From 901dda2b5f0dfbd310d22d497ec8826d4c60363b Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Wed, 21 Feb 2007 00:10:20 +0100 Subject: [PATCH] r8169: remove the media option It has been documented as deprecated: - in MODULE_PARM_DESC since may 2005 ; - at the top of the source file and in printk since june 2004. Good bye. Signed-off-by: Francois Romieu Cc: Edward Hsu --- drivers/net/r8169.c | 72 ++++----------------------------------------- 1 file changed, 5 insertions(+), 67 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 49e599bc3f4..2ac532a6ed3 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -7,19 +7,6 @@ Feb 4 2002 - created initially by ShuChen . May 20 2002 - Add link status force-mode and TBI mode support. 2004 - Massive updates. See kernel SCM system for details. -========================================================================= - 1. [DEPRECATED: use ethtool instead] The media can be forced in 5 modes. - Command: 'insmod r8169 media = SET_MEDIA' - Ex: 'insmod r8169 media = 0x04' will force PHY to operate in 100Mpbs Half-duplex. - - SET_MEDIA can be: - _10_Half = 0x01 - _10_Full = 0x02 - _100_Half = 0x04 - _100_Full = 0x08 - _1000_Full = 0x10 - - 2. Support TBI mode. ========================================================================= VERSION 1.1 <2002/10/4> @@ -108,11 +95,6 @@ VERSION 2.2LK <2005/01/25> #define rtl8169_rx_quota(count, quota) count #endif -/* media options */ -#define MAX_UNITS 8 -static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 }; -static int num_media = 0; - /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ static const int max_interrupt_work = 20; @@ -364,13 +346,6 @@ enum RTL8169_register_content { LinkStatus = 0x02, FullDup = 0x01, - /* _MediaType */ - _10_Half = 0x01, - _10_Full = 0x02, - _100_Half = 0x04, - _100_Full = 0x08, - _1000_Full = 0x10, - /* _TBICSRBit */ TBILinkOK = 0x02000000, @@ -472,8 +447,6 @@ struct rtl8169_private { MODULE_AUTHOR("Realtek and the Linux r8169 crew "); MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver"); -module_param_array(media, int, &num_media, 0); -MODULE_PARM_DESC(media, "force phy operation. Deprecated by ethtool (8)."); module_param(rx_copybreak, int, 0); MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); module_param(use_dac, int, 0); @@ -601,38 +574,6 @@ static void rtl8169_check_link_status(struct net_device *dev, spin_unlock_irqrestore(&tp->lock, flags); } -static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex) -{ - struct { - u16 speed; - u8 duplex; - u8 autoneg; - u8 media; - } link_settings[] = { - { SPEED_10, DUPLEX_HALF, AUTONEG_DISABLE, _10_Half }, - { SPEED_10, DUPLEX_FULL, AUTONEG_DISABLE, _10_Full }, - { SPEED_100, DUPLEX_HALF, AUTONEG_DISABLE, _100_Half }, - { SPEED_100, DUPLEX_FULL, AUTONEG_DISABLE, _100_Full }, - { SPEED_1000, DUPLEX_FULL, AUTONEG_DISABLE, _1000_Full }, - /* Make TBI happy */ - { SPEED_1000, DUPLEX_FULL, AUTONEG_ENABLE, 0xff } - }, *p; - unsigned char option; - - option = ((idx < MAX_UNITS) && (idx >= 0)) ? media[idx] : 0xff; - - if ((option != 0xff) && !idx && netif_msg_drv(&debug)) - printk(KERN_WARNING PFX "media option is deprecated.\n"); - - for (p = link_settings; p->media != 0xff; p++) { - if (p->media == option) - break; - } - *autoneg = p->autoneg; - *speed = p->speed; - *duplex = p->duplex; -} - static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct rtl8169_private *tp = netdev_priv(dev); @@ -1425,11 +1366,6 @@ static void rtl8169_phy_reset(struct net_device *dev, static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp) { void __iomem *ioaddr = tp->mmio_addr; - static int board_idx = -1; - u8 autoneg, duplex; - u16 speed; - - board_idx++; rtl8169_hw_phy_config(dev); @@ -1448,11 +1384,13 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp) mdio_write(ioaddr, 0x0b, 0x0000); //w 0x0b 15 0 0 } - rtl8169_link_option(board_idx, &autoneg, &speed, &duplex); - rtl8169_phy_reset(dev, tp); - rtl8169_set_speed(dev, autoneg, speed, duplex); + /* + * rtl8169_set_speed_xmii takes good care of the Fast Ethernet + * only 8101. Don't panic. + */ + rtl8169_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL); if ((RTL_R8(PHYstatus) & TBI_Enable) && netif_msg_link(tp)) printk(KERN_INFO PFX "%s: TBI auto-negotiating\n", dev->name); -- 2.41.0