remove twl4030-pwrirq.c

[linux-2.6-omap-h63xx.git] / drivers / i2c / chips / twl4030-usb.c

diff --git a/drivers/i2c/chips/twl4030-usb.c b/drivers/i2c/chips/twl4030-usb.c
index 7852dca4a6dd9e2d46702422cc6e3d2597a79d50..46538ed93b2590f469f62705fedeb7aa6abbac5d 100644 (file)
--- a/drivers/i2c/chips/twl4030-usb.c
+++ b/drivers/i2c/chips/twl4030-usb.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/time.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
@@ -409,23 +410,9 @@ static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
        }
 }
 
-static void usb_irq_enable(struct twl4030_usb *twl, int rising, int falling)
+static void usb_irq_enable(struct twl4030_usb *twl, int trigger)
 {
-       u8 val;
-
-       /* FIXME use set_irq_type(...) when that (soon) works */
-
-       /* edge setup */
-       WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
-                               &val, REG_PWR_EDR1) < 0);
-
-       val &= ~(USB_PRES_RISING | USB_PRES_FALLING);
-       if (rising)
-               val = val | USB_PRES_RISING;
-       if (falling)
-               val = val | USB_PRES_FALLING;
-       WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT,
-                               val, REG_PWR_EDR1) < 0);
+       set_irq_type(twl->irq, trigger);
 
        if (!twl->irq_enabled) {
                enable_irq(twl->irq);
@@ -469,7 +456,7 @@ static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
 
        if (!controller_off)
                /* enable rising edge interrupt to detect cable attach */
-               usb_irq_enable(twl, 1, 0);
+               usb_irq_enable(twl, IRQ_TYPE_EDGE_RISING);
 
        twl4030_phy_power(twl, 0);
        twl->asleep = 1;
@@ -481,7 +468,7 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
                return;
 
        /* enable falling edge interrupt to detect cable detach */
-       usb_irq_enable(twl, 0, 1);
+       usb_irq_enable(twl, IRQ_TYPE_EDGE_FALLING);
 
        twl4030_phy_power(twl, 1);
        twl4030_i2c_access(twl, 1);