From e139b0b02fd35a68c4353db34d3380c8a7c9a90d Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 7 Feb 2007 18:17:37 +0100 Subject: [PATCH] hpt366: rework rate filtering - Rework hpt3xx_ratemask() and hpt3xx_ratefilter() so that the former returns the max. mode computed at the load time and doesn't have to do bad Ultra33 drive list lookups anymore; remove the duplicate code from the latter function. Move the quirky drive list lookup into hpt3xx_quirkproc() where it should have been from the start... - Disable UltraATA/100 for HPT370 by default as the 33 MHz ATA clock being used does not allow for it, and this *greatly* increases the transfer speed. - Save some space by using byte-wide fields in struct hpt_info; switch to reading the 8-bit PCI revision ID reg. only, not the whole 32-bit reg. - Start incrementing the driver version number with each patch (should have been done from the first one posted). Signed-off-by: Sergei Shtylyov Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 179 +++++++++++++++++++-------------------- 1 file changed, 85 insertions(+), 94 deletions(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index b486442dd5d..49ae9f6d218 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * linux/drivers/ide/pci/hpt366.c Version 0.43 May 17, 2006 * * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -62,8 +62,8 @@ * be done on 66 MHz PCI bus * - avoid calibrating PLL twice as the second time results in a wrong PCI * frequency and thus in the wrong timings for the secondary channel - * - disable UltraATA/133 for HPT372 by default (50 MHz DPLL clock do not - * allow for this speed anyway) + * - disable UltraATA/133 for HPT372 and UltraATA/100 for HPT370 by default + * as the ATA clock being used does not allow for this speed anyway * - add support for HPT302N and HPT371N clocking (the same as for HPT372N) * - HPT371/N are single channel chips, so avoid touching the primary channel * which exists only virtually (there's no pins for it) @@ -76,6 +76,7 @@ * and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead * - pass to init_chipset() handlers a copy of the IDE PCI device structure as * they tamper with its fields + * - optimize the rate masking/filtering and the drive list lookup code * * */ @@ -336,7 +337,7 @@ static u32 sixty_six_base_hpt37x[] = { #define HPT371_ALLOW_ATA133_6 0 #define HPT302_ALLOW_ATA133_6 0 #define HPT372_ALLOW_ATA133_6 0 -#define HPT370_ALLOW_ATA100_5 1 +#define HPT370_ALLOW_ATA100_5 0 #define HPT366_ALLOW_ATA66_4 1 #define HPT366_ALLOW_ATA66_3 1 #define HPT366_MAX_DEVS 8 @@ -354,8 +355,8 @@ static u32 sixty_six_base_hpt37x[] = { struct hpt_info { u8 max_mode; /* Speeds allowed */ - int revision; /* Chipset revision */ - int flags; /* Chipset properties */ + u8 revision; /* Chipset revision */ + u8 flags; /* Chipset properties */ #define PLL_MODE 1 #define IS_3xxN 2 #define PCI_66MHZ 4 @@ -364,61 +365,50 @@ struct hpt_info }; /* - * This wants fixing so that we do everything not by classrev + * This wants fixing so that we do everything not by revision * (which breaks on the newest chips) but by creating an * enumeration of chip variants and using that */ -static __devinit u32 hpt_revision (struct pci_dev *dev) +static __devinit u8 hpt_revision(struct pci_dev *dev) { - u32 class_rev; - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xff; + u8 rev = 0; + + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); switch(dev->device) { /* Remap new 372N onto 372 */ case PCI_DEVICE_ID_TTI_HPT372N: - class_rev = PCI_DEVICE_ID_TTI_HPT372; break; + rev = PCI_DEVICE_ID_TTI_HPT372; break; case