From 40a0017eb89c4c5a4bf81523edd867d730c9f143 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 4 Dec 2006 12:26:36 +0200 Subject: [PATCH] [PATCH] pcmcia: at91_cf update This is an update to the AT91 CompactFlash driver. We replace the hard-coded "chip select 4" with the chip-select value passed via platform_data. The configuration of the EBI memory controller to enable Compact Flash access is now also handled in the platform setup code and not in the driver. Signed-off-by: Andrew Victor Signed-off-by: Dominik Brodowski --- drivers/pcmcia/at91_cf.c | 35 +++-------------------------------- 1 file changed, 3 insertions(+), 32 deletions(-) diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index a8fa6c17fcf..b6746301d9a 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -157,9 +157,8 @@ static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io) /* * Use 16 bit accesses unless/until we need 8-bit i/o space. - * Always set CSR4 ... PCMCIA won't always unmap things. */ - csr = at91_sys_read(AT91_SMC_CSR(4)) & ~AT91_SMC_DBW; + csr = at91_sys_read(AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW; /* * NOTE: this CF controller ignores IOIS16, so we can't really do @@ -178,7 +177,7 @@ static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io) csr |= AT91_SMC_DBW_16; pr_debug("%s: 16bit i/o bus\n", driver_name); } - at91_sys_write(AT91_SMC_CSR(4), csr); + at91_sys_write(AT91_SMC_CSR(cf->board->chipselect), csr); io->start = cf->socket.io_offset; io->stop = io->start + SZ_2K - 1; @@ -222,7 +221,6 @@ static int __init at91_cf_probe(struct platform_device *pdev) struct at91_cf_socket *cf; struct at91_cf_data *board = pdev->dev.platform_data; struct resource *io; - unsigned int csa; int status; if (!board || !board->det_pin || !board->rst_pin) @@ -241,28 +239,6 @@ static int __init at91_cf_probe(struct platform_device *pdev) cf->phys_baseaddr = io->start; platform_set_drvdata(pdev, cf); - /* CF takes over CS4, CS5, CS6 */ - csa = at91_sys_read(AT91_EBI_CSA); - at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH); - - /* nWAIT is _not_ a default setting */ - (void) at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */ - - /* - * Static memory controller timing adjustments. - * REVISIT: these timings are in terms of MCK cycles, so - * when MCK changes (cpufreq etc) so must these values... - */ - at91_sys_write(AT91_SMC_CSR(4), - AT91_SMC_ACSS_STD - | AT91_SMC_DBW_16 - | AT91_SMC_BAT - | AT91_SMC_WSEN - | AT91_SMC_NWS_(32) /* wait states */ - | AT91_SMC_RWSETUP_(6) /* setup time */ - | AT91_SMC_RWHOLD_(4) /* hold time */ - ); - /* must be a GPIO; ergo must trigger on both edges */ status = request_irq(board->det_pin, at91_cf_irq, 0, driver_name, cf); if (status < 0) @@ -291,7 +267,7 @@ static int __init at91_cf_probe(struct platform_device *pdev) goto fail1; } - /* reserve CS4, CS5, and CS6 regions; but use just CS4 */ + /* reserve chip-select regions */ if (!request_mem_region(io->start, io->end + 1 - io->start, driver_name)) { status = -ENXIO; @@ -327,7 +303,6 @@ fail0a: device_init_wakeup(&pdev->dev, 0); free_irq(board->det_pin, cf); fail0: - at91_sys_write(AT91_EBI_CSA, csa); kfree(cf); return status; } @@ -337,7 +312,6 @@ static int __exit at91_cf_remove(struct platform_device *pdev) struct at91_cf_socket *cf = platform_get_drvdata(pdev); struct at91_cf_data *board = cf->board; struct resource *io = cf->socket.io[0].res; - unsigned int csa; pcmcia_unregister_socket(&cf->socket); if (board->irq_pin) @@ -347,9 +321,6 @@ static int __exit at91_cf_remove(struct platform_device *pdev) iounmap((void __iomem *) cf->socket.io_offset); release_mem_region(io->start, io->end + 1 - io->start); - csa = at91_sys_read(AT91_EBI_CSA); - at91_sys_write(AT91_EBI_CSA, csa & ~AT91_EBI_CS4A); - kfree(cf); return 0; } -- 2.41.1