From 85835f442e5bbf9d3b8f6e574751da8db77016d2 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 30 Apr 2006 11:15:58 +0100 Subject: [PATCH] [SERIAL] AMD Alchemy UART: claim memory range I've noticed that the 8250/Au1x00 driver (drivers/serial/8250_au1x00.c) doesn't claim UART memory ranges and uses wrong (KSEG1-based) UART addresses instead of the physical ones. Signed-off-by: Sergei Shtylyov Signed-off-by: Russell King --- drivers/serial/8250.c | 6 ++++++ drivers/serial/8250_au1x00.c | 5 ++--- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 674b15c78f6..d641ac4e976 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1906,6 +1906,9 @@ static int serial8250_request_std_resource(struct uart_8250_port *up) int ret = 0; switch (up->port.iotype) { + case UPIO_AU: + size = 0x100000; + /* fall thru */ case UPIO_MEM: if (!up->port.mapbase) break; @@ -1938,6 +1941,9 @@ static void serial8250_release_std_resource(struct uart_8250_port *up) unsigned int size = 8 << up->port.regshift; switch (up->port.iotype) { + case UPIO_AU: + size = 0x100000; + /* fall thru */ case UPIO_MEM: if (!up->port.mapbase) break; diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c index 3d1bfd07208..58015fd14be 100644 --- a/drivers/serial/8250_au1x00.c +++ b/drivers/serial/8250_au1x00.c @@ -30,13 +30,12 @@ { \ .iobase = _base, \ .membase = (void __iomem *)_base,\ - .mapbase = _base, \ + .mapbase = CPHYSADDR(_base), \ .irq = _irq, \ .uartclk = 0, /* filled */ \ .regshift = 2, \ .iotype = UPIO_AU, \ - .flags = UPF_SKIP_TEST | \ - UPF_IOREMAP, \ + .flags = UPF_SKIP_TEST \ } static struct plat_serial8250_port au1x00_data[] = { -- 2.41.1