PCI_DEVICE_ID_TTI_HPT374: - class_rev = PCI_DEVICE_ID_TTI_HPT374; break; + rev = PCI_DEVICE_ID_TTI_HPT374; break; case PCI_DEVICE_ID_TTI_HPT371: - class_rev = PCI_DEVICE_ID_TTI_HPT371; break; + rev = PCI_DEVICE_ID_TTI_HPT371; break; case PCI_DEVICE_ID_TTI_HPT302: - class_rev = PCI_DEVICE_ID_TTI_HPT302; break; + rev = PCI_DEVICE_ID_TTI_HPT302; break; case PCI_DEVICE_ID_TTI_HPT372: - class_rev = PCI_DEVICE_ID_TTI_HPT372; break; + rev = PCI_DEVICE_ID_TTI_HPT372; break; default: break; } - return class_rev; + return rev; } -static int check_in_drive_lists(ide_drive_t *drive, const char **list); +static int check_in_drive_list(ide_drive_t *drive, const char **list) +{ + struct hd_driveid *id = drive->id; + + while (*list) + if (!strcmp(*list++,id->model)) + return 1; + return 0; +} -static u8 hpt3xx_ratemask (ide_drive_t *drive) +static u8 hpt3xx_ratemask(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - struct hpt_info *info = ide_get_hwifdata(hwif); - u8 mode = 0; - - /* FIXME: TODO - move this to set info->mode once at boot */ - - if (info->revision >= 8) { /* HPT374 */ - mode = (HPT374_ALLOW_ATA133_6) ? 4 : 3; - } else if (info->revision >= 7) { /* HPT371 */ - mode = (HPT371_ALLOW_ATA133_6) ? 4 : 3; - } else if (info->revision >= 6) { /* HPT302 */ - mode = (HPT302_ALLOW_ATA133_6) ? 4 : 3; - } else if (info->revision >= 5) { /* HPT372 */ - mode = (HPT372_ALLOW_ATA133_6) ? 4 : 3; - } else if (info->revision >= 4) { /* HPT370A */ - mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2; - } else if (info->revision >= 3) { /* HPT370 */ - mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2; - mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : mode; - } else { /* HPT366 and HPT368 */ - mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : 2; - } + struct hpt_info *info = ide_get_hwifdata(HWIF(drive)); + u8 mode = info->max_mode; + if (!eighty_ninty_three(drive) && mode) mode = min(mode, (u8)1); return mode; @@ -429,16 +419,15 @@ static u8 hpt3xx_ratemask (ide_drive_t *drive) * either PIO or UDMA modes 0,4,5 */ -static u8 hpt3xx_ratefilter (ide_drive_t *drive, u8 speed) +static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed) { - ide_hwif_t *hwif = drive->hwif; - struct hpt_info *info = ide_get_hwifdata(hwif); + struct hpt_info *info = ide_get_hwifdata(HWIF(drive)); u8 mode = hpt3xx_ratemask(drive); if (drive->media != ide_disk) return min(speed, (u8)XFER_PIO_4); - switch(mode) { + switch (mode) { case 0x04: speed = min(speed, (u8)XFER_UDMA_6); break; @@ -446,33 +435,34 @@ static u8 hpt3xx_ratefilter (ide_drive_t *drive, u8 speed) speed = min(speed, (u8)XFER_UDMA_5); if (info->revision >= 5) break; - if (check_in_drive_lists(drive, bad_ata100_5)) - speed = min(speed, (u8)XFER_UDMA_4); - break; + if (!check_in_drive_list(drive, bad_ata100_5)) + goto check_bad_ata33; + /* fall thru */ case 0x02: speed = min(speed, (u8)XFER_UDMA_4); /* * CHECK ME, Does this need to be set to 5 ?? */ if (info->revision >= 3) - break; - if ((check_in_drive_lists(drive, bad_ata66_4)) || - (!(HPT366_ALLOW_ATA66_4))) - speed = min(speed, (u8)XFER_UDMA_3); - if ((check_in_drive_lists(drive, bad_ata66_3)) || - (!