Jarkko Nikula [Mon, 2 Apr 2007 17:21:35 +0000 (13:21 -0400)]
SPI: Add support for TSC2301 protocol driver
This adds a driver for TSC2301 including support for audio, keypad and
touchscreen. Patch is originally developed for Nokia N800 by Imre Deak,
Jarkko Nikula, Jarkko Oikarinen and Juha Yrjola.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
This adds a driver for the TSC2102 chip by Texas Instruments. This
driver is responsible for all communication with the chip and doesn't
export anything for user-space, but for other drivers controlling
devices connected to the chip.
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
Timo Teräs [Mon, 5 Mar 2007 13:40:46 +0000 (05:40 -0800)]
NF: Add iptables IDLETIMER target
Each matching packet resets the timer associated with input and/or output
interfaces. Timer expiry causes a kobject uevent. Idle timer can be read via
sysfs.
Signed-off-by: Hiroshi DOYU <hiroshi.doyu@nokia.com> Signed-off-by: Juha Yrjölä <juha.yrjola@nokia.com>
Updated for 2.6.21-rc1 by Arnaud Patard.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
David Brownell [Wed, 28 Mar 2007 20:09:36 +0000 (13:09 -0700)]
ARM: OMAP: partial LED fixes
Partial fix for CONFIG_LEDS breakage ... at least allow platforms
using the debug-leds support (H4 for now) to build with the generic
LED support, and default the LED that would be the timer LED to
trigger using the "heartbeat" (timer driven, rate depends on load).
Right now only H2 and P2 seem to have working LED support; this
at least makes H4 less broken.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
David Brownell [Wed, 28 Mar 2007 20:02:09 +0000 (13:02 -0700)]
ARM: OMAP: fix H4 dependencies again
Fix Kconfig sequencing: the 2430 SDP keeps getting stuffed
in the middle of H4 dependencies, so the various H4-specific
config options aren't displayed as depending on H4.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarkko Nikula [Thu, 22 Mar 2007 09:14:57 +0000 (11:14 +0200)]
SPI: Remove sound card self registration code from the TSC2301 mixer
Feature to create and register sound card instance in tsc2301-mixer.c
was used in early development of the driver but otherwise there is no use
for it so patch removes that unused code.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Hiroshi DOYU [Wed, 21 Mar 2007 07:43:13 +0000 (09:43 +0200)]
ARM:OMAP: Add interrupt handling interface in MMU FWK
This adds the entry point in omap mmu framework to handle mmu
interrupt. Users of this framework can use its workqueue interface in
order to accomplish their irq-driven work.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 1 Feb 2007 23:38:35 +0000 (15:38 -0800)]
musb_hdrc: Add board specific external clock handling
On N800, if osc_ck is disabled by PM, USB will stop working.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Updated so some of this code can be shared with other HDRC implementations;
pretty much everything except the TUSB 6010 EVM needs a clock. This will
need more work in the future.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Wed, 28 Mar 2007 20:09:36 +0000 (13:09 -0700)]
ARM: OMAP: partial LED fixes
Partial fix for CONFIG_LEDS breakage ... at least allow platforms
using the debug-leds support (H4 for now) to build with the generic
LED support, and default the LED that would be the timer LED to
trigger using the "heartbeat" (timer driven, rate depends on load).
Right now only H2 and P2 seem to have working LED support; this
at least makes H4 less broken.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
David Brownell [Wed, 28 Mar 2007 20:02:09 +0000 (13:02 -0700)]
ARM: OMAP: fix H4 dependencies again
Fix Kconfig sequencing: the 2430 SDP keeps getting stuffed
in the middle of H4 dependencies, so the various H4-specific
config options aren't displayed as depending on H4.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
Imre Deak [Mon, 5 Mar 2007 12:50:01 +0000 (14:50 +0200)]
FB: Blizzard: sync with N800 tree
- support for per window scaling / color format attribute in
window updates
- save / restore registers over a suspend / resume, do a full screen
background update after resume to start with a clean state
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Imre Deak [Mon, 5 Mar 2007 12:17:47 +0000 (14:17 +0200)]
FB: sync with N800 tree (fix RFBI frequency lookup in tearing sync setup)
Different DPLL multiplier / divider pairs can result in frequencies
that are not exact matches of the values given by TI. When looking up
the table of known L4 / DSS1 values allow for a small difference.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Imre Deak [Mon, 5 Mar 2007 12:09:52 +0000 (14:09 +0200)]
FB: sync with N800 tree (generic FB code)
- dynamic relocation of FB mem to SRAM, SDRAM
- support for per window resizing in window updates
- fix locking in plane reconfiguration
- extended capability query for separate plane / window attributes,
and supported color formats
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Timo Teräs [Mon, 5 Mar 2007 13:40:46 +0000 (05:40 -0800)]
NF: Add iptables IDLETIMER target
Each matching packet resets the timer associated with input and/or output
interfaces. Timer expiry causes a kobject uevent. Idle timer can be read via
sysfs.
Signed-off-by: Hiroshi DOYU <hiroshi.doyu@nokia.com> Signed-off-by: Juha Yrjölä <juha.yrjola@nokia.com>
Updated for 2.6.21-rc1 by Arnaud Patard.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Imre Deak [Mon, 5 Mar 2007 15:34:05 +0000 (17:34 +0200)]
ARM: OMAP1: add SoSSI clock (remove manual checking of SoSSI state from idle)
The SoSSI driver should already take care of this by enabling / disabling
its clock when necessary, so this legacy callout from the PM idle code
is not needed any more.
Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Imre Deak [Tue, 6 Mar 2007 11:16:36 +0000 (03:16 -0800)]
ARM: OMAP: FB sync with N800 tree (support for dynamic SRAM allocations)
- in addition to fixed FB regions - as passed by the bootloader -
allow dynamic allocations
- do some more checking against overlapping / reserved regions
- move the FB specific parts out from sram.c to fb.c
Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Dirk Behme [Fri, 26 Jan 2007 21:32:30 +0000 (13:32 -0800)]
ARM: OMAP: Fix warning in pm.c
ARM: OMAP2: Fix warning in pm.c:
arch/arm/mach-omap2/pm.c: In function 'omap2_pm_init':
arch/arm/mach-omap2/pm.c:854: warning: ignoring return value
of 'subsys_create_file', declared with attribute
warn_unused_result
Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
David Brownell [Mon, 11 Dec 2006 21:25:08 +0000 (13:25 -0800)]
ARM: OMAP: musb_hdrc: tusb dma patch, minor
Move all DMAREQ for TUSB6010 into its chip setup; it shouldn't be in
either the board-specific code, or the tusb6010 glue. (Note, we still
aren't passing the "which channels" info to the driver...)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
Hiroshi DOYU [Thu, 7 Dec 2006 23:43:59 +0000 (15:43 -0800)]
ARM: OMAP: Add mailbox support for IVA
This patch adds a generic mailbox interface considering IVA
(Image Video Accelerator) use on 2420, but this patch itself
doesn't contain any IVA driver.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 7 Dec 2006 22:01:23 +0000 (14:01 -0800)]
ARM: OMAP: Avoid updating system time for sub-jiffy interrupts
Updating system time and reprogramming timer can cause latency
issues on busy systems with lots of interrupts with constant
updating of time and reprogramming the system timer.
If a non-timer dyntick interrupt happens within a jiffy from
the last interrupt, updating time and reprogramming the timer
is unnecessary as we will get a timer interrupt soon anyways.
projects / linux-2.6-omap-h63xx.git / log