From 2ce411b57ec45a97bf0a0af4afe65b9ed5ad5159 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 19 Nov 2008 15:26:21 -0800 Subject: [PATCH] Staging: comedi: me_daq: fix checkpatch.pl issues This fixes a number of checkpatch.pl issues in the me_daq driver. Cc: Michael Hillmann Cc: David Schleef Cc: Frank Mori Hess Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/me_daq.c | 609 ++++++++++++------------ 1 file changed, 298 insertions(+), 311 deletions(-) diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c index e741ec54527..c784ea99950 100644 --- a/drivers/staging/comedi/drivers/me_daq.c +++ b/drivers/staging/comedi/drivers/me_daq.c @@ -54,114 +54,111 @@ from http://www.comedi.org #include "comedi_pci.h" -//#include "me2600_fw.h" - -#define ME_DRIVER_NAME "me_daq" - -#define ME2000_DEVICE_ID 0x2000 -#define ME2600_DEVICE_ID 0x2600 - -#define PLX_INTCSR 0x4C // PLX interrupt status register -#define XILINX_DOWNLOAD_RESET 0x42 // Xilinx registers - -#define ME_CONTROL_1 0x0000 // - | W -#define INTERRUPT_ENABLE (1<<15) -#define COUNTER_B_IRQ (1<<12) -#define COUNTER_A_IRQ (1<<11) -#define CHANLIST_READY_IRQ (1<<10) -#define EXT_IRQ (1<<9) -#define ADFIFO_HALFFULL_IRQ (1<<8) -#define SCAN_COUNT_ENABLE (1<<5) -#define SIMULTANEOUS_ENABLE (1<<4) -#define TRIGGER_FALLING_EDGE (1<<3) -#define CONTINUOUS_MODE (1<<2) -#define DISABLE_ADC (0<<0) -#define SOFTWARE_TRIGGERED_ADC (1<<0) -#define SCAN_TRIGGERED_ADC (2<<0) -#define EXT_TRIGGERED_ADC (3<<0) -#define ME_ADC_START 0x0000 // R | - -#define ME_CONTROL_2 0x0002 // - | W -#define ENABLE_ADFIFO (1<<10) -#define ENABLE_CHANLIST (1<<9) -#define ENABLE_PORT_B (1<<7) -#define ENABLE_PORT_A (1<<6) -#define ENABLE_COUNTER_B (1<<4) -#define ENABLE_COUNTER_A (1<<3) -#define ENABLE_DAC (1<<1) -#define BUFFERED_DAC (1<<0) -#define ME_DAC_UPDATE 0x0002 // R | - -#define ME_STATUS 0x0004 // R | - -#define COUNTER_B_IRQ_PENDING (1<<12) -#define COUNTER_A_IRQ_PENDING (1<<11) -#define CHANLIST_READY_IRQ_PENDING (1<<10) -#define EXT_IRQ_PENDING (1<<9) -#define ADFIFO_HALFFULL_IRQ_PENDING (1<<8) -#define ADFIFO_FULL (1<<4) -#define ADFIFO_HALFFULL (1<<3) -#define ADFIFO_EMPTY (1<<2) -#define CHANLIST_FULL (1<<1) -#define FST_ACTIVE (1<<0) -#define ME_RESET_INTERRUPT 0x0004 // - | W -#define ME_DIO_PORT_A 0x0006 // R | W -#define ME_DIO_PORT_B 0x0008 // R | W -#define ME_TIMER_DATA_0 0x000A // - | W -#define ME_TIMER_DATA_1 0x000C // - | W -#define ME_TIMER_DATA_2 0x000E // - | W -#define ME_CHANNEL_LIST 0x0010 // - | W -#define ADC_UNIPOLAR (1<<6) -#define ADC_GAIN_0 (0<<4) -#define ADC_GAIN_1 (1<<4) -#define ADC_GAIN_2 (2<<4) -#define ADC_GAIN_3 (3<<4) -#define ME_READ_AD_FIFO 0x0010 // R | - -#define ME_DAC_CONTROL 0x0012 // - | W -#define DAC_UNIPOLAR_D (0<<4) -#define DAC_BIPOLAR_D (1<<4) -#define DAC_UNIPOLAR_C (0<<5) -#define DAC_BIPOLAR_C (1<<5) -#define DAC_UNIPOLAR_B (0<<6) -#define DAC_BIPOLAR_B (1<<6) -#define DAC_UNIPOLAR_A (0<<7) -#define DAC_BIPOLAR_A (1<<7) -#define DAC_GAIN_0_D (0<<8) -#define DAC_GAIN_1_D (1<<8) -#define DAC_GAIN_0_C (0<<9) -#define DAC_GAIN_1_C (1<<9) -#define DAC_GAIN_0_B (0<<10) -#define DAC_GAIN_1_B (1<<10) -#define DAC_GAIN_0_A (0<<11) -#define DAC_GAIN_1_A (1<<11) -#define ME_DAC_CONTROL_UPDATE 0x0012 // R | - -#define ME_DAC_DATA_A 0x0014 // - | W -#define ME_DAC_DATA_B 0x0016 // - | W -#define ME_DAC_DATA_C 0x0018 // - | W -#define ME_DAC_DATA_D 0x001A // - | W -#define ME_COUNTER_ENDDATA_A 0x001C // - | W -#define ME_COUNTER_ENDDATA_B 0x001E // - | W -#define ME_COUNTER_STARTDATA_A 0x0020 // - | W -#define ME_COUNTER_VALUE_A 0x0020 // R | - -#define ME_COUNTER_STARTDATA_B 0x0022 // - | W -#define ME_COUNTER_VALUE_B 0x0022 // R | - - -// -// Function prototypes -// - -static int me_attach(comedi_device * dev, comedi_devconfig * it); -static int me_detach(comedi_device * dev); +/*#include "me2600_fw.h" */ + +#define ME_DRIVER_NAME "me_daq" + +#define ME2000_DEVICE_ID 0x2000 +#define ME2600_DEVICE_ID 0x2600 + +#define PLX_INTCSR 0x4C /* PLX interrupt status register */ +#define XILINX_DOWNLOAD_RESET 0x42 /* Xilinx registers */ + +#define ME_CONTROL_1 0x0000 /* - | W */ +#define INTERRUPT_ENABLE (1<<15) +#define COUNTER_B_IRQ (1<<12) +#define COUNTER_A_IRQ (1<<11) +#define CHANLIST_READY_IRQ (1<<10) +#define EXT_IRQ (1<<9) +#define ADFIFO_HALFFULL_IRQ (1<<8) +#define SCAN_COUNT_ENABLE (1<<5) +#define SIMULTANEOUS_ENABLE (1<<4) +#define TRIGGER_FALLING_EDGE (1<<3) +#define CONTINUOUS_MODE (1<<2) +#define DISABLE_ADC (0<<0) +#define SOFTWARE_TRIGGERED_ADC (1<<0) +#define SCAN_TRIGGERED_ADC (2<<0) +#define EXT_TRIGGERED_ADC (3<<0) +#define ME_ADC_START 0x0000 /* R | - */ +#define ME_CONTROL_2 0x0002 /* - | W */ +#define ENABLE_ADFIFO (1<<10) +#define ENABLE_CHANLIST (1<<9) +#define ENABLE_PORT_B (1<<7) +#define ENABLE_PORT_A (1<<6) +#define ENABLE_COUNTER_B (1<<4) +#define ENABLE_COUNTER_A (1<<3) +#define ENABLE_DAC (1<<1) +#define BUFFERED_DAC (1<<0) +#define ME_DAC_UPDATE 0x0002 /* R | - */ +#define ME_STATUS 0x0004 /* R | - */ +#define COUNTER_B_IRQ_PENDING (1<<12) +#define COUNTER_A_IRQ_PENDING (1<<11) +#define CHANLIST_READY_IRQ_PENDING (1<<10) +#define EXT_IRQ_PENDING (1<<9) +#define ADFIFO_HALFFULL_IRQ_PENDING (1<<8) +#define ADFIFO_FULL (1<<4) +#define ADFIFO_HALFFULL (1<<3) +#define ADFIFO_EMPTY (1<<2) +#define CHANLIST_FULL (1<<1) +#define FST_ACTIVE (1<<0) +#define ME_RESET_INTERRUPT 0x0004 /* - | W */ +#define ME_DIO_PORT_A 0x0006 /* R | W */ +#define ME_DIO_PORT_B 0x0008 /* R | W */ +#define ME_TIMER_DATA_0 0x000A /* - | W */ +#define ME_TIMER_DATA_1 0x000C /* - | W */ +#define ME_TIMER_DATA_2 0x000E /* - | W */ +#define ME_CHANNEL_LIST 0x0010 /* - | W */ +#define ADC_UNIPOLAR (1<<6) +#define ADC_GAIN_0 (0<<4) +#define ADC_GAIN_1 (1<<4) +#define ADC_GAIN_2 (2<<4) +#define ADC_GAIN_3 (3<<4) +#define ME_READ_AD_FIFO 0x0010 /* R | - */ +#define ME_DAC_CONTROL 0x0012 /* - | W */ +#define DAC_UNIPOLAR_D (0<<4) +#define DAC_BIPOLAR_D (1<<4) +#define DAC_UNIPOLAR_C (0<<5) +#define DAC_BIPOLAR_C (1<<5) +#define DAC_UNIPOLAR_B (0<<6) +#define DAC_BIPOLAR_B (1<<6) +#define DAC_UNIPOLAR_A (0<<7) +#define DAC_BIPOLAR_A (1<<7) +#define DAC_GAIN_0_D (0<<8) +#define DAC_GAIN_1_D (1<<8) +#define DAC_GAIN_0_C (0<<9) +#define DAC_GAIN_1_C (1<<9) +#define DAC_GAIN_0_B (0<<10) +#define DAC_GAIN_1_B (1<<10) +#define DAC_GAIN_0_A (0<<11) +#define DAC_GAIN_1_A (1<<11) +#define ME_DAC_CONTROL_UPDATE 0x0012 /* R | - */ +#define ME_DAC_DATA_A 0x0014 /* - | W */ +#define ME_DAC_DATA_B 0x0016 /* - | W */ +#define ME_DAC_DATA_C 0x0018 /* - | W */ +#define ME_DAC_DATA_D 0x001A /* - | W */ +#define ME_COUNTER_ENDDATA_A 0x001C /* - | W */ +#define ME_COUNTER_ENDDATA_B 