From 9492e13516f00340d7d01d81551eea8deb0b8d0e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 30 Apr 2008 00:54:15 -0700 Subject: [PATCH] riscom8: coding style Signed-off-by: Alan Cox Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/riscom8.c | 644 +++++++++++++++++++---------------------- 1 file changed, 304 insertions(+), 340 deletions(-) diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 221b5a29207..45e73bd8bd1 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -4,9 +4,9 @@ * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) * * This code is loosely based on the Linux serial driver, written by - * Linus Torvalds, Theodore T'so and others. The RISCom/8 card - * programming info was obtained from various drivers for other OSes - * (FreeBSD, ISC, etc), but no source code from those drivers were + * Linus Torvalds, Theodore T'so and others. The RISCom/8 card + * programming info was obtained from various drivers for other OSes + * (FreeBSD, ISC, etc), but no source code from those drivers were * directly included in this driver. * * @@ -33,7 +33,7 @@ #include -#include +#include #include #include #include @@ -49,7 +49,7 @@ #include #include -#include +#include #include "riscom8.h" #include "riscom8_reg.h" @@ -57,15 +57,15 @@ /* Am I paranoid or not ? ;-) */ #define RISCOM_PARANOIA_CHECK -/* - * Crazy InteliCom/8 boards sometimes has swapped CTS & DSR signals. +/* + * Crazy InteliCom/8 boards sometimes have swapped CTS & DSR signals. * You can slightly speed up things by #undefing the following option, - * if you are REALLY sure that your board is correct one. + * if you are REALLY sure that your board is correct one. */ #define RISCOM_BRAIN_DAMAGED_CTS -/* +/* * The following defines are mostly for testing purposes. But if you need * some nice reporting in your syslog, you can define them also. */ @@ -112,7 +112,7 @@ static unsigned short rc_ioport[] = { #define RC_NIOPORT ARRAY_SIZE(rc_ioport) -static inline int rc_paranoia_check(struct riscom_port const * port, +static int rc_paranoia_check(struct riscom_port const *port, char *name, const char *routine) { #ifdef RISCOM_PARANOIA_CHECK @@ -134,52 +134,53 @@ static inline int rc_paranoia_check(struct riscom_port const * port, } /* - * + * * Service functions for RISCom/8 driver. - * + * */ /* Get board number from pointer */ -static inline int board_No (struct riscom_board const * bp) +static inline int board_No(struct riscom_board const *bp) { return bp - rc_board; } /* Get port number from pointer */ -static inline int port_No (struct riscom_port const * port) +static inline int port_No(struct riscom_port const *port) { - return RC_PORT(port - rc_port); + return RC_PORT(port - rc_port); } /* Get pointer to board from pointer to port */ -static inline struct riscom_board * port_Board(struct riscom_port const * port) +static inline struct riscom_board *port_Board(struct riscom_port const *port) { return &rc_board[RC_BOARD(port - rc_port)]; } /* Input Byte from CL CD180 register */ -static inline unsigned char rc_in(struct riscom_board const * bp, unsigned short reg) +static inline unsigned char rc_in(struct riscom_board const *bp, + unsigned short reg) { return inb(bp->base + RC_TO_ISA(reg)); } /* Output Byte to CL CD180 register */ -static inline void rc_out(struct riscom_board const * bp, unsigned short reg, +static inline void rc_out(struct riscom_board const *bp, unsigned short reg, unsigned char val) { outb(val, bp->base + RC_TO_ISA(reg)); } /* Wait for Channel Command Register ready */ -static inline void rc_wait_CCR(struct riscom_board const * bp) +static void rc_wait_CCR(struct riscom_board const *bp) { unsigned long delay; /* FIXME: need something more descriptive then 100000 :) */ - for (delay = 100000; delay; delay--) + for (delay = 100000; delay; delay--) if (!rc_in(bp, CD180_CCR)) return; - + printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp)); } @@ -187,11 +188,11 @@ static inline void rc_wait_CCR(struct riscom_board const * bp) * RISCom/8 probe functions. */ -static inline int rc_request_io_range(struct riscom_board * const bp) +static int rc_request_io_range(struct riscom_board * const bp) { int i; - - for (i = 0; i < RC_NIOPORT; i++) + + for (i = 0; i < RC_NIOPORT; i++) if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1, "RISCom/8")) { goto out_release; @@ -200,42 +201,42 @@ static inline int rc_request_io_range(struct riscom_board * const bp) out_release: printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n", board_No(bp), bp->base); - while(--i >= 0) + while (--i >= 0) release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1); return 1; } -static inline void rc_release_io_range(struct riscom_board * const bp) +static void rc_release_io_range(struct riscom_board * const bp) { int i; - - for (i = 0; i < RC_NIOPORT; i++) + + for (i = 0; i < RC_NIOPORT; i++) release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1); } - + /* Reset and setup CD180 chip */ -static void __init rc_init_CD180(struct riscom_board const * bp) +static void __init rc_init_CD180(struct riscom_board const *bp) { unsigned long flags; - + spin_lock_irqsave(&riscom_lock, flags); - rc_out(bp, RC_CTOUT, 0); /* Clear timeout */ - rc_wait_CCR(bp); /* Wait for CCR ready */ - rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */ + rc_out(bp, RC_CTOUT, 0); /* Clear timeout */ + rc_wait_CCR(bp); /* Wait for CCR ready */ + rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */ spin_unlock_irqrestore(&riscom_lock, flags); - msleep(50); /* Delay 0.05 sec */ + msleep(50); /* Delay 0.05 sec */ spin_lock_irqsave(&riscom_lock, flags); - rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */ - rc_out(bp, CD180_GICR, 0); /* Clear all bits */ - rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */ - rc_out(bp, CD180_PILR2, RC_ACK_TINT); /* Prio for transmitter intr */ - rc_out(bp, CD180_PILR3, RC_ACK_RINT); /* Prio for receiver intr */ - + rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */ + rc_out(bp, CD180_GICR, 0); /* Clear all bits */ + rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */ + rc_out(bp, CD180_PILR2, RC_ACK_TINT); /* Prio for tx intr */ + rc_out(bp, CD180_PILR3, RC_ACK_RINT); /* Prio for rx intr */ + /* Setting up prescaler. We need 4 ticks per 1 ms */ rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8); rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff); - + spin_unlock_irqrestore(&riscom_lock, flags); } @@ -245,12 +246,12 @@ static int __init rc_probe(struct riscom_board *bp) unsigned char val1, val2; int irqs = 0; int retries; - + bp->irq = 0; if (rc_request_io_range(bp)) return 1; - + /* Are the I/O ports here ? */ rc_out(bp, CD180_PPRL, 0x5a); outb(0xff, 0x80); @@ -258,34 +259,34 @@ static int __init rc_probe(struct riscom_board *bp) rc_out(bp, CD180_PPRL, 0xa5); outb(0x00, 0x80); val2 = rc_in(bp, CD180_PPRL); - + if ((val1 != 0x5a) || (val2 != 0xa5)) { printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n", board_No(bp), bp->base); goto out_release; } - + /* It's time to find IRQ for this board */ - for (retries = 0; retries < 5 && irqs <= 0; retries++) { + for (retries = 0; retries < 5 && irqs <= 0; retries++) { irqs = probe_irq_on(); - rc_init_CD180(bp); /* Reset CD180 chip */ - rc_out(bp, CD180_CAR, 2); /* Select port 2 */ + rc_init_CD180(bp); /* Reset CD180 chip */ + rc_out(bp, CD180_CAR, 2); /* Select port 2 */ rc_wait_CCR(bp); - rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter */ - rc_out(bp, CD180_IER, IER_TXRDY); /* Enable tx empty intr */ + rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter */ + rc_out(bp, CD180_IER, IER_TXRDY);/* Enable tx empty intr */ msleep(50); irqs = probe_irq_off(irqs); - val1 = rc_in(bp, RC_BSR); /* Get Board Status reg */ - val2 = rc_in(bp, RC_ACK_TINT); /* ACK interrupt */ - rc_init_CD180(bp); /* Reset CD180 again */ - + val1 = rc_in(bp, RC_BSR); /* Get Board Status reg */ + val2 = rc_in(bp, RC_ACK_TINT); /* ACK interrupt */ + rc_init_CD180(bp); /* Reset CD180 again */ + if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX))) { printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not " "found.\n", board_No(bp), bp->base); goto out_release; } } - + if (irqs <= 0) { printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board " "at 0x%03x.\n", board_No(bp), bp->base); @@ -293,113 +294,112 @@ static int __init rc_probe(struct riscom_board *bp) } bp->irq = irqs; bp->flags |= RC_BOARD_PRESENT; - + printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at " "0x%03x, IRQ %d.\n", board_No(bp), (rc_in(bp, CD180_GFRCR) & 0x0f) + 'A', /* Board revision */ bp->base, bp->irq); - + return 0; out_release: rc_release_io_range(bp); return 1; } -/* - * +/* + * * Interrupt processing routines. - * + * */ -static inline struct riscom_port * rc_get_port(struct riscom_board const * bp, - unsigned char const * what) +static struct riscom_port *rc_get_port(struct riscom_board const *bp, + unsigned char const *what) { unsigned char channel; - struct riscom_port * port; - + struct riscom_port *port; + channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF; if (channel < CD180_NCH) { port = &rc_port[board_No(bp) * RC_NPORT + channel]; - if (port->flags & ASYNC_INITIALIZED) { + if (port->flags & ASYNC_INITIALIZED) return port; - } } - printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n", + printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n", board_No(bp), what, channel); return NULL; } -static inline void rc_receive_exc(struct riscom_board const * bp) +static void rc_receive_exc(struct riscom_board const *bp) { struct riscom_port *port; struct tty_struct *tty; unsigned char status; unsigned char ch, flag; - - if (!