]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
16 years ago[PARISC] move VMALLOC_* definitions to fixmap.h
Kyle McMartin [Mon, 18 Feb 2008 22:13:43 +0000 (14:13 -0800)]
[PARISC] move VMALLOC_* definitions to fixmap.h

They make way more sense here, really...

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
16 years ago[PARISC] wire up timerfd syscalls
Kyle McMartin [Mon, 18 Feb 2008 22:00:18 +0000 (14:00 -0800)]
[PARISC] wire up timerfd syscalls

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
16 years ago[PARISC] remove old timerfd syscall
Kyle McMartin [Mon, 18 Feb 2008 21:57:26 +0000 (13:57 -0800)]
[PARISC] remove old timerfd syscall

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
16 years agoLinux 2.6.25-rc5 v2.6.25-rc5
Linus Torvalds [Mon, 10 Mar 2008 05:22:27 +0000 (22:22 -0700)]
Linux 2.6.25-rc5

16 years agoDo not include linux/backing-dev.h twice
Jesper Juhl [Mon, 10 Mar 2008 00:12:08 +0000 (01:12 +0100)]
Do not include linux/backing-dev.h twice

Don't include linux/backing-dev.h twice in mm/filemap.c, it's pointless.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt
Linus Torvalds [Sun, 9 Mar 2008 17:06:49 +0000 (10:06 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt

* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
  time: remove obsolete CLOCK_TICK_ADJUST
  time: don't touch an offlined CPU's ts->tick_stopped in tick_cancel_sched_timer()
  time: prevent the loop in timespec_add_ns() from being optimised away
  ntp: use unsigned input for do_div()

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Sun, 9 Mar 2008 17:06:14 +0000 (10:06 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] skcipher: Fix section mismatches

16 years agoalpha: fix iommu-related boot panic
Ivan Kokshaysky [Sun, 9 Mar 2008 13:31:17 +0000 (16:31 +0300)]
alpha: fix iommu-related boot panic

This fixes a boot panic due to a typo in the recent iommu patchset from
FUJITA Tomonori <tomof@acm.org> - the code used dma_get_max_seg_size()
instead of dma_get_seg_boundary().

It also removes a couple of unnecessary BUG_ON() and ALIGN() macros.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reported-and-tested-by: Bob Tracy <rct@frus.com>
Acked-by: FUJITA Tomonori <tomof@acm.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocpu hotplug: adjust root-domain->online span in response to hotplug event
Gregory Haskins [Sat, 8 Mar 2008 05:10:15 +0000 (00:10 -0500)]
cpu hotplug: adjust root-domain->online span in response to hotplug event

We currently set the root-domain online span automatically when the
domain is added to the cpu if the cpu is already a member of
cpu_online_map.

This was done as a hack/bug-fix for s2ram, but it also causes a problem
with hotplug CPU_DOWN transitioning.  The right way to fix the original
problem is to actually respond to CPU_UP events, instead of CPU_ONLINE,
which is already too late.

This solves the hung reboot regression reported by Andrew Morton and
others.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agotime: remove obsolete CLOCK_TICK_ADJUST
Roman Zippel [Tue, 4 Mar 2008 23:14:26 +0000 (15:14 -0800)]
time: remove obsolete CLOCK_TICK_ADJUST

The first version of the ntp_interval/tick_length inconsistent usage patch was
recently merged as bbe4d18ac2e058c56adb0cd71f49d9ed3216a405

http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bbe4d18ac2e058c56adb0cd71f49d9ed3216a405

While the fix did greatly improve the situation, it was correctly pointed out
by Roman that it does have a small bug: If the users change clocksources after
the system has been running and NTP has made corrections, the correctoins made
against the old clocksource will be applied against the new clocksource,
causing error.

The second attempt, which corrects the issue in the NTP_INTERVAL_LENGTH
definition has also made it up-stream as commit
e13a2e61dd5152f5499d2003470acf9c838eab84

http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e13a2e61dd5152f5499d2003470acf9c838eab84

Roman has correctly pointed out that CLOCK_TICK_ADJUST is calculated
based on the PIT's frequency, and isn't really relevant to non-PIT
driven clocksources (that is, clocksources other then jiffies and pit).

This patch reverts both of those changes, and simply removes
CLOCK_TICK_ADJUST.

This does remove the granularity error correction for users of PIT and Jiffies
clocksource users, but the granularity error but for the majority of users, it
should be within the 500ppm range NTP can accommodate for.

For systems that have granularity errors greater then 500ppm, the
"ntp_tick_adj=" boot option can be used to compensate.

[johnstul@us.ibm.com: provided changelog]
[mattilinnanvuori@yahoo.com: maek ntp_tick_adj static]
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: john stultz <johnstul@us.ibm.com>
Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agotime: don't touch an offlined CPU's ts->tick_stopped in tick_cancel_sched_timer()
Karsten Wiese [Tue, 4 Mar 2008 22:59:55 +0000 (14:59 -0800)]
time: don't touch an offlined CPU's ts->tick_stopped in tick_cancel_sched_timer()

Silences WARN_ONs in rcu_enter_nohz() and rcu_exit_nohz(), which appeared
before caused by (repeated) calls to:
        $ echo 0 > /sys/devices/system/cpu/cpu1/online
        $ echo 1 > /sys/devices/system/cpu/cpu1/online

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: johnstul@us.ibm.com
Cc: Rafael Wysocki <rjw@sisk.pl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agotime: prevent the loop in timespec_add_ns() from being optimised away
Segher Boessenkool [Tue, 4 Mar 2008 22:59:54 +0000 (14:59 -0800)]
time: prevent the loop in timespec_add_ns() from being optimised away

Since some architectures don't support __udivdi3().

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agontp: use unsigned input for do_div()
David Howells [Mon, 25 Feb 2008 17:31:57 +0000 (18:31 +0100)]
ntp: use unsigned input for do_div()

The kernel NTP code shouldn't hand 64-bit *signed* values to do_div().  Make it
instead hand 64-bit unsigned values.  This gets rid of a couple of warnings.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agoFix waitid si_code regression
Roland McGrath [Sat, 8 Mar 2008 19:41:22 +0000 (11:41 -0800)]
Fix waitid si_code regression

In commit ee7c82da830ea860b1f9274f1f0cdf99f206e7c2 ("wait_task_stopped:
simplify and fix races with SIGCONT/SIGKILL/untrace"), the magic (short)
cast when storing si_code was lost in wait_task_stopped.  This leaks the
in-kernel CLD_* values that do not match what userland expects.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years ago[CRYPTO] skcipher: Fix section mismatches
Herbert Xu [Sat, 8 Mar 2008 12:29:43 +0000 (20:29 +0800)]
[CRYPTO] skcipher: Fix section mismatches

The previous patch to move chainiv and eseqiv into blkcipher created
a section mismatch for the chainiv exit function which was also called
from __init.  This patch removes the __exit marking on it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
16 years agox86_64: make ptrace always sign-extend orig_ax to 64 bits
Roland McGrath [Fri, 7 Mar 2008 22:56:02 +0000 (14:56 -0800)]
x86_64: make ptrace always sign-extend orig_ax to 64 bits

This makes 64-bit ptrace calls setting the 64-bit orig_ax field for a
32-bit task sign-extend the low 32 bits up to 64.  This matches what a
64-bit debugger expects when tracing a 32-bit task.

