From 314cdbefd1fd0a7acf3780e9628465b77ea6a836 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 30 Jan 2008 13:31:21 +0100 Subject: [PATCH] x86: FIFO ticket spinlocks Introduce ticket lock spinlocks for x86 which are FIFO. The implementation is described in the comments. The straight-line lock/unlock instruction sequence is slightly slower than the dec based locks on modern x86 CPUs, however the difference is quite small on Core2 and Opteron when working out of cache, and becomes almost insignificant even on P4 when the lock misses cache. trylock is more significantly slower, but they are relatively rare. On an 8 core (2 socket) Opteron, spinlock unfairness is extremely noticable, with a userspace test having a difference of up to 2x runtime per thread, and some threads are starved or "unfairly" granted the lock up to 1 000 000 (!) times. After this patch, all threads appear to finish at exactly the same time. The memory ordering of the lock does conform to x86 standards, and the implementation has been reviewed by Intel and AMD engineers. The algorithm also tells us how many CPUs are contending the lock, so lockbreak becomes trivial and we no longer have to waste 4 bytes per spinlock for it. After this, we can no longer spin on any locks with preempt enabled and cannot reenable interrupts when spinning on an irq safe lock, because at that point we have already taken a ticket and the would deadlock if the same CPU tries to take the lock again. These are questionable anyway: if the lock happens to be called under a preempt or interrupt disabled section, then it will just have the same latency problems. The real fix is to keep critical sections short, and ensure locks are reasonably fair (which this patch does). Signed-off-by: Nick Piggin Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 3 +- include/asm-x86/paravirt.h | 21 ----- include/asm-x86/spinlock.h | 153 ++++++++++++++++--------------- include/asm-x86/spinlock_types.h | 2 +- 4 files changed, 83 insertions(+), 96 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index db434f8171d..1992b8fe6a2 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -20,8 +20,7 @@ config X86 def_bool y config GENERIC_LOCKBREAK - def_bool y - depends on SMP && PREEMPT + def_bool n config GENERIC_TIME def_bool y diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h index 4f23f434a1f..24406703007 100644 --- a/include/asm-x86/paravirt.h +++ b/include/asm-x86/paravirt.h @@ -1077,27 +1077,6 @@ static inline unsigned long __raw_local_irq_save(void) return f; } -#define CLI_STRING \ - _paravirt_alt("pushl %%ecx; pushl %%edx;" \ - "call *%[paravirt_cli_opptr];" \ - "popl %%edx; popl %%ecx", \ - "%c[paravirt_cli_type]", "%c[paravirt_clobber]") - -#define STI_STRING \ - _paravirt_alt("pushl %%ecx; pushl %%edx;" \ - "call *%[paravirt_sti_opptr];" \ - "popl %%edx; popl %%ecx", \ - "%c[paravirt_sti_type]", "%c[paravirt_clobber]") - -#define CLI_STI_CLOBBERS , "%eax" -#define CLI_STI_INPUT_ARGS \ - , \ - [paravirt_cli_type] "i" (PARAVIRT_PATCH(pv_irq_ops.irq_disable)), \ - [paravirt_cli_opptr] "m" (pv_irq_ops.irq_disable), \ - [paravirt_sti_type] "i" (PARAVIRT_PATCH(pv_irq_ops.irq_enable)), \ - [paravirt_sti_opptr] "m" (pv_irq_ops.irq_enable), \ - paravirt_clobber(CLBR_EAX) - /* Make sure as little as possible of this mess escapes. */ #undef PARAVIRT_CALL #undef __PVOP_CALL diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h index afd4b80ff0a..97d52b506af 100644 --- a/include/asm-x86/spinlock.h +++ b/include/asm-x86/spinlock.h @@ -5,6 +5,7 @@ #include #include #include +#include /* * Your basic SMP spinlocks, allowing only a single CPU anywhere @@ -12,7 +13,8 @@ * Simple spin lock operations. There are two variants, one clears IRQ's * on the local processor, one does not. * - * We make no fairness assumptions. They have a cost. + * These are fair FIFO ticket locks, which are currently limited to 256 + * CPUs. * * (the type definitions are in asm/spinlock_types.h) */ @@ -42,103 +44,102 @@ typedef int _slock_t; # define LOCK_PTR_REG "D" #endif +#if (NR_CPUS > 256) +#error spinlock supports a maximum of 256 CPUs +#endif + static inline int __raw_spin_is_locked(raw_spinlock_t *lock) { - return *(volatile _slock_t *)(&(lock)->slock) <= 0; + int tmp = *(volatile signed int *)(&(lock)->slock); + + return (((tmp >> 8) & 0xff) != (tmp & 0xff)); } -static inline void __raw_spin_lock(raw_spinlock_t *lock) +static inline int __raw_spin_is_contended(raw_spinlock_t *lock) { - asm volatile( - "\n1:\t" - LOCK_PREFIX " ; " LOCK_INS_DEC " %0\n\t" - "jns 3f\n" - "2:\t" - "rep;nop\n\t" - LOCK_INS_CMP " $0,%0\n\t" - "jle 2b\n\t" - "jmp 