#include "prm.h"
#include "prm-regbits-34xx.h"
-static void omap3_dpll_recalc(struct clk *clk);
-static void omap3_clkoutx2_recalc(struct clk *clk);
+static unsigned long omap3_dpll_recalc(struct clk *clk);
+static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
static void omap3_dpll_allow_idle(struct clk *clk);
static void omap3_dpll_deny_idle(struct clk *clk);
static u32 omap3_dpll_autoidle_read(struct clk *clk);
static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
/* Maximum DPLL multiplier, divider values for OMAP3 */
#define OMAP3_MAX_DPLL_MULT 2048
* DPLL5 supplies other peripheral clocks (USBHOST, USIM).
*/
+/* Forward declarations for DPLL bypass clocks */
+static struct clk dpll1_fck;
+static struct clk dpll2_fck;
+
/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
#define DPLL_LOW_POWER_STOP 0x1
#define DPLL_LOW_POWER_BYPASS 0x5
.name = "omap_32k_fck",
.ops = &clkops_null,
.rate = 32768,
- .flags = RATE_FIXED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
};
static struct clk secure_32k_fck = {
.name = "secure_32k_fck",
.ops = &clkops_null,
.rate = 32768,
- .flags = RATE_FIXED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
};
/* Virtual source clocks for osc_sys_ck */
.name = "virt_12m_ck",
.ops = &clkops_null,
.rate = 12000000,
- .flags = RATE_FIXED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
};
static struct clk virt_13m_ck = {
.name = "virt_13m_ck",
.ops = &clkops_null,
.rate = 13000000,
- .flags = RATE_FIXED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
};
static struct clk virt_16_8m_ck = {
.name = "virt_16_8m_ck",
.ops = &clkops_null,
.rate = 16800000,
- .flags = RATE_FIXED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
};
static struct clk virt_19_2m_ck = {
.name = "virt_19_2m_ck",
.ops = &clkops_null,
.rate = 19200000,
- .flags = RATE_FIXED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
};
static struct clk virt_26m_ck = {
.name = "virt_26m_ck",
.ops = &clkops_null,
.rate = 26000000,
- .flags = RATE_FIXED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
};
static struct clk virt_38_4m_ck = {
.name = "virt_38_4m_ck",
.ops = &clkops_null,
.rate = 38400000,
- .flags = RATE_FIXED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
};
static const struct clksel_rate osc_sys_12m_rates[] = {
.clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK,
.clksel = osc_sys_clksel,
/* REVISIT: deal with autoextclkmode? */
- .flags = RATE_FIXED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
.recalc = &omap2_clksel_recalc,
};
.clksel_reg = OMAP3430_PRM_CLKSRC_CTRL,
.clksel_mask = OMAP_SYSCLKDIV_MASK,
.clksel = sys_clksel,
- .flags = RATE_PROPAGATES,
.recalc = &omap2_clksel_recalc,
};
static struct clk sys_altclk = {
.name = "sys_altclk",
.ops = &clkops_null,
- .flags = RATE_PROPAGATES,
};
/* Optional external clock input for some McBSPs */
static struct clk mcbsp_clks = {
.name = "mcbsp_clks",
.ops = &clkops_null,
- .flags = RATE_PROPAGATES,
};
/* PRM EXTERNAL CLOCK OUTPUT */
/* CM CLOCKS */
-static const struct clksel_rate dpll_bypass_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate dpll_locked_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 0 }
-};
-
static const struct clksel_rate div16_dpll_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
{ .div = 2, .val = 2, .flags = RATE_IN_343X },
.mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_MPU_DPLL_MULT_MASK,
.div1_mask = OMAP3430_MPU_DPLL_DIV_MASK,
+ .clk_bypass = &dpll1_fck,
+ .clk_ref = &sys_ck,
.freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_MPU_DPLL_MASK,
.autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
.autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
- .idlest_bit = OMAP3430_ST_MPU_CLK_SHIFT,
+ .idlest_mask = OMAP3430_ST_MPU_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
.ops = &clkops_null,
.parent = &sys_ck,
.dpll_data = &dpll1_dd,
- .flags = RATE_PROPAGATES,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
+ .clkdm_name = "dpll1_clkdm",
.recalc = &omap3_dpll_recalc,
};
.name = "dpll1_x2_ck",
.ops = &clkops_null,
.parent = &dpll1_ck,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll1_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
.clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
.clksel = div16_dpll1_x2m2_clksel,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll1_clkdm",
.recalc = &omap2_clksel_recalc,
};
.mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK,
.div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK,
+ .clk_bypass = &dpll2_fck,