This follows on my "x86_64 ia32 syscall restart fix".  This didn't
matter until that was fixed.

The debugger ignores or zeros the high half of every register slot it
sets (including the orig_rax pseudo-register) uniformly.  It expects
that the setting of the low 32 bits always has the same meaning as a
32-bit debugger setting those same 32 bits with native 32-bit
facilities.

This never arose before because the syscall restart check never
matched any -ERESTART* values due to lack of sign extension.  Before
that fix, even 32-bit ptrace setting orig_eax to -1 failed to trigger
the restart check anyway.  So this was never noticed as a regression
of 64-bit debuggers vs 32-bit debuggers on the same 64-bit kernel.

Signed-off-by: Roland McGrath <roland@redhat.com>
[ Changed to just do the sign-extension unconditionally on x86-64,
  since orig_ax is always just a small integer and doesn't need
  the full 64-bit range ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agobluetooth: Add another Broadcom device
Karsten Keil [Fri, 7 Mar 2008 20:10:34 +0000 (21:10 +0100)]
bluetooth: Add another Broadcom device

This adds another Broadcom BCM2045 based device to the blacklist, with
these settings the micro dongle works on my system.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'slab-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm
Linus Torvalds [Fri, 7 Mar 2008 21:49:32 +0000 (13:49 -0800)]
Merge branch 'slab-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm

* 'slab-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm:
  slub: fix typo in Documentation/vm/slub.txt
  slab: NUMA slab allocator migration bugfix
  slub: Do not cross cacheline boundaries for very small objects
  slab - use angle brackets for include of kmalloc_sizes.h
  slab numa fallback logic: Do not pass unfiltered flags to page allocator
  slub statistics: Fix check for DEACTIVATE_REMOTE_FREES

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Fri, 7 Mar 2008 21:17:59 +0000 (13:17 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: update references to Documentation/ide/ide.txt (v2)
  ide: move ide.txt to Documentation/ide/
  ide: fix buggy code in ide_register_hw()
  ide: fix enabling DMA on it821x in "smart" mode
  ide-cd: mark REQ_TYPE_ATA_PC write requests with REQ_RW flag

16 years agoide: update references to Documentation/ide/ide.txt (v2)
Randy Dunlap [Fri, 7 Mar 2008 20:53:50 +0000 (21:53 +0100)]
ide: update references to Documentation/ide/ide.txt (v2)

Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: move ide.txt to Documentation/ide/
Randy Dunlap [Fri, 7 Mar 2008 20:53:50 +0000 (21:53 +0100)]
ide: move ide.txt to Documentation/ide/

Cleanup some of Documentation directory:
Move Documentation/ide.txt to the ide/ sub-directory.
Fix trailing whitespace while there.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: fix buggy code in ide_register_hw()
Peter Teoh [Fri, 7 Mar 2008 20:53:49 +0000 (21:53 +0100)]
ide: fix buggy code in ide_register_hw()

Relocating the index to come after finding the hwif pointer.

Signed-off-by: Peter Teoh <htmldeveloper@gmail.com>
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: fix enabling DMA on it821x in "smart" mode
Bartlomiej Zolnierkiewicz [Fri, 7 Mar 2008 20:53:49 +0000 (21:53 +0100)]
ide: fix enabling DMA on it821x in "smart" mode

ide_tune_dma() should return '1' if IDE_HFLAG_NO_SET_MODE host flag is set.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: mark REQ_TYPE_ATA_PC write requests with REQ_RW flag
Bartlomiej Zolnierkiewicz [Fri, 7 Mar 2008 20:53:49 +0000 (21:53 +0100)]
ide-cd: mark REQ_TYPE_ATA_PC write requests with REQ_RW flag

On Thursday 06 March 2008, walt wrote:

> For me, this commit causes the problem it's intended to fix:
>
> commit 9f10d9ee0ac6d79d7bc8b9a158bf4a29322d84d3
> Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Date:   Tue Feb 26 21:50:35 2008 +0100
>
>      ide-cd: fix 'ireason' handling for REQ_TYPE_ATA_PC requests
>
>      This fixes some hangs caused by not finishing the transfer before ending
>      the request and also makes use of 'ireason == 1' quirk for spurious IRQs.
>
> When I mount a CD there is a long delay, and I see this error message:
>
> hdc: ide_cd_check_ireason: wrong transfer direction!
> cdrom: failed setting lba address space
> hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was: unknown
> hdc: drive not ready for command
> <repeated many times>
>
> When I revert this commit everything works properly again, including
> CD burning.

It turned out that REQ_TYPE_ATA_PC write requests were not marked as such
(the previous commit assumed them to be).

Reported-by: walt <w41ter@gmail.com>
Tested-by: walt <w41ter@gmail.com>
Reviewed-by: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoMerge branch 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Fri, 7 Mar 2008 20:08:07 +0000 (12:08 -0800)]
Merge branch 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix dentry revalidation for NFSv4 referrals and mountpoint crossings
  NFS: Fix the fsid revalidation in nfs_update_inode()
  SUNRPC: Fix a nfs4 over rdma transport oops
  NFS: Fix an f_mode/f_flags confusion in fs/nfs/write.c

16 years agoNFS: Fix dentry revalidation for NFSv4 referrals and mountpoint crossings
Trond Myklebust [Thu, 6 Mar 2008 17:34:59 +0000 (12:34 -0500)]
NFS: Fix dentry revalidation for NFSv4 referrals and mountpoint crossings

As long as the directory contents haven't changed, we should just let the
path walk proceed to cross the mountpoint. Apart from being an optimisation
in the case of 'nohide' mountpoint traversals, it also fixes an issue with
referrals: referral inodes don't have valid filehandles, so calling
nfs_revalidate_inode() on them is a bug.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
16 years agoNFS: Fix the fsid revalidation in nfs_update_inode()
Trond Myklebust [Thu, 6 Mar 2008 17:34:50 +0000 (12:34 -0500)]
NFS: Fix the fsid revalidation in nfs_update_inode()

When we detect that we've crossed a mountpoint on the remote server, we
must take care not to use that inode to revalidate the fsid on our
current superblock. To do so, we label the inode as a remote mountpoint,
and check for that in nfs_update_inode().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
16 years agoSUNRPC: Fix a nfs4 over rdma transport oops
Tom Talpey [Wed, 27 Feb 2008 20:04:26 +0000 (15:04 -0500)]
SUNRPC: Fix a nfs4 over rdma transport oops

Prevent an RPC oops when freeing a dynamically allocated RDMA
buffer, used in certain special-case large metadata operations.

Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
16 years agoNFS: Fix an f_mode/f_flags confusion in fs/nfs/write.c
Trond Myklebust [Mon, 25 Feb 2008 23:56:29 +0000 (15:56 -0800)]
NFS: Fix an f_mode/f_flags confusion in fs/nfs/write.c

O_SYNC is stored in filp->f_flags.
Thanks to Al Viro for pointing out the bug.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
16 years agogigaset: fix Oops on module unload regression
Tilman Schmidt [Fri, 7 Mar 2008 18:47:08 +0000 (19:47 +0100)]
gigaset: fix Oops on module unload regression

The card state mutex was only initialized when a device was connected,
but used during unload unconditionally, leading to an Oops if a driver
was loaded and unloaded again without ever connecting a device.