(port = rc_get_port(bp, "Receive"))) + + port = rc_get_port(bp, "Receive"); + if (port == NULL) return; tty = port->tty; - -#ifdef RC_REPORT_OVERRUN + +#ifdef RC_REPORT_OVERRUN status = rc_in(bp, CD180_RCSR); if (status & RCSR_OE) port->overrun++; status &= port->mark_mask; -#else +#else status = rc_in(bp, CD180_RCSR) & port->mark_mask; -#endif +#endif ch = rc_in(bp, CD180_RDR); - if (!status) { + if (!status) return; - } if (status & RCSR_TOUT) { printk(KERN_WARNING "rc%d: port %d: Receiver timeout. " - "Hardware problems ?\n", + "Hardware problems ?\n", board_No(bp), port_No(port)); return; - + } else if (status & RCSR_BREAK) { printk(KERN_INFO "rc%d: port %d: Handling break...\n", board_No(bp), port_No(port)); flag = TTY_BREAK; if (port->flags & ASYNC_SAK) do_SAK(tty); - - } else if (status & RCSR_PE) + + } else if (status & RCSR_PE) flag = TTY_PARITY; - - else if (status & RCSR_FE) + + else if (status & RCSR_FE) flag = TTY_FRAME; - - else if (status & RCSR_OE) + + else if (status & RCSR_OE) flag = TTY_OVERRUN; - else flag = TTY_NORMAL; - + tty_insert_flip_char(tty, ch, flag); tty_flip_buffer_push(tty); } -static inline void rc_receive(struct riscom_board const * bp) +static void rc_receive(struct riscom_board const *bp) { struct riscom_port *port; struct tty_struct *tty; unsigned char count; - - if (!(port = rc_get_port(bp, "Receive"))) + + port = rc_get_port(bp, "Receive"); + if (port == NULL) return; - + tty = port->tty; - + count = rc_in(bp, CD180_RDCR); - + #ifdef RC_REPORT_FIFO port->hits[count > 8 ? 9 : count]++; -#endif - +#endif + while (count--) { if (tty_buffer_request_room(tty, 1) == 0) { printk(KERN_WARNING "rc%d: port %d: Working around " @@ -412,26 +412,26 @@ static inline void rc_receive(struct riscom_board const * bp) tty_flip_buffer_push(tty); } -static inline void rc_transmit(struct riscom_board const * bp) +static void rc_transmit(struct riscom_board const *bp) { struct riscom_port *port; struct tty_struct *tty; unsigned char count; - - - if (!(port = rc_get_port(bp, "Transmit"))) + + port = rc_get_port(bp, "Transmit"); + if (port == NULL) return; - + tty = port->tty; - - if (port->IER & IER_TXEMPTY) { + + if (port->IER & IER_TXEMPTY) { /* FIFO drained */ rc_out(bp, CD180_CAR, port_No(port)); port->IER &= ~IER_TXEMPTY; rc_out(bp, CD180_IER, port->IER); return; } - + if ((port->xmit_cnt <= 0 && !port->break_length) || tty->stopped || tty->hw_stopped) { rc_out(bp, CD180_CAR, port_No(port)); @@ -439,7 +439,7 @@ static inline void rc_transmit(struct riscom_board const * bp) rc_out(bp, CD180_IER, port->IER); return; } - + if (port->break_length) { if (port->break_length > 0) { if (port->COR2 & COR2_ETC) { @@ -451,7 +451,8 @@ static inline void rc_transmit(struct riscom_board const * bp) rc_out(bp, CD180_TDR, CD180_C_ESC); rc_out(bp, CD180_TDR, CD180_C_DELAY); rc_out(bp, CD180_TDR, count); - if (!(port->break_length -= count)) + port->break_length -= count; + if (port->break_length == 0) port->break_length--; } else { rc_out(bp, CD180_TDR, CD180_C_ESC); @@ -463,7 +464,7 @@ static inline void rc_transmit(struct riscom_board const * bp) } return; } - + count = CD180_NFIFO; do { rc_out(bp, CD180_TDR, port->xmit_buf[port->xmit_tail++]); @@ -471,7 +472,7 @@ static inline void rc_transmit(struct riscom_board const * bp) if (--port->xmit_cnt <= 0) break; } while (--count > 0); - + if (port->xmit_cnt <= 0) { rc_out(bp, CD180_CAR, port_No(port)); port->IER &= ~IER_TXRDY; @@ -481,25 +482,26 @@ static inline void rc_transmit(struct riscom_board const * bp) tty_wakeup(tty); } -static inline void rc_check_modem(struct riscom_board const * bp) +static void rc_check_modem(struct riscom_board const *bp) { struct riscom_port *port; struct tty_struct *tty; unsigned char mcr; - - if (!(port = rc_get_port(bp, "Modem"))) + + port = rc_get_port(bp, "Modem"); + if (port == NULL) return; - + tty = port->tty; - + mcr = rc_in(bp, CD180_MCR); - if (mcr & MCR_CDCHG) { - if (rc_in(bp, CD180_MSVR) & MSVR_CD) + if (mcr & MCR_CDCHG) { + if (rc_in(bp, CD180_MSVR) & MSVR_CD) wake_up_interruptible(&port->open_wait); else tty_hangup(tty); } - + #ifdef RISCOM_BRAIN_DAMAGED_CTS if (mcr & MCR_CTSCHG) { if (rc_in(bp, CD180_MSVR) & MSVR_CTS) { @@ -526,13 +528,13 @@ static inline void rc_check_modem(struct riscom_board const * bp) rc_out(bp, CD180_IER, port->IER); } #endif /* RISCOM_BRAIN_DAMAGED_CTS */ - + /* Clear change bits */ rc_out(bp, CD180_MCR, 0); } /* The main interrupt processing routine */ -static irqreturn_t rc_interrupt(int dummy, void * dev_id) +static irqreturn_t rc_interrupt(int dummy, void *dev_id) { unsigned char status; unsigned char ack; @@ -547,13 +549,11 @@ static irqreturn_t rc_interrupt(int dummy, void * dev_id) (RC_BSR_TOUT | RC_BSR_TINT | RC_BSR_MINT | RC_BSR_RINT))) { handled = 1; - if (status & RC_BSR_TOUT) + if (status & RC_BSR_TOUT) printk(KERN_WARNING "rc%d: Got timeout. Hardware " "error?