From e77e2c7f8a56458593fd2a881c44b4ec3e52e454 Mon Sep 17 00:00:00 2001 From: Trilok Soni Date: Mon, 18 Jun 2007 18:44:12 +0530 Subject: [PATCH] ARM: OMAP: Frambuffer driver CodingStyle changes. -- --Trilok Soni From 4f6ac6400f75587094adff05da860d4540302a96 Mon Sep 17 00:00:00 2001 From: Trilok Soni Date: Sat, 26 May 2007 19:19:19 +0530 Subject: [PATCH] ARM: OMAP: Frambuffer driver CodingStyle changes. - Remove file paths, as it keeps changing and some the files were showing in-correct paths. - Remove whitespaces and modify multi-line comments as per CodingStyle. Signed-off-by: Trilok Soni Signed-off-by: Tony Lindgren --- drivers/video/omap/dispc.c | 5 ++-- drivers/video/omap/hwa742.c | 23 +++++++++++------- drivers/video/omap/lcd_apollon.c | 2 -- drivers/video/omap/lcd_h2.c | 8 +++---- drivers/video/omap/lcd_h3.c | 2 -- drivers/video/omap/lcd_h4.c | 2 -- drivers/video/omap/lcd_inn1510.c | 2 -- drivers/video/omap/lcd_inn1610.c | 2 -- drivers/video/omap/lcd_mipid.c | 11 +++++---- drivers/video/omap/lcd_osk.c | 2 -- drivers/video/omap/lcd_p2.c | 2 -- drivers/video/omap/lcd_palmte.c | 2 -- drivers/video/omap/lcd_palmtt.c | 2 -- drivers/video/omap/lcd_palmz71.c | 2 -- drivers/video/omap/lcd_sx1.c | 24 +++++++++---------- drivers/video/omap/lcdc.c | 26 ++++++++++++-------- drivers/video/omap/omapfb_main.c | 41 ++++++++++++++++++++------------ drivers/video/omap/rfbi.c | 2 -- drivers/video/omap/sossi.c | 23 +++++++++++------- 19 files changed, 93 insertions(+), 90 deletions(-) diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index 5eeaddb3075..36965c6c3db 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/omap2/dispc.c - * * OMAP2 display controller support * * Copyright (C) 2005 Nokia Corporation @@ -527,7 +525,8 @@ static int omap_dispc_set_scale(int plane, enable_lcd_clocks(1); if (orig_width < out_width) { - /* Upsampling. + /* + * Upsampling. * Currently you can only scale both dimensions in one way. */ if (orig_height > out_height || diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c index 5d92f593d44..dc48e02f215 100644 --- a/drivers/video/omap/hwa742.c +++ b/drivers/video/omap/hwa742.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/hwa742.c - * * Epson HWA742 LCD controller driver * * Copyright (C) 2004-2005 Nokia Corporation @@ -817,7 +815,8 @@ static int setup_tearsync(unsigned long pix_clk, int extif_div) /* time to transfer one pixel (16bpp) in ps */ hwa742.pix_tx_time = hwa742.reg_timings.we_cycle_time; if (hwa742.extif->get_max_tx_rate != NULL) { - /* The external interface might have a rate limitation, + /* + * The external interface might have a rate limitation, * if so, we have to maximize our transfer rate. */ unsigned long min_tx_time; @@ -834,24 +833,30 @@ static int setup_tearsync(unsigned long pix_clk, int extif_div) hwa742.line_upd_time = (hdisp + hndp) * 1000000 / (pix_clk / 1000); hwa742.line_upd_time *= 1000; if (hdisp * hwa742.pix_tx_time > hwa742.line_upd_time) - /* transfer speed too low, we might have to use both - * HS and VS */ + /* + * transfer speed too low, we might have to use both + * HS and VS + */ use_hsvs = 1; else /* decent transfer speed, we'll always use only VS */ use_hsvs = 0; if (use_hsvs && (hs_pol_inv || vs_pol_inv)) { - /* HS or'ed with VS doesn't work, use the active high - * TE signal based on HNDP / VNDP */ + /* + * HS or'ed with VS doesn't work, use the active high + * TE signal based on HNDP / VNDP + */ use_ndp = 1; hs_pol_inv = 0; vs_pol_inv = 0; hs = hndp; vs = vndp; } else { - /* Use HS or'ed with VS as a TE signal if both are needed - * or VNDP if only vsync is needed. */ + /* + * Use HS or'ed with VS as a TE signal if both are needed + * or VNDP if only vsync is needed. + */ use_ndp = 0; hs = hsw; vs = vsw; diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c index 4c0f370a1c5..179315f1a43 100644 --- a/drivers/video/omap/lcd_apollon.c +++ b/drivers/video/omap/lcd_apollon.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd_apollon.c - * * LCD panel support for the Samsung OMAP2 Apollon board * * Copyright (C) 2005,2006 Samsung Electronics diff --git a/drivers/video/omap/lcd_h2.c b/drivers/video/omap/lcd_h2.c index 288f08243db..7d16b5703c9 100644 --- a/drivers/video/omap/lcd_h2.c +++ b/drivers/video/omap/lcd_h2.