Fix this by initializing the mutex as soon as the structure is allocated.
Also add a missing mutex unlock revealed in the same execution path.

This fixes a possible Oops in 2.6.25-rc that was introduced by commit
e468c04894f36045cf93d1384183a461014b6840 ("Gigaset: permit module
unload").

Thanks to Roland Kletzing for reporting this problem.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Tested-by: Roland Kletzing <devzero@web.de>
Cc: Hansjoerg Lipp <hjlipp@web.de>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux...
Linus Torvalds [Fri, 7 Mar 2008 18:08:17 +0000 (10:08 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel:
  sched: don't allow rt_runtime_us to be zero for groups having rt tasks
  sched: rt-group: fixup schedulability constraints calculation
  sched: fix the wrong time slice value for SCHED_FIFO tasks
  sched: export task_nice
  sched: balance RT task resched only on runqueue
  sched: retain vruntime

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux...
Linus Torvalds [Fri, 7 Mar 2008 18:05:57 +0000 (10:05 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86-boot: don't request VBE2 information
  x86: re-add reboot fixups
  x86: fix typo in step.c
  x86: fix merge mistake in i387.c
  x86: clear DF before calling signal handler

16 years agodrivers/char/esp.c: fix bootup lockup
Ingo Molnar [Fri, 7 Mar 2008 09:47:43 +0000 (10:47 +0100)]
drivers/char/esp.c: fix bootup lockup

randconfig testing found a bootup lockup in drivers/char/esp.c because
of a spinlock that wasn't correctly initialized.

I'm not sure why it became more prominent in 2.6.25-rc4, the bug seems
rather old and i've been doing allyesconfig bootups for ages with
CONFIG_ESP enabled.

This fixes this bootup lockup:

 PM: Adding info for No Bus:ttyP63
 ttyP32 at 0x0240 (irq = 0) is an ESP primary port
 BUG: spinlock lockup on CPU#0, swapper/1, f56dd004
 Pid: 1, comm: swapper Not tainted 2.6.25-rc4-sched-devel.git-x86-latest.git #402 [<c03ac6f4>] _raw_spin_lock+0x134/0x140
  [<c08649be>] _spin_lock_irqsave+0x5e/0x80
  [<c0b9fbfe>] ? espserial_init+0x2be/0x6e0
  [<c0b9fbfe>] espserial_init+0x2be/0x6e0
  [<c0b877a3>] kernel_init+0x83/0x260
  [<c0b9f940>] ? espserial_init+0x0/0x6e0
  [<c010416a>] ? restore_nocheck_notrace+0x0/0xe
  [<c0b87720>] ? kernel_init+0x0/0x260
  [<c0b87720>] ? kernel_init+0x0/0x260
  [<c0104507>] kernel_thread_helper+0x7/0x10
  =======================

kzalloc() is not the way to initialize spinlocks anymore.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agosched: don't allow rt_runtime_us to be zero for groups having rt tasks
Dhaval Giani [Thu, 28 Feb 2008 09:51:56 +0000 (15:21 +0530)]
sched: don't allow rt_runtime_us to be zero for groups having rt tasks

This patch checks if we can set the rt_runtime_us to 0. If there is a
realtime task in the group, we don't want to set the rt_runtime_us as 0
or bad things will happen. (that task wont get any CPU time despite
being TASK_RUNNNG)

Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agosched: rt-group: fixup schedulability constraints calculation
Peter Zijlstra [Wed, 27 Feb 2008 11:00:46 +0000 (12:00 +0100)]
sched: rt-group: fixup schedulability constraints calculation

it was only possible to configure the rt-group scheduling parameters
beyond the default value in a very small range.

that's because div64_64() has a different calling convention than
do_div() :/

fix a few untidies while we are here; sysctl_sched_rt_period may overflow
due to that multiplication, so cast to u64 first. Also that RUNTIME_INF
juggling makes little sense although its an effective NOP.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agosched: fix the wrong time slice value for SCHED_FIFO tasks
Miao Xie [Fri, 7 Mar 2008 01:35:06 +0000 (09:35 +0800)]
sched: fix the wrong time slice value for SCHED_FIFO tasks

Function sys_sched_rr_get_interval returns wrong time slice value for
SCHED_FIFO tasks. The time slice for SCHED_FIFO tasks should be 0.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agosched: export task_nice
Pavel Roskin [Wed, 5 Mar 2008 21:56:37 +0000 (16:56 -0500)]
sched: export task_nice

The API is trivial, and so is the implementation.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agosched: balance RT task resched only on runqueue
Steven Rostedt [Wed, 5 Mar 2008 15:00:12 +0000 (10:00 -0500)]
sched: balance RT task resched only on runqueue

Sripathi Kodi reported a crash in the -rt kernel:

  https://bugzilla.redhat.com/show_bug.cgi?id=435674

this is due to a place that can reschedule a task without holding
the tasks runqueue lock.  This was caused by the RT balancing code
that pulls RT tasks to the current run queue and will reschedule the
current task.

There's a slight chance that the pulling of the RT tasks will release
the current runqueue's lock and retake it (in the double_lock_balance).
During this time that the runqueue is released, the current task can
migrate to another runqueue.

In the prio_changed_rt code, after the pull, if the current task is of
lesser priority than one of the RT tasks pulled, resched_task is called
on the current task. If the current task had migrated in that small
window, resched_task will be called without holding the runqueue lock
for the runqueue that the task is on.

This race condition also exists in the mainline kernel and this patch
adds a check to make sure the task hasn't migrated before calling
resched_task.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Tested-by: Sripathi Kodi <sripathik@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agosched: retain vruntime
Peter Zijlstra [Fri, 29 Feb 2008 20:21:01 +0000 (15:21 -0500)]
sched: retain vruntime

Kei Tokunaga reported an interactivity problem when moving tasks
between control groups.

Tasks would retain their old vruntime when moved between groups, this
can cause funny lags. Re-set the vruntime on group move to fit within
the new tree.

Reported-by: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86-boot: don't request VBE2 information
Peter Korsgaard [Thu, 6 Mar 2008 09:56:45 +0000 (10:56 +0100)]
x86-boot: don't request VBE2 information

The new x86 setup code (4fd06960f120) broke booting on an old P3/500MHz
with an onboard Voodoo3 of mine. After debugging it, it turned out
to be caused by the fact that the vesa probing now asks for VBE2 data.

Disassembing the video BIOS shows that it overflows the vesa_general_info
structure when VBE2 data is requested because the source addresses for the
information strings which get strcpy'ed to the buffer lie outside the 32K
BIOS code (and hence contain long sequences of 0xff's).