\n", board_No(bp)); - else if (status & RC_BSR_RINT) { ack = rc_in(bp, RC_ACK_RINT); - if (ack == (RC_ID | GIVR_IT_RCV)) rc_receive(bp); else if (ack == (RC_ID | GIVR_IT_REXC)) @@ -562,29 +562,23 @@ static irqreturn_t rc_interrupt(int dummy, void * dev_id) printk(KERN_WARNING "rc%d: Bad receive ack " "0x%02x.\n", board_No(bp), ack); - } else if (status & RC_BSR_TINT) { ack = rc_in(bp, RC_ACK_TINT); - if (ack == (RC_ID | GIVR_IT_TX)) rc_transmit(bp); else printk(KERN_WARNING "rc%d: Bad transmit ack " "0x%02x.\n", board_No(bp), ack); - } else /* if (status & RC_BSR_MINT) */ { ack = rc_in(bp, RC_ACK_MINT); - - if (ack == (RC_ID | GIVR_IT_MODEM)) + if (ack == (RC_ID | GIVR_IT_MODEM)) rc_check_modem(bp); else printk(KERN_WARNING "rc%d: Bad modem ack " "0x%02x.\n", board_No(bp), ack); - - } - + } rc_out(bp, CD180_EOIR, 0); /* Mark end of interrupt */ rc_out(bp, RC_CTOUT, 0); /* Clear timeout flag */ } @@ -596,24 +590,24 @@ static irqreturn_t rc_interrupt(int dummy, void * dev_id) */ /* Called with disabled interrupts */ -static int rc_setup_board(struct riscom_board * bp) +static int rc_setup_board(struct riscom_board *bp) { int error; - if (bp->flags & RC_BOARD_ACTIVE) + if (bp->flags & RC_BOARD_ACTIVE) return 0; - + error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED, "RISCom/8", bp); - if (error) + if (error) return error; - + rc_out(bp, RC_CTOUT, 0); /* Just in case */ bp->DTR = ~0; rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */ - + bp->flags |= RC_BOARD_ACTIVE; - + return 0; } @@ -622,40 +616,40 @@ static void rc_shutdown_board(struct riscom_board *bp) { if (!(bp->flags & RC_BOARD_ACTIVE)) return; - + bp->flags &= ~RC_BOARD_ACTIVE; - + free_irq(bp->irq, NULL); - + bp->DTR = ~0; rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */ - + } /* - * Setting up port characteristics. + * Setting up port characteristics. * Must be called with disabled interrupts */ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port) { - struct tty_struct *tty; + struct tty_struct *tty = port->tty; unsigned long baud; long tmp; unsigned char cor1 = 0, cor3 = 0; unsigned char mcor1 = 0, mcor2 = 0; - - if (!(tty = port->tty) || !tty->termios) + + if (tty == NULL || tty->termios == NULL) return; port->IER = 0; port->COR2 = 0; port->MSVR = MSVR_RTS; - + baud = tty_get_baud_rate(tty); - + /* Select port on the board */ rc_out(bp, CD180_CAR, port_No(port)); - + if (!baud) { /* Drop DTR & exit */ bp->DTR |= (1u << port_No(port)); @@ -666,69 +660,68 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port) bp->DTR &= ~(1u << port_No(port)); rc_out(bp, RC_DTR, bp->DTR); } - + /* - * Now we must calculate some speed depended things + * Now we must calculate some speed depended things */ - + /* Set baud rate for port */ tmp = (((RC_OSCFREQ + baud/2) / baud + CD180_TPC/2) / CD180_TPC); - rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff); - rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff); - rc_out(bp, CD180_RBPRL, tmp & 0xff); + rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff); + rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff); + rc_out(bp, CD180_RBPRL, tmp & 0xff); rc_out(bp, CD180_TBPRL, tmp & 0xff); - + baud = (baud + 5) / 10; /* Estimated CPS */ - + /* Two timer ticks seems enough to wakeup something like SLIP driver */ - tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO; + tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO; port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? SERIAL_XMIT_SIZE - 1 : tmp); - + /* Receiver timeout will be transmission time for 1.5 chars */ tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud; tmp = (tmp > 0xff) ? 0xff : tmp; rc_out(bp, CD180_RTPR, tmp); - - switch (C_CSIZE(tty)) { - case CS5: + + switch (C_CSIZE(tty)) { + case CS5: cor1 |= COR1_5BITS; break; - case CS6: + case CS6: cor1 |= COR1_6BITS; break; - case CS7: + case CS7: cor1 |= COR1_7BITS; break; - case CS8: + case CS8: cor1 |= COR1_8BITS; break; } - - if (C_CSTOPB(tty)) + if (C_CSTOPB(tty)) cor1 |= COR1_2SB; - + cor1 |= COR1_IGNORE; - if (C_PARENB(tty)) { + if (C_PARENB(tty)) { cor1 |= COR1_NORMPAR; - if (C_PARODD(tty)) + if (C_PARODD(tty)) cor1 |= COR1_ODDP; - if (I_INPCK(tty)) + if (I_INPCK(tty)) cor1 &= ~COR1_IGNORE; } /* Set marking of some errors */ port->mark_mask = RCSR_OE | RCSR_TOUT; - if (I_INPCK(tty)) + if (I_INPCK(tty)) port->mark_mask |= RCSR_FE | RCSR_PE; - if (I_BRKINT(tty) || I_PARMRK(tty)) + if (I_BRKINT(tty) || I_PARMRK(tty)) port->mark_mask |= RCSR_BREAK; - if (I_IGNPAR(tty)) + if (I_IGNPAR(tty)) port->mark_mask &= ~(RCSR_FE | RCSR_PE); - if (I_IGNBRK(tty)) { + if (I_IGNBRK(tty)) { port->mark_mask &= ~RCSR_BREAK; - if (I_IGNPAR(tty)) + if (I_IGNPAR(tty)) /* Real raw mode. Ignore all */ port->mark_mask &= ~RCSR_OE; } @@ -738,7 +731,8 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port) port->IER |= IER_DSR | IER_CTS; mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; - tty->hw_stopped = !