From 8e4e1d8054b037e867849162ba78cf9b153b0dcc Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 19 Feb 2009 04:49:29 -0300 Subject: [PATCH] V4L/DVB (10718): bt866: convert to v4l2_subdev. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt866.c | 233 +++++++++++++++++--------------- include/media/v4l2-chip-ident.h | 3 + 2 files changed, 126 insertions(+), 110 deletions(-) diff --git a/drivers/media/video/bt866.c b/drivers/media/video/bt866.c index 1df24c8776f..18d383877ec 100644 --- a/drivers/media/video/bt866.c +++ b/drivers/media/video/bt866.c @@ -34,9 +34,9 @@ #include #include #include -#include -#include -#include +#include +#include +#include #include MODULE_DESCRIPTION("Brooktree-866 video encoder driver"); @@ -47,21 +47,25 @@ static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); +static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; + +I2C_CLIENT_INSMOD; + /* ----------------------------------------------------------------------- */ struct bt866 { + struct v4l2_subdev sd; u8 reg[256]; - - v4l2_std_id norm; - int bright; - int contrast; - int hue; - int sat; }; -static int bt866_write(struct i2c_client *client, u8 subaddr, u8 data) +static inline struct bt866 *to_bt866(struct v4l2_subdev *sd) { - struct bt866 *encoder = i2c_get_clientdata(client); + return container_of(sd, struct bt866, sd); +} + +static int bt866_write(struct bt866 *encoder, u8 subaddr, u8 data) +{ + struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd); u8 buffer[2]; int err; @@ -88,119 +92,125 @@ static int bt866_write(struct i2c_client *client, u8 subaddr, u8 data) return 0; } -static int bt866_command(struct i2c_client *client, unsigned cmd, void *arg) +static int bt866_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) { - struct bt866 *encoder = i2c_get_clientdata(client); - - switch (cmd) { - case VIDIOC_INT_S_STD_OUTPUT: - { - v4l2_std_id *iarg = arg; - - v4l_dbg(1, debug, client, "set norm %llx\n", *iarg); + v4l2_dbg(1, debug, sd, "set norm %llx\n", std); - if (!(*iarg & (V4L2_STD_NTSC | V4L2_STD_PAL))) - return -EINVAL; - encoder->norm = *iarg; - break; - } + /* Only PAL supported by this driver at the moment! */ + if (!(std & V4L2_STD_NTSC)) + return -EINVAL; + return 0; +} - case VIDIOC_INT_S_VIDEO_ROUTING: - { - struct v4l2_routing *route = arg; - static const __u8 init[] = { - 0xc8, 0xcc, /* CRSCALE */ - 0xca, 0x91, /* CBSCALE */ - 0xcc, 0x24, /* YC16 | OSDNUM */ - 0xda, 0x00, /* */ - 0xdc, 0x24, /* SETMODE | PAL */ - 0xde, 0x02, /* EACTIVE */ - - /* overlay colors */ - 0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */ - 0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */ - 0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */ - 0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */ - 0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */ - 0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */ - 0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */ - 0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */ - - 0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */ - 0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */ - 0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */ - 0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */ - 0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */ - 0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */ - 0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */ - 0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */ - }; - int i; - u8 val; - - for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2) - bt866_write(client, init[i], init[i+1]); - - val = encoder->reg[0xdc]; - - if (route->input == 0) - val |= 0x40; /* CBSWAP */ - else - val &= ~0x40; /* !CBSWAP */ - - bt866_write(client, 0xdc, val); - - val = encoder->reg[0xcc]; - if (route->input == 2) - val |= 0x01; /* OSDBAR */ - else - val &= ~0x01; /* !OSDBAR */ - bt866_write(client, 0xcc, val); - - v4l_dbg(1, debug, client, "set input %d\n", route->input); - - switch (route->input) { - case 0: - break; - case 1: - break; - default: - return -EINVAL; - } +static int bt866_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *route) +{ + static const __u8 init[] = { + 0xc8, 0xcc, /* CRSCALE */ + 0xca, 0x91, /* CBSCALE */ + 0xcc, 0x24, /* YC16 | OSDNUM */ + 0xda, 0x00, /* */ + 0xdc, 0x24, /* SETMODE | PAL */ + 0xde, 0x02, /* EACTIVE */ + + /* overlay colors */ + 0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */ + 0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */ + 0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */ + 0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */ + 0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */ + 0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */ + 0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */ + 0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */ + + 0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */ + 0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */ + 0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */ + 0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */ + 0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */ + 0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */ + 0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */ + 0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */ + }; + struct bt866 *encoder = to_bt866(sd); + u8 val; + int i; + + for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2) + bt866_write(encoder, init[i], init[i+1]); + + val = encoder->reg[0xdc]; + + if (route->input == 0) + val |= 0x40; /* CBSWAP */ + else + val &= ~0x40; /* !CBSWAP */ + + bt866_write(encoder, 0xdc, val); + + val = encoder->reg[0xcc]; + if (route->input == 2) + val |= 0x01; /* OSDBAR */ + else + val &= ~0x01; /* !OSDBAR */ + bt866_write(encoder, 0xcc, val); + + v4l2_dbg(1, debug, sd, "set input %d\n", route->input); + + switch (route->input) { + case 0: + case 1: + case 2: break; + default: + return -EINVAL; } + return 0; +} - case 4711: - { - int *iarg = arg; - __u8 val; +#if 0 +/* Code to setup square pixels, might be of some use in the future, + but is currently unused. */ + val = encoder->reg[0xdc]; + if (*iarg) + val |= 1; /* SQUARE */ + else + val &= ~1; /* !SQUARE */ + bt866_write(client, 0xdc, val); +#endif + +static int bt866_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); - v4l_dbg(1, debug, client, "square %d\n", *iarg); + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_BT866, 0); +} - val = encoder->reg[0xdc]; - if (*iarg) - val |= 1; /* SQUARE */ - else - val &= ~1; /* !SQUARE */ - bt866_write(client, 0xdc, val); - break; - } +static int bt866_command(struct i2c_client *client, unsigned cmd, void *arg) +{ + return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg); +} - default: - return -EINVAL; - } +/* ----------------------------------------------------------------------- */ - return 0; -} +static const struct v4l2_subdev_core_ops bt866_core_ops = { + .g_chip_ident = bt866_g_chip_ident, +}; -static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; +static const struct v4l2_subdev_video_ops bt866_video_ops = { + .s_std_output = bt866_s_std_output, + .s_routing = bt866_s_routing, +}; -I2C_CLIENT_INSMOD; +static const struct v4l2_subdev_ops bt866_ops = { + .core = &bt866_core_ops, + .video = &bt866_video_ops, +}; static int bt866_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct bt866 *encoder; + struct v4l2_subdev *sd; v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); @@ -208,14 +218,17 @@ static int bt866_probe(struct i2c_client *client, encoder = kzalloc(sizeof(*encoder), GFP_KERNEL); if (encoder == NULL) return -ENOMEM; - - i2c_set_clientdata(client, encoder); + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &bt866_ops); return 0; } static int bt866_remove(struct i2c_client *client) { - kfree(i2c_get_clientdata(client)); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_bt866(sd)); return 0; } diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index bbe2bb6a596..cfb236e5a1c 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -71,6 +71,9 @@ enum { V4L2_IDENT_CX23416 = 416, V4L2_IDENT_CX23418 = 418, + /* module bt866: just ident 866 */ + V4L2_IDENT_BT866 = 866, + /* module vp27smpx: just ident 2700 */ V4L2_IDENT_VP27SMPX = 2700, -- 2.41.0