E.G.:

get_vbe_controller_info:
00002A9C  60                pushaw
00002A9D  1E                push ds
00002A9E  0E                push cs
00002A9F  1F                pop ds
00002AA0  2BC9              sub cx,cx
00002AA2  6626813D56424532  cmp dword [es:di],0x32454256 ; "VBE2"
00002AAA  7501              jnz .1
00002AAC  41                inc cx
.1:
00002AAD  51                push cx
00002AAE  B91400            mov cx,0x14
00002AB1  BED47F            mov si, controller_header
00002AB4  57                push di
00002AB5  F3A4              rep movsb ; copy vbe1.2 header

00002AB7  B9EC00            mov cx,0xec
00002ABA  2AC0              sub al,al
00002ABC  F3AA              rep stosb ; zero pad remainder

00002ABE  5F                pop di
00002ABF  E8EB0D            call word get_memory
00002AC2  C1E002            shl ax,0x2
00002AC5  26894512          mov [es:di+0x12],ax ; total memory
00002AC9  26C745040003      mov word [es:di+0x4],0x300 ; VBE version
00002ACF  268C4D08          mov [es:di+0x8],cs
00002AD3  268C4D10          mov [es:di+0x10],cs
00002AD7  59                pop cx
00002AD8  E361              jcxz .done ; VBE2 requested?
00002ADA  8D9D0001          lea bx,[di+0x100]
00002ADE  53                push bx
00002ADF  87DF              xchg bx,di ; di now points to 2nd half
00002AE1  26C747140001      mov word [es:bx+0x14],0x100 ; sw rev

00002AE7  26897F06          mov [es:bx+0x6],di ; oem string
00002AEB  268C4708          mov [es:bx+0x8],es
00002AEF  BE5280            mov si,0x8052 ; oem string
00002AF2  E87A1B            call word strcpy

00002AF5  26897F0E          mov [es:bx+0xe],di ; video mode list
00002AF9  268C4710          mov [es:bx+0x10],es
00002AFD  B91E00            mov cx,0x1e
00002B00  BEE87F            mov si,vidmodes
00002B03  F3A5              rep movsw

00002B05  26897F16          mov [es:bx+0x16],di ; oem vendor
00002B09  268C4718          mov [es:bx+0x18],es
00002B0D  BE2480            mov si,0x8024 ; oem vendor
00002B10  E85C1B            call word strcpy

00002B13  26897F1A          mov [es:bx+0x1a],di ; oem product
00002B17  268C471C          mov [es:bx+0x1c],es
00002B1B  BE3880            mov si,0x8038 ; oem product
00002B1E  E84E1B            call word strcpy

00002B21  26897F1E          mov [es:bx+0x1e],di ; oem product rev
00002B25  268C4720          mov [es:bx+0x20],es
00002B29  BE4580            mov si,0x8045 ; oem product rev
00002B2C  E8401B            call word strcpy

00002B2F  58                pop ax
00002B30  B90001            mov cx,0x100
00002B33  2BCF              sub cx,di
00002B35  03C8              add cx,ax
00002B37  2AC0              sub al,al
00002B39  F3AA              rep stosb ; zero pad
.done:
00002B3B  1F                pop ds
00002B3C  61                popaw
00002B3D  B84F00            mov ax,0x4f
00002B40  C3                ret

(The full BIOS can be found at http://peter.korsgaard.com/vgabios.bin
if interested).

The old setup code didn't ask for VBE2 info, and the new code doesn't
actually do anything with the extra information, so the fix is to simply
not request it. Other BIOS'es might have the same problem.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: re-add reboot fixups
Ingo Molnar [Thu, 6 Mar 2008 17:29:43 +0000 (18:29 +0100)]
x86: re-add reboot fixups

Jan Beulich noticed that the reboot fixups went missing during
reboot.c unification.

(commit 4d022e35fd7e07c522c7863fee6f07e53cf3fc14)

Geode and a few other rare boards with special reboot quirks are
affected.

Reported-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: fix typo in step.c
Jan Beulich [Wed, 5 Mar 2008 08:36:48 +0000 (08:36 +0000)]
x86: fix typo in step.c

TIF_DEBUGCTLMSR has no meaning in the actual MSR...

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: fix merge mistake in i387.c
Jan Beulich [Wed, 5 Mar 2008 08:35:14 +0000 (08:35 +0000)]
x86: fix merge mistake in i387.c

convert_fxsr_to_user() in 2.6.24's i387_32.c did this, and
convert_to_fxsr() also does the inverse, so I assume it's an oversight
that it is no longer being done.

[ mingo@elte.hu:

  we encode it this way because there's no space for the 'FPU Last
  Instruction Opcode' (->fop) field in the legacy user_i387_ia32_struct
  that PTRACE_GETFPREGS/PTRACE_SETFPREGS uses.

  it's probably pure legacy - i'd be surprised if any user-space relied on
  the FPU Last Opcode in any way. But indeed we used to do it previously
  so the most conservative thing is to preserve that piece of information.
]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: clear DF before calling signal handler
Aurelien Jarno [Wed, 5 Mar 2008 18:14:24 +0000 (19:14 +0100)]
x86: clear DF before calling signal handler

The Linux kernel currently does not clear the direction flag before
calling a signal handler, whereas the x86/x86-64 ABI requires that.

Linux had this behavior/bug forever, but this becomes a real problem
with gcc version 4.3, which assumes that the direction flag is
correctly cleared at the entry of a function.

This patches changes the setup_frame() functions to clear the
direction before entering the signal handler.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: H. Peter Anvin <hpa@zytor.com>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25
Linus Torvalds [Fri, 7 Mar 2008 03:32:33 +0000 (19:32 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25:
  sh: Fix up the sh64 build.
  sh: Fix up SH7710 VoIP-GW build.
  sh: Flag PMB support as EXPERIMENTAL.
  sh: Update r7780mp defconfig.
  fb: hitfb: Balance probe/remove section annotations.
  sh: hp6xx: Fix up hp6xx_apm build failure.
  fb: pvr2fb: Fix up remaining section mismatch.
  sh: Fix up section mismatches.
  sh: hp6xx: Correct APM output.
  sh: update se7780 defconfig
  sh: replace remaining __FUNCTION__ occurrences
  sh: export copy-page() to modules
  sh_ksyms_32.c update for gcc 4.3
  sh/mm/pg-sh7705.c must #include <linux/fs.h>

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Fri, 7 Mar 2008 03:32:05 +0000 (19:32 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  [Blackfin] arch: current_l1_stack_save is a pointer, so use NULL rather than 0
  [Blackfin] arch: fix atomic and32/xor32 comments and ENDPROC markings
  [Blackfin] arch: fix bug - allow SDH driver to be used as module
  [Blackfin] arch: to kill syscalls missing warning by adding new timerfd syscalls

16 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Fri, 7 Mar 2008 03:31:34 +0000 (19:31 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] kprobes arch consolidation build fix
  [IA64] update efi region debugging to use MB, GB and TB as well as KB
  [IA64] use dev_printk in video quirk
  [IA64] remove remaining __FUNCTION__ occurrences
  [IA64] remove unnecessary nfs includes from sys_ia32.c
  [IA64] remove CONFIG_SMP ifdef in ia64_send_ipi()
  [IA64] arch_ptrace() cleanup
  [IA64] remove duplicate code from arch_ptrace()
  [IA64] convert sys_ptrace to arch_ptrace
  [IA64] remove find_thread_for_addr()
  [IA64] do not sync RBS when changing PT_AR_BSP or PT_CFM
  [IA64] access user RBS directly

16 years agoslub: fix typo in Documentation/vm/slub.txt
Itaru Kitayama [Wed, 5 Mar 2008 23:07:30 +0000 (15:07 -0800)]
slub: fix typo in Documentation/vm/slub.txt

slub_debug=,dentry is correct, not dentry_cache.

