From 92e015cb31c0a312bf2e0e5b96aef76a8c57e645 Mon Sep 17 00:00:00 2001 From: =?utf8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Wed, 31 Oct 2007 15:09:05 +0100 Subject: [PATCH] leds: hw acceleration for Clevo mail LED driver MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Add support for hardware accelerated LED blinking for the mail LED commonly found on Clevo notebooks. Signed-off-by: Márton Németh Signed-off-by: Richard Purdie --- drivers/leds/Kconfig | 8 +++++--- drivers/leds/leds-clevo-mail.c | 37 ++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+), 3 deletions(-) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 659448ead68..922c3df548a 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -122,9 +122,11 @@ config LEDS_CLEVO_MAIL programs through the leds subsystem. This LED have three known mode: off, blink at 0.5Hz and blink at 1Hz. - As this LED cannot change it's brightness it blinks instead. - The brightness value 0 means off, 1..127 means blink at 0.5Hz - and 128..255 means blink at 1Hz. + The driver supports two kinds of interface: using ledtrig-timer + or through /sys/class/leds/clevo::mail/brightness. As this LED + cannot change it's brightness it blinks instead. The brightness + value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means + blink at 1Hz. This module can drive the mail LED for the following notebooks: diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c index 49a7972459c..6c3d33b8e38 100644 --- a/drivers/leds/leds-clevo-mail.c +++ b/drivers/leds/leds-clevo-mail.c @@ -92,9 +92,46 @@ static void clevo_mail_led_set(struct led_classdev *led_cdev, } +static int clevo_mail_led_blink(struct led_classdev *led_cdev, + unsigned long* delay_on, + unsigned long* delay_off) +{ + int status = -EINVAL; + + if (*delay_on == 0 /* ms */ && *delay_off == 0 /* ms */) { + /* Special case: the leds subsystem requested us to + * chose one user friendly blinking of the LED, and + * start it. Let's blink the led slowly (0.5Hz). + */ + *delay_on = 1000; /* ms */ + *delay_off = 1000; /* ms */ + i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ); + status = 0; + + } else if (*delay_on == 500 /* ms */ && *delay_off == 500 /* ms */) { + /* blink the led with 1Hz */ + i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ); + status = 0; + + } else if (*delay_on == 1000 /* ms */ && *delay_off == 1000 /* ms */) { + /* blink the led with 0.5Hz */ + i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ); + status = 0; + + } else { + printk(KERN_DEBUG KBUILD_MODNAME + ": clevo_mail_led_blink(..., %lu, %lu)," + " returning -EINVAL (unsupported)\n", + *delay_on, *delay_off); + } + + return status; +} + static struct led_classdev clevo_mail_led = { .name = "clevo::mail", .brightness_set = clevo_mail_led_set, + .blink_set = clevo_mail_led_blink, }; static int __init clevo_mail_led_probe(struct platform_device *pdev) -- 2.41.0