From 809b53c4ef7188dc284498ef6e4ec2d4d587a275 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 12 Dec 2007 23:31:58 +0100 Subject: [PATCH] hpt366: fix HPT37x PIO mode timings (take 2) After looking into the HPT370 manual (now that I have it) and re-checking all the timing tables, here's what I have discovered: - at 33 MHz clock, PIO mode 0 timings turned to be overclocked, and all other PIO modes underclocked; - at 50 MHz clock, PIO modes 0 to 2 turned to be overclocked; - at 66 MHz clock, PIO mode 0 was overclocked too. Finally, the taskfile timing (matching PIO mode 0) turned to be overclocked at all clock frequencies (and in all manuals)... The new timings have been tested on HPT370 chip (at 33 MHz PCI clock) and on HPT371N chip (at both 50 and 66 MHz DPLL clock). Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 71 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 70 insertions(+), 1 deletion(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 5682895d36d..9fce25bdec8 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.21 Oct 23, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.22 Dec 4, 2007 * * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -310,6 +310,8 @@ static u32 twenty_five_base_hpt36x[] = { /* XFER_PIO_0 */ 0xc0d08585 }; +#if 0 +/* These are the timing tables from the HighPoint open source drivers... */ static u32 thirty_three_base_hpt37x[] = { /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */ /* XFER_UDMA_5 */ 0x12446231, @@ -369,6 +371,73 @@ static u32 sixty_six_base_hpt37x[] = { /* XFER_PIO_1 */ 0x0d029d26, /* XFER_PIO_0 */ 0x0d029d5e }; +#else +/* + * The following are the new timing tables with PIO mode data/taskfile transfer + * overclocking fixed... + */ + +/* This table is taken from the HPT370 data manual rev. 1.02 */ +static u32 thirty_three_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x16455031, /* 0x16655031 ?? */ + /* XFER_UDMA_5 */ 0x16455031, + /* XFER_UDMA_4 */ 0x16455031, + /* XFER_UDMA_3 */ 0x166d5031, + /* XFER_UDMA_2 */ 0x16495031, + /* XFER_UDMA_1 */ 0x164d5033, + /* XFER_UDMA_0 */ 0x16515097, + + /* XFER_MW_DMA_2 */ 0x26515031, + /* XFER_MW_DMA_1 */ 0x26515033, + /* XFER_MW_DMA_0 */ 0x26515097, + + /* XFER_PIO_4 */ 0x06515021, + /* XFER_PIO_3 */ 0x06515022, + /* XFER_PIO_2 */ 0x06515033, + /* XFER_PIO_1 */ 0x06915065, + /* XFER_PIO_0 */ 0x06d1508a +}; + +static u32 fifty_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x1a861842, + /* XFER_UDMA_5 */ 0x1a861842, + /* XFER_UDMA_4 */ 0x1aae1842, + /* XFER_UDMA_3 */ 0x1a8e1842, + /* XFER_UDMA_2 */ 0x1a0e1842, + /* XFER_UDMA_1 */ 0x1a161854, + /* XFER_UDMA_0 */ 0x1a1a18ea, + + /* XFER_MW_DMA_2 */ 0x2a821842, + /* XFER_MW_DMA_1 */ 0x2a821854, + /* XFER_MW_DMA_0 */ 0x2a8218ea, + + /* XFER_PIO_4 */ 0x0a821842, + /* XFER_PIO_3 */ 0x0a821843, + /* XFER_PIO_2 */ 0x0a821855, + /* XFER_PIO_1 */ 0x0ac218a8, + /* XFER_PIO_0 */ 0x0b02190c +}; + +static u32 sixty_six_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x1c86fe62, + /* XFER_UDMA_5 */ 0x1caefe62, /* 0x1c8afe62 */ + /* XFER_UDMA_4 */ 0x1c8afe62, + /* XFER_UDMA_3 */ 0x1c8efe62, + /* XFER_UDMA_2 */ 0x1c92fe62, + /* XFER_UDMA_1 */ 0x1c9afe62, + /* XFER_UDMA_0 */ 0x1c82fe62, + + /* XFER_MW_DMA_2 */ 0x2c82fe62, + /* XFER_MW_DMA_1 */ 0x2c82fe66, + /* XFER_MW_DMA_0 */ 0x2c82ff2e, + + /* XFER_PIO_4 */ 0x0c82fe62, + /* XFER_PIO_3 */ 0x0c82fe84, + /* XFER_PIO_2 */ 0x0c82fea6, + /* XFER_PIO_1 */ 0x0d02ff26, + /* XFER_PIO_0 */ 0x0d42ff7f +}; +#endif #define HPT366_DEBUG_DRIVE_INFO 0 #define HPT371_ALLOW_ATA133_6 1 -- 2.41.0