Signed-off-by: Itaru Kitayama <i-kitayama@ap.jp.nec.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
16 years agoslab: NUMA slab allocator migration bugfix
Joe Korty [Wed, 5 Mar 2008 23:04:59 +0000 (15:04 -0800)]
slab: NUMA slab allocator migration bugfix

NUMA slab allocator cpu migration bugfix

The NUMA slab allocator (specifically, cache_alloc_refill)
is not refreshing its local copies of what cpu and what
numa node it is on, when it drops and reacquires the irq
block that it inherited from its caller.  As a result
those values become invalid if an attempt to migrate the
process to another numa node occured while the irq block
had been dropped.

The solution is to make cache_alloc_refill reload these
variables whenever it drops and reacquires the irq block.

The error is very difficult to hit.  When it does occur,
one gets the following oops + stack traceback bits in
check_spinlock_acquired:

kernel BUG at mm/slab.c:2417
cache_alloc_refill+0xe6
kmem_cache_alloc+0xd0
...

This patch was developed against 2.6.23, ported to and
compiled-tested only against 2.6.25-rc4.

Signed-off-by: Joe Korty <joe.korty@ccur.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
16 years agoslub: Do not cross cacheline boundaries for very small objects
Nick Piggin [Wed, 5 Mar 2008 22:05:56 +0000 (14:05 -0800)]
slub: Do not cross cacheline boundaries for very small objects

SLUB should pack even small objects nicely into cachelines if that is what
has been asked for. Use the same algorithm as SLAB for this.

The effect of this patch for a system with a cacheline size of 64
bytes is that the 24 byte sized slab caches will now put exactly
2 objects into a cacheline instead of 3 with some overlap into
the next cacheline. This reduces the object density in a 4k slab
from 170 to 128 objects (same as SLAB).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
16 years agoslab - use angle brackets for include of kmalloc_sizes.h
Joe Perches [Wed, 5 Mar 2008 21:58:17 +0000 (13:58 -0800)]
slab - use angle brackets for include of kmalloc_sizes.h

Make them all use angle brackets and the directory name.

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
16 years agoslab numa fallback logic: Do not pass unfiltered flags to page allocator
Christoph Lameter [Tue, 4 Mar 2008 20:24:22 +0000 (12:24 -0800)]
slab numa fallback logic: Do not pass unfiltered flags to page allocator

The NUMA fallback logic should be passing local_flags to kmem_get_pages() and not simply the
flags passed in.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
16 years agoslub statistics: Fix check for DEACTIVATE_REMOTE_FREES
Christoph Lameter [Tue, 4 Mar 2008 19:10:17 +0000 (11:10 -0800)]
slub statistics: Fix check for DEACTIVATE_REMOTE_FREES

The remote frees are in the freelist of the page and not in the
percpu freelist.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
16 years ago[IA64] kprobes arch consolidation build fix
Harvey Harrison [Thu, 6 Mar 2008 17:49:01 +0000 (09:49 -0800)]
[IA64] kprobes arch consolidation build fix

ia64 named their handler kprobes_fault_handler while all other
arches used kprobe_fault_handler.  Change the function definition
and header declaration.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] update efi region debugging to use MB, GB and TB as well as KB
Simon Horman [Tue, 26 Feb 2008 06:24:04 +0000 (15:24 +0900)]
[IA64] update efi region debugging to use MB, GB and TB as well as KB

When EFI_DEBUG is defined to a non-zero value in arch/ia64/kernel/efi.c,
the efi memory regions are displayed. This patch enhances the
display code in a few ways:

1. Use TB, GB and MB as well as KB as units.
   Although this introduces rounding errors (KB doesn't as
   size is always a multiple of 4Kb), it does make
   things a lot more readable.

   Also as the range is also shown, it is possible to note the exact size
   if it is important. In my experience, the size field is mostly useful
   for getting a general idea of the size of a region.

   On the rx2620 that I use, there actually is an 8TB region (though not
   backed by physical memory, and 8TB really is a lot more readable than
   8589934592KB.

2. pad the size field with leading spaces to further improve readability

   ...
   ... (   8MB)
   ... ( 928MB)
   ... (   3MB)
   ...

   vs

   ...
   ... (8MB)
   ... (928MB)
   ... (3MB)
   ...

3. Pad the attr field out to 64bits using leading zeros,
   to further improve readability.

   ...
   mem05: type= 2, attr=0x0000000000000008, range=[0x0000000004000000-0x000000000481f000) (   8MB)
   mem06: type= 7, attr=0x0000000000000008, range=[0x000000000481f000-0x000000003e876000) ( 928MB)
   mem07: type= 5, attr=0x8000000000000008, range=[0x000000003e876000-0x000000003eb8e000) (   3MB)
   mem08: type= 4, attr=0x0000000000000008, range=[0x000000003eb8e000-0x000000003ee7a000) (   2MB)
   ...

   ...
   mem05: type= 2, attr=0x8, range=[0x0000000004000000-0x000000000481f000) (   8MB)
   mem06: type= 7, attr=0x8, range=[0x000000000481f000-0x000000003e876000) ( 928MB)
   mem07: type= 5, attr=0x8000000000000008, range=[0x000000003e876000-0x000000003eb8e000) (   3MB)
   mem08: type= 4, attr=0x8, range=[0x000000003eb8e000-0x000000003ee7a000) (   2MB)
   ...

4. Use %d instead of %u for the index field, as i is a signed int.

N.B: This code is not compiled unless EFI_DEBUG is non 0.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] use dev_printk in video quirk
Bjorn Helgaas [Tue, 4 Mar 2008 23:34:57 +0000 (16:34 -0700)]
[IA64] use dev_printk in video quirk

Convert quirk printks to dev_printk().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] remove remaining __FUNCTION__ occurrences
Harvey Harrison [Tue, 4 Mar 2008 23:15:00 +0000 (15:15 -0800)]
[IA64] remove remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Long lines have been kept where they exist, some small spacing changes
have been done.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] remove unnecessary nfs includes from sys_ia32.c
KOSAKI Motohiro [Tue, 4 Mar 2008 23:45:42 +0000 (15:45 -0800)]
[IA64] remove unnecessary nfs includes from sys_ia32.c

Compilation of 2.6.25-rc2-mm1 on ia64 generates many warnings.

IA64 support 2 ELF format (IA64 binary and IA32 binary),
thus if 2 elf related header included, cause many warning or error.

about 2 week ago, J. Bruce Fields proposed this problem fixed patch.
(http://marc.info/?l=linux-ia64&m=120329313305695&w=2)

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] remove CONFIG_SMP ifdef in ia64_send_ipi()
Bjorn Helgaas [Wed, 5 Mar 2008 22:40:32 +0000 (15:40 -0700)]
[IA64] remove CONFIG_SMP ifdef in ia64_send_ipi()

When !CONFIG_SMP, cpu_physical_id() is ia64_get_lid(), which is
functionally identical to

    (ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff

so there's no need for two versions of this code.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Thu, 6 Mar 2008 16:14:18 +0000 (08:14 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] xcbc: Fix crash with IPsec
  [CRYPTO] xts: Use proper alignment
  [CRYPTO] digest: Include internal.h for prototypes
  [CRYPTO] authenc: Add missing Kconfig dependency on BLKCIPHER
  [CRYPTO] skcipher: Move chainiv/seqiv into crypto_blkcipher module

16 years agoMerge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6
Linus Torvalds [Thu, 6 Mar 2008 16:14:00 +0000 (08:14 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] fix inode leak in xfs_iget_core()
  [XFS] 977545 977545 977545 977545 977545 977545 xfsaild causing too many

16 years agoReally unexport asm/page.h
David Woodhouse [Thu, 6 Mar 2008 10:57:54 +0000 (10:57 +0000)]
Really unexport asm/page.h

Commit ed7b1889da256977574663689b598d88950bbd23 removed page.h from
include/asm-generic/Kbuild so that it shouldn't get exported.