(HPT366_ALLOW_ATA66_3))) - speed = min(speed, (u8)XFER_UDMA_2); - break; + goto check_bad_ata33; + if (HPT366_ALLOW_ATA66_4 && + !check_in_drive_list(drive, bad_ata66_4)) + goto check_bad_ata33; + + speed = min(speed, (u8)XFER_UDMA_3); + if (HPT366_ALLOW_ATA66_3 && + !check_in_drive_list(drive, bad_ata66_3)) + goto check_bad_ata33; + /* fall thru */ case 0x01: speed = min(speed, (u8)XFER_UDMA_2); - /* - * CHECK ME, Does this need to be set to 5 ?? - */ - if (info->revision >= 3) + + check_bad_ata33: + if (info->revision >= 4) break; - if (check_in_drive_lists(drive, bad_ata33)) - speed = min(speed, (u8)XFER_MW_DMA_2); - break; + if (!check_in_drive_list(drive, bad_ata33)) + break; + /* fall thru */ case 0x00: default: speed = min(speed, (u8)XFER_MW_DMA_2); @@ -481,22 +471,6 @@ static u8 hpt3xx_ratefilter (ide_drive_t *drive, u8 speed) return speed; } -static int check_in_drive_lists (ide_drive_t *drive, const char **list) -{ - struct hd_driveid *id = drive->id; - - if (quirk_drives == list) { - while (*list) - if (strstr(id->model, *list++)) - return 1; - } else { - while (*list) - if (!strcmp(*list++,id->model)) - return 1; - } - return 0; -} - static u32 pci_bus_clock_list(u8 speed, u32 *chipset_table) { int i; @@ -671,9 +645,15 @@ static int config_chipset_for_dma (ide_drive_t *drive) return ide_dma_enable(drive); } -static int hpt3xx_quirkproc (ide_drive_t *drive) +static int hpt3xx_quirkproc(ide_drive_t *drive) { - return ((int) check_in_drive_lists(drive, quirk_drives)); + struct hd_driveid *id = drive->id; + const char **list = quirk_drives; + + while (*list) + if (strstr(id->model, *list++)) + return 1; + return 0; } static void hpt3xx_intrproc (ide_drive_t *drive) @@ -1381,7 +1361,7 @@ static void __devinit init_iops_hpt366(ide_hwif_t *hwif) struct hpt_info *info = kzalloc(sizeof(struct hpt_info), GFP_KERNEL); struct pci_dev *dev = hwif->pci_dev; u16 did = dev->device; - u8 rid = 0; + u8 mode, rid = 0; if(info == NULL) { printk(KERN_WARNING "hpt366: out of memory.\n"); @@ -1395,7 +1375,7 @@ static void __devinit init_iops_hpt366(ide_hwif_t *hwif) return; } - pci_read_config_byte(dev, PCI_CLASS_REVISION, &rid); + pci_read_config_byte(dev, PCI_REVISION_ID, &rid); if (( did == PCI_DEVICE_ID_TTI_HPT366 && rid == 6) || ((did == PCI_DEVICE_ID_TTI_HPT372 || @@ -1404,9 +1384,22 @@ static void __devinit init_iops_hpt366(ide_hwif_t *hwif) did == PCI_DEVICE_ID_TTI_HPT372N) info->flags |= IS_3xxN; - info->revision = hpt_revision(dev); - - if (info->revision >= 3) + rid = info->revision = hpt_revision(dev); + if (rid >= 8) /* HPT374 */ + mode = HPT374_ALLOW_ATA133_6 ? 4 : 3; + else if (rid >= 7) /* HPT371 and HPT371N */ + mode = HPT371_ALLOW_ATA133_6 ? 4 : 3; + else if (rid >= 6) /* HPT302 and HPT302N */ + mode = HPT302_ALLOW_ATA133_6 ? 4 : 3; + else if (rid >= 5) /* HPT372, HPT372A, and HPT372N */ + mode = HPT372_ALLOW_ATA133_6 ? 4 : 3; + else if (rid >= 3) /* HPT370 and HPT370A */ + mode = HPT370_ALLOW_ATA100_5 ? 3 : 2; + else /* HPT366 and HPT368 */ + mode = (HPT366_ALLOW_ATA66_4 || HPT366_ALLOW_ATA66_3) ? 2 : 1; + info->max_mode = mode; + + if (rid >= 3) hpt37x_clocking(hwif); else hpt366_clocking(hwif); @@ -1461,8 +1454,7 @@ static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d) static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) { struct pci_dev *findev = NULL; - u8 pin1 = 0, pin2 = 0; - unsigned int class_rev; + u8 rev = 0, pin1 = 0, pin2 = 0; char *chipset_names[] = {"HPT366", "HPT366", "HPT368", "HPT370", "HPT370A", "HPT372", "HPT372N" }; @@ -1470,16 +1462,15 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) if (PCI_FUNC(dev->devfn) & 1) return -ENODEV; - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xff; + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); if(dev->device == PCI_DEVICE_ID_TTI_HPT372N) - class_rev = 6; + rev = 6; - if(class_rev <= 6) - d->name = chipset_names[class_rev]; + if(rev <= 6) + d->name = chipset_names[rev]; - switch(class_rev) { + switch(rev) { case 6: case 5: case 4: -- 2.41.1