From 275b2e283b139bee19e7de5929d01484b8e3ee51 Mon Sep 17 00:00:00 2001 From: Pantelis Koukousoulas Date: Wed, 27 Dec 2006 23:05:19 -0300 Subject: [PATCH] V4L/DVB (5034): Pvrusb2: Enable radio mode round #1 This is the logic that supports switching modes via e.g., echo radio > /sys/class/pvrusb2/sn-*/ctl_input/cur_val. To do the mode switching we need to: a) broadcast AUDC_SET_RADIO and b) issue the CX2341X_ENC_MUTE_VIDEO command to the encoder. The first is done by adding a new pvr2_i2c_op and having it trigger on input change, the second by adding this command in pvr2_encoder_start() and requesting an encoder restart on input change by setting stale_subsys_mask appropriately. The clues about AUDC_SET_RADIO and CX2341X_ENC_MUTE_VIDEO were kindly provided by Hans Verkuil on the pvrusb2 mailing list. The idea to implement mode switching this way (on input change) is due to Mike Isely. Why AUDC_SET_RADIO/VIDIOC_S_STD are used for switching? I can 't be sure, but I think this can be traced to a cornell student being the first to implement radio support in ivtv "as a different standard". I think the rest just evolved from there (it 's in the ivtv ML archives). Signed-off-by: Pantelis Koukousoulas Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-encoder.c | 3 ++ drivers/media/video/pvrusb2/pvrusb2-hdw.c | 7 +++++ .../video/pvrusb2/pvrusb2-i2c-chips-v4l2.c | 5 ++- .../video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c | 31 +++++++++++++++++-- .../video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h | 1 + 5 files changed, 44 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c index c94f97b7939..d094cac9f7a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c @@ -360,6 +360,9 @@ int pvr2_encoder_start(struct pvr2_hdw *hdw) pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000481); pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000000); + pvr2_encoder_vcmd(hdw,CX2341X_ENC_MUTE_VIDEO,1, + hdw->input_val == PVR2_CVAL_INPUT_RADIO ? 1 : 0); + if (hdw->config == pvr2_config_vbi) { status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_START_CAPTURE,2, 0x01,0x14); diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 503255cebc2..5f6ab998bbe 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -2260,6 +2260,13 @@ static int pvr2_hdw_commit_ctl_internal(struct pvr2_hdw *hdw) stale_subsys_mask |= (1<input_dirty) { + /* pk: If input changes to or from radio, then the encoder + needs to be restarted (for ENC_MUTE_VIDEO to work) */ + stale_subsys_mask |= (1<srate_dirty) { /* Write new sample rate into control structure since * the master copy is stale. We must track srate diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c index 05121666b9b..93b8d077c11 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c @@ -39,6 +39,7 @@ #define OP_AUDIORATE 4 #define OP_SIZE 5 #define OP_LOG 6 +#define OP_RADIO 7 static const struct pvr2_i2c_op * const ops[] = { [OP_STANDARD] = &pvr2_i2c_op_v4l2_standard, @@ -47,6 +48,7 @@ static const struct pvr2_i2c_op * const ops[] = { [OP_FREQ] = &pvr2_i2c_op_v4l2_frequency, [OP_SIZE] = &pvr2_i2c_op_v4l2_size, [OP_LOG] = &pvr2_i2c_op_v4l2_log, + [OP_RADIO] = &pvr2_i2c_op_v4l2_radio, }; void pvr2_i2c_probe(struct pvr2_hdw *hdw,struct pvr2_i2c_client *cp) @@ -58,7 +60,8 @@ void pvr2_i2c_probe(struct pvr2_hdw *hdw,struct pvr2_i2c_client *cp) (1 << OP_VOLUME) | (1 << OP_FREQ) | (1 << OP_SIZE) | - (1 << OP_LOG)); + (1 << OP_LOG) | + (1 << OP_RADIO)); if (id == I2C_DRIVERID_MSP3400) { if (pvr2_i2c_msp3400_setup(hdw,cp)) { diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c index 05ea17afe90..50fcceb15d5 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c @@ -24,7 +24,7 @@ #include "pvrusb2-hdw-internal.h" #include "pvrusb2-debug.h" #include - +#include /* AUDC_SET_RADIO */ static void set_standard(struct pvr2_hdw *hdw) { @@ -50,6 +50,32 @@ const struct pvr2_i2c_op pvr2_i2c_op_v4l2_standard = { }; +static void set_radio(struct pvr2_hdw *hdw) +{ + pvr2_trace(PVR2_TRACE_CHIPS, + "i2c v4l2 set_radio()"); + + if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { + pvr2_i2c_core_cmd(hdw,AUDC_SET_RADIO,NULL); + } else { + set_standard(hdw); + } +} + + +static int check_radio(struct pvr2_hdw *hdw) +{ + return hdw->input_dirty != 0; +} + + +const struct pvr2_i2c_op pvr2_i2c_op_v4l2_radio = { + .check = check_radio, + .update = set_radio, + .name = "v4l2_radio", +}; + + static void set_bcsh(struct pvr2_hdw *hdw) { struct v4l2_control ctrl; @@ -145,7 +171,8 @@ static void set_frequency(struct pvr2_hdw *hdw) memset(&freq,0,sizeof(freq)); freq.frequency = fv / 62500; freq.tuner = 0; - freq.type = V4L2_TUNER_ANALOG_TV; + freq.type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; pvr2_i2c_core_cmd(hdw,VIDIOC_S_FREQUENCY,&freq); } diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h index ecabddba1ec..894de610893 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h @@ -26,6 +26,7 @@ #include "pvrusb2-i2c-core.h" extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_standard; +extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_radio; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_bcsh; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_volume; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_frequency; -- 2.41.0