However, it was redundantly listed in asm-mn10300/Kbuild and
asm-x86/Kbuild too. Remove those as well, so it really stops being
exported on those architectures. Also remove the redundant listing of
ptrace.h and termios.h from mn10300.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years ago[CRYPTO] xcbc: Fix crash with IPsec
Joy Latten [Thu, 6 Mar 2008 11:28:44 +0000 (19:28 +0800)]
[CRYPTO] xcbc: Fix crash with IPsec

When using aes-xcbc-mac for authentication in IPsec,
the kernel crashes. It seems this algorithm doesn't
account for the space IPsec may make in scatterlist for authtag.
Thus when crypto_xcbc_digest_update2() gets called,
nbytes may be less than sg[i].length.
Since nbytes is an unsigned number, it wraps
at the end of the loop allowing us to go back
into loop and causing crash in memcpy.

I used update function in digest.c to model this fix.
Please let me know if it looks ok.

Signed-off-by: Joy Latten <latten@austin.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
16 years ago[CRYPTO] xts: Use proper alignment
Sebastian Siewior [Thu, 6 Mar 2008 10:56:19 +0000 (18:56 +0800)]
[CRYPTO] xts: Use proper alignment

The XTS blockmode uses a copy of the IV which is saved on the stack
and may or may not be properly aligned. If it is not, it will break
hardware cipher like the geode or padlock.
This patch encrypts the IV in place so we don't have to worry about
alignment.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Tested-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
16 years agosh: Fix up the sh64 build.
Paul Mundt [Thu, 6 Mar 2008 08:23:15 +0000 (17:23 +0900)]
sh: Fix up the sh64 build.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agosh: Fix up SH7710 VoIP-GW build.
Paul Mundt [Thu, 6 Mar 2008 07:08:00 +0000 (16:08 +0900)]
sh: Fix up SH7710 VoIP-GW build.

The only board-specific bits that existed here were for setting up the
IRQs, which are now handled by the SH7710 CPU support code instead. As
there's nothing else to do for setup, kill off the board support code
and have the defconfig use the generic machvec instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agosh: Flag PMB support as EXPERIMENTAL.
Paul Mundt [Thu, 6 Mar 2008 07:06:38 +0000 (16:06 +0900)]
sh: Flag PMB support as EXPERIMENTAL.

There's still work that needs to be done here, and this should not be
enabled by default on existing boards.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agosh: Update r7780mp defconfig.
Paul Mundt [Thu, 6 Mar 2008 07:03:58 +0000 (16:03 +0900)]
sh: Update r7780mp defconfig.

This disables the PMB/32BIT=y by default in r7780mp, as turning this on
presently results in build errors (for an admittedly experimental
feature).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years ago[XFS] fix inode leak in xfs_iget_core()
David Chinner [Thu, 6 Mar 2008 02:49:43 +0000 (13:49 +1100)]
[XFS] fix inode leak in xfs_iget_core()

If the radix_tree_preload() fails, we need to destroy the inode we just
read in before trying again. This could leak xfs_vnode structures when
there is memory pressure. Noticed by Christoph Hellwig.

SGI-PV: 977823
SGI-Modid: xfs-linux-melb:xfs-kern:30606a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
16 years ago[XFS] 977545 977545 977545 977545 977545 977545 xfsaild causing too many
David Chinner [Thu, 6 Mar 2008 02:45:10 +0000 (13:45 +1100)]
[XFS] 977545 977545 977545 977545 977545 977545 xfsaild causing too many
wakeups

Idle state is not being detected properly by the xfsaild push code. The
current idle state is detected by an empty list which may never happen
with mostly idle filesystem or one using lazy superblock counters. A
single dirty item in the list that exists beyond the push target can
result repeated looping attempting to push up to the target because it
fails to check if the push target has been acheived or not.

Fix by considering a dirty list with everything past the target as an idle
state and set the timeout appropriately.

SGI-PV: 977545
SGI-Modid: xfs-linux-melb:xfs-kern:30532a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
16 years agofb: hitfb: Balance probe/remove section annotations.
Paul Mundt [Thu, 6 Mar 2008 04:56:33 +0000 (13:56 +0900)]
fb: hitfb: Balance probe/remove section annotations.

hitfb presently has probe using __init whilst remove uses __devexit.
As this device can't possibly be hotplugged, switch to __exit and
__exit_p() instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agosh: hp6xx: Fix up hp6xx_apm build failure.
Paul Mundt [Thu, 6 Mar 2008 04:48:08 +0000 (13:48 +0900)]
sh: hp6xx: Fix up hp6xx_apm build failure.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agofb: pvr2fb: Fix up remaining section mismatch.
Paul Mundt [Thu, 6 Mar 2008 04:39:18 +0000 (13:39 +0900)]
fb: pvr2fb: Fix up remaining section mismatch.

Building with CONFIG_DEBUG_SECTION_MISMATCH=y reports:

  CC      drivers/video/pvr2fb.o
  LD      drivers/video/built-in.o
WARNING: drivers/video/built-in.o(.text+0xb9b0): Section mismatch in reference from the function pvr2fb_check_var() to the variable .devinit.data:pvr2_fix
The function pvr2fb_check_var() references
the variable __devinitdata pvr2_fix.
This is often because pvr2fb_check_var lacks a __devinitdata
annotation or the annotation of pvr2_fix is wrong.

This is obviously crap as no such reference exists, but it's a bit
closer to reality from older versions which blamed the PCI table. The
real problem was a reference to pvr2_var.vmode from pvr2fb_check_var(),
as pvr2_var is flagged as __devinitdata (pvr2_fix is also, so at least
that part is right).

pvr2_var.vmode is just a fancy way of saying FB_VMODE_NONINTERLACED, so
we just reference that explicitly instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agosh: Fix up section mismatches.
Paul Mundt [Thu, 6 Mar 2008 03:43:38 +0000 (12:43 +0900)]
sh: Fix up section mismatches.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agosh: hp6xx: Correct APM output.
Kristoffer Ericson [Wed, 5 Mar 2008 07:09:25 +0000 (23:09 -0800)]
sh: hp6xx: Correct APM output.

This patch fixes the old non-verbose hp6xx apm code and enables some
very basic apm output.  We now get percentage (battery) output
and basic time estimate.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agosh: update se7780 defconfig
goda.yusuke [Thu, 28 Feb 2008 03:53:23 +0000 (12:53 +0900)]
sh: update se7780 defconfig

This patch updates se7780_defconfig

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agosh: replace remaining __FUNCTION__ occurrences
Harvey Harrison [Tue, 4 Mar 2008 23:23:47 +0000 (15:23 -0800)]
sh: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agosh: export copy-page() to modules
Andrew Morton [Tue, 4 Mar 2008 23:23:47 +0000 (15:23 -0800)]
sh: export copy-page() to modules

ERROR: "copy_page" [fs/unionfs/unionfs.ko] undefined!

like all the other architectures.