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd-h2.c - * * LCD panel support for the TI OMAP H2 board * * Copyright (C) 2004 Nokia Corporation @@ -46,7 +44,8 @@ static int h2_panel_enable(struct lcd_panel *panel) { int r; - /* Assert LCD_EN, BKLIGHT_EN pins on LCD panel + /* + * Assert LCD_EN, BKLIGHT_EN pins on LCD panel * page2, GPIO config reg, GPIO(0,1) to out and asserted */ r = tsc2101_write_sync(h2_panel_dev.tsc2101_dev, 2, 0x23, 0xcc00); @@ -59,7 +58,8 @@ static int h2_panel_enable(struct lcd_panel *panel) static void h2_panel_disable(struct lcd_panel *panel) { - /* Deassert LCD_EN and BKLIGHT_EN pins on LCD panel + /* + * Deassert LCD_EN and BKLIGHT_EN pins on LCD panel * page2, GPIO config reg, GPIO(0,1) to out and deasserted */ if (tsc2101_write_sync(h2_panel_dev.tsc2101_dev, 2, 0x23, 0x8800)) diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c index 60ad0e0942c..51807b4e26d 100644 --- a/drivers/video/omap/lcd_h3.c +++ b/drivers/video/omap/lcd_h3.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd-h3.c - * * LCD panel support for the TI OMAP H3 board * * Copyright (C) 2004 Nokia Corporation diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c index dde00d422e4..fd6f0eb16de 100644 --- a/drivers/video/omap/lcd_h4.c +++ b/drivers/video/omap/lcd_h4.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd-h4.c - * * LCD panel support for the TI OMAP H4 board * * Copyright (C) 2004 Nokia Corporation diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c index d514b94684d..559240e2ceb 100644 --- a/drivers/video/omap/lcd_inn1510.c +++ b/drivers/video/omap/lcd_inn1510.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd-inn1510.c - * * LCD panel support for the TI OMAP1510 Innovator board * * Copyright (C) 2004 Nokia Corporation diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c index cb1fa5a543f..e8be00cc6bc 100644 --- a/drivers/video/omap/lcd_inn1610.c +++ b/drivers/video/omap/lcd_inn1610.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd-inn1610.c - * * LCD panel support for the TI OMAP1610 Innovator board * * Copyright (C) 2004 Nokia Corporation diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c index acc18abc3ea..569e18bd84e 100644 --- a/drivers/video/omap/lcd_mipid.c +++ b/drivers/video/omap/lcd_mipid.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd_mipid.c - * * LCD driver for MIPI DBI-C / DCS compatible LCDs * * Copyright (C) 2006 Nokia Corporation @@ -198,7 +196,8 @@ static void set_sleep_mode(struct mipid_device *md, int on) hw_guard_wait(md); mipid_cmd(md, cmd); hw_guard_start(md, 120); - /* When we enable the panel, it seems we _have_ to sleep + /* + * When we enable the panel, it seems we _have_ to sleep * 120 ms before sending the init string. When disabling the * panel we'll sleep for the duration of 2 frames, so that the * controller can still provide the PCLK,HS,VS signals. */ @@ -425,8 +424,10 @@ static void mipid_disable(struct lcd_panel *panel) { struct mipid_device *md = to_mipid_device(panel); - /* A final ESD work might be called before returning, - * so do this without holding the lock. */ + /* + * A final ESD work might be called before returning, + * so do this without holding the lock. + */ mipid_esd_stop_check(md); mutex_lock(&md->mutex); diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c index cc8bb597ff6..a38038840fd 100644 --- a/drivers/video/omap/lcd_osk.c +++ b/drivers/video/omap/lcd_osk.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd-osk.c - * * LCD panel support for the TI OMAP OSK board * * Copyright (C) 2004 Nokia Corporation diff --git a/drivers/video/omap/lcd_p2.c b/drivers/video/omap/lcd_p2.c index 864033d4b54..b0a0af8bf20 100644 --- a/drivers/video/omap/lcd_p2.c +++ b/drivers/video/omap/lcd_p2.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd-p2.c - * * LCD panel support for the TI OMAP P2 board * * Authors: diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c index 1d37803a9ac..ac6d956effd 100644 --- a/drivers/video/omap/lcd_palmte.c +++ b/drivers/video/omap/lcd_palmte.