C
+       help
+         This option enables support for BD2802GU RGB LED driver chips
+         accessed via the I2C bus.
+
 comment "LED Triggers"
 
 config LEDS_TRIGGERS
@@ -234,6 +290,19 @@ config LEDS_TRIGGER_BACKLIGHT
 
          If unsure, say N.
 
+config LEDS_TRIGGER_GPIO
+       tristate "LED GPIO Trigger"
+       depends on LEDS_TRIGGERS
+       depends on GPIOLIB
+       help
+         This allows LEDs to be controlled by gpio events. It's good
+         when using gpios as switches and triggering the needed LEDs
+         from there. One use case is n810's keypad LEDs that could
+         be triggered by this trigger when user slides up to show
+         keypad.
+
+         If unsure, say N.
+
 config LEDS_TRIGGER_DEFAULT_ON
        tristate "LED Default ON Trigger"
        depends on LEDS_TRIGGERS