Cc: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agosh_ksyms_32.c update for gcc 4.3
Adrian Bunk [Tue, 4 Mar 2008 22:39:58 +0000 (00:39 +0200)]
sh_ksyms_32.c update for gcc 4.3

This patch fixes the following build error with landisk_defconfig when
using gcc 4.3:

<--  snip  -->

...
  MODPOST 50 modules
ERROR: "__udivsi3_i4i" [net/sunrpc/sunrpc.ko] undefined!
ERROR: "__udivsi3_i4i" [net/appletalk/appletalk.ko] undefined!
ERROR: "__udivsi3_i4i" [fs/ufs/ufs.ko] undefined!
ERROR: "__udivsi3_i4i" [fs/ntfs/ntfs.ko] undefined!
ERROR: "__sdivsi3_i4i" [fs/ntfs/ntfs.ko] undefined!
ERROR: "__udivsi3_i4i" [fs/nfsd/nfsd.ko] undefined!
ERROR: "__sdivsi3_i4i" [fs/nfsd/nfsd.ko] undefined!
ERROR: "__udivsi3_i4i" [fs/nfs/nfs.ko] undefined!
ERROR: "__udivsi3_i4i" [fs/lockd/lockd.ko] undefined!
ERROR: "__udivsi3_i4i" [drivers/usb/storage/usb-storage.ko] undefined!
ERROR: "__sdivsi3_i4i" [drivers/usb/serial/pl2303.ko] undefined!
ERROR: "__udivsi3_i4i" [drivers/usb/serial/pl2303.ko] undefined!
ERROR: "__sdivsi3_i4i" [drivers/usb/serial/ftdi_sio.ko] undefined!
ERROR: "__udivsi3_i4i" [drivers/usb/misc/sisusbvga/sisusbvga.ko] undefined!
ERROR: "__sdivsi3_i4i" [drivers/usb/misc/sisusbvga/sisusbvga.ko] undefined!
ERROR: "__udivsi3_i4i" [drivers/media/video/v4l1-compat.ko] undefined!
ERROR: "__sdivsi3_i4i" [drivers/media/video/v4l1-compat.ko] undefined!
ERROR: "__sdivsi3_i4i" [drivers/media/video/usbvideo/vicam.ko] undefined!
ERROR: "__udivsi3_i4i" [drivers/media/video/usbvideo/usbvideo.ko] undefined!
ERROR: "__sdivsi3_i4i" [drivers/media/video/usbvideo/usbvideo.ko] undefined!
ERROR: "__udivsi3_i4i" [drivers/media/video/sn9c102/sn9c102.ko] undefined!
ERROR: "__sdivsi3_i4i" [drivers/media/video/sn9c102/sn9c102.ko] undefined!
ERROR: "__sdivsi3_i4i" [drivers/media/video/se401.ko] undefined!
ERROR: "__sdivsi3_i4i" [drivers/media/video/pwc/pwc.ko] undefined!
ERROR: "__udivsi3_i4i" [drivers/md/raid0.ko] undefined!
ERROR: "__udivsi3_i4i" [drivers/md/md-mod.ko] undefined!
ERROR: "__sdivsi3_i4i" [drivers/md/md-mod.ko] undefined!
ERROR: "__udivsi3_i4i" [drivers/md/linear.ko] undefined!
ERROR: "__sdivsi3_i4i" [drivers/hid/usbhid/usbhid.ko] undefined!
make[2]: *** [__modpost] Error 1

<--  snip  -->

Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agosh/mm/pg-sh7705.c must #include <linux/fs.h>
Adrian Bunk [Mon, 3 Mar 2008 18:07:42 +0000 (20:07 +0200)]
sh/mm/pg-sh7705.c must #include <linux/fs.h>

This patch fixes the following compile error:

<--  snip  -->

...
  CC      arch/sh/mm/pg-sh7705.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/pg-sh7705.c: In function 'ptep_get_and_clear':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/pg-sh7705.c:130: error: implicit declaration of function 'mapping_writably_mapped'
make[2]: *** [arch/sh/mm/pg-sh7705.o] Error 1

<--  snip  -->

Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years ago[Blackfin] arch: current_l1_stack_save is a pointer, so use NULL rather than 0
Mike Frysinger [Thu, 6 Mar 2008 02:02:23 +0000 (19:02 -0700)]
[Blackfin] arch: current_l1_stack_save is a pointer, so use NULL rather than 0

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
16 years agoMerge branch 'for-linus' of git://git.infradead.org/~dedekind/ubi-2.6
Linus Torvalds [Thu, 6 Mar 2008 02:00:22 +0000 (18:00 -0800)]
Merge branch 'for-linus' of git://git.infradead.org/~dedekind/ubi-2.6

* 'for-linus' of git://git.infradead.org/~dedekind/ubi-2.6:
  UBI: mtd/ubi/vtbl.c: fix memory leak
  UBI: fix sparse errors in ubi.h
  UBI: fix error message
  UBI: silence warning

16 years agoparisc: fix IOMMU's device boundary overflow bug on 32bits arch
FUJITA Tomonori [Wed, 5 Mar 2008 08:09:30 +0000 (17:09 +0900)]
parisc: fix IOMMU's device boundary overflow bug on 32bits arch

On 32bits boxes, boundary_size becomes zero due to a overflow and we
hit BUG_ON in iommu_is_span_boundary.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocpusets: fix obsolete comment
David Rientjes [Wed, 5 Mar 2008 07:32:38 +0000 (23:32 -0800)]
cpusets: fix obsolete comment

mm migration is no longer done in cpuset_update_task_memory_state() so it
can no longer take current->mm->mmap_sem, so fix the obsolete comment.

[ This changed in commit 04c19fa6f16047abff2288ddbc1f0798ede5a849
  ("cpuset: migrate all tasks in cpuset at once") when the mm migration
  was moved from cpuset_update_task_memory_state() to update_nodemask() ]

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Thu, 6 Mar 2008 01:49:59 +0000 (17:49 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (27 commits)
  [SCSI] mpt fusion: don't oops if NumPhys==0
  [SCSI] iscsi class: regression - fix races with state manipulation and blocking/unblocking
  [SCSI] qla4xxx: regression - add start scan callout
  [SCSI] qla4xxx: fix host reset dpc race
  [SCSI] tgt: fix build errors when dprintk is defined
  [SCSI] tgt: set the data length properly
  [SCSI] tgt: stop zero'ing scsi_cmnd
  [SCSI] ibmvstgt: set up scsi_host properly before __scsi_alloc_queue
  [SCSI] docbook: fix fusion source files
  [SCSI] docbook: fix scsi source file
  [SCSI] qla2xxx: Update version number to 8.02.00-k9.
  [SCSI] qla2xxx: Correct usage of inconsistent timeout values while issuing ELS commands.
  [SCSI] qla2xxx: Correct discrepancies during OVERRUN handling on FWI2-capable cards.
  [SCSI] qla2xxx: Correct needless clean-up resets during shutdown.
  [SCSI] arcmsr: update version and changelog
  [SCSI] ps3rom: disable clustering
  [SCSI] ps3rom: fix wrong resid calculation bug
  [SCSI] mvsas: fix phy sas address
  [SCSI] gdth: fix to internal commands execution
  [SCSI] gdth: bugfix for the at-exit problems
  ...