+ .clk_ref = &sys_ck,
.freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_IVA2_DPLL_MASK,
.autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
.autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
- .idlest_bit = OMAP3430_ST_IVA2_CLK_SHIFT,
+ .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
.ops = &clkops_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll2_dd,
- .flags = RATE_PROPAGATES,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
+ .clkdm_name = "dpll2_clkdm",
.recalc = &omap3_dpll_recalc,
};
OMAP3430_CM_CLKSEL2_PLL),
.clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
.clksel = div16_dpll2_m2x2_clksel,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll2_clkdm",
.recalc = &omap2_clksel_recalc,
};
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.mult_mask = OMAP3430_CORE_DPLL_MULT_MASK,
.div1_mask = OMAP3430_CORE_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
.freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_CORE_DPLL_MASK,
.recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT,
.autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
.autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK,
+ .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+ .idlest_mask = OMAP3430_ST_CORE_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
.ops = &clkops_null,
.parent = &sys_ck,
.dpll_data = &dpll3_dd,
- .flags = RATE_PROPAGATES,
.round_rate = &omap2_dpll_round_rate,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap3_dpll_recalc,
};
.name = "dpll3_x2_ck",
.ops = &clkops_null,
.parent = &dpll3_ck,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
{ .parent = NULL }
};
-/*
- * DPLL3 output M2
- * REVISIT: This DPLL output divider must be changed in SRAM, so until
- * that code is ready, this should remain a 'read-only' clksel clock.
- */
+/* DPLL3 output M2 - primary control point for CORE speed */
static struct clk dpll3_m2_ck = {
.name = "dpll3_m2_ck",
.ops = &clkops_null,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
.clksel = div31_dpll3m2_clksel,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll3_clkdm",
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap3_core_dpll_m2_set_rate,
.recalc = &omap2_clksel_recalc,
};
-static const struct clksel core_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll3_m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk core_ck = {
.name = "core_ck",
.ops = &clkops_null,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
- .clksel = core_ck_clksel,
- .flags = RATE_PROPAGATES,
- .recalc = &omap2_clksel_recalc,
-};
-
-static const struct clksel dpll3_m2x2_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll3_x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
+ .parent = &dpll3_m2_ck,
+ .recalc = &followparent_recalc,
};
static struct clk dpll3_m2x2_ck = {
.name = "dpll3_m2x2_ck",
.ops = &clkops_null,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
- .clksel = dpll3_m2x2_ck_clksel,
- .flags = RATE_PROPAGATES,
- .recalc = &omap2_clksel_recalc,
+ .parent = &dpll3_x2_ck,
+ .clkdm_name = "dpll3_clkdm",
+ .recalc = &followparent_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_DIV_DPLL3_MASK,
.clksel = div16_dpll3_clksel,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap2_clksel_recalc,
};
.parent = &dpll3_m3_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT,
- .flags = RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
-static const struct clksel emu_core_alwon_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk emu_core_alwon_ck = {
.name = "emu_core_alwon_ck",
.ops = &clkops_null,
.parent = &dpll3_m3x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
- .clksel = emu_core_alwon_ck_clksel,
- .flags = RATE_PROPAGATES,
- .recalc = &omap2_clksel_recalc,
+ .clkdm_name = "dpll3_clkdm",
+ .recalc = &followparent_recalc,
};
/* DPLL4 */
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
.mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK,
.div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
.freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK,
.autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
.autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .idlest_bit = OMAP3430_ST_PERIPH_CLK_SHIFT,
+ .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
.ops = &clkops_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll4_dd,
- .flags = RATE_PROPAGATES,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_dpll4_set_rate,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_dpll_recalc,
};
