ide-scsi: fix handling of DMA errors in idescsi_pc_intr()
Check return value of ->dma_end method and if there was a DMA error
handle it accordingly (set PC_FLAG_DMA_ERROR pc flag, don't update
pc->xferred and increase rq->errors).
Also move debug message in the right place while at it.
ide_do_drive_cmd is called only with ide_preempt action argument. So
we can remove the action argument in ide_do_drive_cmd and ide_action_t
typedef.
This patch also includes two minor cleanups: 1) ide_do_drive_cmd
always succeeds so we don't need the return value; 2) the callers use
blk_rq_init before ide_do_drive_cmd so there is no need to initialize
rq->errors.
ide-scsi: replace ide_do_drive_cmd with blk_execute_rq_nowait
All the callers of ide_do_drive_cmd() except for ide-scsi use
ide_preempt action argument. This converts ide-scsi to use
blk_execute_rq_nowait instead of ide_do_drive_cmd so that we can
remove the action argument in ide_do_drive_cmd and ide_action_t
typedef.
Since scc_pata host driver no longer uses IDE PCI layer / ide_dma_setup()
and all other ->mmio users set also IDE_HFLAG_MMIO host flag we can safely
remove ->mmio flag.
There should be no functional changes caused by this patch.
ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flag
Always call SELECT_MASK(..., 0) in ide_tf_load() (needs to be done
to match ide_set_irq(..., 1)) and then remove IDE_TFLAG_NO_SELECT_MASK
taskfile flag.
This change should only affect hpt366 and icside host drivers since
->maskproc(..., 0) for sgiioc4 is equivalent to ide_set_irq(..., 1).
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
block: remove the checking for NULL queue in blk_put_request
Some uses blk_put_request asymmetrically, that is, they uses it with
requests that not allocated by blk_get_request. As a result,
blk_put_request has a hack to catch a NULL request_queue. Now such
callers are fixed (they use blk_get_request properly). So we can
safely remove the hack in blk_put_request.
block: convert pd_special_command to use blk_execute_rq
pd_special_command uses blk_put_request with struct request on the
stack. As a result, blk_put_request needs a hack to catch a NULL
request_queue. This converts pd_special_command to use
blk_execute_rq.
ide_cd_init_rq is not used by ide-cd_ioctl any more. Only
cdrom_queue_request_sense use it. This converts
cdrom_queue_request_sense to use blk_rq_init directly and removes
ide_cd_init_rq.
ide: remove ide_wait/head_wait path in ide_do_drive_cmd
Now all the users of ide_do_drive_cmd using ide_wait/head_wait are
converted to use blk_execute_rq this removes the ide_wait/head_wait
path in ide_do_drive_cmd.
ide-cd: convert ide_cd_queue_pc to use blk_execute_rq
This converts ide_cd_queue_pc to use blk_execute_rq, necessitating
changing the ide_cd_queue_pc prototype into a form that doesn't takes
a pointer to request struct. ide_cd_queue_pc works like scsi_execute.
ide: use __generic_unplug_device() in ide_do_drive_cmd() (take 2)
* Call __elv_add_request() with 'plug' == 1 (so the device will be
plugged) and then use __generic_unplug_device() instead of calling
ide_do_request() directly.
v2:
* For blk_pm_resume_request() requests the queue is stopped so we
need to call ->request_fn explicitly.
Thanks to:
- Rafael for reporting/bisecting the bug
- Borislav/Rafael for testing the fix
This is a preparation for converting IDE to use blk_execute_rq().
ide: disable drive interrupts in ide_driveid_update()
Since ide_driveid_update() uses polling to execute the IDENTIFY DEVICE command
but clears nIEN bit in the control register and doesn't mask the IDE interrupt,
the latter does happen and lead to the corresponding message to appear:
ide0: unexpected interrupt, status=0x58, count=1
when e.g. running hdparm with option -X with a non-PCI IDE driver...
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
jfs: remove DIRENTSIZ
JFS: diAlloc() should return -EIO rather than EIO
JFS: skip bad iput() call in error path
JFS: switch to seq_files
JFS: 0 is not valid errno value so return NULL from jfs_lookup
Split out PCIC dependent code and SoC dependent code from board dependent
code. Now TX4927 PCIC code is independent from TX4927/TX4938 SoC code.
Also fix some build problems on CONFIG_PCI=n.