(rc_in(bp, CD180_MSVR) & (MSVR_CTS|MSVR_DSR)); + tty->hw_stopped = !(rc_in(bp, CD180_MSVR) & + (MSVR_CTS|MSVR_DSR)); #else port->COR2 |= COR2_CTSAE; #endif @@ -761,13 +755,13 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port) mcor1 |= MCOR1_CDZD; mcor2 |= MCOR2_CDOD; } - - if (C_CREAD(tty)) + + if (C_CREAD(tty)) /* Enable receiver */ port->IER |= IER_RXD; - + /* Set input FIFO size (1-8 bytes) */ - cor3 |= RISCOM_RXFIFO; + cor3 |= RISCOM_RXFIFO; /* Setting up CD180 channel registers */ rc_out(bp, CD180_COR1, cor1); rc_out(bp, CD180_COR2, port->COR2); @@ -791,36 +785,30 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port) static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port) { unsigned long flags; - + if (port->flags & ASYNC_INITIALIZED) return 0; - + if (!port->xmit_buf) { /* We may sleep in get_zeroed_page() */ - unsigned long tmp; - - if (!(tmp = get_zeroed_page(GFP_KERNEL))) + unsigned long tmp = get_zeroed_page(GFP_KERNEL); + if (tmp == 0) return -ENOMEM; - - if (port->xmit_buf) { + if (port->xmit_buf) free_page(tmp); - return -ERESTARTSYS; - } - port->xmit_buf = (unsigned char *) tmp; + else + port->xmit_buf = (unsigned char *) tmp; } - spin_lock_irqsave(&riscom_lock, flags); - if (port->tty) + if (port->tty) clear_bit(TTY_IO_ERROR, &port->tty->flags); - - if (port->count == 1) + if (port->count == 1) bp->count++; - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; rc_change_speed(bp, port); port->flags |= ASYNC_INITIALIZED; - + spin_unlock_irqrestore(&riscom_lock, flags); return 0; } @@ -829,38 +817,39 @@ static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port) static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port) { struct tty_struct *tty; - - if (!(port->flags & ASYNC_INITIALIZED)) + + if (!(port->flags & ASYNC_INITIALIZED)) return; - + #ifdef RC_REPORT_OVERRUN printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n", board_No(bp), port_No(port), port->overrun); -#endif +#endif #ifdef RC_REPORT_FIFO { int i; - + printk(KERN_INFO "rc%d: port %d: FIFO hits [ ", board_No(bp), port_No(port)); - for (i = 0; i < 10; i++) { + for (i = 0; i < 10; i++) printk("%ld ", port->hits[i]); - } printk("].\n"); } -#endif +#endif if (port->xmit_buf) { free_page((unsigned long) port->xmit_buf); port->xmit_buf = NULL; } - if (!(tty = port->tty) || C_HUPCL(tty)) { + tty = port->tty; + + if (tty == NULL || C_HUPCL(tty)) { /* Drop DTR */ bp->DTR |= (1u << port_No(port)); rc_out(bp, RC_DTR, bp->DTR); } - - /* Select port */ + + /* Select port */ rc_out(bp, CD180_CAR, port_No(port)); /* Reset port */ rc_wait_CCR(bp); @@ -868,28 +857,26 @@ static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port) /* Disable all interrupts from this port */ port->IER = 0; rc_out(bp, CD180_IER, port->IER); - - if (tty) + + if (tty) set_bit(TTY_IO_ERROR, &tty->flags); port->flags &= ~ASYNC_INITIALIZED; - + if (--bp->count < 0) { printk(KERN_INFO "rc%d: rc_shutdown_port: " "bad board count: %d\n", board_No(bp), bp->count); bp->count = 0; } - /* * If this is the last opened port on the board * shutdown whole board */ - if (!bp->count) + if (!bp->count) rc_shutdown_board(bp); } - -static int block_til_ready(struct tty_struct *tty, struct file * filp, +static int block_til_ready(struct tty_struct *tty, struct file *filp, struct riscom_port *port) { DECLARE_WAITQUEUE(wait, current); @@ -921,7 +908,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, return 0; } - if (C_CLOCAL(tty)) + if (C_CLOCAL(tty)) do_clocal = 1; /* @@ -959,7 +946,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else - retval = -ERESTARTSYS; + retval = -ERESTARTSYS; break; } if (!(port->flags & ASYNC_CLOSING) && @@ -978,41 +965,39 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, port->blocked_open--; if (retval) return retval; - + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; -} +} -static int rc_open(struct tty_struct * tty, struct file * filp) +static int rc_open(struct tty_struct *tty, struct file *filp) { int board; int error; - struct riscom_port * port; - struct riscom_board * bp; - + struct riscom_port *port; + struct riscom_board *bp; + board = RC_BOARD(tty->index); if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT)) return -ENODEV; - + bp = &rc_board[board]; port = rc_port + board * RC_NPORT + RC_PORT(tty->index); if (rc_paranoia_check(port, tty->name, "rc_open")) return -ENODEV; - - if ((error = rc_setup_board(bp))) + + error = rc_setup_board(bp); + if (error) return error; - + port->count++; tty->driver_data = port; port->tty = tty; - - if ((error = rc_setup_port(bp, port))) - return error; - - if ((error = block_til_ready(tty, filp, port))) - return error; - - return 0; + + error = rc_setup_port(bp, port); + if (error == 0) + error = block_til_ready(tty, filp, port); + return error; } static void rc_flush_buffer(struct tty_struct *tty) @@ -1024,22 +1009,19 @@ static void rc_flush_buffer(struct tty_struct *tty) return; spin_lock_irqsave(&riscom_lock, flags); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - spin_unlock_irqrestore(&riscom_lock, flags); tty_wakeup(tty); } - -static void rc_close(struct tty_struct * tty, struct file * filp) +static void rc_close(struct tty_struct *tty, struct file *filp) { struct riscom_port *port = (struct riscom_port *) tty->driver_data; struct riscom_board *bp; unsigned long flags; unsigned long timeout; - + if (!port || rc_paranoia_check(port, tty->name, "close")) return; @@ -1047,7 +1029,7 @@ static void rc_close(struct tty_struct * tty, struct file * filp) if (tty_hung_up_p(filp)) goto out; - + bp = port_Board(port); if ((tty->count == 1) && (port->count != 1)) { printk(KERN_INFO "rc%d: rc_close: bad port count;" @@ -1065,7 +1047,7 @@ static void rc_close(struct tty_struct * tty, struct file * filp) goto out; port->flags |= ASYNC_CLOSING; /* - * Now we wait for the transmit buffer to clear; and we notify + * Now we wait for the transmit buffer to clear; and we notify * the line discipline to only process XON/XOFF characters. */ tty->closing = 1; @@ -1088,8 +1070,8 @@ static void rc_close(struct tty_struct * tty, struct file * filp) * has completely drained; this is especially * important if there is a transmit FIFO! */ - timeout = jiffies+HZ; - while(port->IER & IER_TXEMPTY) { + timeout = jiffies + HZ; + while (port->IER & IER_TXEMPTY) { msleep_interruptible(jiffies_to_msecs(port->timeout)); if (time_after(jiffies, timeout)) break; @@ -1102,9 +1084,8 @@ static void rc_close(struct tty_struct * tty, struct file * filp) tty->closing = 0; port->tty = NULL; if (port->blocked_open) { - if (port->close_delay) { + if (port->close_delay) msleep_interruptible(jiffies_to_msecs(port->close_delay)); - } wake_up_interruptible(&port->open_wait); } port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); @@ -1114,17 +1095,17 @@ out: spin_unlock_irqrestore(&riscom_lock, flags); } -static int rc_write(struct tty_struct * tty, +static int rc_write(struct tty_struct *tty, const unsigned char *buf, int count) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; struct riscom_board *bp; int c, total = 0; unsigned long flags; - + if (rc_paranoia_check(port, tty->name, "rc_write")) return 0; - + bp = port_Board(port); if (!tty || !port->xmit_buf) @@ -1161,7 +1142,7 @@ static int rc_write(struct tty_struct * tty, return total; } -static int rc_put_char(struct tty_struct * tty, unsigned char ch) +static int rc_put_char(struct tty_struct *tty, unsigned char ch) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; unsigned long flags; @@ -1174,7 +1155,7 @@ static int rc_put_char(struct tty_struct * tty, unsigned char ch) return 0; spin_lock_irqsave(&riscom_lock, flags); - + if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) goto out; @@ -1188,14 +1169,14 @@ out: return ret; } -static void rc_flush_chars(struct tty_struct * tty) +static void rc_flush_chars(struct tty_struct *tty) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; unsigned long flags; - + if (rc_paranoia_check(port, tty->name, "rc_flush_chars")) return; - + if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || !port->xmit_buf) return; @@ -1209,11 +1190,11 @@ static void rc_flush_chars(struct tty_struct * tty) spin_unlock_irqrestore(&riscom_lock, flags); } -static int rc_write_room(struct tty_struct * tty) +static int rc_write_room(struct tty_struct *tty) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; int ret; - + if (rc_paranoia_check(port, tty->name, "rc_write_room")) return 0; @@ -1226,17 +1207,17 @@ static int rc_write_room(struct tty_struct * tty) static int rc_chars_in_buffer(struct tty_struct *tty) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; - + if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer")) return 0; - + return port->xmit_cnt; } static int rc_tiocmget(struct tty_struct *tty, struct file *file) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; - struct riscom_board * bp; + struct riscom_board *bp; unsigned char status; unsigned int result; unsigned long flags; @@ -1295,11 +1276,11 @@ static int rc_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static inline void rc_send_break(struct riscom_port * port, unsigned long length) +static void rc_send_break(struct riscom_port *port, unsigned long length) { struct riscom_board *bp = port_Board(port); unsigned long flags; - + spin_lock_irqsave(&riscom_lock, flags); port->break_length = RISCOM_TPS / HZ * length; @@ -1315,17 +1296,17 @@ static