Merge branch 'for-tony-mailbox'

[linux-2.6-omap-h63xx.git] / arch / arm / plat-omap / Kconfig

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index f6d30949b804989f6836936db151a4f25537b45e..2465aea097a63836ad8678dcea32483f6a135787 100644 (file)
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -15,6 +15,9 @@ config ARCH_OMAP1
 config ARCH_OMAP2
        bool "TI OMAP2"
 
+config ARCH_OMAP3
+       bool "TI OMAP3"
+
 endchoice
 
 comment "OMAP Feature Selections"
@@ -29,6 +32,61 @@ config OMAP_DEBUG_LEDS
        depends on OMAP_DEBUG_DEVICES
        default y if LEDS || LEDS_OMAP_DEBUG
 
+config OMAP_DEBUG_POWERDOMAIN
+       bool "Emit debug messages from powerdomain layer"
+       depends on ARCH_OMAP2 || ARCH_OMAP3
+       default n
+       help
+         Say Y here if you want to compile in powerdomain layer
+         debugging messages for OMAP2/3.   These messages can
+         provide more detail as to why some powerdomain calls
+         may be failing, and will also emit a descriptive message
+         for every powerdomain register write.  However, the
+         extra detail costs some memory.
+
+config OMAP_DEBUG_CLOCKDOMAIN
+       bool "Emit debug messages from clockdomain layer"
+       depends on ARCH_OMAP2 || ARCH_OMAP3
+       default n
+       help
+         Say Y here if you want to compile in clockdomain layer
+         debugging messages for OMAP2/3.   These messages can
+         provide more detail as to why some clockdomain calls
+         may be failing, and will also emit a descriptive message
+         for every clockdomain register write.  However, the
+         extra detail costs some memory.
+
+config OMAP_SMARTREFLEX
+       bool "SmartReflex support"
+       depends on ARCH_OMAP34XX && TWL4030_CORE
+       help
+         Say Y if you want to enable SmartReflex.
+
+         SmartReflex can perform continuous dynamic voltage
+         scaling around the nominal operating point voltage
+         according to silicon characteristics and operating
+         conditions. Enabling SmartReflex reduces power
+         consumption.
+
+         Please note, that by default SmartReflex is only
+         initialized. To enable the automatic voltage
+         compensation for VDD1 and VDD2, user must write 1 to
+         /sys/power/sr_vddX_autocomp, where X is 1 or 2.
+
+config OMAP_SMARTREFLEX_TESTING
+       bool "Smartreflex testing support"
+       depends on OMAP_SMARTREFLEX
+       default n
+       help
+         Say Y if you want to enable SmartReflex testing with SW hardcoded
+         NVALUES intead of E-fuse NVALUES set in factory silicon testing.
+
+         In some devices the E-fuse values have not been set, even though
+         SmartReflex modules are included. Using these hardcoded values set
+         in software, one can test the SmartReflex features without E-fuse.
+
+         WARNING: Enabling this option may cause your device to hang!
+
 config OMAP_RESET_CLOCKS
        bool "Reset unused clocks during boot"
        depends on ARCH_OMAP
@@ -41,6 +99,39 @@ config OMAP_RESET_CLOCKS
          probably do not want this option enabled until your
          device drivers work properly.
 
+config OMAP_BOOT_TAG
+       bool "OMAP bootloader information passing"
+        depends on ARCH_OMAP
+        default n
+        help
+          Say Y, if you have a bootloader which passes information
+          about your board and its peripheral configuration.
+
+config OMAP_BOOT_REASON
+       bool "Support for boot reason"
+        depends on OMAP_BOOT_TAG
+        default n
+        help
+          Say Y, if you want to have a procfs entry for reading the boot
+          reason in user-space.
+
+config OMAP_COMPONENT_VERSION
+       bool "Support for component version display"
+       depends on OMAP_BOOT_TAG && PROC_FS
+       default n
+       help
+         Say Y, if you want to have a procfs entry for reading component
+         versions (supplied by the bootloader) in user-space.
+
+config OMAP_GPIO_SWITCH
+       bool "GPIO switch support"
+        default n
+        help
+          Say Y, if you want to have support for reporting of GPIO
+          switches (e.g. cover switches) via sysfs. Your bootloader has
+          to provide information about the switches to the kernel via the
+          ATAG_BOARD mechanism if they're not defined by the board config.
+
 config OMAP_MUX
        bool "OMAP multiplexing support"
         depends on ARCH_OMAP
@@ -75,6 +166,14 @@ config OMAP_MCBSP
          Say Y here if you want support for the OMAP Multichannel
          Buffered Serial Port.
 
+config OMAP_MMU_FWK
+       bool "MMU framework support"
+       depends on ARCH_OMAP
+       default n
+       help
+         Say Y here if you want to use OMAP MMU framework support for
+         DSP, IVA1.0 and Camera in OMAP1/2.
+
 config OMAP_MBOX_FWK
        tristate "Mailbox framework support"
        depends on ARCH_OMAP
@@ -96,13 +195,13 @@ config OMAP_MPU_TIMER
 
 config OMAP_32K_TIMER
        bool "Use 32KHz timer"
-       depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+       depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
        help
          Select this option if you want to enable the OMAP 32KHz timer.
          This timer saves power compared to the OMAP_MPU_TIMER, and has
          support for no tick during idle. The 32KHz timer provides less
          intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-         currently only available for OMAP16XX and 24XX.
+         currently only available for OMAP16XX, 24XX and 34XX.
 
 endchoice
 
@@ -117,7 +216,7 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
        bool "Use dual-mode timer"
-       depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+       depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
        help
         Select this option if you want to use OMAP Dual-Mode timers.