As a bonus, "FPCIB0 Backplane Support" is available for all TX39/TX49 boards
and PCI66 support is available for all TX49 boards.
[MIPS] txx9: Make gpio_txx9 entirely spinlock-safe
TXx9 GPIO set/get routines are spinlock-safe. This patch make
gpio_direction_{input,output} routines also spinlock-safe so that they
can be used during early board setup.
-ffunction-sections serves as a workaround for the problems caused by the
limited branch range in some inline assembler fragments for very large
compilation units.
[MIPS] IP28: switch to "normal" mode after PROM no longer needed
SGI-IP28 is running in so called slow mode, when kernel is started
from the PROM. PROM calls must be done in slow mode otherwise the
PROM will issue an error. To get better memory performance we now
switch to normal mode, when the PROM is no longer needed.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Dmitri Vorobiev [Wed, 18 Jun 2008 07:18:23 +0000 (10:18 +0300)]
[MIPS] Add an appropriate header into display.c
The following errors were caught by sparse:
>>>>>>>>>>>
arch/mips/mips-boards/generic/display.c:30:6: warning: symbol
'mips_display_message' was not declared. Should it be static?
arch/mips/mips-boards/generic/display.c:58:6: warning: symbol
'mips_scroll_message' was not declared. Should it be static?
>>>>>>>>>>>
This patch includes the asm/mips-boards/prom.h header file into
arch/mips/mips-boards/generic/display.c. This adds the needed
function declarations, and the errors are gone.
Compile-tested using defconfigs for Malta, Atlas and SEAD boards.
Runtime test was successfully performed by booting a Malta 4Kc
board up to the shell prompt.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Dmitri Vorobiev [Wed, 18 Jun 2008 07:18:21 +0000 (10:18 +0300)]
[MIPS] A few cleanups in malta_int.c
Both the fill_ipi_map() routine and the gic_intr_map array defined
in arch/mips/mips-boards/malta/malta_int.c are not used outside of
the latter file. Thus, these objects can become static. Moreover,
these two objects are used by the MT code only, which is why this
patch adds the appropriate ifdef.
While at it, this patch removes an unnecessary preprocessing macro
in favor of the commonly used ARRAY_SIZE.
Successfully tested using a Qemu-emulated Malta board for both SMP
and UP kernels.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Both onboard controller of the O2 support FAST-20 transfer speeds,
but the bit, which signals that to the aic driver, isn't set. Instead
of adding detection code to the scsi driver, we just fake the missing
bit in the PCI config space of the scsi chips.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
because gcc was not able to figure out that the "i" constraint was possibly
at the early stage when the constraint are getting verified. The solution
was using "ri" instead of "i". The "ri" would keep gcc happy but in the
end for code generation always the "i" constraint would be satisfied. The
problem afair originally appeared in the i386 io.h and also hit it's mips
equivalent. From there the workaround spread to many of the inline
assembler functions.]
Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
[MIPS] DECstation: Document more MB ASIC register bits
Document a few more register bits provided by the MB ASIC used on R4000SC
(KN04) and R4400SC (KN05) CPU daughtercards with the DECstation.
Reverse-engineered and not documented anywhere else to the best of my
knowledge. Bit names appended to the last underscore the same as reported
by the firmware in register dumps.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Dmitri Vorobiev [Thu, 29 May 2008 14:57:09 +0000 (17:57 +0300)]
[MIPS] Make two functions static
The following routines
uasm_rel_highest()
uasm_rel_higher()
are needlessly defined global. This patch makes them static.
Compile-tested using a customized config for the Malta board. Booting
the same board up to the shell prompt was also successful with this
patch applied.
Spotted by sparse.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The isa_slot_offset variable and its __ISA_IO_base macro is not used
anywhere anymore. It does not look like a decent interface per today's
standards either. Remove both including all places of initialization.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Merge branch 'timers/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: add PCI ID for 6300ESB force hpet
x86: add another PCI ID for ICH6 force-hpet
kernel-paramaters: document pmtmr= command line option
acpi_pm clccksource: fix printk format warning
nohz: don't stop idle tick if softirqs are pending.
pmtmr: allow command line override of ioport
nohz: reduce jiffies polling overhead
hrtimer: Remove unused variables in ktime_divns()
hrtimer: remove warning in hres_timers_resume
posix-timers: print RT watchdog message