.name = "dpll4_x2_ck",
.ops = &clkops_null,
.parent = &dpll4_ck,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
.clksel_mask = OMAP3430_DIV_96M_MASK,
.clksel = div16_dpll4_clksel,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
.parent = &dpll4_m2_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_96M_SHIFT,
- .flags = RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
-static const struct clksel omap_96m_alwon_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
/*
* DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
* PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM:
.name = "omap_96m_alwon_fck",
.ops = &clkops_null,
.parent = &dpll4_m2x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = omap_96m_alwon_fck_clksel,
- .flags = RATE_PROPAGATES,
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
static struct clk cm_96m_fck = {
.name = "cm_96m_fck",
.ops = &clkops_null,
.parent = &omap_96m_alwon_fck,
- .flags = RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_SOURCE_96M_MASK,
.clksel = omap_96m_fck_clksel,
- .flags = RATE_PROPAGATES,
.recalc = &omap2_clksel_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_TV_MASK,
.clksel = div16_dpll4_clksel,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_TV_SHIFT,
- .flags = RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
-static const struct clksel virt_omap_54m_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
-static struct clk virt_omap_54m_fck = {
- .name = "virt_omap_54m_fck",
- .ops = &clkops_null,
- .parent = &dpll4_m3x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = virt_omap_54m_fck_clksel,
- .flags = RATE_PROPAGATES,
- .recalc = &omap2_clksel_recalc,
-};
-
static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
{ .div = 0 }
};
static const struct clksel omap_54m_clksel[] = {
- { .parent = &virt_omap_54m_fck, .rates = omap_54m_d4m3x2_rates },
+ { .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
{ .parent = &sys_altclk, .rates = omap_54m_alt_rates },
{ .parent = NULL }
};
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_SOURCE_54M_MASK,
.clksel = omap_54m_clksel,
- .flags = RATE_PROPAGATES,
.recalc = &omap2_clksel_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_SOURCE_48M_MASK,
.clksel = omap_48m_clksel,
- .flags = RATE_PROPAGATES,
.recalc = &omap2_clksel_recalc,
};
.ops = &clkops_null,
.parent = &omap_48m_fck,
.fixed_div = 4,
- .flags = RATE_PROPAGATES,
.recalc = &omap2_fixed_divisor_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_DSS1_MASK,
.clksel = div16_dpll4_clksel,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
+ .set_rate = &omap2_clksel_set_rate,
+ .round_rate = &omap2_clksel_round_rate,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
.parent = &dpll4_m4_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_CAM_SHIFT,
- .flags = RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_CAM_MASK,
.clksel = div16_dpll4_clksel,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
.parent = &dpll4_m5_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_CAM_SHIFT,
- .flags = RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_DIV_DPLL4_MASK,
.clksel = div16_dpll4_clksel,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
- .flags = RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
.name = "emu_per_alwon_ck",
.ops = &clkops_null,
.parent = &dpll4_m6x2_ck,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &followparent_recalc,
};
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
.mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
.div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
.freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
.enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
.autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
.autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
- .idlest_bit = OMAP3430ES2_ST_PERIPH2_CLK_SHIFT,
+ .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
.ops = &clkops_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll5_dd,
- .flags = RATE_PROPAGATES,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
+ .clkdm_name = "dpll5_clkdm",
.recalc = &omap3_dpll_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
.clksel_mask = OMAP3430ES2_DIV_120M_MASK,
.clksel = div16_dpll5_clksel,
- .flags = RATE_PROPAGATES,
- .recalc = &omap2_clksel_recalc,
-};
-
-static const struct clksel omap_120m_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll5_m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
-static struct clk omap_120m_fck = {