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 6 Mar 2008 01:49:38 +0000 (17:49 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  NFS: use new LSM interfaces to explicitly set mount options
  LSM/SELinux: Interfaces to allow FS to control mount options

16 years agoMerge branch 'fixes-25' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Thu, 6 Mar 2008 01:49:01 +0000 (17:49 -0800)]
Merge branch 'fixes-25' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq

* 'fixes-25' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] fix section mismatch warnings
  [CPUFREQ] Remove debugging message from e_powersaver
  [CPUFREQ] Fix missing cpufreq_cpu_put() call in ->store
  [CPUFREQ] Fix missing cpufreq_cpu_put() call in ->show

16 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Thu, 6 Mar 2008 01:47:41 +0000 (17:47 -0800)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] incorrect reipl nss name.
  [S390] Load disabled wait psw if reipl fails.
  [S390] Fix IPL from NSS.
  [S390] zcrypt: fix ap_device_list handling
  [S390] sclp_vt220: speed up console output for interactive work
  [S390] dasd: fix reference counting in display method for proc/dasd/devices
  [S390] dasd: let dasd erp matching recognize alias recovery
  [S390] Get rid of memcpy gcc warning workaround.
  [S390] idle: Fix machine check handling in idle loop.
  [S390] Update default configuration.

16 years ago[IA64] arch_ptrace() cleanup
Petr Tesarik [Tue, 26 Feb 2008 11:03:28 +0000 (12:03 +0100)]
[IA64] arch_ptrace() cleanup

Remove duplicate code, clean up goto's and indentation.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] remove duplicate code from arch_ptrace()
Petr Tesarik [Mon, 11 Feb 2008 21:43:38 +0000 (22:43 +0100)]
[IA64] remove duplicate code from arch_ptrace()

Remove all code which does exactly the same thing as ptrace_request().

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] convert sys_ptrace to arch_ptrace
Petr Tesarik [Mon, 11 Feb 2008 21:43:05 +0000 (22:43 +0100)]
[IA64] convert sys_ptrace to arch_ptrace

Convert sys_ptrace() to arch_ptrace().

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] remove find_thread_for_addr()
Petr Tesarik [Mon, 11 Feb 2008 21:42:34 +0000 (22:42 +0100)]
[IA64] remove find_thread_for_addr()

find_thread_for_addr() is no longer needed.  It was only used to find
the correct kernel RBS for a given memory address, but since the kernel
RBS is not needed any longer, this function can go away.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] do not sync RBS when changing PT_AR_BSP or PT_CFM
Petr Tesarik [Mon, 11 Feb 2008 21:42:00 +0000 (22:42 +0100)]
[IA64] do not sync RBS when changing PT_AR_BSP or PT_CFM

Syncing is no longer needed, because user RBS is already
up-to-date.  Actually, if a debugger modified the contents
of the original RBS prior to changing PT_AR_BSP, the
modifications would get overwritten.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years ago[IA64] access user RBS directly
Petr Tesarik [Mon, 11 Feb 2008 21:41:18 +0000 (22:41 +0100)]
[IA64] access user RBS directly

Because the user RBS of a process is now completely stored in
user-mode when the process is ptrace-stopped, accesses to the
RBS should no longer augment any part of the kernel RBS.

This means we can get rid of most ia64_peek() and ia64_poke()
calls.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years agoNFS: use new LSM interfaces to explicitly set mount options
Eric Paris [Wed, 5 Mar 2008 19:20:18 +0000 (14:20 -0500)]
NFS: use new LSM interfaces to explicitly set mount options

NFS and SELinux worked together previously because SELinux had NFS
specific knowledge built in.  This design was approved by both groups
back in 2004 but the recent NFS changes to use nfs_parsed_mount_data and
the usage of nfs_clone_mount_data showed this to be a poor fragile
solution.  This patch fixes the NFS functionality regression by making
use of the new LSM interfaces to allow an FS to explicitly set its own
mount options.

The explicit setting of mount options is done in the nfs get_sb
functions which are called before the generic vfs hooks try to set mount
options for filesystems which use text mount data.

This does not currently support NFSv4 as that functionality did not
exist in previous kernels and thus there is no regression.  I will be
adding the needed code, which I believe to be the exact same as the v3
code, in nfs4_get_sb for 2.6.26.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: James Morris <jmorris@namei.org>
16 years agoLSM/SELinux: Interfaces to allow FS to control mount options
Eric Paris [Wed, 5 Mar 2008 15:31:54 +0000 (10:31 -0500)]
LSM/SELinux: Interfaces to allow FS to control mount options

Introduce new LSM interfaces to allow an FS to deal with their own mount
options.  This includes a new string parsing function exported from the
LSM that an FS can use to get a security data blob and a new security
data blob.  This is particularly useful for an FS which uses binary
mount data, like NFS, which does not pass strings into the vfs to be
handled by the loaded LSM.  Also fix a BUG() in both SELinux and SMACK
when dealing with binary mount data.  If the binary mount data is less
than one page the copy_page() in security_sb_copy_data() can cause an
illegal page fault and boom.  Remove all NFSisms from the SELinux code
since they were broken by past NFS changes.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <jmorris@namei.org>
16 years ago[SCSI] mpt fusion: don't oops if NumPhys==0
Krzysztof Oledzki [Tue, 4 Mar 2008 22:56:23 +0000 (14:56 -0800)]
[SCSI] mpt fusion: don't oops if NumPhys==0

Don't oops if NumPhys==0, instead return -ENODEV.
This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=9909

Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Acked-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
16 years ago[CPUFREQ] fix section mismatch warnings
Sam Ravnborg [Sun, 17 Feb 2008 12:22:52 +0000 (13:22 +0100)]
[CPUFREQ] fix section mismatch warnings

Fix the following warnings:
WARNING: vmlinux.o(.text+0xfe6711): Section mismatch in reference from the function cpufreq_unregister_driver() to the variable .cpuinit.data:cpufreq_cpu_notifier
WARNING: vmlinux.o(.text+0xfe68af): Section mismatch in reference from the function cpufreq_register_driver() to the variable .cpuinit.data:cpufreq_cpu_notifier
WARNING: vmlinux.o(.exit.text+0xc4fa): Section mismatch in reference from the function cpufreq_stats_exit() to the variable .cpuinit.data:cpufreq_stat_cpu_notifier

The warnings were casued by references to unregister_hotcpu_notifier()
from normal functions or exit functions.
This is flagged by modpost as a potential error because
it does not know that for the non HOTPLUG_CPU
scenario the unregister_hotcpu_notifier() is a nop.
Silence the warning by replacing the __initdata
annotation with a __refdata annotation.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
16 years ago[CPUFREQ] Remove debugging message from e_powersaver
Dave Jones [Fri, 15 Feb 2008 23:11:14 +0000 (18:11 -0500)]
[CPUFREQ] Remove debugging message from e_powersaver

We don't need to printk a message every time we transition.
Leave the code there, but ifdef'd out, as it's useful when
adding support for new processors.

Reported-by: Petr Titěra <P.Titera@century.cz>
Signed-off-by: Dave Jones <davej@redhat.com>
16 years ago[CPUFREQ] Fix missing cpufreq_cpu_put() call in ->store
Dave Jones [Wed, 5 Mar 2008 19:22:25 +0000 (14:22 -0500)]
[CPUFREQ] Fix missing cpufreq_cpu_put() call in ->store

refactor to use gotos instead of explicit exit paths

Signed-off-by: Dave Jones <davej@redhat.com>