0x001E /* - | W */ +#define ME_COUNTER_STARTDATA_A 0x0020 /* - | W */ +#define ME_COUNTER_VALUE_A 0x0020 /* R | - */ +#define ME_COUNTER_STARTDATA_B 0x0022 /* - | W */ +#define ME_COUNTER_VALUE_B 0x0022 /* R | - */ + +/* Function prototypes */ +static int me_attach(comedi_device *dev, comedi_devconfig *it); +static int me_detach(comedi_device *dev); static const comedi_lrange me2000_ai_range = { 8, { - BIP_RANGE(10), - BIP_RANGE(5), - BIP_RANGE(2.5), - BIP_RANGE(1.25), - UNI_RANGE(10), - UNI_RANGE(5), - UNI_RANGE(2.5), - UNI_RANGE(1.25) - } + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } }; static const comedi_lrange me2600_ai_range = { @@ -197,106 +194,105 @@ static DEFINE_PCI_DEVICE_TABLE(me_pci_table) = { MODULE_DEVICE_TABLE(pci, me_pci_table); -// -// Board specification structure -// - +/* Board specification structure */ typedef struct { - const char *name; // driver name + const char *name; /* driver name */ int device_id; - int ao_channel_nbr; // DA config + int ao_channel_nbr; /* DA config */ int ao_resolution; int ao_resolution_mask; const comedi_lrange *ao_range_list; - int ai_channel_nbr; // AD config + int ai_channel_nbr; /* AD config */ int ai_resolution; int ai_resolution_mask; const comedi_lrange *ai_range_list; - int dio_channel_nbr; // DIO config + int dio_channel_nbr; /* DIO config */ } me_board_struct; static const me_board_struct me_boards[] = { - { // -- ME-2600i -- - name: ME_DRIVER_NAME, - device_id:ME2600_DEVICE_ID, - ao_channel_nbr:4,// Analog Output - ao_resolution:12, - ao_resolution_mask:0x0fff, - ao_range_list:&me2600_ao_range, - ai_channel_nbr:16, - // Analog Input - ai_resolution:12, - ai_resolution_mask:0x0fff, - ai_range_list:&me2600_ai_range, - dio_channel_nbr:32, + { + /* -- ME-2600i -- */ + .name = ME_DRIVER_NAME, + .device_id = ME2600_DEVICE_ID, + /* Analog Output */ + .ao_channel_nbr = 4, + .ao_resolution = 12, + .ao_resolution_mask = 0x0fff, + .ao_range_list = &me2600_ao_range, + .ai_channel_nbr = 16, + /* Analog Input */ + .ai_resolution = 12, + .ai_resolution_mask = 0x0fff, + .ai_range_list = &me2600_ai_range, + .dio_channel_nbr = 32, }, - { // -- ME-2000i -- - name: ME_DRIVER_NAME, - device_id:ME2000_DEVICE_ID, - ao_channel_nbr:0,// Analog Output - ao_resolution:0, - ao_resolution_mask:0, - ao_range_list:0, - ai_channel_nbr:16, - // Analog Input - ai_resolution:12, - ai_resolution_mask:0x0fff, - ai_range_list:&me2000_ai_range, - dio_channel_nbr:32, + { + /* -- ME-2000i -- */ + .name = ME_DRIVER_NAME, + .device_id = ME2000_DEVICE_ID, + /* Analog Output */ + .ao_channel_nbr = 0, + .ao_resolution = 0, + .ao_resolution_mask = 0, + .ao_range_list = 0, + .ai_channel_nbr = 16, + /* Analog Input */ + .ai_resolution = 12, + .ai_resolution_mask = 0x0fff, + .ai_range_list = &me2000_ai_range, + .dio_channel_nbr = 32, } }; #define me_board_nbr (sizeof(me_boards)/sizeof(me_board_struct)) static comedi_driver me_driver = { - driver_name:ME_DRIVER_NAME, - module:THIS_MODULE, - attach:me_attach, - detach:me_detach, + .driver_name = ME_DRIVER_NAME, + .module = THIS_MODULE, + .attach = me_attach, + .detach = me_detach, }; - COMEDI_PCI_INITCLEANUP(me_driver, me_pci_table); -// -// Private data structure -// - +/* Private data structure */ typedef struct { struct pci_dev *pci_device; - void *plx_regbase; // PLX configuration base address - void *me_regbase; // Base address of the Meilhaus card - unsigned long plx_regbase_size; // Size of PLX configuration space - unsigned long me_regbase_size; // Size of Meilhaus space + void *plx_regbase; /* PLX configuration base address */ + void *me_regbase; /* Base address of the Meilhaus card */ + unsigned long plx_regbase_size; /* Size of PLX configuration space */ + unsigned long me_regbase_size; /* Size of Meilhaus space */ - unsigned short control_1; // Mirror of CONTROL_1 register - unsigned short control_2; // Mirror of CONTROL_2 register - unsigned short dac_control; // Mirror of the DAC_CONTROL register - int ao_readback[4]; // Mirror of analog output data + unsigned short control_1; /* Mirror of CONTROL_1 register */ + unsigned short control_2; /* Mirror of CONTROL_2 register */ + unsigned short dac_control; /* Mirror of the DAC_CONTROL register */ + int ao_readback[4]; /* Mirror of analog output data */ } me_private_data_struct; #define dev_private ((me_private_data_struct *)dev->private) -// ------------------------------------------------------------------ -// -// Helpful functions -// -// ------------------------------------------------------------------ - -static __inline__ void sleep(unsigned sec) +/* + * ------------------------------------------------------------------ + * + * Helpful functions + * + * ------------------------------------------------------------------ + */ +static inline void sleep(unsigned sec) { current->state = TASK_INTERRUPTIBLE; schedule_timeout(sec * HZ); } -// ------------------------------------------------------------------ -// -// DIGITAL INPUT/OUTPUT SECTION -// -// ------------------------------------------------------------------ - -static int me_dio_insn_config(comedi_device * dev, - comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +/* + * ------------------------------------------------------------------ + * + * DIGITAL INPUT/OUTPUT SECTION + * + * ------------------------------------------------------------------ + */ +static int me_dio_insn_config(comedi_device *dev, comedi_subdevice *s, + comedi_insn *insn, lsampl_t *data) { int bits; int mask = 1 << CR_CHAN(insn->chanspec); @@ -319,22 +315,20 @@ static int me_dio_insn_config(comedi_device * dev, dev_private->me_regbase + ME_CONTROL_2); } - if (data[0]) { /* Config port as output */ + if (data[0]) { + /* Config port as output */ s->io_bits |= bits; - } else { /* Config port as input */ - + } else { + /* Config port as input */ s->io_bits &= ~bits; } return 1; } -// -// Digital instant input/outputs -// - -static int me_dio_insn_bits(comedi_device * dev, - comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +/* Digital instant input/outputs */ +static int me_dio_insn_bits(comedi_device *dev, comedi_subdevice *s, + comedi_insn *insn, lsampl_t *data) { unsigned int mask = data[0]; s->state &= ~mask; @@ -360,17 +354,17 @@ static int me_dio_insn_bits(comedi_device * dev, return 2; } -// ------------------------------------------------------------------ -// -// ANALOG INPUT SECTION -// -// ------------------------------------------------------------------ - -// -// Analog instant input -// -static int me_ai_insn_read(comedi_device * dev, - comedi_subdevice * subdevice, comedi_insn * insn, lsampl_t * data) +/* + * ------------------------------------------------------------------ + * + * ANALOG INPUT SECTION + * + * ------------------------------------------------------------------ + */ + +/* Analog instant input */ +static int me_ai_insn_read(comedi_device *dev, comedi_subdevice *subdevice, + comedi_insn *insn, lsampl_t *data) { unsigned short value; int chan = CR_CHAN((&insn->chanspec)[0]); @@ -394,10 +388,14 @@ static int me_ai_insn_read(comedi_device * dev, writew(dev_private->control_2, dev_private->me_regbase + ME_CONTROL_2); /* write to channel list fifo */ - value = chan & 0x0f; // b3:b0 are the channel number - value |= (rang & 0x03) << 4; // b5:b4 are the channel gain - value |= (rang & 0x04) << 4; // b6 channel polarity - value |= ((aref & AREF_DIFF) ? 0x80 : 0); // b7 single or differential + /* b3:b0 are the channel number */ + value = chan & 0x0f; + /* b5:b4 are the channel gain */ + value |= (rang & 0x03) << 4; + /* b6 channel polarity */ + value |= (rang & 0x04) << 4; + /* b7 single or differential */ + value |= ((aref & AREF_DIFF) ? 0x80 : 0); writew(value & 0xff, dev_private->me_regbase + ME_CHANNEL_LIST); /* set ADC mode to software trigger */ @@ -408,11 +406,9 @@ static int me_ai_insn_read(comedi_device * dev, readw(dev_private->me_regbase + ME_ADC_START); /* wait for ADC fifo not empty flag */ - for (i = 100000; i > 0; i--) { - if (!(readw(dev_private->me_regbase + ME_STATUS) & 0x0004)) { + for (i = 100000; i > 0; i--) + if (!(readw(dev_private->me_regbase + ME_STATUS) & 0x0004)) break; - } - } /* get value from ADC fifo */ if (i) { @@ -420,7 +416,8 @@ static int me_ai_insn_read(comedi_device * dev, (readw(dev_private->me_regbase + ME_READ_AD_FIFO) ^ 0x800) & 0x0FFF; } else { - printk("comedi%d: Cannot get single value\n", dev->minor); + printk(KERN_ERR "comedi%d: Cannot get single value\n", + dev->minor); return -EIO; } @@ -431,16 +428,16 @@ static int me_ai_insn_read(comedi_device * dev, return 1; } -// ------------------------------------------------------------------ -// -// HARDWARE TRIGGERED ANALOG INPUT SECTION -// -// ------------------------------------------------------------------ - -// -// Cancel analog input autoscan -// -static int me_ai_cancel(comedi_device * dev, comedi_subdevice * s) +/* + * ------------------------------------------------------------------ + * + * HARDWARE TRIGGERED ANALOG INPUT SECTION + * + * ------------------------------------------------------------------ + */ + +/* Cancel analog input autoscan */ +static int me_ai_cancel(comedi_device *dev, comedi_subdevice *s) { /* disable interrupts */ @@ -451,34 +448,30 @@ static int me_ai_cancel(comedi_device * dev, comedi_subdevice * s) return 0; } -// -// Test analog input command -// -static int me_ai_do_cmd_test(comedi_device * dev, - comedi_subdevice * s, comedi_cmd * cmd) +/* Test analog input command */ +static int me_ai_do_cmd_test(comedi_device *dev, comedi_subdevice *s, + comedi_cmd *cmd) { return 0; } -// -// Analog input command -// -static int me_ai_do_cmd(comedi_device * dev, comedi_subdevice * subdevice) +/* Analog input command */ +static int me_ai_do_cmd(comedi_device *dev, comedi_subdevice *subdevice) { return 0; } -// ------------------------------------------------------------------ -// -// ANALOG OUTPUT SECTION -// -// ------------------------------------------------------------------ - -// -// Analog