From 1678df37be8abbb381becdc40242ed915e775550 Mon Sep 17 00:00:00 2001 From: John Keller Date: Thu, 31 Aug 2006 21:27:51 -0700 Subject: [PATCH] [PATCH] sgiioc4: fixup use of mmio ops Fix some bugs in the patch that converted the IOC4 driver from port IO ops to memio ops. http://marc.theaimsgroup.com/?l=linux-ide&m=114895892231438&w=2 Problems fixed are: - Call to default_hwif_mmiops() was not being done until _after_ first IO operation, resulting in the first IO operation being done as a port IO op, instead of memio. - request_region() calls needed to be request_mem_region() - Incomplete error case handling. - Non-usage of ioremap() and __iomem. Signed-off-by: John Keller Signed-off-by: Jeremy Higdon Cc: Alan Cox Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ide/pci/sgiioc4.c | 60 +++++++++++++++++++++++++++------------ 1 file changed, 42 insertions(+), 18 deletions(-) diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index e125032bb40..d8a0d87df73 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -367,12 +367,13 @@ sgiioc4_INB(unsigned long port) static void __devinit ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) { + void __iomem *virt_dma_base; int num_ports = sizeof (ioc4_dma_regs_t); printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name, dma_base, dma_base + num_ports - 1); - if (!request_region(dma_base, num_ports, hwif->name)) { + if (!request_mem_region(dma_base, num_ports, hwif->name)) { printk(KERN_ERR "%s(%s) -- ERROR, Addresses 0x%p to 0x%p " "ALREADY in use\n", @@ -381,13 +382,21 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) goto dma_alloc_failure; } - hwif->dma_base = dma_base; + virt_dma_base = ioremap(dma_base, num_ports); + if (virt_dma_base == NULL) { + printk(KERN_ERR + "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n", + __FUNCTION__, hwif->name, dma_base, dma_base + num_ports - 1); + goto dma_remap_failure; + } + hwif->dma_base = (unsigned long) virt_dma_base; + hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES, &hwif->dmatable_dma); if (!hwif->dmatable_cpu) - goto dma_alloc_failure; + goto dma_pci_alloc_failure; hwif->sg_max_nents = IOC4_PRD_ENTRIES; @@ -411,6 +420,12 @@ dma_base2alloc_failure: printk(KERN_INFO "Changing from DMA to PIO mode for Drive %s\n", hwif->name); +dma_pci_alloc_failure: + iounmap(virt_dma_base); + +dma_remap_failure: + release_mem_region(dma_base, num_ports); + dma_alloc_failure: /* Disable DMA because we couldnot allocate any DMA maps */ hwif->autodma = 0; @@ -607,18 +622,15 @@ ide_init_sgiioc4(ide_hwif_t * hwif) hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq; hwif->ide_dma_timeout = &__ide_dma_timeout; - /* - * The IOC4 uses MMIO rather than Port IO. - * It also needs special workarounds for INB. - */ - default_hwif_mmiops(hwif); hwif->INB = &sgiioc4_INB; } static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) { - unsigned long base, ctl, dma_base, irqport; + unsigned long cmd_base, dma_base, irqport; + unsigned long bar0, cmd_phys_base, ctl; + void __iomem *virt_base; ide_hwif_t *hwif; int h; @@ -636,23 +648,32 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) } /* Get the CmdBlk and CtrlBlk Base Registers */ - base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET; - ctl = pci_resource_start(dev, 0) + IOC4_CTRL_OFFSET; - irqport = pci_resource_start(dev, 0) + IOC4_INTR_OFFSET; + bar0 = pci_resource_start(dev, 0); + virt_base = ioremap(bar0, pci_resource_len(dev, 0)); + if (virt_base == NULL) { + printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n", + d->name, bar0); + return -ENOMEM; + } + cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET; + ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET; + irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET; dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; - if (!request_region(base, IOC4_CMD_CTL_BLK_SIZE, hwif->name)) { + cmd_phys_base = bar0 + IOC4_CMD_OFFSET; + if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, + hwif->name)) { printk(KERN_ERR - "%s : %s -- ERROR, Port Addresses " + "%s : %s -- ERROR, Addresses " "0x%p to 0x%p ALREADY in use\n", - __FUNCTION__, hwif->name, (void *) base, - (void *) base + IOC4_CMD_CTL_BLK_SIZE); + __FUNCTION__, hwif->name, (void *) cmd_phys_base, + (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); return -ENOMEM; } - if (hwif->io_ports[IDE_DATA_OFFSET] != base) { + if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base) { /* Initialize the IO registers */ - sgiioc4_init_hwif_ports(&hwif->hw, base, ctl, irqport); + sgiioc4_init_hwif_ports(&hwif->hw, cmd_base, ctl, irqport); memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof (hwif->io_ports)); hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; @@ -665,6 +686,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) hwif->cds = (struct ide_pci_device_s *) d; hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */ + /* The IOC4 uses MMIO rather than Port IO. */ + default_hwif_mmiops(hwif); + /* Initializing chipset IRQ Registers */ hwif->OUTL(0x03, irqport + IOC4_INTR_SET * 4); -- 2.41.0