]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - arch/arm/plat-omap/include/mach/eac.h
Extra omap code in linux-omap tree
[linux-2.6-omap-h63xx.git] / arch / arm / plat-omap / include / mach / eac.h
diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h
deleted file mode 100644 (file)
index 9e62cf0..0000000
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach2/eac.h
- *
- * Defines for Enhanced Audio Controller
- *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
- *
- * Copyright (C) 2006 Nokia Corporation
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
-#define __ASM_ARM_ARCH_OMAP2_EAC_H
-
-#include <mach/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <sound/core.h>
-
-/* master codec clock source */
-#define EAC_MCLK_EXT_MASK      0x100
-enum eac_mclk_src {
-       EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
-       EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
-       EAC_MCLK_EXT_12288000,
-       EAC_MCLK_EXT_2x11289600,
-       EAC_MCLK_EXT_2x12288000,
-};
-
-/* codec port interface mode */
-enum eac_codec_mode {
-       EAC_CODEC_PCM,
-       EAC_CODEC_AC97,
-       EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
-       EAC_CODEC_I2S_SLAVE,
-};
-
-/* configuration structure for I2S mode */
-struct eac_i2s_conf {
-       /* if enabled, then first data slot (left channel) is signaled as
-        * positive level of frame sync EAC.AC_FS */
-       unsigned        polarity_changed_mode:1;
-       /* if enabled, then serial data starts one clock cycle after the
-        * of EAC.AC_FS for first audio slot */
-       unsigned        sync_delay_enable:1;
-};
-
-/* configuration structure for EAC codec port */
-struct eac_codec {
-       enum eac_mclk_src       mclk_src;
-
-       enum eac_codec_mode     codec_mode;
-       union {
-               struct eac_i2s_conf     i2s;
-       } codec_conf;
-
-       int             default_rate; /* audio sampling rate */
-
-       int             (* set_power)(void *private_data, int dac, int adc);
-       int             (* register_controls)(void *private_data,
-                                             struct snd_card *card);
-       const char      *short_name;
-
-       void            *private_data;
-};
-
-/* structure for passing platform dependent data to the EAC driver */
-struct eac_platform_data {
-        int    (* init)(struct device *eac_dev);
-       void    (* cleanup)(struct device *eac_dev);
-       /* these callbacks are used to configure & control external MCLK
-        * source. NULL if not used */
-       int     (* enable_ext_clocks)(struct device *eac_dev);
-       void    (* disable_ext_clocks)(struct device *eac_dev);
-};
-
-extern void omap_init_eac(struct eac_platform_data *pdata);
-
-extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
-extern void eac_unregister_codec(struct device *eac_dev);
-
-extern int eac_set_mode(struct device *eac_dev, int play, int rec);
-
-#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */