#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
-#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <mach/hardware.h>
#include <asm/mach/flash.h>
#include <mach/board.h>
-#include <mach/usb.h>
#include <mach/common.h>
#include <mach/gpmc.h>
#include <mach/nand.h>
#include <mach/mux.h>
+#include <mach/usb.h>
-#include "twl4030-generic-scripts.h"
#include "mmc-twl4030.h"
-
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
.resource = &omap3beagle_nand_resource,
};
-#include "sdram-micron-mt46h32m32lf-6.h"
-
static struct omap_uart_config omap3_beagle_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
-static struct twl4030_usb_data beagle_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static struct twl4030_hsmmc_info mmc[] = {
{
.mmc = 1,
{} /* Terminator */
};
-static struct regulator_consumer_supply beagle_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply beagle_vsim_supply = {
- .supply = "vmmc_aux",
-};
-
static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
- /* link regulators to MMC adapters */
- beagle_vmmc1_supply.dev = mmc[0].dev;
- beagle_vsim_supply.dev = mmc[0].dev;
-
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
.setup = beagle_twl_gpio_setup,
};
-static struct platform_device omap3_beagle_lcd_device = {
- .name = "omap3beagle_lcd",
- .id = -1,
-};
-
-static struct regulator_consumer_supply beagle_vdac_supply = {
- .supply = "vdac",
- .dev = &omap3_beagle_lcd_device.dev,
-};
-
-static struct regulator_consumer_supply beagle_vdvi_supply = {
- .supply = "vdvi",
- .dev = &omap3_beagle_lcd_device.dev,
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data beagle_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data beagle_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vsim_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data beagle_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data beagle_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vdvi_supply,
-};
-
-static const struct twl4030_resconfig beagle_resconfig[] = {
- /* disable regulators that u-boot left enabled; the
- * devices' drivers should be managing these.
- */
- { .resource = RES_VAUX3, }, /* not even connected! */
- { .resource = RES_VMMC1, },
- { .resource = RES_VSIM, },
- { .resource = RES_VPLL2, },
- { .resource = RES_VDAC, },
- { .resource = RES_VUSB_1V5, },
- { .resource = RES_VUSB_1V8, },
- { .resource = RES_VUSB_3V1, },
- { 0, },
-};
-
-static struct twl4030_power_data beagle_power_data = {
- .resource_config = beagle_resconfig,
- /* REVISIT can't use GENERIC3430_T2SCRIPTS_DATA;
- * among other things, it makes reboot fail.
- */
-};
-
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
- .usb = &beagle_usb_data,
.gpio = &beagle_gpio_data,
- .power = &beagle_power_data,
- .vmmc1 = &beagle_vmmc1,
- .vsim = &beagle_vsim,
- .vdac = &beagle_vdac,
- .vpll2 = &beagle_vpll2,
};
static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
}
+static struct platform_device omap3_beagle_lcd_device = {
+ .name = "omap3beagle_lcd",
+ .id = -1,
+};
+
static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
.ctrl_name = "internal",
};
gpio_direction_output(170, true);
usb_musb_init();
- usb_ehci_init();
omap3beagle_flash_init();
}
projects / linux-2.6-omap-h63xx.git / blobdiff