--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/usb-ehci.c
+ *
+ * This file will contain the board specific details for the
+ * Synopsys EHCI host controller on OMAP3430
+ *
+ * Copyright (C) 2007 Texas Instruments
+ * Author: Vikram Pandita <vikram.pandita@ti.com>
+ *
+ * Generalization by:
+ * Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <asm/io.h>
+#include <mach/mux.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pm.h>
+#include <mach/usb.h>
+
+static struct resource ehci_resources[] = {
+ [0] = {
+ .start = OMAP34XX_HSUSB_HOST_BASE + 0x800,
+ .end = OMAP34XX_HSUSB_HOST_BASE + 0x800 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* general IRQ */
+ .start = INT_34XX_EHCI_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 ehci_dmamask = ~(u32)0;
+static struct platform_device ehci_device = {
+ .name = "ehci-omap",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = NULL,
+ },
+ .num_resources = ARRAY_SIZE(ehci_resources),
+ .resource = ehci_resources,
+};
+
+/* MUX settings for EHCI pins */
+/*
+ * setup_ehci_io_mux - initialize IO pad mux for USBHOST
+ */
+static void setup_ehci_io_mux(void)
+{
+#ifdef CONFIG_OMAP_EHCI_PHY_MODE
+ /* PHY mode of operation for board: 750-2083-001
+ * ISP1504 connected to Port1 and Port2
+ * Do Func Mux setting for 12-pin ULPI PHY mode
+ */
+
+ /* Port1 */
+ omap_cfg_reg(Y9_3430_USB1HS_PHY_STP);
+ omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK);
+ omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR);
+ omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT);
+ omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0);
+ omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1);
+ omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2);
+ omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3);
+ omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4);
+ omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5);
+ omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6);
+ omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7);
+
+ /* Port2 */
+ omap_cfg_reg(AA10_3430_USB2HS_PHY_STP);
+ omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK);
+ omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR);
+ omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT);
+ omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0);
+ omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1);
+ omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2);
+ omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3);
+ omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4);
+ omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5);
+ omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6);
+ omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7);
+
+#else
+ /* Set Func mux for :
+ * TLL mode of operation
+ * 12-pin ULPI SDR TLL mode for Port1/2/3
+ */
+
+ /* Port1 */
+ omap_cfg_reg(Y9_3430_USB1HS_TLL_STP);
+ omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK);
+ omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR);
+ omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT);
+ omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0);
+ omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1);
+ omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2);
+ omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3);
+ omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4);
+ omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5);
+ omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6);
+ omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7);
+
+ /* Port2 */
+ omap_cfg_reg(AA10_3430_USB2HS_TLL_STP);
+ omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK);
+ omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR);
+ omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT);
+ omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0);
+ omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1);
+ omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2);
+ omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3);
+ omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4);
+ omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5);
+ omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6);
+ omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7);
+
+ /* Port3 */
+ omap_cfg_reg(AB3_3430_USB3HS_TLL_STP);
+ omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK);
+ omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR);
+ omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT);
+ omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0);
+ omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1);
+ omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2);
+ omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3);
+ omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4);
+ omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5);
+ omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6);
+ omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7);
+#endif /* CONFIG_OMAP_EHCI_PHY_MODE */
+
+ return;
+}
+
+void __init usb_ehci_init(void)
+{
+ /* Setup Pin IO MUX for EHCI */
+ if (cpu_is_omap34xx())
+ setup_ehci_io_mux();
+
+ if (platform_device_register(&ehci_device) < 0) {
+ printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
+ return;
+ }
+}
+
+
projects / linux-2.6-omap-h63xx.git / blobdiff