[ARM] OMAP3 clock: avoid invalid FREQSEL values during DPLL rate rounding

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap2 / clock34xx.h

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 7ee131202625e5802b0bb1498fdf08e693b7bbf3..aadd296c05a2d230122192e399a0437491cca694 100644 (file)
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -268,6 +268,7 @@ static struct dpll_data dpll1_dd = {
        .idlest_reg     = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
        .idlest_mask    = OMAP3430_ST_MPU_CLK_MASK,
        .max_multiplier = OMAP3_MAX_DPLL_MULT,
+       .min_divider    = 1,
        .max_divider    = OMAP3_MAX_DPLL_DIV,
        .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
@@ -341,6 +342,7 @@ static struct dpll_data dpll2_dd = {
        .idlest_reg     = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
        .idlest_mask    = OMAP3430_ST_IVA2_CLK_MASK,
        .max_multiplier = OMAP3_MAX_DPLL_MULT,
+       .min_divider    = 1,
        .max_divider    = OMAP3_MAX_DPLL_DIV,
        .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
@@ -400,6 +402,7 @@ static struct dpll_data dpll3_dd = {
        .idlest_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
        .idlest_mask    = OMAP3430_ST_CORE_CLK_MASK,
        .max_multiplier = OMAP3_MAX_DPLL_MULT,
+       .min_divider    = 1,
        .max_divider    = OMAP3_MAX_DPLL_DIV,
        .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
@@ -591,6 +594,7 @@ static struct dpll_data dpll4_dd = {
        .idlest_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
        .idlest_mask    = OMAP3430_ST_PERIPH_CLK_MASK,
        .max_multiplier = OMAP3_MAX_DPLL_MULT,
+       .min_divider    = 1,
        .max_divider    = OMAP3_MAX_DPLL_DIV,
        .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
@@ -930,6 +934,7 @@ static struct dpll_data dpll5_dd = {
        .idlest_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
        .idlest_mask    = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
        .max_multiplier = OMAP3_MAX_DPLL_MULT,
+       .min_divider    = 1,
        .max_divider    = OMAP3_MAX_DPLL_DIV,
        .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };