From f618ebfcbf9616a0fa9a78f5ecb69762f0fa3c59 Mon Sep 17 00:00:00 2001 From: Wolfgang Ocker Date: Wed, 15 Oct 2008 15:00:47 +0200 Subject: [PATCH] of/spi: Support specifying chip select as active high via device tree The patch allows to specify that an SPI device needs an active high chip select. Signed-off-by: Wolfgang Ocker Signed-off-by: Kumar Gala --- Documentation/powerpc/booting-without-of.txt | 2 ++ drivers/of/of_spi.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index de4063cb4fd..02ea9a971b8 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1917,6 +1917,8 @@ platforms are moved over to use the flattened-device-tree model. inverse clock polarity (CPOL) mode - spi-cpha - (optional) Empty property indicating device requires shifted clock phase (CPHA) mode + - spi-cs-high - (optional) Empty property indicating device requires + chip select active high SPI example for an MPC5200 SPI bus: spi@f00 { diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c index b01eec026f6..bed0ed6dcdc 100644 --- a/drivers/of/of_spi.c +++ b/drivers/of/of_spi.c @@ -61,6 +61,8 @@ void of_register_spi_devices(struct spi_master *master, struct device_node *np) spi->mode |= SPI_CPHA; if (of_find_property(nc, "spi-cpol", NULL)) spi->mode |= SPI_CPOL; + if (of_find_property(nc, "spi-cs-high", NULL)) + spi->mode |= SPI_CS_HIGH; /* Device speed */ prop = of_get_property(nc, "spi-max-frequency", &len); -- 2.41.0