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd_palmte.c - * * LCD panel support for the Palm Tungsten E * * Original version : Romain Goyet diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c index 97d3680ec1b..594c22ef01f 100644 --- a/drivers/video/omap/lcd_palmtt.c +++ b/drivers/video/omap/lcd_palmtt.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd_palmtt.c - * * LCD panel support for Palm Tungsten|T * Current version : Marek Vasut * diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c index 892993f3fd0..3c68b974213 100644 --- a/drivers/video/omap/lcd_palmz71.c +++ b/drivers/video/omap/lcd_palmz71.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/lcd_palmz71.c - * * LCD panel support for the Palm Zire71 * * Original version : Romain Goyet diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c index 0b927f6ae48..7049c957191 100644 --- a/drivers/video/omap/lcd_sx1.c +++ b/drivers/video/omap/lcd_sx1.c @@ -1,9 +1,7 @@ /* - * File: drivers/video/omap/lcd_sx1.c - * * LCD panel support for the Siemens SX1 mobile phone * - * Current version : Vovan888 at gmail com, great help from FCA00000 + * Current version : Vovan888@gmail com, great help from FCA00000 * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -41,7 +39,7 @@ #define GPIO_PIN_CONTROL 0xfffce018 -#define A_LCD_SSC_RD 3 +#define A_LCD_SSC_RD 3 #define A_LCD_SSC_SD 7 #define _A_LCD_RESET 9 #define _A_LCD_SSC_CS 12 @@ -266,16 +264,16 @@ struct lcd_panel sx1_panel = { OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK | OMAP_LCDC_INV_OUTPUT_EN, - .x_res = 176, - .y_res = 220, + .x_res = 176, + .y_res = 220, .data_lines = 16, - .bpp = 16, - .hsw = 5, - .hfp = 5, - .hbp = 5, - .vsw = 2, - .vfp = 1, - .vbp = 1, + .bpp = 16, + .hsw = 5, + .hfp = 5, + .hbp = 5, + .vsw = 2, + .vfp = 1, + .vbp = 1, .pixel_clock = 1500, .init = sx1_panel_init, diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index 197efe8b70b..5acb8e10801 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/omap1/lcdc.c - * * OMAP1 internal LCD controller * * Copyright (C) 2004 Nokia Corporation @@ -158,7 +156,8 @@ static void disable_controller_async(void) l = omap_readl(OMAP_LCDC_CONTROL); mask = OMAP_LCDC_CTRL_LCD_EN | OMAP_LCDC_IRQ_MASK; - /* Preserve the DONE mask, since we still want to get the + /* + * Preserve the DONE mask, since we still want to get the * final DONE irq. It will be disabled in the IRQ handler. */ mask &= ~OMAP_LCDC_IRQ_DONE; @@ -197,7 +196,8 @@ static void reset_controller(u32 status) } } -/* Configure the LCD DMA according to the current mode specified by parameters +/* + * Configure the LCD DMA according to the current mode specified by parameters * in lcdc.fbdev and fbdev->var. */ static void setup_lcd_dma(void) @@ -250,7 +250,8 @@ static void setup_lcd_dma(void) if (!cpu_is_omap15xx()) { int bpp = lcdc.bpp; - /* YUV support is only for external mode when we have the + /* + * YUV support is only for external mode when we have the * YUV window embedded in a 16bpp frame buffer. */ if (lcdc.color_mode == OMAPFB_COLOR_YUV420) @@ -277,7 +278,8 @@ static irqreturn_t lcdc_irq_handler(int irq, void *dev_id) if (status & OMAP_LCDC_STAT_DONE) { u32 l; - /* Disable IRQ_DONE. The status bit will be cleared + /* + * Disable IRQ_DONE. The status bit will be cleared * only when the controller is reenabled and we don't * want to get more interrupts. */ @@ -292,7 +294,8 @@ static irqreturn_t lcdc_irq_handler(int irq, void *dev_id) } } - /* Clear these interrupt status bits. + /* + * Clear these interrupt status bits. * Sync_lost, FUF bits were cleared by disabling the LCD controller * LOADED_PALETTE can be cleared this way only in palette only * load mode. In other load modes it's cleared by disabling the @@ -306,7 +309,8 @@ static irqreturn_t lcdc_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } -/* Change to a new video mode. We defer this to a later time to avoid any +/* + * Change to a new video mode. We defer this to a later time to avoid any * flicker and not to mess up the current LCD DMA context. For this we disable * the LCD controler, which will generate a DONE irq after the last frame has * been transferred. Then it'll be safe to reconfigure both the LCD controller @@ -410,7 +414,8 @@ static int omap_lcdc_enable_plane(int