- .name = "omap_120m_fck",
- .ops = &clkops_null,
- .parent = &dpll5_m2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
- .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
- .clksel = omap_120m_fck_clksel,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "dpll5_clkdm",
.recalc = &omap2_clksel_recalc,
};
.clksel_reg = OMAP3430_CM_CLKOUT_CTRL,
.clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK,
.clksel = clkout2_src_clksel,
- .flags = RATE_PROPAGATES,
+ .clkdm_name = "core_clkdm",
.recalc = &omap2_clksel_recalc,
};
.name = "corex2_fck",
.ops = &clkops_null,
.parent = &dpll3_m2x2_ck,
- .flags = RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
/* DPLL power domain clock controls */
-static const struct clksel div2_core_clksel[] = {
- { .parent = &core_ck, .rates = div2_rates },
+static const struct clksel_rate div4_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 2, .val = 2, .flags = RATE_IN_343X },
+ { .div = 4, .val = 4, .flags = RATE_IN_343X },
+ { .div = 0 }
+};
+
+static const struct clksel div4_core_clksel[] = {
+ { .parent = &core_ck, .rates = div4_rates },
{ .parent = NULL }
};
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
.clksel_mask = OMAP3430_MPU_CLK_SRC_MASK,
- .clksel = div2_core_clksel,
- .flags = RATE_PROPAGATES,
+ .clksel = div4_core_clksel,
.recalc = &omap2_clksel_recalc,
};
-/*
- * MPU clksel:
- * If DPLL1 is locked, mpu_ck derives from DPLL1; otherwise, mpu_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll1_fck'
- */
-static const struct clksel mpu_clksel[] = {
- { .parent = &dpll1_fck, .rates = dpll_bypass_rates },
- { .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk mpu_ck = {
.name = "mpu_ck",
.ops = &clkops_null,
.parent = &dpll1_x2m2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
- .clksel_mask = OMAP3430_ST_MPU_CLK_MASK,
- .clksel = mpu_clksel,
- .flags = RATE_PROPAGATES,
.clkdm_name = "mpu_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
.clksel_mask = OMAP3430_ST_MPU_CLK_MASK,
.clksel = arm_fck_clksel,
- .flags = RATE_PROPAGATES,
.recalc = &omap2_clksel_recalc,
};
.name = "emu_mpu_alwon_ck",
.ops = &clkops_null,
.parent = &mpu_ck,
- .flags = RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
.clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK,
- .clksel = div2_core_clksel,
- .flags = RATE_PROPAGATES,
+ .clksel = div4_core_clksel,
.recalc = &omap2_clksel_recalc,
};
-/*
- * IVA2 clksel:
- * If DPLL2 is locked, iva2_ck derives from DPLL2; otherwise, iva2_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll2_fck'
- */
-
-static const struct clksel iva2_clksel[] = {
- { .parent = &dpll2_fck, .rates = dpll_bypass_rates },
- { .parent = &dpll2_m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk iva2_ck = {
.name = "iva2_ck",
.ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
- OMAP3430_CM_IDLEST_PLL),
- .clksel_mask = OMAP3430_ST_IVA2_CLK_MASK,
- .clksel = iva2_clksel,
- .flags = RATE_PROPAGATES,
.clkdm_name = "iva2_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
/* Common interface clocks */
+static const struct clksel div2_core_clksel[] = {
+ { .parent = &core_ck, .rates = div2_rates },
+ { .parent = NULL }
+};
+
static struct clk l3_ick = {
.name = "l3_ick",
.ops = &clkops_null,
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_L3_MASK,
.clksel = div2_core_clksel,
- .flags = RATE_PROPAGATES,
.clkdm_name = "core_l3_clkdm",
.recalc = &omap2_clksel_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_L4_MASK,
.clksel = div2_l3_clksel,
- .flags = RATE_PROPAGATES,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
.clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
.clksel_mask = OMAP_CLKSEL_GFX_MASK,
.clksel = gfx_l3_clksel,
- .flags = RATE_PROPAGATES,
.clkdm_name = "gfx_3430es1_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk usbtll_fck = {
.name = "usbtll_fck",
.ops = &clkops_omap2_dflt,
- .parent = &omap_120m_fck,
+ .parent = &dpll5_m2_ck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
.enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
.recalc = &followparent_recalc,
.name = "core_96m_fck",
.ops = &clkops_null,
.parent = &omap_96m_fck,
- .flags = RATE_PROPAGATES,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
.name = "core_48m_fck",
.ops = &clkops_null,
.parent = &omap_48m_fck,
- .flags = RATE_PROPAGATES,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
.name = "core_12m_fck",
.ops = &clkops_null,
.parent = &omap_12m_fck,
- .flags = RATE_PROPAGATES,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_SSI_MASK,
.clksel = ssi_ssr_clksel,
