From 198f29358a31cdca1a496d19da90bd5d6c8527ce Mon Sep 17 00:00:00 2001 From: Mark Jackson Date: Mon, 13 Oct 2008 10:46:27 +0000 Subject: [PATCH] avr32: Fix MIMC200 board use of SPD network pins The MIMC200 board uses the SPD output pin from the Ethernet MACs for other purposes. One of these is as a board-reset, so I've had to #define off the SPD output pin declaration. This is probably not the best way of achieving this, but works in the current framework. Signed-off-by: Mark Jackson Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/at32ap700x.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 813b6844cdf..caec25a2eec 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1091,7 +1091,9 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data) pin_mask |= (1 << 11); /* RXD2 */ pin_mask |= (1 << 12); /* RXD3 */ pin_mask |= (1 << 14); /* RXCK */ +#ifndef CONFIG_BOARD_MIMC200 pin_mask |= (1 << 18); /* SPD */ +#endif } select_peripheral(PIOC, pin_mask, PERIPH_A, 0); @@ -1112,8 +1114,10 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data) pin_mask |= (1 << 3); /* MDC */ pin_mask |= (1 << 2); /* MDIO */ +#ifndef CONFIG_BOARD_MIMC200 if (!data->is_rmii) pin_mask |= (1 << 15); /* SPD */ +#endif select_peripheral(PIOD, pin_mask, PERIPH_B, 0); -- 2.41.0