plane, int enable) return 0; } -/* Configure the LCD DMA for a palette load operation and do the palette +/* + * Configure the LCD DMA for a palette load operation and do the palette * downloading synchronously. We don't use the frame+palette load mode of * the controller, since the palette can always be downloaded seperately. */ @@ -549,7 +554,8 @@ static void inline setup_regs(void) panel->pixel_clock = lck / pcd / 1000; } -/* Configure the LCD controller, download the color palette and start a looped +/* + * Configure the LCD controller, download the color palette and start a looped * DMA transfer of the frame image data. Called only in internal * controller mode. */ diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 7915b1e8391..3d8dff1c2dd 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/omapfb_main.c - * * Framebuffer driver for TI OMAP boards * * Copyright (C) 2004 Nokia Corporation @@ -138,7 +136,8 @@ static const int dma_elem_type[] = { OMAP_DMA_DATA_TYPE_S32, }; -/* Allocate resources needed for LCD controller and LCD DMA operations. Video +/* + * Allocate resources needed for LCD controller and LCD DMA operations. Video * memory is allocated from system memory according to the virtual display * size, except if a bigger memory size is specified explicitly as a kernel * parameter. @@ -378,7 +377,8 @@ static void omapfb_sync(struct fb_info *fbi) omapfb_rqueue_unlock(fbdev); } -/* Set fb_info.fix fields and also updates fbdev. +/* + * Set fb_info.fix fields and also updates fbdev. * When calling this fb_info.var must be set up already. */ static void set_fb_fix(struct fb_info *fbi) @@ -463,7 +463,8 @@ static int set_color_mode(struct omapfb_plane_struct *plane, } } -/* Check the values in var against our capabilities and in case of out of +/* + * Check the values in var against our capabilities and in case of out of * bound values try to adjust them. */ static int set_fb_var(struct fb_info *fbi, @@ -609,7 +610,8 @@ static void omapfb_rotate(struct fb_info *fbi, int rotate) omapfb_rqueue_unlock(fbdev); } -/* Set new x,y offsets in the virtual display for the visible area and switch +/* + * Set new x,y offsets in the virtual display for the visible area and switch * to the new mode. */ static int omapfb_pan_display(struct fb_var_screeninfo *var, @@ -659,7 +661,8 @@ static int omapfb_mirror(struct fb_info *fbi, int mirror) return r; } -/* Check values in var, try to adjust them in case of out of bound values if +/* + * Check values in var, try to adjust them in case of out of bound values if * possible, or return error. */ static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) @@ -677,7 +680,8 @@ static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) return r; } -/* Switch to a new mode. The parameters for it has been check already by +/* + * Switch to a new mode. The parameters for it has been check already by * omapfb_check_var. */ static int omapfb_set_par(struct fb_info *fbi) @@ -783,7 +787,8 @@ static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) omapfb_rqueue_lock(fbdev); if (pi->enabled && !fbdev->mem_desc.region[plane->idx].size) { - /* This plane's memory was freed, can't enable it + /* + * This plane's memory was freed, can't enable it * until it's reallocated. */ r = -EINVAL; @@ -843,7 +848,8 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) rg->size = size; rg->type = mi->type; - /* size == 0 is a special case, for which we + /* + * size == 0 is a special case, for which we * don't check / adjust the screen parameters. * This isn't a problem since the plane can't * be reenabled unless its size is > 0. @@ -873,7 +879,8 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) memcpy(&fbi->var, new_var, sizeof(fbi->var)); set_fb_fix(fbi); } else { - /* Set these explicitly to indicate that the + /* + * Set these explicitly to indicate that the * plane memory is dealloce'd, the other * screen parameters in var / fix are invalid. */ @@ -1045,7 +1052,8 @@ void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval) } EXPORT_SYMBOL(omapfb_write_first_pixel); -/* Ioctl interface. Part of the kernel mode frame buffer API is duplicated +/* + * Ioctl interface. Part of