inline void rc_send_break(struct riscom_port * port, unsigned long length spin_unlock_irqrestore(&riscom_lock, flags); } -static inline int rc_set_serial_info(struct riscom_port * port, - struct serial_struct __user * newinfo) +static int rc_set_serial_info(struct riscom_port *port, + struct serial_struct __user *newinfo) { struct serial_struct tmp; struct riscom_board *bp = port_Board(port); int change_speed; - + if (copy_from_user(&tmp, newinfo, sizeof(tmp))) return -EFAULT; - -#if 0 + +#if 0 if ((tmp.irq != bp->irq) || (tmp.port != bp->base) || (tmp.type != PORT_CIRRUS) || @@ -1334,16 +1315,16 @@ static inline int rc_set_serial_info(struct riscom_port * port, (tmp.xmit_fifo_size != CD180_NFIFO) || (tmp.flags & ~RISCOM_LEGAL_FLAGS)) return -EINVAL; -#endif - +#endif + change_speed = ((port->flags & ASYNC_SPD_MASK) != (tmp.flags & ASYNC_SPD_MASK)); - + if (!capable(CAP_SYS_ADMIN)) { if ((tmp.close_delay != port->close_delay) || (tmp.closing_wait != port->closing_wait) || ((tmp.flags & ~ASYNC_USR_MASK) != - (port->flags & ~ASYNC_USR_MASK))) + (port->flags & ~ASYNC_USR_MASK))) return -EPERM; port->flags = ((port->flags & ~ASYNC_USR_MASK) | (tmp.flags & ASYNC_USR_MASK)); @@ -1363,12 +1344,12 @@ static inline int rc_set_serial_info(struct riscom_port * port, return 0; } -static inline int rc_get_serial_info(struct riscom_port * port, +static int rc_get_serial_info(struct riscom_port *port, struct serial_struct __user *retinfo) { struct serial_struct tmp; struct riscom_board *bp = port_Board(port); - + memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_CIRRUS; tmp.line = port - rc_port; @@ -1382,19 +1363,18 @@ static inline int rc_get_serial_info(struct riscom_port * port, return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0; } -static int rc_ioctl(struct tty_struct * tty, struct file * filp, +static int rc_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) - { struct riscom_port *port = (struct riscom_port *)tty->driver_data; void __user *argp = (void __user *)arg; int retval = 0; - + if (rc_paranoia_check(port, tty->name, "rc_ioctl")) return -ENODEV; - + switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ + case TCSBRK: /* SVID version: non-zero arg --> no break */ retval = tty_check_change(tty); if (retval) return retval; @@ -1402,42 +1382,40 @@ static int rc_ioctl(struct tty_struct * tty, struct file * filp, if (!arg) rc_send_break(port, HZ/4); /* 1/4 second */ break; - case TCSBRKP: /* support for POSIX tcsendbreak() */ + case TCSBRKP: /* support for POSIX tcsendbreak() */ retval = tty_check_change(tty); if (retval) return retval; tty_wait_until_sent(tty, 0); rc_send_break(port, arg ? arg*(HZ/10) : HZ/4); break; - case TIOCGSERIAL: - lock_kernel(); + case TIOCGSERIAL: + lock_kernel(); retval = rc_get_serial_info(port, argp); unlock_kernel(); break; - case TIOCSSERIAL: - lock_kernel(); + case TIOCSSERIAL: + lock_kernel(); retval = rc_set_serial_info(port, argp); unlock_kernel(); break; - default: + default: retval = -ENOIOCTLCMD; } return retval; } -static void rc_throttle(struct tty_struct * tty) +static void rc_throttle(struct tty_struct *tty) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; struct riscom_board *bp; unsigned long flags; - + if (rc_paranoia_check(port, tty->name, "rc_throttle")) return; - bp = port_Board(port); spin_lock_irqsave(&riscom_lock, flags); - port->MSVR &= ~MSVR_RTS; rc_out(bp, CD180_CAR, port_No(port)); if (I_IXOFF(tty)) { @@ -1446,23 +1424,20 @@ static void rc_throttle(struct tty_struct * tty) rc_wait_CCR(bp); } rc_out(bp, CD180_MSVR, port->MSVR); - spin_unlock_irqrestore(&riscom_lock, flags); } -static void rc_unthrottle(struct tty_struct * tty) +static void rc_unthrottle(struct tty_struct *tty) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; struct riscom_board *bp; unsigned long flags; - + if (rc_paranoia_check(port, tty->name, "rc_unthrottle")) return; - bp = port_Board(port); - - spin_lock_irqsave(&riscom_lock, flags); + spin_lock_irqsave(&riscom_lock, flags); port->MSVR |= MSVR_RTS; rc_out(bp, CD180_CAR, port_No(port)); if (I_IXOFF(tty)) { @@ -1471,62 +1446,58 @@ static void rc_unthrottle(struct tty_struct * tty) rc_wait_CCR(bp); } rc_out(bp, CD180_MSVR, port->MSVR); - spin_unlock_irqrestore(&riscom_lock, flags); } -static void rc_stop(struct tty_struct * tty) +static void rc_stop(struct tty_struct *tty) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; struct riscom_board *bp; unsigned long flags; - + if (rc_paranoia_check(port, tty->name, "rc_stop")) return; - + bp = port_Board(port); - - spin_lock_irqsave(&riscom_lock, flags); + spin_lock_irqsave(&riscom_lock, flags); port->IER &= ~IER_TXRDY; rc_out(bp, CD180_CAR, port_No(port)); rc_out(bp, CD180_IER, port->IER); - spin_unlock_irqrestore(&riscom_lock, flags); } -static void rc_start(struct tty_struct * tty) +static void rc_start(struct tty_struct *tty) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; struct riscom_board *bp; unsigned long flags; - + if (rc_paranoia_check(port, tty->name, "rc_start")) return; - + bp = port_Board(port); - + spin_lock_irqsave(&riscom_lock, flags); - if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) { + if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) { port->IER |= IER_TXRDY; rc_out(bp, CD180_CAR, port_No(port)); rc_out(bp, CD180_IER, port->IER); } - spin_unlock_irqrestore(&riscom_lock, flags); } -static void rc_hangup(struct tty_struct * tty) +static void rc_hangup(struct tty_struct *tty) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; struct riscom_board *bp; - + if (rc_paranoia_check(port, tty->name, "rc_hangup")) return; - + bp = port_Board(port); - + rc_shutdown_port(bp, port); port->count = 0; port->flags &= ~ASYNC_NORMAL_ACTIVE; @@ -1534,17 +1505,14 @@ static void rc_hangup(struct tty_struct * tty) wake_up_interruptible(&port->open_wait); } -static void rc_set_termios(struct tty_struct * tty, struct ktermios * old_termios) +static void rc_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) { struct riscom_port *port = (struct riscom_port *)tty->driver_data; unsigned long flags; - + if (rc_paranoia_check(port, tty->name, "rc_set_termios")) return; - - if (tty->termios->c_cflag == old_termios->c_cflag && - tty->termios->c_iflag == old_termios->c_iflag) - return; spin_lock_irqsave(&riscom_lock, flags); rc_change_speed(port_Board(port), port); @@ -1583,9 +1551,9 @@ static int __init rc_init_drivers(void) int i; riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT); - if (!riscom_driver) + if (!riscom_driver) return -ENOMEM; - + riscom_driver->owner = THIS_MODULE; riscom_driver->name = "ttyL"; riscom_driver->major = RISCOM8_NORMAL_MAJOR; @@ -1598,23 +1566,21 @@ static int __init rc_init_drivers(void) riscom_driver->init_termios.c_ospeed = 9600; riscom_driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(riscom_driver, &riscom_ops); - if ((error = tty_register_driver(riscom_driver))) { + error = tty_register_driver(riscom_driver); + if (error != 0) { put_tty_driver(riscom_driver); printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, " - "error = %d\n", - error); + "error = %d\n", error); return 1; } - memset(rc_port, 0, sizeof(rc_port)); for (i = 0; i < RC_NPORT * RC_NBOARD; i++) { rc_port[i].magic = RISCOM8_MAGIC; - rc_port[i].close_delay = 50 * HZ/100; - rc_port[i].closing_wait = 3000 * HZ/100; + rc_port[i].close_delay = 50 * HZ / 100; + rc_port[i].closing_wait = 3000 * HZ / 100; init_waitqueue_head(&rc_port[i].open_wait); init_waitqueue_head(&rc_port[i].close_wait); } - return 0; } @@ -1627,13 +1593,13 @@ static void rc_release_drivers(void) #ifndef MODULE /* * Called at boot time. - * + * * You can specify IO base for up to RC_NBOARD cards, * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt. * Note that there will be no probing at default * addresses in this case. * - */ + */ static int __init riscom8_setup(char *str) { int ints[RC_NBOARD]; @@ -1644,7 +1610,7 @@ static int __init riscom8_setup(char *str) for (i = 0; i < RC_NBOARD; i++) { if (i < ints[0]) rc_board[i].base = ints[i+1]; - else + else rc_board[i].base = 0; } return 1; @@ -1659,8 +1625,8 @@ static char banner[] __initdata = static char no_boards_msg[] __initdata = KERN_INFO "rc: No RISCom/8 boards detected.\n"; -/* - * This routine must be called by kernel at boot time +/* + * This routine must be called by kernel at boot time */ static int __init riscom8_init(void) { @@ -1669,13 +1635,12 @@ static int __init riscom8_init(void) printk(banner); - if (rc_init_drivers()) + if (rc_init_drivers()) return -EIO; - for (i = 0; i < RC_NBOARD; i++) - if (rc_board[i].base && !rc_probe(&rc_board[i])) + for (i = 0; i < RC_NBOARD; i++) + if (rc_board[i].base && !rc_probe(&rc_board[i])) found++; - if (!found) { rc_release_drivers(); printk(no_boards_msg); @@ -1702,13 +1667,13 @@ MODULE_LICENSE("GPL"); * by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter. * */ -static int __init riscom8_init_module (void) +static int __init riscom8_init_module(void) { #ifdef MODULE int i; if (iobase || iobase1 || iobase2 || iobase3) { - for(i = 0; i < RC_NBOARD; i++) + for (i = 0; i < RC_NBOARD; i++) rc_board[i].base = 0; } @@ -1724,18 +1689,17 @@ static int __init riscom8_init_module (void) return riscom8_init(); } - -static void __exit riscom8_exit_module (void) + +static void __exit riscom8_exit_module(void) { int i; - + rc_release_drivers(); - for (i = 0; i < RC_NBOARD; i++) - if (rc_board[i].flags & RC_BOARD_PRESENT) + for (i = 0; i < RC_NBOARD; i++) + if (rc_board[i].flags & RC_BOARD_PRESENT) rc_release_io_range(&rc_board[i]); - + } module_init(riscom8_init_module); module_exit(riscom8_exit_module); - -- 2.41.0