instant output -// -static int me_ao_insn_write(comedi_device * dev, - comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +/* + * ------------------------------------------------------------------ + * + * ANALOG OUTPUT SECTION + * + * ------------------------------------------------------------------ + */ + +/* Analog instant output */ +static int me_ao_insn_write(comedi_device *dev, comedi_subdevice *s, + comedi_insn *insn, lsampl_t *data) { int chan; int rang; @@ -497,7 +490,8 @@ static int me_ao_insn_write(comedi_device * dev, chan = CR_CHAN((&insn->chanspec)[i]); rang = CR_RANGE((&insn->chanspec)[i]); - dev_private->dac_control &= ~(0x0880 >> chan); /* clear bits for this channel */ + /* clear bits for this channel */ + dev_private->dac_control &= ~(0x0880 >> chan); if (rang == 0) dev_private->dac_control |= ((DAC_BIPOLAR_A | DAC_GAIN_1_A) >> chan); @@ -525,11 +519,9 @@ static int me_ao_insn_write(comedi_device * dev, return i; } -// -// Analog output readback -// -static int me_ao_insn_read(comedi_device * dev, - comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +/* Analog output readback */ +static int me_ao_insn_read(comedi_device *dev, comedi_subdevice *s, + comedi_insn *insn, lsampl_t *data) { int i; @@ -541,18 +533,18 @@ static int me_ao_insn_read(comedi_device * dev, return 1; } -// ------------------------------------------------------------------ -// -// INITIALISATION SECTION -// -// ------------------------------------------------------------------ - -// -// Xilinx firmware download for card: ME-2600i -// - -static int me2600_xilinx_download(comedi_device * dev, unsigned char - *me2600_firmware, unsigned int length) +/* + * ------------------------------------------------------------------ + * + * INITIALISATION SECTION + * + * ------------------------------------------------------------------ + */ + +/* Xilinx firmware download for card: ME-2600i */ +static int me2600_xilinx_download(comedi_device *dev, + unsigned char *me2600_firmware, + unsigned int length) { unsigned int value; unsigned int file_length; @@ -581,32 +573,30 @@ static int me2600_xilinx_download(comedi_device * dev, unsigned char */ if (length < 16) return -EINVAL; - file_length = - (((unsigned int)me2600_firmware[0] & 0xff) << 24) + - (((unsigned int)me2600_firmware[1] & 0xff) << 16) + - (((unsigned int)me2600_firmware[2] & 0xff) << 8) + - ((unsigned int)me2600_firmware[3] & 0xff); + file_length = (((unsigned int)me2600_firmware[0] & 0xff) << 24) + + (((unsigned int)me2600_firmware[1] & 0xff) << 16) + + (((unsigned int)me2600_firmware[2] & 0xff) << 8) + + ((unsigned int)me2600_firmware[3] & 0xff); /* * Loop for writing firmware byte by byte to xilinx * Firmware data start at offfset 16 */ - for (i = 0; i < file_length; i++) { + for (i = 0; i < file_length; i++) writeb((me2600_firmware[16 + i] & 0xff), dev_private->me_regbase + 0x0); - } /* Write 5 dummy values to xilinx */ - for (i = 0; i < 5; i++) { + for (i = 0; i < 5; i++) writeb(0x00, dev_private->me_regbase + 0x0); - } /* Test if there was an error during download -> INTB was thrown */ value = readl(dev_private->plx_regbase + PLX_INTCSR); if (value & 0x20) { /* Disable interrupt */ writel(0x00, dev_private->plx_regbase + PLX_INTCSR); - printk("comedi%d: Xilinx download failed\n", dev->minor); + printk(KERN_ERR "comedi%d: Xilinx download failed\n", + dev->minor); return -EIO; } @@ -619,11 +609,8 @@ static int me2600_xilinx_download(comedi_device * dev, unsigned char return 0; } -// -// Reset device -// - -static int me_reset(comedi_device * dev) +/* Reset device */ +static int me_reset(comedi_device *dev) { /* Reset board */ writew(0x00, dev_private->me_regbase + ME_CONTROL_1); @@ -639,14 +626,13 @@ static int me_reset(comedi_device * dev) return 0; } -// -// Attach -// -// - Register PCI device -// - Declare device driver capability -// - -static int me_attach(comedi_device * dev, comedi_devconfig * it) +/* + * Attach + * + * - Register PCI device + * - Declare device driver capability + */ +static int me_attach(comedi_device *dev, comedi_devconfig *it) { struct pci_dev *pci_device; comedi_subdevice *subdevice; @@ -660,13 +646,11 @@ static int me_attach(comedi_device * dev, comedi_devconfig * it) resource_size_t regbase_tmp; int result, error, i; - // Allocate private memory - if (alloc_private(dev, sizeof(me_private_data_struct)) < 0) { + /* Allocate private memory */ + if (alloc_private(dev, sizeof(me_private_data_struct)) < 0) return -ENOMEM; - } -// -// Probe the device to determine what device in the series it is. -// + + /* Probe the device to determine what device in the series it is. */ for (pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); pci_device != NULL; pci_device = @@ -675,10 +659,14 @@ static int me_attach(comedi_device * dev, comedi_devconfig * it) for (i = 0; i < me_board_nbr; i++) { if (me_boards[i].device_id == pci_device->device) { - // was a particular bus/slot requested? + /* + * was a particular bus/slot requested? + */ if ((it->options[0] != 0) || (it->options[1] != 0)) { - // are we on the wrong bus/slot? + /* + * are we on the wrong bus/slot? + */ if (pci_device->bus->number != it->options[0] || PCI_SLOT(pci_device-> @@ -698,27 +686,27 @@ static int me_attach(comedi_device * dev, comedi_devconfig * it) } } - printk("comedi%d: no supported board found! (req. bus/slot : %d/%d)\n", - dev->minor, it->options[0], it->options[1]); + printk(KERN_ERR + "comedi%d: no supported board found! (req. bus/slot : %d/%d)\n", + dev->minor, it->options[0], it->options[1]); return -EIO; - found: - - printk("comedi%d: found %s at PCI bus %d, slot %d\n", +found: + printk(KERN_INFO "comedi%d: found %s at PCI bus %d, slot %d\n", dev->minor, me_boards[i].name, pci_device->bus->number, PCI_SLOT(pci_device->devfn)); - // Enable PCI device and request PCI regions + /* Enable PCI device and request PCI regions */ if (comedi_pci_enable(pci_device, ME_DRIVER_NAME) < 0) { - printk("comedi%d: Failed to enable PCI device and request regions\n", dev->minor); + printk(KERN_ERR "comedi%d: Failed to enable PCI device and " + "request regions\n", dev->minor); return -EIO; } - // Set data in device structure + /* Set data in device structure */ dev->board_name = board->name; - // Read PLX register base address [PCI_BASE_ADDRESS #0]. - + /* Read PLX register base address [PCI_BASE_ADDRESS #0]. */ plx_regbase_tmp = pci_resource_start(pci_device, 0); plx_regbase_size_tmp = pci_resource_len(pci_device, 0); dev_private->plx_regbase = @@ -728,18 +716,18 @@ static int me_attach(comedi_device * dev, comedi_devconfig * it) printk("comedi%d: Failed to remap I/O memory\n", dev->minor); return -ENOMEM; } - // Read Swap base address [PCI_BASE_ADDRESS #5]. + + /* Read Swap base address [PCI_BASE_ADDRESS #5]. */ swap_regbase_tmp = pci_resource_start(pci_device, 5); swap_regbase_size_tmp = pci_resource_len(pci_device, 5); - if (!swap_regbase_tmp) { - printk("comedi%d: Swap not present\n", dev->minor); - } + if (!swap_regbase_tmp) + printk(KERN_ERR "comedi%d: Swap not present\n", dev->minor); - /*----------------------------------------------------- Workaround start ---*/ + /*---------------------------------------------- Workaround start ---*/ if (plx_regbase_tmp & 0x0080) { - printk("comedi%d: PLX-Bug detected\n", dev->minor); + printk(KERN_ERR "comedi%d: PLX-Bug detected\n", dev->minor); if (swap_regbase_tmp) { regbase_tmp = plx_regbase_tmp; @@ -763,19 +751,20 @@ static int me_attach(comedi_device * dev, comedi_devconfig * it) return -EIO; } } - /*----------------------------------------------------- Workaround end -----*/ + /*--------------------------------------------- Workaround end -----*/ - // Read Meilhaus register base address [PCI_BASE_ADDRESS #2]. + /* Read Meilhaus register base address [PCI_BASE_ADDRESS #2]. */ me_regbase_tmp = pci_resource_start(pci_device, 2); me_regbase_size_tmp = pci_resource_len(pci_device, 2); dev_private->me_regbase_size = me_regbase_size_tmp; dev_private->me_regbase = ioremap(me_regbase_tmp, me_regbase_size_tmp); if (!dev_private->me_regbase) { - printk("comedi%d: Failed to remap I/O memory\n", dev->minor); + printk(KERN_ERR "comedi%d: Failed to remap I/O memory\n", + dev->minor); return -ENOMEM; } - // Download firmware and reset card + /* Download firmware and reset card */ if (board->device_id == ME2600_DEVICE_ID) { unsigned char *aux_data; int aux_len; @@ -784,8 +773,9 @@ static int me_attach(comedi_device * dev, comedi_devconfig * it) aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]; if (!aux_data || aux_len < 1) { - comedi_error(dev, - "You must provide me2600 firmware using the --init-data option of comedi_config"); + comedi_error(dev, "You must provide me2600 firmware " + "using the --init-data option of " + "comedi_config"); return -EINVAL; } me2600_xilinx_download(dev, aux_data, aux_len); @@ -793,9 +783,9 @@ static int me_attach(comedi_device * dev, comedi_devconfig * it) me_reset(dev); - // device driver capabilities - - if ((error = alloc_subdevices(dev, 3)) < 0) + /* device driver capabilities */ + error = alloc_subdevices(dev, 3); + if (error < 0) return error; subdevice = dev->subdevices + 0; @@ -831,15 +821,12 @@ static int me_attach(comedi_device * dev, comedi_devconfig * it) subdevice->insn_config = me_dio_insn_config; subdevice->io_bits = 0; - printk("comedi%d: " ME_DRIVER_NAME " attached.\n", dev->minor); + printk(KERN_INFO "comedi%d: "ME_DRIVER_NAME" attached.\n", dev->minor); return 0; } -// -// Detach -// - -static int me_detach(comedi_device * dev) +/* Detach */ +static int me_detach(comedi_device *dev) { if (dev_private) { if (dev_private->me_regbase) { @@ -849,9 +836,9 @@ static int me_detach(comedi_device * dev) if (dev_private->plx_regbase) iounmap(dev_private->plx_regbase); if (dev_private->pci_device) { - if (dev_private->plx_regbase_size) { + if (dev_private->plx_regbase_size) comedi_pci_disable(dev_private->pci_device); - } + pci_dev_put(dev_private->pci_device); } } -- 2.41.0