the kernel mode frame buffer API is duplicated * here to be accessible by user mode code. */ static int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, @@ -1211,7 +1219,8 @@ static int omapfb_mmap(struct fb_info *info, struct vm_area_struct *vma) return r; } -/* Callback table for the frame buffer framework. Some of these pointers +/* + * Callback table for the frame buffer framework. Some of these pointers * will be changed according to the current setting of fb_info->accel_flags. */ static struct fb_ops omapfb_ops = { @@ -1526,7 +1535,8 @@ static int planes_init(struct omapfb_device *fbdev) return 0; } -/* Free driver resources. Can be called to rollback an aborted initialization +/* + * Free driver resources. Can be called to rollback an aborted initialization * sequence. */ static void omapfb_free_resources(struct omapfb_device *fbdev, int state) @@ -1607,7 +1617,8 @@ static void check_required_callbacks(struct omapfb_device *fbdev) #undef _C } -/* Called by LDM binding to probe and attach a new device. +/* + * Called by LDM binding to probe and attach a new device. * Initialization sequence: * 1. allocate system omapfb_device structure * 2. select controller type according to platform configuration diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c index 05164ca9957..316b08916f7 100644 --- a/drivers/video/omap/rfbi.c +++ b/drivers/video/omap/rfbi.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/omap2/rfbi.c - * * OMAP2 Remote Frame Buffer Interface support * * Copyright (C) 2005 Nokia Corporation diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c index 505b93276ff..715c4f27275 100644 --- a/drivers/video/omap/sossi.c +++ b/drivers/video/omap/sossi.c @@ -1,6 +1,4 @@ /* - * File: drivers/video/omap/omap1/sossi.c - * * OMAP1 Special OptimiSed Screen Interface support * * Copyright (C) 2004-2005 Nokia Corporation @@ -73,7 +71,8 @@ static struct { int clk_div; u8 clk_tw0[2]; u8 clk_tw1[2]; - /* if last_access is the same as current we don't have to change + /* + * if last_access is the same as current we don't have to change * the timings */ int last_access; @@ -135,7 +134,8 @@ static int calc_rd_timings(struct extif_timings *t) int reon, reoff, recyc, actim; int div = t->clk_div; - /* Make sure that after conversion it still holds that: + /* + * Make sure that after conversion it still holds that: * reoff > reon, recyc >= reoff, actim > reon */ reon = ps_to_sossi_ticks(t->re_on_time, div); @@ -166,7 +166,8 @@ static int calc_rd_timings(struct extif_timings *t) actim = ps_to_sossi_ticks(t->access_time, div); if (actim < reoff) actim++; - /* access time (data hold time) will be exactly one sossi + /* + * access time (data hold time) will be exactly one sossi * tick */ if (actim - reoff > 1) @@ -184,7 +185,8 @@ static int calc_wr_timings(struct extif_timings *t) int weon, weoff, wecyc; int div = t->clk_div; - /* Make sure that after conversion it still holds that: + /* + * Make sure that after conversion it still holds that: * weoff > weon, wecyc >= weoff */ weon = ps_to_sossi_ticks(t->we_on_time, div); @@ -367,7 +369,8 @@ static void sossi_set_bits_per_cycle(int bpc) { int bus_pick_count, bus_pick_width; - /* We set explicitly the the bus_pick_count as well, although + /* + * We set explicitly the the bus_pick_count as well, although * with remapping/reordering disabled it will be calculated by HW * as (32 / bus_pick_width). */ @@ -500,7 +503,8 @@ static void sossi_transfer_area(int width, int height, sossi_start_transfer(); if (sossi.tearsync_mode) { - /* Wait for the sync signal and start the transfer only + /* + * Wait for the sync signal and start the transfer only * then. We can't seem to be able to use HW sync DMA for * this since LCD DMA shows huge latencies, as if it * would ignore some of the DMA requests from SoSSI. @@ -580,7 +584,8 @@ static int sossi_init(struct omapfb_device *fbdev) dev_err(fbdev->dev, "can't get DPLL1OUT clock\n"); return PTR_ERR(dpll1out_ck); } - /* We need the parent clock rate, which we might divide further + /* + * We need the parent clock rate, which we might divide further * depending on the timing requirements of the controller. See * _set_timings. */ -- 2.41.0