Extra omap code in linux-omap tree

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap2 / Kconfig

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 64ab386a65c775ff7553d24b65ab8c4928d64210..3a2214cb37aba18fb5f4964223d79693902b1029 100644 (file)
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -10,10 +10,13 @@ config ARCH_OMAP2420
        depends on ARCH_OMAP24XX
        select OMAP_DM_TIMER
        select ARCH_OMAP_OTG
+       select CPU_V6
 
 config ARCH_OMAP2430
        bool "OMAP2430 support"
        depends on ARCH_OMAP24XX
+       select ARCH_OMAP_OTG
+       select CPU_V6
 
 config ARCH_OMAP34XX
        bool "OMAP34xx Based System"
@@ -23,6 +26,7 @@ config ARCH_OMAP3430
        bool "OMAP3430 support"
        depends on ARCH_OMAP3 && ARCH_OMAP34XX
        select ARCH_OMAP_OTG
+       select CPU_V7
 
 comment "OMAP Board Type"
        depends on ARCH_OMAP2 || ARCH_OMAP3
@@ -31,25 +35,98 @@ config MACH_OMAP_GENERIC
        bool "Generic OMAP board"
        depends on ARCH_OMAP2 && ARCH_OMAP24XX
 
+config MACH_NOKIA_N800
+       bool "Nokia N800"
+       depends on ARCH_OMAP2420
+       select VIDEO_TCM825X if VIDEO_OMAP2 && VIDEO_HELPER_CHIPS_AUTO
+       select CBUS if VIDEO_TCM825X
+       select CBUS_RETU if VIDEO_TCM825X
+       select MENELAUS if VIDEO_TCM825X
+       select OMAP_GPIO_SWITCH
+
+config MACH_NOKIA_N810
+       bool "Nokia N810"
+       depends on MACH_NOKIA_N800
+
+config MACH_NOKIA_N810_WIMAX
+       bool "Nokia N810 WiMAX"
+       depends on MACH_NOKIA_N800
+       select MACH_NOKIA_N810
+
+config MACH_NOKIA_RX51
+       bool "Nokia RX-51 board"
+       depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP2_TUSB6010
+       bool
+       depends on ARCH_OMAP2 && ARCH_OMAP2420
+       default y if MACH_NOKIA_N800
+
 config MACH_OMAP_H4
        bool "OMAP 2420 H4 board"
-       depends on ARCH_OMAP2 && ARCH_OMAP24XX
+       depends on ARCH_OMAP2 && ARCH_OMAP2420
        select OMAP_DEBUG_DEVICES
 
+config MACH_OMAP_H4_TUSB
+       bool "TUSB 6010 EVM board"
+       depends on MACH_OMAP_H4
+       select MACH_OMAP2_TUSB6010
+       help
+         Set this if you've got a TUSB6010 high speed USB board.
+         You may need to consult the schematics for your revisions
+         of the Menelaus and TUSB boards, and make changes to be
+         sure this is set up properly for your board stack.
+
+         Be sure to select OTG mode operation, not host-only or
+         peripheral-only.
+
+config MACH_OMAP_H4_OTG
+       bool "Use USB OTG connector, not device connector (S1.10)"
+       depends on MACH_OMAP_H4
+       help
+         Set this if you've set S1.10 (on the mainboard) to use the
+         Mini-AB (OTG) connector and OTG transceiver with the USB0
+         port, instead of the Mini-B ("download") connector with its
+         non-OTG transceiver.
+
+         Note that the "download" connector can be used to bootstrap
+         the system from the OMAP mask ROM.  Also, since this is a
+         development platform, you can also force the OTG port into
+         a non-OTG operational mode.
+
+config MACH_OMAP2_H4_USB1
+       bool "Use USB1 port, not UART2 (S3.3)"
+       depends on MACH_OMAP_H4
+       help
+         Set this if you've set SW3.3 (on the CPU card) so that the
+         expansion connectors receive USB1 signals instead of UART2.
+
 config MACH_OMAP_APOLLON
        bool "OMAP 2420 Apollon board"
-       depends on ARCH_OMAP2 && ARCH_OMAP24XX
+       depends on ARCH_OMAP2 && ARCH_OMAP2420
 
 config MACH_OMAP_2430SDP
        bool "OMAP 2430 SDP board"
+       depends on ARCH_OMAP2 && ARCH_OMAP2430
+
+config MACH_OMAP_LDP
+       bool "OMAP3 LDP board"
+       depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP2EVM 
+       bool "OMAP 2530 EVM board"
        depends on ARCH_OMAP2 && ARCH_OMAP24XX
 
-config MACH_OMAP3_BEAGLE
-       bool "OMAP3 BEAGLE board"
+config MACH_OMAP_3430SDP
+       bool "OMAP 3430 SDP board"
        depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
-config MACH_OMAP_LDP
-       bool "OMAP3 LDP board"
+config MACH_OMAP3EVM
+       bool "OMAP 3530 EVM board"
+       depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP3_BEAGLE
+       bool "OMAP3 BEAGLE board"
        depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
 config MACH_OVERO