- .flags = RATE_PROPAGATES,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
.ops = &clkops_null,
.parent = &l3_ick,
.init = &omap2_init_clk_clkdm,
- .flags = RATE_PROPAGATES,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
.name = "security_l3_ick",
.ops = &clkops_null,
.parent = &l3_ick,
- .flags = RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
.ops = &clkops_null,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
- .flags = RATE_PROPAGATES,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
.name = "ssi_l4_ick",
.ops = &clkops_null,
.parent = &l4_ick,
- .flags = RATE_PROPAGATES,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
.name = "security_l4_ick2",
.ops = &clkops_null,
.parent = &l4_ick,
- .flags = RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
};
/* DSS */
-static const struct clksel dss1_alwon_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk dss1_alwon_fck = {
.name = "dss1_alwon_fck",
.ops = &clkops_omap2_dflt,
.parent = &dpll4_m4x2_ck,
- .init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_DSS1_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = dss1_alwon_fck_clksel,
.clkdm_name = "dss_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
static struct clk dss_tv_fck = {
/* CAM */
-static const struct clksel cam_mclk_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk cam_mclk = {
.name = "cam_mclk",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &dpll4_m5x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = cam_mclk_clksel,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
.clkdm_name = "cam_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
static struct clk cam_ick = {
/* Handles both L3 and L4 clocks */
.name = "cam_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
.recalc = &followparent_recalc,
};
+static struct clk csi2_96m_fck = {
+ .name = "csi2_96m_fck",
+ .ops = &clkops_omap2_dflt,
+ .parent = &core_96m_fck,
+ .init = &omap2_init_clk_clkdm,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_EN_CSI2_SHIFT,
+ .clkdm_name = "cam_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/* USBHOST - 3430ES2 only */
static struct clk usbhost_120m_fck = {
.name = "usbhost_120m_fck",
.ops = &clkops_omap2_dflt_wait,
- .parent = &omap_120m_fck,
+ .parent = &dpll5_m2_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT,
static const struct clksel usim_clksel[] = {
{ .parent = &omap_96m_fck, .rates = usim_96m_rates },
- { .parent = &omap_120m_fck, .rates = usim_120m_rates },
+ { .parent = &dpll5_m2_ck, .rates = usim_120m_rates },
{ .parent = &sys_ck, .rates = div2_rates },
{ .parent = NULL },
};
.ops = &clkops_null,
.init = &omap2_init_clk_clkdm,
.parent = &omap_32k_fck,
- .flags = RATE_PROPAGATES,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
.name = "wkup_l4_ick",
.ops = &clkops_null,
.parent = &sys_ck,
- .flags = RATE_PROPAGATES,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
.ops = &clkops_null,
.parent = &omap_96m_alwon_fck,
.init = &omap2_init_clk_clkdm,
- .flags = RATE_PROPAGATES,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
.ops = &clkops_null,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
- .flags = RATE_PROPAGATES,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
.ops = &clkops_null,
.parent = &omap_32k_fck,
.clkdm_name = "per_clkdm",
- .flags = RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
.name = "per_l4_ick",
.ops = &clkops_null,
.parent = &l4_ick,
- .flags = RATE_PROPAGATES,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_MUX_CTRL_MASK,
.clksel = emu_src_clksel,
- .flags = RATE_PROPAGATES,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CLKSEL_PCLK_MASK,
.clksel = pclk_emu_clksel,
- .flags = RATE_PROPAGATES,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK,
.clksel = pclkx2_emu_clksel,
- .flags = RATE_PROPAGATES,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK,
.clksel = atclk_emu_clksel,
- .flags = RATE_PROPAGATES,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK,
.clksel = emu_src_clksel,
- .flags = RATE_PROPAGATES,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
.parent = &sys_ck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_SR1_SHIFT,
- .flags = RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
.parent = &sys_ck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_SR2_SHIFT,
- .flags = RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
/* SECURE_32K_FCK clocks */
-/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_null,
projects / linux-2.6-omap-h63xx.git / blobdiff