1b\n" - "3:\n\t" - : "+m" (lock->slock) : : "memory"); + int tmp = *(volatile signed int *)(&(lock)->slock); + + return (((tmp >> 8) & 0xff) - (tmp & 0xff)) > 1; } -/* - * It is easier for the lock validator if interrupts are not re-enabled - * in the middle of a lock-acquire. This is a performance feature anyway - * so we turn it off: - * - * NOTE: there's an irqs-on section here, which normally would have to be - * irq-traced, but on CONFIG_TRACE_IRQFLAGS we never use this variant. - */ -#ifndef CONFIG_PROVE_LOCKING -static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, - unsigned long flags) +static inline void __raw_spin_lock(raw_spinlock_t *lock) { - asm volatile( - "\n1:\t" - LOCK_PREFIX " ; " LOCK_INS_DEC " %[slock]\n\t" - "jns 5f\n" - "testl $0x200, %[flags]\n\t" - "jz 4f\n\t" - STI_STRING "\n" - "3:\t" - "rep;nop\n\t" - LOCK_INS_CMP " $0, %[slock]\n\t" - "jle 3b\n\t" - CLI_STRING "\n\t" + short inc = 0x0100; + + /* + * Ticket locks are conceptually two bytes, one indicating the current + * head of the queue, and the other indicating the current tail. The + * lock is acquired by atomically noting the tail and incrementing it + * by one (thus adding ourself to the queue and noting our position), + * then waiting until the head becomes equal to the the initial value + * of the tail. + * + * This uses a 16-bit xadd to increment the tail and also load the + * position of the head, which takes care of memory ordering issues + * and should be optimal for the uncontended case. Note the tail must + * be in the high byte, otherwise the 16-bit wide increment of the low + * byte would carry up and contaminate the high byte. + */ + + __asm__ __volatile__ ( + LOCK_PREFIX "xaddw %w0, %1\n" + "1:\t" + "cmpb %h0, %b0\n\t" + "je 2f\n\t" + "rep ; nop\n\t" + "movb %1, %b0\n\t" + /* don't need lfence here, because loads are in-order */ "jmp 1b\n" - "4:\t" - "rep;nop\n\t" - LOCK_INS_CMP " $0, %[slock]\n\t" - "jg 1b\n\t" - "jmp 4b\n" - "5:\n\t" - : [slock] "+m" (lock->slock) - : [flags] "r" ((u32)flags) - CLI_STI_INPUT_ARGS - : "memory" CLI_STI_CLOBBERS); + "2:" + :"+Q" (inc), "+m" (lock->slock) + : + :"memory", "cc"); } -#endif + +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) static inline int __raw_spin_trylock(raw_spinlock_t *lock) { - _slock_t oldval; + int tmp; + short new; asm volatile( - LOCK_INS_XCH " %0,%1" - :"=q" (oldval), "+m" (lock->slock) - :"0" (0) : "memory"); - - return oldval > 0; + "movw %2,%w0\n\t" + "cmpb %h0,%b0\n\t" + "jne 1f\n\t" + "movw %w0,%w1\n\t" + "incb %h1\n\t" + "lock ; cmpxchgw %w1,%2\n\t" + "1:" + "sete %b1\n\t" + "movzbl %b1,%0\n\t" + :"=&a" (tmp), "=Q" (new), "+m" (lock->slock) + : + : "memory", "cc"); + + return tmp; } +#if defined(CONFIG_X86_32) && \ + (defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)) /* - * __raw_spin_unlock based on writing $1 to the low byte. - * This method works. Despite all the confusion. - * (except on PPro SMP or if we are using OOSTORE, so we use xchgb there) + * On PPro SMP or if we are using OOSTORE, we use a locked operation to unlock * (PPro errata 66, 92) */ -#if defined(X86_64) || \ - (!defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE)) - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - asm volatile(LOCK_INS_MOV " $1,%0" : "=m" (lock->slock) :: "memory"); -} - +# define UNLOCK_LOCK_PREFIX LOCK_PREFIX #else +# define UNLOCK_LOCK_PREFIX +#endif static inline void __raw_spin_unlock(raw_spinlock_t *lock) { - unsigned char oldval = 1; - - asm volatile("xchgb %b0, %1" - : "=q" (oldval), "+m" (lock->slock) - : "0" (oldval) : "memory"); + __asm__ __volatile__( + UNLOCK_LOCK_PREFIX "incb %0" + :"+m" (lock->slock) + : + :"memory", "cc"); } -#endif - static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) { while (__raw_spin_is_locked(lock)) @@ -159,11 +160,19 @@ static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) * with the high bit (sign) being the "contended" bit. */ +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ static inline int __raw_read_can_lock(raw_rwlock_t *lock) { return (int)(lock)->lock > 0; } +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ static inline int __raw_write_can_lock(raw_rwlock_t *lock) { return (lock)->lock == RW_LOCK_BIAS; diff --git a/include/asm-x86/spinlock_types.h b/include/asm-x86/spinlock_types.h index 4da9345c150..9029cf78cf5 100644 --- a/include/asm-x86/spinlock_types.h +++ b/include/asm-x86/spinlock_types.h @@ -9,7 +9,7 @@ typedef struct { unsigned int slock; } raw_spinlock_t; -#define __RAW_SPIN_LOCK_UNLOCKED { 1 } +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } typedef struct { unsigned int lock; -- 2.41.0