From 278a2f75b0809c1242b65af61c9b1823e697a323 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 11 Mar 2009 12:20:51 +0000 Subject: [PATCH] regulator: enumerate voltages (v2) Add a basic mechanism for regulators to report the discrete voltages they support: list_voltage() enumerates them using selectors numbered from 0 to an upper bound. Use those methods to force machine-level constraints into bounds. (Example: regulator supports 1.8V, 2.4V, 2.6V, 3.3V, and board constraints for that rail are 2.0V to 3.6V ... so the range of voltages is then 2.4V to 3.3V on this board.) Export those voltages to the regulator consumer interface, so for example regulator hooked up to an MMC/SD/SDIO slot can report the actual voltage options available to cards connected there. Signed-off-by: David Brownell Acked-by: Mark Brown Signed-off-by: Liam Girdwood Signed-off-by: Tony Lindgren --- drivers/regulator/core.c | 113 +++++++++++++++++++++++++++++ include/linux/regulator/consumer.h | 2 + include/linux/regulator/driver.h | 9 +++ 3 files changed, 124 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 0ff95c3ccf5..0f7cb38b069 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -719,6 +719,69 @@ static int set_machine_constraints(struct regulator_dev *rdev, else name = "regulator"; + /* constrain machine-level voltage specs to fit + * the actual range supported by this regulator. + */ + if (ops->list_voltage && rdev->desc->n_voltages) { + int count = rdev->desc->n_voltages; + int i; + int min_uV = INT_MAX; + int max_uV = INT_MIN; + int cmin = constraints->min_uV; + int cmax = constraints->max_uV; + + /* it's safe to autoconfigure fixed-voltage supplies */ + if (count == 1 && !cmin) { + cmin = INT_MIN; + cmax = INT_MAX; + } + + /* else require explicit machine-level constraints */ + else if (cmin <= 0 || cmax <= 0 || cmax < cmin) { + pr_err("%s: %s '%s' voltage constraints\n", + __func__, "invalid", name); + ret = -EINVAL; + goto out; + } + + /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */ + for (i = 0; i < count; i++) { + int value; + + value = ops->list_voltage(rdev, i); + if (value <= 0) + continue; + + /* maybe adjust [min_uV..max_uV] */ + if (value >= cmin && value < min_uV) + min_uV = value; + if (value <= cmax && value > max_uV) + max_uV = value; + } + + /* final: [min_uV..max_uV] valid iff constraints valid */ + if (max_uV < min_uV) { + pr_err("%s: %s '%s' voltage constraints\n", + __func__, "unsupportable", name); + ret = -EINVAL; + goto out; + } + + /* use regulator's subset of machine constraints */ + if (constraints->min_uV < min_uV) { + pr_debug("%s: override '%s' %s, %d -> %d\n", + __func__, name, "min_uV", + constraints->min_uV, min_uV); + constraints->min_uV = min_uV; + } + if (constraints->max_uV > max_uV) { + pr_debug("%s: override '%s' %s, %d -> %d\n", + __func__, name, "max_uV", + constraints->max_uV, max_uV); + constraints->max_uV = max_uV; + } + } + rdev->constraints = constraints; /* do we need to apply the constraint voltage */ @@ -1244,6 +1307,56 @@ int regulator_is_enabled(struct regulator *regulator) } EXPORT_SYMBOL_GPL(regulator_is_enabled); +/** + * regulator_count_voltages - count regulator_list_voltage() selectors + * @regulator: regulator source + * + * Returns number of selectors, or negative errno. Selectors are + * numbered starting at zero, and typically correspond to bitfields + * in hardware registers. + */ +int regulator_count_voltages(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + + return rdev->desc->n_voltages ? : -EINVAL; +} +EXPORT_SYMBOL_GPL(regulator_count_voltages); + +/** + * regulator_list_voltage - enumerate supported voltages + * @regulator: regulator source + * @selector: identify voltage to list + * Context: can sleep + * + * Returns a voltage that can be passed to @regulator_set_voltage(), + * zero if this selector code can't be used on this sytem, or a + * negative errno. + */ +int regulator_list_voltage(struct regulator *regulator, unsigned selector) +{ + struct regulator_dev *rdev = regulator->rdev; + struct regulator_ops *ops = rdev->desc->ops; + int ret; + + if (!ops->list_voltage || selector >= rdev->desc->n_voltages) + return -EINVAL; + + mutex_lock(&rdev->mutex); + ret = ops->list_voltage(rdev, selector); + mutex_unlock(&rdev->mutex); + + if (ret > 0) { + if (ret < rdev->constraints->min_uV) + ret = 0; + else if (ret > rdev->constraints->max_uV) + ret = 0; + } + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_list_voltage); + /** * regulator_set_voltage - set regulator output voltage * @regulator: regulator source diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 801bf77ff4e..3022821e841 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -140,6 +140,8 @@ int regulator_bulk_disable(int num_consumers, void regulator_bulk_free(int num_consumers, struct regulator_bulk_data *consumers); +int regulator_count_voltages(struct regulator *regulator); +int regulator_list_voltage(struct regulator *regulator, unsigned selector); int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV); int regulator_get_voltage(struct regulator *regulator); int regulator_set_current_limit(struct regulator *regulator, diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 6e957aae762..edf93a35f57 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -45,6 +45,10 @@ enum regulator_status { * @set_voltage: Set the voltage for the regulator within the range specified. * The driver should select the voltage closest to min_uV. * @get_voltage: Return the currently configured voltage for the regulator. + * @list_voltage: Return one of the supported voltages, in microvolts; zero + * if the selector indicates a voltage that is unusable on this system; + * or negative errno. Selectors range from zero to one less than + * regulator_desc.n_voltages. Voltages may be reported in any order. * * @set_current_limit: Configure a limit for a current-limited regulator. * @get_current_limit: Get the limit for a current-limited regulator. @@ -65,6 +69,9 @@ enum regulator_status { */ struct regulator_ops { + /* enumerate supported voltages */ + int (*list_voltage) (struct regulator_dev *, unsigned selector); + /* get/set regulator voltage */ int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV); int (*get_voltage) (struct regulator_dev *); @@ -123,6 +130,7 @@ enum regulator_type { * * @name: Identifying name for the regulator. * @id: Numerical identifier for the regulator. + * @n_voltages: Number of selectors available for ops.list_voltage(). * @ops: Regulator operations table. * @irq: Interrupt number for the regulator. * @type: Indicates if the regulator is a voltage or current regulator. @@ -131,6 +139,7 @@ enum regulator_type { struct regulator_desc { const char *name; int id; + unsigned n_voltages; struct regulator_ops *ops; int irq; enum regulator_type type; -- 2.41.0