From 7293136810936bbde403bcb67ac1b4dbae4dd790 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 11 Sep 2007 22:28:35 +0200 Subject: [PATCH] hpt366: fix PCI clock detection for HPT374 (take 4) HPT374 BIOS seems to only save f_CNT register value for the function #0 before re-tuning DPLL (that causes the driver to report obviously distorted f_CNT for the function #1) -- fix this by always reading the saved f_CNT register value from the function #0 in the driver's init_chipset() method. While at it, introduce 'chip_type' for holding the 'struct hpt_info' field of the same name and replace the structure assignment with memcpy()... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 44 ++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 13 deletions(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 2cd74c345a6..f87eec97057 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.10 Jun 29, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.11 Aug 11, 2007 * * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -68,7 +68,8 @@ * HPT37x chip family; save space by introducing the separate transfer mode * table in which the mode lookup is done * - use f_CNT value saved by the HighPoint BIOS as reading it directly gives - * the wrong PCI frequency since DPLL has already been calibrated by BIOS + * the wrong PCI frequency since DPLL has already been calibrated by BIOS; + * read it only from the function 0 of HPT374 chips * - fix the hotswap code: it caused RESET- to glitch when tristating the bus, * and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead * - pass to init_chipset() handlers a copy of the IDE PCI device structure as @@ -981,6 +982,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha struct hpt_info *info = kmalloc(sizeof(struct hpt_info), GFP_KERNEL); unsigned long io_base = pci_resource_start(dev, 4); u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */ + u8 chip_type; enum ata_clock clock; if (info == NULL) { @@ -992,7 +994,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * Copy everything from a static "template" structure * to just allocated per-chip hpt_info structure. */ - *info = *(struct hpt_info *)pci_get_drvdata(dev); + memcpy(info, pci_get_drvdata(dev), sizeof(struct hpt_info)); + chip_type = info->chip_type; pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); @@ -1002,7 +1005,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha /* * First, try to estimate the PCI clock frequency... */ - if (info->chip_type >= HPT370) { + if (chip_type >= HPT370) { u8 scr1 = 0; u16 f_cnt = 0; u32 temp = 0; @@ -1016,7 +1019,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * HighPoint does this for HPT372A. * NOTE: This register is only writeable via I/O space. */ - if (info->chip_type == HPT372A) + if (chip_type == HPT372A) outb(0x0e, io_base + 0x9c); /* @@ -1034,13 +1037,28 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * First try reading the register in which the HighPoint BIOS * saves f_CNT value before reprogramming the DPLL from its * default setting (which differs for the various chips). - * NOTE: This register is only accessible via I/O space. * - * In case the signature check fails, we'll have to resort to - * reading the f_CNT register itself in hopes that nobody has - * touched the DPLL yet... + * NOTE: This register is only accessible via I/O space; + * HPT374 BIOS only saves it for the function 0, so we have to + * always read it from there -- no need to check the result of + * pci_get_slot() for the function 0 as the whole device has + * been already "pinned" (via function 1) in init_setup_hpt374() + */ + if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) { + struct pci_dev *dev1 = pci_get_slot(dev->bus, + dev->devfn - 1); + unsigned long io_base = pci_resource_start(dev1, 4); + + temp = inl(io_base + 0x90); + pci_dev_put(dev1); + } else + temp = inl(io_base + 0x90); + + /* + * In case the signature check fails, we'll have to + * resort to reading the f_CNT register itself in hopes + * that nobody has touched the DPLL yet... */ - temp = inl(io_base + 0x90); if ((temp & 0xFFFFF000) != 0xABCDE000) { int i; @@ -1120,7 +1138,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * We also don't like using the DPLL because this causes glitches * on PRST-/SRST- when the state engine gets reset... */ - if (info->chip_type >= HPT374 || info->settings[clock] == NULL) { + if (chip_type >= HPT374 || info->settings[clock] == NULL) { u16 f_low, delta = pci_clk < 50 ? 2 : 4; int adjust; @@ -1190,7 +1208,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha /* Point to this chip's own instance of the hpt_info structure. */ pci_set_drvdata(dev, info); - if (info->chip_type >= HPT370) { + if (chip_type >= HPT370) { u8 mcr1, mcr4; /* @@ -1209,7 +1227,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * the MISC. register to stretch the UltraDMA Tss timing. * NOTE: This register is only writeable via I/O space. */ - if (info->chip_type == HPT371N && clock == ATA_CLOCK_66MHZ) + if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ) outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c); -- 2.41.0